Index: /trunk/ippconfig/ctio_mosaic2_chip/camera.config =================================================================== --- /trunk/ippconfig/ctio_mosaic2_chip/camera.config (revision 10497) +++ /trunk/ippconfig/ctio_mosaic2_chip/camera.config (revision 10497) @@ -0,0 +1,122 @@ +# Camera configuration file for MegaCam: describes the camera + +# File formats that we know about +FORMATS METADATA + MOSAIC STR ctio_mosaic2_chip/format.config +END + +# Description of camera --- all the chips and the cells that comprise them +FPA METADATA + ccd00 STR Mosaicked + ccd01 STR Mosaicked + ccd02 STR Mosaicked + ccd03 STR Mosaicked + ccd04 STR Mosaicked + ccd05 STR Mosaicked + ccd06 STR Mosaicked + ccd07 STR Mosaicked + ccd08 STR Mosaicked +END + + +# move this elsewhere? we need a lookup table to go from filter ID to abstract name +FILTER.ID METADATA + VR.Supermacho.c6027 STR VR +END + +# Recipe options +RECIPES METADATA + # Recipes for ppImage + PPIMAGE STR ctio_mosaic2_chip/ppImage.config # Default: all (normal) options on +END + + +# Rejection levels for detrend creation +REJECTION METADATA + TYPE LIMITS FILTER EXPECTED IMFILE.MEAN IMFILE.STDEV EXP.MEAN EXP.STDEV EXP.MEANSTDEV ENSEMBLE.MEAN ENSEMBLE.STDEV ENSEMBLE.MEANSTDEV IMFILE.SN EXP.SN + FLAT MULTI + + BIAS LIMITS * 0 1 5 0.5 3 0.5 3 3 0 0 0 + DARK LIMITS * 0 1 5 0.5 3 0.5 3 3 0 0 0 + FLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 +# FLAT LIMITS u 0 0 0 0 0 0 0 0 3 0 0 +# FLAT LIMITS g 0 0 0 0 0 0 0 0 3 0 0 +# FLAT LIMITS r 0 0 0 0 0 0 0 0 3 0 0 +# FLAT LIMITS i 0 0 0 0 0 0 0 0 3 0 0 +# FLAT LIMITS z 0 0 0 0 0 0 0 0 3 0 0 + FRINGE LIMITS * 0 0 0 0 0 0 0 0 0 0 0 + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. + +END + + +FILERULES METADATA + ### Redirections + PSASTRO.INPUT STR PSASTRO.INPUT.CMP + PSASTRO.OUTPUT STR PSASTRO.OUTPUT.CMP + PSPHOT.OUTPUT STR PSPHOT.OUTPUT.CMF + + ### input file definitions + TYPE INPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA DATA.LEVEL FILE.TYPE + PPIMAGE.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE + + ### use these entries to get the detrend images from specific files + PPIMAGE.MASK INPUT megacam/mask.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP MASK + PPIMAGE.BIAS INPUT megacam/bias/MEGACAM.bias.norm.1.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + PPIMAGE.DARK INPUT megacam/MEGACAM.dark.norm.2.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + PPIMAGE.FLAT INPUT megacam/MEGACAM.flat.norm.3.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + PPIMAGE.FRINGE INPUT megacam/MEGACAM.fringe.norm.4.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP FRINGE + + ### use these entries to get the detrend images from the database + #PPIMAGE.MASK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + #PPIMAGE.BIAS INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + #PPIMAGE.DARK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + #PPIMAGE.FLAT INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + + PSPHOT.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE + + PSASTRO.INPUT.CMP INPUT @FILES NONE NONE PHU CHIP CMP + PSASTRO.INPUT.CMF INPUT @FILES NONE SMPDATA PHU CHIP CMF + + ### output file definitions + TYPE OUTPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA FILE.LEVEL DATA.LEVEL FILE.TYPE FILE.SAVE FILE.FORMAT + PPIMAGE.OUTPUT OUTPUT {OUTPUT}.fits {CHIP.NAME} {CHIP.NAME} NONE FPA CHIP IMAGE TRUE NONE + PPIMAGE.OUTPUT.MASK OUTPUT {OUTPUT}.mask.fits {CHIP.NAME} {CHIP.NAME} NONE FPA CHIP MASK FALSE NONE + PPIMAGE.OUTPUT.WEIGHT OUTPUT {OUTPUT}.wt.fits {CHIP.NAME} {CHIP.NAME} NONE FPA CHIP WEIGHT FALSE NONE + PPIMAGE.BIN1 OUTPUT {OUTPUT}.b1.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA IMAGE TRUE CTIO_MOSAIC2_FPA:MOSAIC + PPIMAGE.BIN2 OUTPUT {OUTPUT}.b2.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA IMAGE TRUE CTIO_MOSAIC2_FPA:MOSAIC + + PPIMAGE.OUTPUT.CHIP OUTPUT {OUTPUT}.chip.fits {CHIP.NAME} {CHIP.NAME} NONE FPA CHIP IMAGE TRUE CTIO_MOSAIC2_CHIP:MOSAIC + PPIMAGE.OUTPUT.FPA1 OUTPUT {OUTPUT}.b1.fits NONE NONE NONE FPA FPA IMAGE TRUE CTIO_MOSAIC2_FPA:MOSAIC + PPIMAGE.OUTPUT.FPA2 OUTPUT {OUTPUT}.b2.fits NONE NONE NONE FPA FPA IMAGE TRUE CTIO_MOSAIC2_FPA:MOSAIC + + PPIMAGE.JPEG1 OUTPUT {OUTPUT}.b1.jpg -greyscale RANGE -5:20 FPA FPA JPEG TRUE CTIO_MOSAIC2_FPA:MOSAIC + PPIMAGE.JPEG2 OUTPUT {OUTPUT}.b2.jpg -greyscale FRACTION 0.50:2.00 FPA FPA JPEG TRUE CTIO_MOSAIC2_FPA:MOSAIC + + PSPHOT.RESID OUTPUT {OUTPUT}.res.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE + PSPHOT.BACKGND OUTPUT {OUTPUT}.bck.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE + PSPHOT.BACKSUB OUTPUT {OUTPUT}.sub.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE + PSPHOT.BACKMDL OUTPUT {OUTPUT}.mdl.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE + + PSPHOT.OUTPUT.RAW OUTPUT {OUTPUT}.{CHIP.NAME} NONE NONE PHU CHIP CHIP RAW TRUE NONE + PSPHOT.OUTPUT.SX OUTPUT {OUTPUT}.sx NONE NONE PHU CHIP CHIP SX TRUE NONE + PSPHOT.OUTPUT.OBJ OUTPUT {OUTPUT}.obj NONE NONE PHU CHIP CHIP OBJ TRUE NONE + PSPHOT.OUTPUT.CMF OUTPUT {OUTPUT}.cmf NONE SMPDATA PHU CHIP CHIP CMF TRUE NONE + PSPHOT.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.cmp NONE NONE PHU CHIP CHIP CMP TRUE NONE + + PSASTRO.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.smp NONE NONE PHU CHIP CHIP CMP TRUE NONE + +END Index: /trunk/ippconfig/ctio_mosaic2_chip/format.config =================================================================== --- /trunk/ippconfig/ctio_mosaic2_chip/format.config (revision 10497) +++ /trunk/ippconfig/ctio_mosaic2_chip/format.config (revision 10497) @@ -0,0 +1,112 @@ +# Format file for CTIO Mosaic2 camera used by ESSENCE + +# How to identify this type +RULE METADATA + TELESCOP STR CTIO 4.0 meter telescope + DETECTOR STR Mosaic2 Mosaicked:Chip + EXTEND BOOL T + NEXTEND S32 16 + MOSAIC +END + +# How to read this data +FILE METADATA + PHU STR FPA # The FITS file represents an entire FPA + EXTENSIONS STR CELL # The extensions represent cells + FPA.NAME STR FILENAME # A PHU keyword for unique identifier within the hierarchy level +END + +# What's in the FITS file? +CONTENTS METADATA + # Extension name, chip name:type + ccd01 STR ccd01:Mosaicked:mosaic_amp + ccd02 STR ccd02:Mosaicked:mosaic_amp + ccd03 STR ccd03:Mosaicked:mosaic_amp + ccd04 STR ccd04:Mosaicked:mosaic_amp + ccd05 STR ccd05:Mosaicked:mosaic_amp + ccd06 STR ccd06:Mosaicked:mosaic_amp + ccd07 STR ccd07:Mosaicked:mosaic_amp + ccd08 STR ccd08:Mosaicked:mosaic_amp +END + +# Specify the cell data +CELLS METADATA + mosiac_amp METADATA # Mosaicked amplifier + CELL.BIASSEC.SOURCE STR HEADER + CELL.TRIMSEC.SOURCE STR HEADER + CELL.BIASSEC STR BIASSEC + CELL.TRIMSEC STR DATASEC + END +END + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.AIRMASS STR AIRMASS + FPA.FILTER STR FILTER + FPA.RA STR RA + FPA.DEC STR DEC + FPA.RADECSYS STR RADECSYS + FPA.OBSTYPE STR OBSTYPE + FPA.OBJECT STR OBJECT + FPA.TIME STR MJD-OBS + CHIP.TEMP STR CCDTEM + CELL.EXPOSURE STR EXPTIME + CELL.DARKTIME STR DARKTIME + CELL.GAIN STR GAIN + CELL.READNOISE STR RDNOISE + CELL.SATURATION STR SATURATE + CELL.TIME STR MJD-OBS + CELL.XBIN STR CCDSUM + CELL.YBIN STR CCDSUM + + CHIP.XPARITY STR DTM1_1 + CHIP.YPARITY STR DTM2_2 + CHIP.X0 STR DTV1 + CHIP.Y0 STR DTV2 +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA + FPA.POSANGLE F32 0.0 + FPA.TIMESYS STR UTC # Header says "UTC approximate" + FPA.ALT F32 0.0 # Not present in header + FPA.AZ F32 0.0 # Not present in header + CELL.TIMESYS STR UTC # Header says "UTC approximate" + CELL.READDIR S32 1 # Cell is read in x direction + CELL.BAD S32 0 + CELL.XPARITY S32 1 + CELL.YPARITY S32 1 + CELL.X0 S32 1 + CELL.Y0 S32 1 +END + +# How to translation PS concepts into database lookups +DATABASE METADATA + TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS +# FPA.BIAS METADATA +# TABLE STR Camera +# COLUMN STR gain +# chipId STR {CHIP.NAME} +# cellId STR {CELL.NAME} +# time STR {CELL.TIME} +# END +# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME +# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME + +# A database entry refers to a particular column (COLUMN) in a +# particular table (TABLE), given certain PS concepts (GIVENPS) that +# match certain database columns (GIVENDBCOL). +END + + +# Where there might be some ambiguity, specify the format +FORMATS METADATA + FPA.RA STR HOURS + FPA.DEC STR DEGREES + FPA.TIME STR MJD + CELL.TIME STR MJD + CHIP.X0 STR FORTRAN + CHIP.Y0 STR FORTRAN + CELL.X0 STR FORTRAN + CELL.Y0 STR FORTRAN +END Index: /trunk/ippconfig/ctio_mosaic2_fpa/camera.config =================================================================== --- /trunk/ippconfig/ctio_mosaic2_fpa/camera.config (revision 10497) +++ /trunk/ippconfig/ctio_mosaic2_fpa/camera.config (revision 10497) @@ -0,0 +1,114 @@ +# Camera configuration file for MegaCam: describes the camera + +# File formats that we know about +FORMATS METADATA + MOSAIC STR ctio_mosaic2_fpa/format.config +END + +# Description of camera --- all the chips and the cells that comprise them +FPA METADATA + MosaickedChip STR MosaickedCell +END + + +# move this elsewhere? we need a lookup table to go from filter ID to abstract name +FILTER.ID METADATA + VR.Supermacho.c6027 STR VR +END + +# Recipe options +RECIPES METADATA + # Recipes for ppImage + PPIMAGE STR ctio_mosaic2_fpa/ppImage.config # Default: all (normal) options on +END + + +# Rejection levels for detrend creation +REJECTION METADATA + TYPE LIMITS FILTER EXPECTED IMFILE.MEAN IMFILE.STDEV EXP.MEAN EXP.STDEV EXP.MEANSTDEV ENSEMBLE.MEAN ENSEMBLE.STDEV ENSEMBLE.MEANSTDEV IMFILE.SN EXP.SN + FLAT MULTI + + BIAS LIMITS * 0 1 5 0.5 3 0.5 3 3 0 0 0 + DARK LIMITS * 0 1 5 0.5 3 0.5 3 3 0 0 0 + FLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 +# FLAT LIMITS u 0 0 0 0 0 0 0 0 3 0 0 +# FLAT LIMITS g 0 0 0 0 0 0 0 0 3 0 0 +# FLAT LIMITS r 0 0 0 0 0 0 0 0 3 0 0 +# FLAT LIMITS i 0 0 0 0 0 0 0 0 3 0 0 +# FLAT LIMITS z 0 0 0 0 0 0 0 0 3 0 0 + FRINGE LIMITS * 0 0 0 0 0 0 0 0 0 0 0 + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. + +END + + +FILERULES METADATA + ### Redirections + PSASTRO.INPUT STR PSASTRO.INPUT.CMP + PSASTRO.OUTPUT STR PSASTRO.OUTPUT.CMP + PSPHOT.OUTPUT STR PSPHOT.OUTPUT.CMF + + ### input file definitions + TYPE INPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA DATA.LEVEL FILE.TYPE + PPIMAGE.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE + + ### use these entries to get the detrend images from specific files + PPIMAGE.MASK INPUT megacam/mask.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP MASK + PPIMAGE.BIAS INPUT megacam/bias/MEGACAM.bias.norm.1.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + PPIMAGE.DARK INPUT megacam/MEGACAM.dark.norm.2.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + PPIMAGE.FLAT INPUT megacam/MEGACAM.flat.norm.3.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + PPIMAGE.FRINGE INPUT megacam/MEGACAM.fringe.norm.4.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP FRINGE + + ### use these entries to get the detrend images from the database + #PPIMAGE.MASK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + #PPIMAGE.BIAS INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + #PPIMAGE.DARK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + #PPIMAGE.FLAT INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE + + PSPHOT.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE + + PSASTRO.INPUT.CMP INPUT @FILES NONE NONE PHU CHIP CMP + PSASTRO.INPUT.CMF INPUT @FILES NONE SMPDATA PHU CHIP CMF + + ### output file definitions + TYPE OUTPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA FILE.LEVEL DATA.LEVEL FILE.TYPE FILE.SAVE FILE.FORMAT + PPIMAGE.OUTPUT OUTPUT {OUTPUT}.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA IMAGE TRUE NONE + PPIMAGE.OUTPUT.MASK OUTPUT {OUTPUT}.mask.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA MASK FALSE NONE + PPIMAGE.OUTPUT.WEIGHT OUTPUT {OUTPUT}.wt.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA WEIGHT FALSE NONE + PPIMAGE.BIN1 OUTPUT {OUTPUT}.b1.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA IMAGE TRUE NONE + PPIMAGE.BIN2 OUTPUT {OUTPUT}.b2.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA IMAGE TRUE NONE + + PPIMAGE.OUTPUT.CHIP OUTPUT {OUTPUT}.chip.fits {CHIP.NAME} {CHIP.NAME} NONE FPA CHIP IMAGE TRUE NONE + PPIMAGE.OUTPUT.FPA1 OUTPUT {OUTPUT}.b1.fits NONE NONE NONE FPA FPA IMAGE TRUE NONE + PPIMAGE.OUTPUT.FPA2 OUTPUT {OUTPUT}.b2.fits NONE NONE NONE FPA FPA IMAGE TRUE NONE + + PPIMAGE.JPEG1 OUTPUT {OUTPUT}.b1.jpg -greyscale RANGE -5:20 FPA FPA JPEG TRUE NONE + PPIMAGE.JPEG2 OUTPUT {OUTPUT}.b2.jpg -greyscale FRACTION 0.50:2.00 FPA FPA JPEG TRUE NONE + + PSPHOT.RESID OUTPUT {OUTPUT}.res.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE + PSPHOT.BACKGND OUTPUT {OUTPUT}.bck.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE + PSPHOT.BACKSUB OUTPUT {OUTPUT}.sub.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE + PSPHOT.BACKMDL OUTPUT {OUTPUT}.mdl.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE + + PSPHOT.OUTPUT.RAW OUTPUT {OUTPUT}.{CHIP.NAME} NONE NONE PHU CHIP CHIP RAW TRUE NONE + PSPHOT.OUTPUT.SX OUTPUT {OUTPUT}.sx NONE NONE PHU CHIP CHIP SX TRUE NONE + PSPHOT.OUTPUT.OBJ OUTPUT {OUTPUT}.obj NONE NONE PHU CHIP CHIP OBJ TRUE NONE + PSPHOT.OUTPUT.CMF OUTPUT {OUTPUT}.cmf NONE SMPDATA PHU CHIP CHIP CMF TRUE NONE + PSPHOT.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.cmp NONE NONE PHU CHIP CHIP CMP TRUE NONE + + PSASTRO.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.smp NONE NONE PHU CHIP CHIP CMP TRUE NONE + +END Index: /trunk/ippconfig/ctio_mosaic2_fpa/format.config =================================================================== --- /trunk/ippconfig/ctio_mosaic2_fpa/format.config (revision 10497) +++ /trunk/ippconfig/ctio_mosaic2_fpa/format.config (revision 10497) @@ -0,0 +1,101 @@ +# Format file for CTIO Mosaic2 camera used by ESSENCE + +# How to identify this type +RULE METADATA + TELESCOP STR CTIO 4.0 meter telescope + DETECTOR STR Mosaic2 Mosaicked:Chip + EXTEND BOOL T + NEXTEND S32 16 + MOSAIC +END + +# How to read this data +FILE METADATA + PHU STR FPA # The FITS file represents an entire FPA + EXTENSIONS STR NONE # The extensions represent cells + FPA.NAME STR FILENAME # A PHU keyword for unique identifier within the hierarchy level +END + +# What's in the FITS file? +CONTENTS STR MosaickedChip:MosaickedCell:mosaic_amp + +# Specify the cell data +CELLS METADATA + mosiac_amp METADATA # Mosaicked amplifier + CELL.BIASSEC.SOURCE STR HEADER + CELL.TRIMSEC.SOURCE STR HEADER + CELL.BIASSEC STR BIASSEC + CELL.TRIMSEC STR DATASEC + END +END + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.AIRMASS STR AIRMASS + FPA.FILTER STR FILTER + FPA.RA STR RA + FPA.DEC STR DEC + FPA.RADECSYS STR RADECSYS + FPA.OBSTYPE STR OBSTYPE + FPA.OBJECT STR OBJECT + FPA.TIME STR MJD-OBS + CHIP.TEMP STR CCDTEM + CELL.EXPOSURE STR EXPTIME + CELL.DARKTIME STR DARKTIME + CELL.GAIN STR GAIN + CELL.READNOISE STR RDNOISE + CELL.SATURATION STR SATURATE + CELL.TIME STR MJD-OBS + CELL.XBIN STR CCDSUM + CELL.YBIN STR CCDSUM +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA + FPA.POSANGLE F32 0.0 + FPA.TIMESYS STR UTC # Header says "UTC approximate" + FPA.ALT F32 0.0 # Not present in header + FPA.AZ F32 0.0 # Not present in header + CELL.TIMESYS STR UTC # Header says "UTC approximate" + CELL.READDIR S32 1 # Cell is read in x direction + CELL.BAD S32 0 + CHIP.XPARITY S32 1 + CHIP.YPARITY S32 1 + CHIP.X0 S32 1 + CHIP.Y0 S32 1 + CELL.XPARITY S32 1 + CELL.YPARITY S32 1 + CELL.X0 S32 1 + CELL.Y0 S32 1 +END + +# How to translation PS concepts into database lookups +DATABASE METADATA + TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS +# FPA.BIAS METADATA +# TABLE STR Camera +# COLUMN STR gain +# chipId STR {CHIP.NAME} +# cellId STR {CELL.NAME} +# time STR {CELL.TIME} +# END +# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME +# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME + +# A database entry refers to a particular column (COLUMN) in a +# particular table (TABLE), given certain PS concepts (GIVENPS) that +# match certain database columns (GIVENDBCOL). +END + + +# Where there might be some ambiguity, specify the format +FORMATS METADATA + FPA.RA STR HOURS + FPA.DEC STR DEGREES + FPA.TIME STR MJD + CELL.TIME STR MJD + CHIP.X0 STR FORTRAN + CHIP.Y0 STR FORTRAN + CELL.X0 STR FORTRAN + CELL.Y0 STR FORTRAN +END