Index: unk/ippconfig/ctio_mosaic2_chip/camera.config =================================================================== --- /trunk/ippconfig/ctio_mosaic2_chip/camera.config (revision 11590) +++ (revision ) @@ -1,132 +1,0 @@ -# Camera configuration file for MegaCam: describes the camera - -# File formats that we know about -FORMATS METADATA - MOSAIC STR ctio_mosaic2_chip/format.config -END - -# Description of camera --- all the chips and the cells that comprise them -FPA METADATA - ccd00 STR Mosaicked - ccd01 STR Mosaicked - ccd02 STR Mosaicked - ccd03 STR Mosaicked - ccd04 STR Mosaicked - ccd05 STR Mosaicked - ccd06 STR Mosaicked - ccd07 STR Mosaicked -END - - -# move this elsewhere? we need a lookup table to go from filter ID to abstract name -FILTER.ID METADATA - VR.Supermacho.c6027 STR VR -END - -# Recipe options -RECIPES METADATA - # Recipes for ppImage - PPIMAGE STR ctio_mosaic2/ppImage.config # Default: all (normal) options on - PSPHOT STR ctio_mosaic2/psphot.config # Default: all (normal) options on -END - - -# Rejection levels for detrend creation -REJECTION METADATA - TYPE LIMITS FILTER EXPECTED IMFILE.MEAN IMFILE.STDEV EXP.MEAN EXP.STDEV EXP.MEANSTDEV ENSEMBLE.MEAN ENSEMBLE.STDEV ENSEMBLE.MEANSTDEV IMFILE.SN EXP.SN - FLAT MULTI - SKYFLAT MULTI - DOMEFLAT MULTI - - BIAS LIMITS * 0 1 5 0.5 3 0.5 3 3 0 0 0 - DARK LIMITS * 0 1 5 0.5 3 0.5 3 3 0 0 0 - FLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 - SKYFLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 - DOMEFLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS u 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS g 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS r 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS i 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS z 0 0 0 0 0 0 0 0 3 0 0 - FRINGE LIMITS * 0 0 0 0 0 0 0 0 0 0 0 - -# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything -# EXPECTED is the expected mean value -# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation -# IMFILE.STDEV is the maximum permitted standard deviation for an imfile -# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation -# EXP.STDEV is the maximum permitted standard deviation for an exposure -# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean -# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures -# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures -# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures -# IMFILE.SN is the minimum permitted signal-to-noise for an imfile -# EXP.SN is the minimum permitted signal-to-noise for an exposure -# These values (all except FILTER) may be zero, in which case no clipping is applied. - -END - - -FILERULES METADATA - ### Redirections - PSASTRO.INPUT STR PSASTRO.INPUT.CMP - PSASTRO.OUTPUT STR PSASTRO.OUTPUT.CMP - PSPHOT.OUTPUT STR PSPHOT.OUTPUT.CMF - - ### input file definitions - TYPE INPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA DATA.LEVEL FILE.TYPE - PPIMAGE.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - ### use these entries to get the detrend images from specific files - PPIMAGE.MASK INPUT megacam/mask.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP MASK - PPIMAGE.BIAS INPUT megacam/bias/MEGACAM.bias.norm.1.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.DARK INPUT megacam/MEGACAM.dark.norm.2.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.FLAT INPUT megacam/MEGACAM.flat.norm.3.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.FRINGE INPUT megacam/MEGACAM.fringe.norm.4.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP FRINGE - - ### use these entries to get the detrend images from the database - #PPIMAGE.MASK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.BIAS INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.DARK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.FLAT INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - - PSPHOT.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - PSASTRO.INPUT.CMP INPUT @FILES NONE NONE PHU CHIP CMP - PSASTRO.INPUT.CMF INPUT @FILES NONE SMPDATA PHU CHIP CMF - - ### output file definitions - TYPE OUTPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA FILE.LEVEL DATA.LEVEL FILE.TYPE FILE.SAVE FILE.FORMAT - PPIMAGE.OUTPUT OUTPUT {OUTPUT}.fits {CHIP.NAME} {CHIP.NAME} NONE FPA CHIP IMAGE TRUE NONE - PPIMAGE.OUTPUT.MASK OUTPUT {OUTPUT}.mask.fits {CHIP.NAME} {CHIP.NAME} NONE FPA CHIP MASK FALSE NONE - PPIMAGE.OUTPUT.WEIGHT OUTPUT {OUTPUT}.wt.fits {CHIP.NAME} {CHIP.NAME} NONE FPA CHIP WEIGHT FALSE NONE - PPIMAGE.BIN1 OUTPUT {OUTPUT}.b1.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA IMAGE TRUE MOSAIC - PPIMAGE.BIN2 OUTPUT {OUTPUT}.b2.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA IMAGE TRUE MOSAIC - - PPIMAGE.OUTPUT.CHIP OUTPUT {OUTPUT}.chip.fits {CHIP.NAME} {CHIP.NAME} NONE FPA CHIP IMAGE TRUE MOSAIC - PPIMAGE.OUTPUT.FPA1 OUTPUT {OUTPUT}.b1.fits NONE NONE NONE FPA FPA IMAGE TRUE CTIO_MOSAIC2_FPA:MOSAIC - PPIMAGE.OUTPUT.FPA2 OUTPUT {OUTPUT}.b2.fits NONE NONE NONE FPA FPA IMAGE TRUE CTIO_MOSAIC2_FPA:MOSAIC - - PPIMAGE.JPEG1 OUTPUT {OUTPUT}.b1.jpg NONE NONE NONE FPA FPA JPEG TRUE CTIO_MOSAIC2_FPA:MOSAIC - PPIMAGE.JPEG2 OUTPUT {OUTPUT}.b2.jpg NONE NONE NONE FPA FPA JPEG TRUE CTIO_MOSAIC2_FPA:MOSAIC - - PSPHOT.RESID OUTPUT {OUTPUT}.res.fits NONE {CELL.NAME} {CELL.NAME} FPA CHIP IMAGE TRUE MOSAIC - PSPHOT.BACKGND OUTPUT {OUTPUT}.bck.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE MOSAIC - PSPHOT.BACKSUB OUTPUT {OUTPUT}.sub.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE MOSAIC - PSPHOT.BACKMDL OUTPUT {OUTPUT}.mdl.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE MOSAIC - - PSPHOT.OUTPUT.RAW OUTPUT {OUTPUT}.{CHIP.NAME} NONE NONE PHU CHIP CHIP RAW TRUE NONE - PSPHOT.OUTPUT.SX OUTPUT {OUTPUT}.sx NONE NONE PHU CHIP CHIP SX TRUE NONE - PSPHOT.OUTPUT.OBJ OUTPUT {OUTPUT}.obj NONE NONE PHU CHIP CHIP OBJ TRUE NONE - PSPHOT.OUTPUT.CMF OUTPUT {OUTPUT}.cmf NONE SMPDATA PHU CHIP CHIP CMF TRUE NONE - PSPHOT.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.cmp NONE NONE PHU CHIP CHIP CMP TRUE NONE - - PSPHOT.MOMENT.PLT OUTPUT {OUTPUT}.mnt.png NONE NONE NONE FPA FPA KAPA TRUE MOSAIC - PSPHOT.PSFMODEL.PLT OUTPUT {OUTPUT}.psf.png NONE NONE NONE FPA FPA KAPA TRUE MOSAIC - - SOURCE.PLOT.MOMENTS OUTPUT {OUTPUT}.mnt.png NONE NONE NONE FPA FPA KAPA TRUE MOSAIC - SOURCE.PLOT.PSFMODEL OUTPUT {OUTPUT}.psf.png NONE NONE NONE FPA FPA KAPA TRUE MOSAIC - - PSASTRO.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.smp NONE NONE PHU CHIP CHIP CMP TRUE NONE - -END Index: unk/ippconfig/ctio_mosaic2_chip/format.config =================================================================== --- /trunk/ippconfig/ctio_mosaic2_chip/format.config (revision 11590) +++ (revision ) @@ -1,138 +1,0 @@ -# Format file for CTIO Mosaic2 camera used by ESSENCE - -# How to identify this type -RULE METADATA - TELESCOP STR CTIO 4.0 meter telescope - DETECTOR STR Mosaic2 Mosaicked:Chip -END - -# How to read this data -FILE METADATA - PHU STR FPA # The FITS file represents an entire FPA - EXTENSIONS STR CHIP # The extensions represent cells - FPA.NAME STR FILENAME # A PHU keyword for unique identifier within the hierarchy level -# CHIP.NAME STR EXTNAME -# CONTENT STR {CHIP.NAME} -END - -# What's in the FITS file? -CONTENTS METADATA - # Extension name, chip name:type - ccd00 STR ccd00:Mosaicked:mosaic_amp - ccd01 STR ccd01:Mosaicked:mosaic_amp - ccd02 STR ccd02:Mosaicked:mosaic_amp - ccd03 STR ccd03:Mosaicked:mosaic_amp - ccd04 STR ccd04:Mosaicked:mosaic_amp - ccd05 STR ccd05:Mosaicked:mosaic_amp - ccd06 STR ccd06:Mosaicked:mosaic_amp - ccd07 STR ccd07:Mosaicked:mosaic_amp -END - -# Specify the cell data -CELLS METADATA - mosaic_amp METADATA # Mosaicked amplifier - CELL.BIASSEC.SOURCE STR HEADER - CELL.TRIMSEC.SOURCE STR HEADER - CELL.BIASSEC STR BIASSEC - CELL.TRIMSEC STR DATASEC - END -END - -# How to translate PS concepts into FITS headers -TRANSLATION METADATA - FPA.AIRMASS STR AIRMASS - FPA.FILTER STR FILTER - FPA.RA STR RA - FPA.DEC STR DEC - FPA.RADECSYS STR RADECSYS - FPA.OBSTYPE STR OBSTYPE - FPA.OBJECT STR OBJECT - FPA.TIME STR MJD-OBS - CHIP.TEMP STR CCDTEM - CELL.EXPOSURE STR EXPTIME - CELL.DARKTIME STR DARKTIME - CELL.GAIN STR GAIN - CELL.READNOISE STR RDNOISE - CELL.SATURATION STR SATURATE - CELL.TIME STR MJD-OBS - CELL.XBIN STR CCDSUM - CELL.YBIN STR CCDSUM -END - -# Default PS concepts that may be specified by value -DEFAULTS METADATA - FPA.POSANGLE F32 0.0 - FPA.TIMESYS STR UTC # Header says "UTC approximate" - FPA.ALT F32 0.0 # Not present in header - FPA.AZ F32 0.0 # Not present in header - CELL.TIMESYS STR UTC # Header says "UTC approximate" - CELL.READDIR S32 1 # Cell is read in x direction - CELL.BAD S32 0 - CELL.XPARITY S32 1 - CELL.YPARITY S32 1 - CELL.X0 S32 0 - CELL.Y0 S32 0 - - CHIP.XPARITY S32 1 - CHIP.X0.DEPEND STR CHIP.NAME - CHIP.X0 METADATA - ccd00 S32 0 - ccd01 S32 2048 - ccd02 S32 4096 - ccd03 S32 6144 - ccd04 S32 0 - ccd05 S32 2048 - ccd06 S32 4096 - ccd07 S32 6144 - END - CHIP.Y0.DEPEND STR CHIP.NAME - CHIP.Y0 METADATA - ccd00 S32 0 - ccd01 S32 0 - ccd02 S32 0 - ccd03 S32 0 - ccd04 S32 4096 - ccd05 S32 4096 - ccd06 S32 4096 - ccd07 S32 4096 - END - CHIP.XPARITY S32 1 - CHIP.YPARITY.DEPEND STR CHIP.NAME - CHIP.YPARITY METADATA - ccd00 S32 1 - ccd01 S32 1 - ccd02 S32 1 - ccd03 S32 1 - ccd04 S32 1 - ccd05 S32 1 - ccd06 S32 1 - ccd07 S32 1 - END -END - -# How to translation PS concepts into database lookups -DATABASE METADATA - TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS -# FPA.BIAS METADATA -# TABLE STR Camera -# COLUMN STR gain -# chipId STR {CHIP.NAME} -# cellId STR {CELL.NAME} -# time STR {CELL.TIME} -# END -# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME -# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME - -# A database entry refers to a particular column (COLUMN) in a -# particular table (TABLE), given certain PS concepts (GIVENPS) that -# match certain database columns (GIVENDBCOL). -END - - -# Where there might be some ambiguity, specify the format -FORMATS METADATA - FPA.RA STR HOURS - FPA.DEC STR DEGREES - FPA.TIME STR MJD - CELL.TIME STR MJD -END Index: unk/ippconfig/ctio_mosaic2_chip/psphot.config =================================================================== --- /trunk/ippconfig/ctio_mosaic2_chip/psphot.config (revision 11590) +++ (revision ) @@ -1,116 +1,0 @@ - -# these options turn on different inputs and/or outputs -SAVE.BACKMDL BOOL FALSE -SAVE.BACKGND BOOL FALSE -SAVE.BACKSUB BOOL FALSE -SAVE.RESID BOOL TRUE -SAVE.PSF BOOL FALSE -LOAD.PSF BOOL FALSE -SAVE.PLOTS BOOL TRUE - -# the zero point is used to set a basic scale for DVO -# XXX it may not currently be read : double check this (EAM) -ZERO_POINT F32 25.000 # zero point used by DVO - -# these parameter govern how the background is measured -BACKGROUND_XBIN S32 128 # size of background superpixels -BACKGROUND_YBIN S32 128 # size of background superpixels -IMSTATS_NPIX S32 10000 # number of pixels to use for sky estimate boxes: - -SKY_BIAS F32 0.0 # offset applied to measured sky (FOR TESTING) -SKY_FIT_ORDER S32 0 -SKY_FIT_LINEAR BOOL FALSE -SKY_STAT STR FITTED_MEAN # statistic used to measure background -# allowed values for SKY_STAT: -# SAMPLE_MEAN, SAMPLE_MEDIAN, CLIPPED_MEAN, ROBUST_MEAN, ROBUST_QUARTILE, FITTED_MEAN - -# masking parameters (XXX EAM : rework this to use psRegion like ANALYSIS_REGION) -XMIN F32 0 # minimum valid x-coord -XMAX F32 0 # maximum valid x-coord -YMIN F32 0 # minimum valid y-coord -YMAX F32 0 # maximum valid y-coord -SATURATION F32 64000 # saturation level on this chip - -# peak finding -PEAKS_SMOOTH_SIGMA F32 1.0 # smoothing kernel sigma in pixels -PEAKS_SMOOTH_NSIGMA F32 2.0 # smoothing kernel width in sigmas -PEAKS_NSIGMA_LIMIT F32 10.0 # peak significance threshold - -# parameters to control the selection of the peak in the Sx,Sy plane -MOMENTS_SCALE F32 0.1 -MOMENTS_SN_MIN F32 10.0 -MOMENTS_SX_MAX F32 3.0 -MOMENTS_SY_MAX F32 3.0 -MOMENTS_AR_MAX F32 1.5 # maximum axial ratio: 1 / AR < (sx / sy) < AR - -# basic object statistics -SKY_INNER_RADIUS F32 15 # square annulus for local sky measurement -SKY_OUTER_RADIUS F32 25 # square annulus for local sky measurement -PSF_MOMENTS_RADIUS F32 3 # calculate initial source moments with this radius -PSF_SN_LIM F32 50 # minimum S/N for stars used for PSF model -PSF_MAX_NSTARS S32 300 # limit number of stars used for PSF model - -# PSF model parameters : choose the PSF model -# list as many PSF_MODEL options as desired -# PSF_MODEL MULTI -PSF_MODEL STR PS_MODEL_GAUSS -# PSF_MODEL STR PS_MODEL_PGAUSS -# PSF_MODEL STR PS_MODEL_QGAUSS -# PSF_MODEL STR PS_MODEL_TGAUSS ## not well tested, not very successful - -# PSF.TREND.MASK must be a 2D polynomial -# the specified values are ignored but define the active components of the polynomial -PSF.TREND.MASK METADATA - NORDER_X S32 2 # number of x orders - NORDER_Y S32 2 # number of y orders - VAL_X00_Y00 F64 1 # polynomial coefficient - VAL_X01_Y00 F64 1 # polynomial coefficient - VAL_X00_Y01 F64 1 # polynomial coefficient - VAL_X02_Y00 F64 1 # polynomial coefficient - VAL_X01_Y01 F64 1 # polynomial coefficient - VAL_X00_Y02 F64 1 # polynomial coefficient - NELEMENTS S32 6 # number of unmasked components -END # folder for 2D polynomial - -PSF_FIT_RADIUS F32 15.0 # fitting radius for test PSF model -PSF_REF_RADIUS F32 25.0 # aperture magnitudes are scaled via - # curve-of-growth to this radius -# PSF-like source model parameters -PSF_FIT_NSIGMA F32 1.0 # significance for pixel included in fit -PSF_FIT_PADDING F32 2.0 # extra annulus to use for fit -PSF_SHAPE_NSIGMA F32 3.0 # max significance for shape variation -PSF_MIN_SN F32 2.0 # reject objects below this significance -PSF_MAX_CHI F32 50.0 # reject objects worse that this -FULL_FIT_SN_LIM F32 10.0 - -# EXTended source model parameters -EXT_MODEL STR PS_MODEL_PGAUSS -EXT_MIN_SN F32 50.0 # fit galaxies above this S/N limit -EXT_FIT_NSIGMA F32 1 # significance for pixel included in fit -EXT_FIT_PADDING F32 5 # extra annulus to use for fit -EXT_MOMENTS_RADIUS F32 9 - -FITMODE STR BLEND -DEBLEND_PEAK_FRACTION F32 0.1 -DEBLEND_SKY_NSIGMA F32 10.0 - -# APTREND STR NONE, CONSTANT, SKYBIAS, SKYSAT, XY_LIN, SKY_XY_LIN, SKYSAT_XY_LIN, ALL -APTREND STR CONSTANT -AP_MIN_SN F32 25.0 - -# test options -# BREAK_POINT may be one of (PEAKS, MOMENTS, PSFMODEL, ENSEMBLE) -BREAK_POINT STR MOMENTS -# PEAKS_OUTPUT_FILE STR peaks.dat -# MOMENTS_OUTPUT_FILE STR moments.dat -# ANALYSIS_REGION STR [1000:1600,2800:3400] -# POISSON_ERRORS BOOL TRUE - -# optional parameter to limit the actual analysis to a fraction of the image -# do not uncomment this in the master psphot.config file -# ANALYSIS_REGION STR [1000:1600,2800:3400] - -IGNORE_GROWTH BOOL FALSE -CONSTANT_PHOTOMETRIC_WEIGHTS BOOL TRUE # Should the photometric code [currently only ensemblePSF] refuse to weight each pixel by it's significance? -INTERPOLATE_AP BOOL TRUE -POISSON_ERRORS BOOL TRUE Index: unk/ippconfig/ctio_mosaic2_fpa/camera.config =================================================================== --- /trunk/ippconfig/ctio_mosaic2_fpa/camera.config (revision 11590) +++ (revision ) @@ -1,118 +1,0 @@ -# Camera configuration file for MegaCam: describes the camera - -# File formats that we know about -FORMATS METADATA - MOSAIC STR ctio_mosaic2_fpa/format.config -END - -# Description of camera --- all the chips and the cells that comprise them -FPA METADATA - MosaickedChip STR MosaickedCell -END - - -# move this elsewhere? we need a lookup table to go from filter ID to abstract name -FILTER.ID METADATA - VR.Supermacho.c6027 STR VR -END - -# Recipe options -RECIPES METADATA - # Recipes for ppImage - PPIMAGE STR ctio_mosaic2/ppImage.config # Default: all (normal) options on -END - - -# Rejection levels for detrend creation -REJECTION METADATA - TYPE LIMITS FILTER EXPECTED IMFILE.MEAN IMFILE.STDEV EXP.MEAN EXP.STDEV EXP.MEANSTDEV ENSEMBLE.MEAN ENSEMBLE.STDEV ENSEMBLE.MEANSTDEV IMFILE.SN EXP.SN - FLAT MULTI - SKYFLAT MULTI - DOMEFLAT MULTI - - BIAS LIMITS * 0 1 5 0.5 3 0.5 3 3 0 0 0 - DARK LIMITS * 0 1 5 0.5 3 0.5 3 3 0 0 0 - FLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 - SKYFLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 - DOMEFLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS u 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS g 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS r 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS i 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS z 0 0 0 0 0 0 0 0 3 0 0 - FRINGE LIMITS * 0 0 0 0 0 0 0 0 0 0 0 - -# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything -# EXPECTED is the expected mean value -# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation -# IMFILE.STDEV is the maximum permitted standard deviation for an imfile -# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation -# EXP.STDEV is the maximum permitted standard deviation for an exposure -# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean -# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures -# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures -# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures -# IMFILE.SN is the minimum permitted signal-to-noise for an imfile -# EXP.SN is the minimum permitted signal-to-noise for an exposure -# These values (all except FILTER) may be zero, in which case no clipping is applied. - -END - - -FILERULES METADATA - ### Redirections - PSASTRO.INPUT STR PSASTRO.INPUT.CMP - PSASTRO.OUTPUT STR PSASTRO.OUTPUT.CMP - PSPHOT.OUTPUT STR PSPHOT.OUTPUT.CMF - - ### input file definitions - TYPE INPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA DATA.LEVEL FILE.TYPE - PPIMAGE.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - ### use these entries to get the detrend images from specific files - PPIMAGE.MASK INPUT megacam/mask.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP MASK - PPIMAGE.BIAS INPUT megacam/bias/MEGACAM.bias.norm.1.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.DARK INPUT megacam/MEGACAM.dark.norm.2.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.FLAT INPUT megacam/MEGACAM.flat.norm.3.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.FRINGE INPUT megacam/MEGACAM.fringe.norm.4.0.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP FRINGE - - ### use these entries to get the detrend images from the database - #PPIMAGE.MASK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.BIAS INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.DARK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.FLAT INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - - PSPHOT.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - PSASTRO.INPUT.CMP INPUT @FILES NONE NONE PHU CHIP CMP - PSASTRO.INPUT.CMF INPUT @FILES NONE SMPDATA PHU CHIP CMF - - ### output file definitions - TYPE OUTPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA FILE.LEVEL DATA.LEVEL FILE.TYPE FILE.SAVE FILE.FORMAT - PPIMAGE.OUTPUT OUTPUT {OUTPUT}.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA IMAGE TRUE NONE - PPIMAGE.OUTPUT.MASK OUTPUT {OUTPUT}.mask.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA MASK FALSE NONE - PPIMAGE.OUTPUT.WEIGHT OUTPUT {OUTPUT}.wt.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA WEIGHT FALSE NONE - PPIMAGE.BIN1 OUTPUT {OUTPUT}.b1.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA IMAGE TRUE NONE - PPIMAGE.BIN2 OUTPUT {OUTPUT}.b2.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA IMAGE TRUE NONE - - PPIMAGE.OUTPUT.CHIP OUTPUT {OUTPUT}.chip.fits {CHIP.NAME} {CHIP.NAME} NONE FPA FPA IMAGE TRUE NONE - PPIMAGE.OUTPUT.FPA1 OUTPUT {OUTPUT}.b1.fits NONE NONE NONE FPA FPA IMAGE TRUE NONE - PPIMAGE.OUTPUT.FPA2 OUTPUT {OUTPUT}.b2.fits NONE NONE NONE FPA FPA IMAGE TRUE NONE - - PPIMAGE.JPEG1 OUTPUT {OUTPUT}.b1.jpg NONE NONE NONE FPA FPA JPEG TRUE NONE - PPIMAGE.JPEG2 OUTPUT {OUTPUT}.b2.jpg NONE NONE NONE FPA FPA JPEG TRUE NONE - - PSPHOT.RESID OUTPUT {OUTPUT}.res.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKGND OUTPUT {OUTPUT}.bck.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKSUB OUTPUT {OUTPUT}.sub.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKMDL OUTPUT {OUTPUT}.mdl.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - - PSPHOT.OUTPUT.RAW OUTPUT {OUTPUT}.{CHIP.NAME} NONE NONE PHU CHIP CHIP RAW TRUE NONE - PSPHOT.OUTPUT.SX OUTPUT {OUTPUT}.sx NONE NONE PHU CHIP CHIP SX TRUE NONE - PSPHOT.OUTPUT.OBJ OUTPUT {OUTPUT}.obj NONE NONE PHU CHIP CHIP OBJ TRUE NONE - PSPHOT.OUTPUT.CMF OUTPUT {OUTPUT}.cmf NONE SMPDATA PHU CHIP CHIP CMF TRUE NONE - PSPHOT.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.cmp NONE NONE PHU CHIP CHIP CMP TRUE NONE - - PSASTRO.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.smp NONE NONE PHU CHIP CHIP CMP TRUE NONE - -END Index: unk/ippconfig/ctio_mosaic2_fpa/format.config =================================================================== --- /trunk/ippconfig/ctio_mosaic2_fpa/format.config (revision 11590) +++ (revision ) @@ -1,98 +1,0 @@ -# Format file for CTIO Mosaic2 camera used by ESSENCE - -# How to identify this type -RULE METADATA - TELESCOP STR CTIO 4.0 meter telescope - DETECTOR STR Mosaic2 Mosaicked:FPA -END - -# How to read this data -FILE METADATA - PHU STR FPA # The FITS file represents an entire FPA - EXTENSIONS STR NONE # The extensions represent cells - FPA.NAME STR FILENAME # A PHU keyword for unique identifier within the hierarchy level -END - -# What's in the FITS file? -CONTENTS STR MosaickedChip:MosaickedCell:mosaic_amp - -# Specify the cell data -CELLS METADATA - mosaic_amp METADATA # Mosaicked amplifier - CELL.BIASSEC.SOURCE STR HEADER - CELL.TRIMSEC.SOURCE STR HEADER - CELL.BIASSEC STR BIASSEC - CELL.TRIMSEC STR DATASEC - END -END - -# How to translate PS concepts into FITS headers -TRANSLATION METADATA - FPA.AIRMASS STR AIRMASS - FPA.FILTER STR FILTER - FPA.RA STR RA - FPA.DEC STR DEC - FPA.RADECSYS STR RADECSYS - FPA.OBSTYPE STR OBSTYPE - FPA.OBJECT STR OBJECT - FPA.TIME STR MJD-OBS - CHIP.TEMP STR CCDTEM - CELL.EXPOSURE STR EXPTIME - CELL.DARKTIME STR DARKTIME - CELL.GAIN STR GAIN - CELL.READNOISE STR RDNOISE - CELL.SATURATION STR SATURATE - CELL.TIME STR MJD-OBS - CELL.XBIN STR CCDSUM - CELL.YBIN STR CCDSUM -END - -# Default PS concepts that may be specified by value -DEFAULTS METADATA - FPA.POSANGLE F32 0.0 - FPA.TIMESYS STR UTC # Header says "UTC approximate" - FPA.ALT F32 0.0 # Not present in header - FPA.AZ F32 0.0 # Not present in header - CELL.TIMESYS STR UTC # Header says "UTC approximate" - CELL.READDIR S32 1 # Cell is read in x direction - CELL.BAD S32 0 - CHIP.XPARITY S32 1 - CHIP.YPARITY S32 1 - CHIP.X0 S32 1 - CHIP.Y0 S32 1 - CELL.XPARITY S32 1 - CELL.YPARITY S32 1 - CELL.X0 S32 1 - CELL.Y0 S32 1 -END - -# How to translation PS concepts into database lookups -DATABASE METADATA - TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS -# FPA.BIAS METADATA -# TABLE STR Camera -# COLUMN STR gain -# chipId STR {CHIP.NAME} -# cellId STR {CELL.NAME} -# time STR {CELL.TIME} -# END -# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME -# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME - -# A database entry refers to a particular column (COLUMN) in a -# particular table (TABLE), given certain PS concepts (GIVENPS) that -# match certain database columns (GIVENDBCOL). -END - - -# Where there might be some ambiguity, specify the format -FORMATS METADATA - FPA.RA STR HOURS - FPA.DEC STR DEGREES - FPA.TIME STR MJD - CELL.TIME STR MJD - CHIP.X0 STR FORTRAN - CHIP.Y0 STR FORTRAN - CELL.X0 STR FORTRAN - CELL.Y0 STR FORTRAN -END Index: unk/ippconfig/mcshort_chip/camera.config =================================================================== --- /trunk/ippconfig/mcshort_chip/camera.config (revision 11590) +++ (revision ) @@ -1,169 +1,0 @@ -# File formats that we know about (these are relative to PATH) -FORMATS METADATA - MOSAIC STR mcshort_chip/format_mosaic.config -END - - -# Description of camera --- all the chips and the cells that comprise them -FPA METADATA -# ccd00 STR Cell -# ccd01 STR Cell -# ccd02 STR Cell -# ccd03 STR Cell -# ccd04 STR Cell -# ccd05 STR Cell -# ccd06 STR Cell -# ccd07 STR Cell -# ccd08 STR Cell -# ccd09 STR Cell -# ccd10 STR Cell -# ccd11 STR Cell - ccd12 STR Cell - ccd13 STR Cell - ccd14 STR Cell -# ccd15 STR Cell -# ccd16 STR Cell -# ccd17 STR Cell -# ccd18 STR Cell -# ccd19 STR Cell -# ccd20 STR Cell - ccd21 STR Cell - ccd22 STR Cell - ccd23 STR Cell -# ccd24 STR Cell -# ccd25 STR Cell -# ccd26 STR Cell -# ccd27 STR Cell -# ccd28 STR Cell -# ccd29 STR Cell -# ccd30 STR Cell -# ccd31 STR Cell -# ccd32 STR Cell -# ccd33 STR Cell -# ccd34 STR Cell -# ccd35 STR Cell -END - -# move this elsewhere? we need a lookup table to go from filter ID to abstract name -FILTER.ID METADATA - u.MP9301 STR u - g.MP9401 STR g - r.MP9601 STR r - i.MP9701 STR i - z.MP9801 STR z - Zp STR z - Zprime STR z - Ha.MP7605 STR Ha - Halpha STR Ha - Haalpha.on STR Ha - HaOFF.MP7604 STR HaOff - - CN.MP780 STR CN - cn.MP7803 STR CN - CN.MP7803 STR CN - - TiO.MP77 STR TiO - tio.MP7701 STR TiO - TiO.MP7701 STR TiO - NB920 STR NB920 - - B2F STR B2F - Bj STR Bj - Vj STR Vj - Rj STR Rj - Ij STR Ij - Hb STR Hb - HbOff STR HbOff -END - -# Recipe options -RECIPES METADATA - # Recipes for ppImage - PPIMAGE STR megacam/ppImage.config # Default: all (normal) options on - PPIMAGE_O STR megacam/ppImage_o.config # Overscan - PPIMAGE_OB STR megacam/ppImage_ob.config # Overscan, bias - PPIMAGE_OBD STR megacam/ppImage_obd.config # Overscan, bias, dark - PPIMAGE_OBDS STR megacam/ppImage_obds.config # Overscan, bias, dark, shutter, flat - PPIMAGE_OBDSF STR megacam/ppImage_obdsf.config # Overscan, bias, dark, shutter, flat - PPIMAGE_OBDSFR STR megacam/ppImage_obdsfr.config # Overscan, bias, dark, shutter, flat, fringe - PPIMAGE_B STR megacam/ppImage_b.config # Bias only - PPIMAGE_D STR megacam/ppImage_d.config # Dark only - PPIMAGE_S STR megacam/ppImage_n.config # NOTHING --- no need for shutter yet - PPIMAGE_F STR megacam/ppImage_f.config # Flat only - PPIMAGE_R STR megacam/ppImage_r.config # Fringe only - PPIMAGE_J1 STR megacam/ppImage_j1.config # JPEG only; binning 1 - PPIMAGE_J2 STR megacam/ppImage_j2.config # JPEG only; binning 2 - PPIMAGE_N STR megacam/ppImage_n.config # Nothing significant; binning only - - # Recipes for ppMerge - PPMERGE STR ppMerge_template.config # ppMerge recipe - PPMERGE_BIAS STR megacam/ppMerge_bias.config - PPMERGE_DARK STR megacam/ppMerge_dark.config - PPMERGE_FLAT STR megacam/ppMerge_flat.config - PPMERGE_FRINGE STR megacam/ppMerge_fringe.config - - # Other recipes - PSPHOT STR megacam/psphot.config # psphot details - PSASTRO STR megacam/psastro.config # psastro details - PPSTATS STR megacam/ppStats.config # ppStats recipe -END - -FILERULES METADATA - ### Redirections - PSASTRO.INPUT STR PSASTRO.INPUT.CMP - PSASTRO.OUTPUT STR PSASTRO.OUTPUT.CMP - PSPHOT.OUTPUT STR PSPHOT.OUTPUT.CMF - - ### input file definitions - TYPE INPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA DATA.LEVEL FILE.TYPE - PPIMAGE.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - PPARITH.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - ### use these entries to get the detrend images from specific files - PPIMAGE.MASK INPUT mask.mef.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.BIAS INPUT bias_{CHIP.NAME}_1_0.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.DARK INPUT dark_{CHIP.NAME}_2_0.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.FLAT INPUT flat_{CHIP.NAME}_3_0.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - - ### use these entries to get the detrend images from the database - #PPIMAGE.MASK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.BIAS INPUT @DETDB fpa fpa NONE CHIP IMAGE - #PPIMAGE.DARK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.FLAT INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - - PSPHOT.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - PSASTRO.INPUT.CMP INPUT @FILES NONE NONE PHU CHIP CMP - PSASTRO.INPUT.CMF INPUT @FILES NONE SMPDATA PHU CHIP CMF - - ### output file definitions - TYPE OUTPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA FILE.LEVEL DATA.LEVEL FILE.TYPE FILE.SAVE FILE.FORMAT - PPIMAGE.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE NONE - PPIMAGE.OUTPUT.MASK OUTPUT {OUTPUT}.{CHIP.NAME}.mask.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP MASK FALSE NONE - PPIMAGE.OUTPUT.WEIGHT OUTPUT {OUTPUT}.{CHIP.NAME}.wt.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP WEIGHT FALSE NONE - PPIMAGE.BIN1 OUTPUT {OUTPUT}.{CHIP.NAME}.b1.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE MOSAIC - PPIMAGE.BIN2 OUTPUT {OUTPUT}.{CHIP.NAME}.b2.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE MOSAIC - - PPIMAGE.OUTPUT.CHIP OUTPUT {OUTPUT}.{CHIP.NAME}.chip.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE MOSAIC - PPIMAGE.OUTPUT.FPA1 OUTPUT {OUTPUT}.b1.fit NONE NONE NONE FPA FPA IMAGE TRUE MCSHORT_FPA:MOSAIC - PPIMAGE.OUTPUT.FPA2 OUTPUT {OUTPUT}.b2.fit NONE NONE NONE FPA FPA IMAGE TRUE MCSHORT_FPA:MOSAIC - - PPIMAGE.JPEG1 OUTPUT {OUTPUT}.b1.jpg NONE NONE NONE FPA FPA JPEG TRUE MCSHORT_FPA:MOSAIC - PPIMAGE.JPEG2 OUTPUT {OUTPUT}.b2.jpg NONE NONE NONE FPA FPA JPEG TRUE MCSHORT_FPA:MOSAIC - - PSPHOT.RESID OUTPUT {OUTPUT}.res.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKGND OUTPUT {OUTPUT}.bck.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKSUB OUTPUT {OUTPUT}.sub.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKMDL OUTPUT {OUTPUT}.mdl.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - - PSPHOT.OUTPUT.RAW OUTPUT {OUTPUT}.{CHIP.NAME} NONE NONE PHU CHIP CHIP RAW TRUE NONE - PSPHOT.OUTPUT.SX OUTPUT {OUTPUT}.sx NONE NONE PHU CHIP CHIP SX TRUE NONE - PSPHOT.OUTPUT.OBJ OUTPUT {OUTPUT}.obj NONE NONE PHU CHIP CHIP OBJ TRUE NONE - PSPHOT.OUTPUT.CMF OUTPUT {OUTPUT}.cmf NONE SMPDATA PHU CHIP CHIP CMF TRUE NONE - PSPHOT.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.cmp NONE NONE PHU CHIP CHIP CMP TRUE NONE - - PSASTRO.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.smp NONE NONE PHU CHIP CHIP CMP TRUE NONE - - PPARITH.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE NONE - -END Index: unk/ippconfig/mcshort_chip/format_mosaic.config =================================================================== --- /trunk/ippconfig/mcshort_chip/format_mosaic.config (revision 11590) +++ (revision ) @@ -1,205 +1,0 @@ -# The spliced MecaCam data is stored in single extensions for each chip - -# How to recognise this type -RULE METADATA - TELESCOP STR CFHT 3.6m - DETECTOR STR MegaCam Mosaicked:Chip -END - -FILE METADATA - # How to read this data - PHU STR CHIP # The FITS file represents an entire FPA - EXTENSIONS STR NONE # The extensions represent chips - FPA.NAME STR EXPNUM # A PHU keyword for unique identifier - CHIP.NAME STR EXTNAME # A PHU keyword for unique identifier - CONTENT STR {CHIP.NAME} # A string to index the CONTENTS menu; required because EXT=NONE -END - -# What's in the FITS file? -CONTENTS METADATA - # Extension name, chip name:component cell -# ccd00 STR ccd00:Cell:mosaic -# ccd01 STR ccd01:Cell:mosaic -# ccd02 STR ccd02:Cell:mosaic -# ccd03 STR ccd03:Cell:mosaic -# ccd04 STR ccd04:Cell:mosaic -# ccd05 STR ccd05:Cell:mosaic -# ccd06 STR ccd06:Cell:mosaic -# ccd07 STR ccd07:Cell:mosaic -# ccd08 STR ccd08:Cell:mosaic -# ccd09 STR ccd09:Cell:mosaic -# ccd10 STR ccd10:Cell:mosaic -# ccd11 STR ccd11:Cell:mosaic - ccd12 STR ccd12:Cell:mosaic - ccd13 STR ccd13:Cell:mosaic - ccd14 STR ccd14:Cell:mosaic -# ccd15 STR ccd15:Cell:mosaic -# ccd16 STR ccd16:Cell:mosaic -# ccd17 STR ccd17:Cell:mosaic -# ccd18 STR ccd18:Cell:mosaic -# ccd19 STR ccd19:Cell:mosaic -# ccd20 STR ccd20:Cell:mosaic - ccd21 STR ccd21:Cell:mosaic - ccd22 STR ccd22:Cell:mosaic - ccd23 STR ccd23:Cell:mosaic -# ccd24 STR ccd24:Cell:mosaic -# ccd25 STR ccd25:Cell:mosaic -# ccd26 STR ccd26:Cell:mosaic -# ccd27 STR ccd27:Cell:mosaic -# ccd28 STR ccd28:Cell:mosaic -# ccd29 STR ccd29:Cell:mosaic -# ccd30 STR ccd30:Cell:mosaic -# ccd31 STR ccd31:Cell:mosaic -# ccd32 STR ccd32:Cell:mosaic -# ccd33 STR ccd33:Cell:mosaic -# ccd34 STR ccd34:Cell:mosaic -# ccd35 STR ccd35:Cell:mosaic -END - -# Specify the cells -CELLS METADATA - mosaic METADATA - CELL.BIASSEC.SOURCE STR HEADER - CELL.TRIMSEC.SOURCE STR HEADER - CELL.BIASSEC STR BIASSEC - CELL.TRIMSEC STR TRIMSEC - END -END - -# How to translate PS concepts into FITS headers -TRANSLATION METADATA - FPA.NAME STR EXPNUM - FPA.AIRMASS STR AIRMASS - FPA.FILTER STR FILTER - FPA.POSANGLE STR ROTANGLE - FPA.RA STR RA - FPA.DEC STR DEC - FPA.RADECSYS STR RADECSYS - FPA.OBSTYPE STR OBSTYPE - FPA.OBJECT STR CMMTOBS - FPA.ALT STR TELALT - FPA.AZ STR TELAZ - CHIP.TEMP STR DETTEM - CELL.EXPOSURE STR EXPTIME - CELL.DARKTIME STR DARKTIME - CELL.GAIN STR GAIN - CELL.READNOISE STR RDNOISE - CELL.SATURATION STR SATURATE - CELL.TIME STR MJD-OBS - CELL.XBIN STR CCDBIN1 - CELL.YBIN STR CCDBIN2 -END - -# Default PS concepts that may be specified by value -DEFAULTS METADATA - CELL.READDIR S32 1 # Cell is read in x direction - CELL.BAD S32 0 - CELL.TIMESYS STR UTC - CELL.XPARITY S32 1 - CELL.YPARITY S32 1 - CELL.X0 S32 0 - CELL.Y0 S32 0 - - CHIP.XPARITY S32 1 - CHIP.YPARITY S32 1 - CHIP.X0.DEPEND STR CHIP.NAME - CHIP.X0 METADATA -# ccd00 S32 -# ccd01 S32 -# ccd02 S32 -# ccd03 S32 -# ccd04 S32 -# ccd05 S32 -# ccd06 S32 -# ccd07 S32 -# ccd08 S32 -# ccd09 S32 -# ccd10 S32 -# ccd11 S32 - ccd12 S32 0 - ccd13 S32 2048 - ccd14 S32 4096 -# ccd15 S32 -# ccd16 S32 -# ccd17 S32 -# ccd18 S32 -# ccd19 S32 -# ccd20 S32 - ccd21 S32 0 - ccd22 S32 2048 - ccd23 S32 4096 -# ccd24 S32 -# ccd25 S32 -# ccd26 S32 -# ccd27 S32 -# ccd28 S32 -# ccd29 S32 -# ccd30 S32 -# ccd31 S32 -# ccd32 S32 -# ccd33 S32 -# ccd34 S32 -# ccd35 S32 - END - CHIP.Y0.DEPEND STR CHIP.NAME - CHIP.Y0 METADATA -# ccd00 S32 -# ccd01 S32 -# ccd02 S32 -# ccd03 S32 -# ccd04 S32 -# ccd05 S32 -# ccd06 S32 -# ccd07 S32 -# ccd08 S32 -# ccd09 S32 -# ccd10 S32 -# ccd11 S32 - ccd12 S32 4612 - ccd13 S32 4612 - ccd14 S32 4612 -# ccd15 S32 -# ccd16 S32 -# ccd17 S32 -# ccd18 S32 -# ccd19 S32 -# ccd20 S32 - ccd21 S32 0 - ccd22 S32 0 - ccd23 S32 0 -# ccd24 S32 -# ccd25 S32 -# ccd26 S32 -# ccd27 S32 -# ccd28 S32 -# ccd29 S32 -# ccd30 S32 -# ccd31 S32 -# ccd32 S32 -# ccd33 S32 -# ccd34 S32 -# ccd35 S32 - END -END - - -# How to translation PS concepts into database lookups -DATABASE METADATA - TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS -# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME -# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME - -# A database entry refers to a particular column (COLUMN) in a -# particular table (TABLE), given certain PS concepts (GIVENPS) that -# match certain database columns (GIVENDBCOL). -END - - -# Where there might be some ambiguity, specify the format -FORMATS METADATA - FPA.RA STR HOURS - FPA.DEC STR DEGREES - CELL.TIME STR MJD -END - - Index: unk/ippconfig/mcshort_fpa/camera.config =================================================================== --- /trunk/ippconfig/mcshort_fpa/camera.config (revision 11590) +++ (revision ) @@ -1,105 +1,0 @@ -# Camera configuration file for MegaCam: describes the camera - -# File formats that we know about (these are relative to PATH) -FORMATS METADATA - MOSAIC STR mcshort_fpa/format_mosaic.config -END - - -# Description of camera --- all the chips and the cells that comprise them -FPA METADATA - Chip STR Cell -END - - -# Recipe options -RECIPES METADATA - # Recipes for ppImage - PPIMAGE STR megacam/ppImage.config # Default: all (normal) options on - PPIMAGE_O STR megacam/ppImage_o.config # Overscan - PPIMAGE_OB STR megacam/ppImage_ob.config # Overscan, bias - PPIMAGE_OBD STR megacam/ppImage_obd.config # Overscan, bias, dark - PPIMAGE_OBDS STR megacam/ppImage_obds.config # Overscan, bias, dark, shutter, flat - PPIMAGE_OBDSF STR megacam/ppImage_obdsf.config # Overscan, bias, dark, shutter, flat - PPIMAGE_OBDSFR STR megacam/ppImage_obdsfr.config # Overscan, bias, dark, shutter, flat, fringe - PPIMAGE_B STR megacam/ppImage_b.config # Bias only - PPIMAGE_D STR megacam/ppImage_d.config # Dark only - PPIMAGE_S STR megacam/ppImage_n.config # NOTHING --- no need for shutter yet - PPIMAGE_F STR megacam/ppImage_f.config # Flat only - PPIMAGE_R STR megacam/ppImage_r.config # Fringe only - PPIMAGE_J1 STR megacam/ppImage_j1.config # JPEG only; binning 1 - PPIMAGE_J2 STR megacam/ppImage_j2.config # JPEG only; binning 2 - PPIMAGE_N STR megacam/ppImage_n.config # Nothing significant; binning only - - # Recipes for ppMerge - PPMERGE STR ppMerge_template.config # ppMerge recipe - PPMERGE_BIAS STR megacam/ppMerge_bias.config - PPMERGE_DARK STR megacam/ppMerge_dark.config - PPMERGE_FLAT STR megacam/ppMerge_flat.config - PPMERGE_FRINGE STR megacam/ppMerge_fringe.config - - # Other recipes - PSPHOT STR megacam/psphot.config # psphot details - PSASTRO STR megacam/psastro.config # psastro details - PPSTATS STR megacam/ppStats.config # ppStats recipe -END - -FILERULES METADATA - ### Redirections - PSASTRO.INPUT STR PSASTRO.INPUT.CMP - PSASTRO.OUTPUT STR PSASTRO.OUTPUT.CMP - PSPHOT.OUTPUT STR PSPHOT.OUTPUT.CMF - - ### input file definitions - TYPE INPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA DATA.LEVEL FILE.TYPE - PPIMAGE.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - PPARITH.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - ### use these entries to get the detrend images from specific files - PPIMAGE.MASK INPUT mask.mef.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.BIAS INPUT bias_{CHIP.NAME}_1_0.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.DARK INPUT dark_{CHIP.NAME}_2_0.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.FLAT INPUT flat_{CHIP.NAME}_3_0.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - - ### use these entries to get the detrend images from the database - #PPIMAGE.MASK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.BIAS INPUT @DETDB fpa fpa NONE CHIP IMAGE - #PPIMAGE.DARK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.FLAT INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - - PSPHOT.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - PSASTRO.INPUT.CMP INPUT @FILES NONE NONE PHU CHIP CMP - PSASTRO.INPUT.CMF INPUT @FILES NONE SMPDATA PHU CHIP CMF - - ### output file definitions - TYPE OUTPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA FILE.LEVEL DATA.LEVEL FILE.TYPE FILE.SAVE FILE.FORMAT - PPIMAGE.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE NONE - PPIMAGE.OUTPUT.MASK OUTPUT {OUTPUT}.{CHIP.NAME}.mask.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP MASK FALSE NONE - PPIMAGE.OUTPUT.WEIGHT OUTPUT {OUTPUT}.{CHIP.NAME}.wt.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP WEIGHT FALSE NONE - PPIMAGE.BIN1 OUTPUT {OUTPUT}.{CHIP.NAME}.b1.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE NONE - PPIMAGE.BIN2 OUTPUT {OUTPUT}.{CHIP.NAME}.b2.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE NONE - - PPIMAGE.OUTPUT.CHIP OUTPUT {OUTPUT}.{CHIP.NAME}.chip.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE MOSAIC - PPIMAGE.OUTPUT.FPA1 OUTPUT {OUTPUT}.b1.fit NONE NONE NONE FPA FPA IMAGE FALSE MOSAIC - PPIMAGE.OUTPUT.FPA2 OUTPUT {OUTPUT}.b2.fit NONE NONE NONE FPA FPA IMAGE FALSE MOSAIC - - PPIMAGE.JPEG1 OUTPUT {OUTPUT}.b1.jpg NONE NONE NONE FPA FPA JPEG TRUE NONE - PPIMAGE.JPEG2 OUTPUT {OUTPUT}.b2.jpg NONE NONE NONE FPA FPA JPEG TRUE NONE - - PSPHOT.RESID OUTPUT {OUTPUT}.res.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKGND OUTPUT {OUTPUT}.bck.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKSUB OUTPUT {OUTPUT}.sub.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKMDL OUTPUT {OUTPUT}.mdl.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - - PSPHOT.OUTPUT.RAW OUTPUT {OUTPUT}.{CHIP.NAME} NONE NONE PHU CHIP CHIP RAW TRUE NONE - PSPHOT.OUTPUT.SX OUTPUT {OUTPUT}.sx NONE NONE PHU CHIP CHIP SX TRUE NONE - PSPHOT.OUTPUT.OBJ OUTPUT {OUTPUT}.obj NONE NONE PHU CHIP CHIP OBJ TRUE NONE - PSPHOT.OUTPUT.CMF OUTPUT {OUTPUT}.cmf NONE SMPDATA PHU CHIP CHIP CMF TRUE NONE - PSPHOT.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.cmp NONE NONE PHU CHIP CHIP CMP TRUE NONE - - PSASTRO.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.smp NONE NONE PHU CHIP CHIP CMP TRUE NONE - - PPARITH.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE NONE - -END Index: unk/ippconfig/mcshort_fpa/format_mosaic.config =================================================================== --- /trunk/ippconfig/mcshort_fpa/format_mosaic.config (revision 11590) +++ (revision ) @@ -1,88 +1,0 @@ -# The spliced MecaCam data is stored in single extensions for each chip - -# How to recognise this type -RULE METADATA - TELESCOP STR CFHT 3.6m - DETECTOR STR MegaCam Mosaicked:FPA -END - -FILE METADATA - # How to read this data - PHU STR FPA # The FITS file represents an entire FPA - EXTENSIONS STR NONE # The extensions represent chips - FPA.NAME STR EXPNUM # A PHU keyword for unique identifier -END - -# What's in the FITS file? -CONTENTS STR Chip:Cell:mosaic - -# Specify the cells -CELLS METADATA - mosaic METADATA - CELL.BIASSEC.SOURCE STR HEADER - CELL.TRIMSEC.SOURCE STR HEADER - CELL.BIASSEC STR BIASSEC - CELL.TRIMSEC STR TRIMSEC - END -END - -# How to translate PS concepts into FITS headers -TRANSLATION METADATA - FPA.NAME STR EXPNUM - FPA.AIRMASS STR AIRMASS - FPA.FILTER STR FILTER - FPA.POSANGLE STR ROTANGLE - FPA.RA STR RA - FPA.DEC STR DEC - FPA.RADECSYS STR RADECSYS - FPA.OBSTYPE STR OBSTYPE - FPA.OBJECT STR CMMTOBS - FPA.ALT STR TELALT - FPA.AZ STR TELAZ - CHIP.TEMP STR DETTEM - CELL.EXPOSURE STR EXPTIME - CELL.DARKTIME STR DARKTIME - CELL.GAIN STR GAIN - CELL.READNOISE STR RDNOISE - CELL.SATURATION STR SATURATE - CELL.TIME STR MJD-OBS - CELL.XBIN STR CCDBIN1 - CELL.YBIN STR CCDBIN2 -END - -# Default PS concepts that may be specified by value -DEFAULTS METADATA - CELL.READDIR S32 1 # Cell is read in x direction - CELL.BAD S32 0 - CELL.TIMESYS STR UTC - CELL.XPARITY S32 1 - CELL.YPARITY S32 1 - CHIP.XPARITY S32 1 - CHIP.YPARITY S32 1 - CHIP.X0 S32 0 - CHIP.X0 S32 0 - CELL.X0 S32 0 - CELL.Y0 S32 0 -END - - -# How to translation PS concepts into database lookups -DATABASE METADATA - TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS -# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME -# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME - -# A database entry refers to a particular column (COLUMN) in a -# particular table (TABLE), given certain PS concepts (GIVENPS) that -# match certain database columns (GIVENDBCOL). -END - - -# Where there might be some ambiguity, specify the format -FORMATS METADATA - FPA.RA STR HOURS - FPA.DEC STR DEGREES - CELL.TIME STR MJD -END - - Index: unk/ippconfig/megacam_alternate/camera.config =================================================================== --- /trunk/ippconfig/megacam_alternate/camera.config (revision 11590) +++ (revision ) @@ -1,67 +1,0 @@ -# Camera configuration file for drop-dead boring camera, consisting of a single chip with single cell. - -# File formats that we know about -FORMATS METADATA - SIMPLE STR megacam_alternate/format.config -END - - -# Description of camera --- all the chips and the cells that comprise them -FPA METADATA - Chip STR Cell -END - -# Recipe options -RECIPES METADATA - PHASE2 STR megacam_alternate/phase2.config # Phase 2 recipe details - PSPHOT STR megacam_alternate/psphot.config # psphot details -END - -FILERULES METADATA - PPIMAGE.OUTPUT STR PPIMAGE.OUTPUT.SPL - PSASTRO.INPUT STR PSASTRO.INPUT.CMP - PSASTRO.OUTPUT STR PSASTRO.OUTPUT.CMP - PSPHOT.OUTPUT STR PSPHOT.OUTPUT.RAW - - ### input file definitions - TYPE INPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA DATA.LEVEL FILE.TYPE - PPIMAGE.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - ### use these entries to get the detrend images from specific files - PPIMAGE.MASK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.BIAS INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.DARK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.FLAT INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - - PSPHOT.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - PSASTRO.INPUT.CMP INPUT @FILES NONE NONE PHU CHIP CMP - PSASTRO.INPUT.CMF INPUT @FILES NONE SMPDATA PHU CHIP CMF - - ### output file definitions - TYPE OUTPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA FILE.LEVEL DATA.LEVEL FILE.TYPE FILE.SAVE FILE.FORMAT - PPIMAGE.OUTPUT.SPL OUTPUT {OUTPUT}.{CHIP.NAME}.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE NONE - PPIMAGE.OUTPUT.MEF OUTPUT {OUTPUT}.fit {CHIP.NAME} {CHIP.NAME} NONE FPA CHIP IMAGE TRUE NONE - - PPIMAGE.OUTPUT.CHIP OUTPUT {OUTPUT}.{CHIP.NAME}.mos.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE MEGACAM_CHIP:MOSAIC - PPIMAGE.OUTPUT.FPA1 OUTPUT {OUTPUT}.b1.fit {CHIP.NAME} {CHIP.NAME} NONE FPA FPA IMAGE TRUE MEGACAM_FPA:MOSAIC - PPIMAGE.OUTPUT.FPA2 OUTPUT {OUTPUT}.b2.fit {CHIP.NAME} {CHIP.NAME} NONE FPA FPA IMAGE TRUE MEGACAM_FPA:MOSAIC - - PPIMAGE.BIN1 OUTPUT {OUTPUT}.{CHIP.NAME}.b1.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE MEGACAM_CHIP:MOSAIC - PPIMAGE.BIN2 OUTPUT {OUTPUT}.{CHIP.NAME}.b2.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE MEGACAM_CHIP:MOSAIC - PPIMAGE.JPEG1 OUTPUT {OUTPUT}.b1.jpg NONE NONE NONE FPA FPA JPEG TRUE MEGACAM_FPA:MOSAIC - PPIMAGE.JPEG2 OUTPUT {OUTPUT}.b2.jpg NONE NONE NONE FPA FPA JPEG TRUE MEGACAM_FPA:MOSAIC - - PSPHOT.RESID OUTPUT {OUTPUT}.res.fits NONE {CELL.NAME} {CELL.NAME} FPA FPA IMAGE TRUE SIMPLE - PSPHOT.BACKGND OUTPUT {OUTPUT}.bck.fits NONE {CELL.NAME} {CELL.NAME} FPA FPA IMAGE TRUE SIMPLE - PSPHOT.BACKSUB OUTPUT {OUTPUT}.sub.fits NONE {CELL.NAME} {CELL.NAME} FPA FPA IMAGE TRUE SIMPLE - PSPHOT.BACKMDL OUTPUT {OUTPUT}.mdl.fits NONE {CELL.NAME} {CELL.NAME} FPA FPA IMAGE TRUE SIMPLE - - PSPHOT.OUTPUT.RAW OUTPUT {OUTPUT}.{CHIP.NAME} NONE NONE PHU CHIP CHIP RAW TRUE NONE - PSPHOT.OUTPUT.SX OUTPUT {OUTPUT}.sx NONE NONE PHU CHIP CHIP SX TRUE NONE - PSPHOT.OUTPUT.OBJ OUTPUT {OUTPUT}.obj NONE NONE PHU CHIP CHIP OBJ TRUE NONE - PSPHOT.OUTPUT.CMF OUTPUT {OUTPUT}.cmf NONE SMPDATA PHU CHIP CHIP CMF TRUE NONE - PSPHOT.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.cmp NONE NONE PHU CHIP CHIP CMP TRUE NONE - - PSASTRO.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.smp NONE NONE PHU CHIP CHIP CMP TRUE NONE -END Index: unk/ippconfig/megacam_alternate/format.config =================================================================== --- /trunk/ippconfig/megacam_alternate/format.config (revision 11590) +++ (revision ) @@ -1,64 +1,0 @@ -# Drop-dead simple camera with single chip with single cell - -# How to identify this type -RULE METADATA - RUNID STR 03BH11 - DETECTOR STR MegaCam - SIMPLE BOOL TRUE - NAXIS S32 2 -END - -# How to read this data -FILE METADATA - PHU STR FPA # The FITS file represents an entire FPA - EXTENSIONS STR NONE # There are no extensions - FPA.NAME STR OBJECT # A PHU keyword for unique identifier within the hierarchy level -END - -# What's in the FITS file? -CONTENTS STR Chip:Cell:amplifier - -# Specify the cell data -CELLS METADATA - amplifier METADATA - CELL.TRIMSEC.SOURCE STR VALUE - CELL.BIASSEC.SOURCE STR VALUE - # CELL.TRIMSEC STR [11:2100,1:4644] # col1 <= 0 -> decrement relative to NAXIS1 - CELL.TRIMSEC STR [17:1040,5:2300] # col1 <= 0 -> decrement relative to NAXIS1 - # CELL.BIASSEC STR [1:9,1:4644] # empty region - END -END - -# How to translate PS concepts into FITS headers -TRANSLATION METADATA - FPA.AIRMASS STR AIRMASS - FPA.FILTER STR FILTER - FPA.POSANGLE STR POSANG - FPA.RA STR OBJ-RA - FPA.DEC STR OBJ-DEC - CELL.EXPOSURE STR EXPTIME - CELL.DARKTIME STR DARKTIME - # CELL.TIME STR DATE-OBS UTC-OBS # Date and time - CELL.XBIN STR CCDSUM - CELL.YBIN STR CCDSUM -END - -# Default PS concepts that may be specified by value -DEFAULTS METADATA - FPA.RADECSYS STR ICRS - CELL.GAIN F32 4.0 - CELL.READNOISE F32 0.0 - CELL.SATURATION F32 65535 - CELL.BAD F32 -10 - CELL.READDIR S32 1 - CELL.TIMESYS STR UTC - CELL.XPARITY S32 1 - CELL.YPARITY S32 1 - CELL.X0 S32 0 - CELL.Y0 S32 0 -END - -FORMATS METADATA - FPA.RA STR HOURS - FPA.DEC STR DEGREES -END Index: unk/ippconfig/megacam_alternate/phase2.config =================================================================== --- /trunk/ippconfig/megacam_alternate/phase2.config (revision 11590) +++ (revision ) @@ -1,73 +1,0 @@ -### Phase 2 recipe configuration file - -# List of tasks to perform -MASK BOOL FALSE # Mask bad pixels -NONLIN BOOL FALSE # Non-linearity correction -OVERSCAN BOOL FALSE # Overscan subtraction -BIAS BOOL FALSE # Bias subtraction -DARK BOOL FALSE # Dark subtraction -FLAT BOOL FALSE # Flat-field normalisation -FRINGE BOOL FALSE # Fringe subtraction -SOURCE BOOL FALSE # Source identification and photometry -ASTROM BOOL FALSE # Astrometry -BIN1.FITS BOOL TRUE -BIN2.FITS BOOL TRUE -BIN1.JPEG BOOL FALSE -BIN2.JPEG BOOL FALSE - -# Non-linearity correction -NONLIN.SOURCE STR CHIP.NAME # How to determine the source -#@NONLIN.DATA F32 0.0 1.001 0.001 # A polynomial -NONLIN.DATA STR nonlin.dat # Filename for lookup table -#NONLIN.DATA METADATA # Source of non-linearity data -# ccd00 STR nonlin00.dat # A lookup table -# @ccd01 F32 0.0 1.001 0.001 # A polynomial -# @ccd02 F32 0.0 1.001 0.001 # A polynomial -# @ccd03 F32 1.2345 # A polynomial -# @ccd04 F32 0.0 1.001 0.001 # A polynomial -# @ccd05 F32 0.0 1.001 0.001 # A polynomial -# @ccd06 F32 0.0 1.001 0.001 # A polynomial -# @ccd07 F32 0.0 1.001 0.001 # A polynomial -# @ccd08 F32 0.0 1.001 0.001 # A polynomial -# @ccd09 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd11 F32 0.0 1.001 0.001 # A polynomial -# @ccd12 F32 0.0 1.001 0.001 # A polynomial -# @ccd13 F32 0.0 1.001 0.001 # A polynomial -# @ccd14 F32 0.0 1.001 0.001 # A polynomial -# @ccd15 F32 0.0 1.001 0.001 # A polynomial -# @ccd16 F32 0.0 1.001 0.001 # A polynomial -# @ccd17 F32 0.0 1.001 0.001 # A polynomial -# @ccd18 F32 0.0 1.001 0.001 # A polynomial -# @ccd19 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd21 F32 0.0 1.001 0.001 # A polynomial -# @ccd22 F32 0.0 1.001 0.001 # A polynomial -# @ccd23 F32 0.0 1.001 0.001 # A polynomial -# @ccd24 F32 0.0 1.001 0.001 # A polynomial -# @ccd25 F32 0.0 1.001 0.001 # A polynomial -# @ccd26 F32 0.0 1.001 0.001 # A polynomial -# @ccd27 F32 0.0 1.001 0.001 # A polynomial -# @ccd28 F32 0.0 1.001 0.001 # A polynomial -# @ccd29 F32 0.0 1.001 0.001 # A polynomial -# @ccd30 F32 0.0 1.001 0.001 # A polynomial -# @ccd31 F32 0.0 1.001 0.001 # A polynomial -# @ccd32 F32 0.0 1.001 0.001 # A polynomial -# @ccd33 F32 0.0 1.001 0.001 # A polynomial -# @ccd34 F32 0.0 1.001 0.001 # A polynomial -# @ccd35 F32 0.0 1.001 0.001 # A polynomial -# @ccd36 F32 0.0 1.001 0.001 # A polynomial -#END - -# Overscan subtraction -OVERSCAN.SINGLE BOOL FALSE # Reduce overscan to a single value? -#OVERSCAN.FIT STR SPLINE # NONE | POLYNOMIAL | SPLINE -OVERSCAN.FIT STR POLYNOMIAL # NONE | POLYNOMIAL | SPLINE -OVERSCAN.ORDER S32 5 # Order of polynomial fit -OVERSCAN.STAT STR MEAN # MEAN | MEDIAN - -# binned output image options -BIN1.XBIN S32 8 -BIN1.YBIN S32 8 -BIN2.XBIN S32 64 -BIN2.YBIN S32 64 Index: unk/ippconfig/megacam_alternate/psphot.config =================================================================== --- /trunk/ippconfig/megacam_alternate/psphot.config (revision 11590) +++ (revision ) @@ -1,93 +1,0 @@ - -#SAVE.BACKMDL BOOL TRUE -#SAVE.BACKGND BOOL TRUE -#SAVE.BACKSUB BOOL TRUE -#SAVE.RESID BOOL TRUE -#SAVE.PSF BOOL TRUE -#LOAD.PSF BOOL FALSE - -# image noise parameters -RDNOISE STR HD:RDNOISE # read-noise in electrons -GAIN STR HD:GAIN # electrons / DN -ZERO_POINT F32 25.000 # zero point used by DVO - -# un-comment this if a bias / background has been subtracted -BACKGROUND.LEVEL F32 100.0 # subtracted background level: - -# background model : -BACKGROUND.XBIN S32 128 -BACKGROUND.YBIN S32 128 - -# masking parameters -XMIN F32 2 # minimum valid x-coord -XMAX F32 -2 # maximum valid x-coord -YMIN F32 2 # minimum valid y-coord -YMAX F32 -2 # maximum valid y-coord -SATURATION F32 50000 # saturation level on this chip -MIN_VALID_PIXEL F32 -20 # saturation level on this chip - -# image statistics parameters -IMSTATS_NPIX S32 1000 # number of pixels to use for sky estimate boxes: - -# peak finding -PEAKS_SMOOTH_SIGMA F32 1.0 # smoothing kernel sigma in pixels -PEAKS_SMOOTH_NSIGMA F32 3.0 # smoothing kernel width in sigmas -PEAKS_NSIGMA_LIMIT F32 3.0 # peak significance threshold - -# basic object statistics -SKY_INNER_RADIUS F32 15 # square annulus for local sky measurement -SKY_OUTER_RADIUS F32 25 # square annulus for local sky measurement -PSF_MOMENTS_RADIUS F32 3 # calculate initial source moments with this radius -PSF_SN_LIM F32 100 # minimum S/N for stars used for PSF model -PSF_MAX_NSTARS S32 300 # limit number of stars used for PSF model - -# PSF model parameters : choose the PSF model -# list as many PSF_MODEL options as desired -# PSF_MODEL MULTI -PSF_MODEL STR PS_MODEL_QGAUSS -# PSF_MODEL STR PS_MODEL_GAUSS -# PSF_MODEL STR PS_MODEL_PGAUSS -# PSF_MODEL STR PS_MODEL_TGAUSS ## not well tested, not very successful - -MOMENTS_SCALE F32 0.1 -MOMENTS_SN_MIN F32 30.0 -MOMENTS_SX_MAX F32 3.0 -MOMENTS_SY_MAX F32 1.4 -MOMENTS_AR_MAX F32 1.5 # maximum axial ratio: 1 / AR < (sx / sy) < AR - -PSF_FIT_RADIUS F32 15.0 # fitting radius for test PSF model -PSF_REF_RADIUS F32 35.0 # aperture magnitudes are scaled via - # curve-of-growth to this radius -# PSF-like source model parameters -PSF_FIT_NSIGMA F32 1.0 # significance for pixel included in fit -PSF_FIT_PADDING F32 5.0 # extra annulus to use for fit -PSF_SHAPE_NSIGMA F32 3.0 # max significance for shape variation -PSF_MIN_SN F32 2.0 # reject objects below this significance -PSF_MAX_CHI F32 50.0 # reject objects worse that this - -# EXTended source model parameters -EXT_MODEL STR PS_MODEL_PGAUSS -EXT_MIN_SN F32 50.0 # fit galaxies above this S/N limit -EXT_FIT_NSIGMA F32 1 # significance for pixel included in fit -EXT_FIT_PADDING F32 10 # extra annulus to use for fit -EXT_MOMENTS_RADIUS F32 9 - -FITMODE STR BLEND -DEBLEND_PEAK_FRACTION F32 0.1 -DEBLEND_SKY_NSIGMA F32 10.0 - -# APTREND STR CONSTANT -APTREND STR ALL -# APTREND STR SKYSAT_XY_LIN -# APTREND STR SKYSAT -# APTREND STR SKYBIAS -FULL_FIT_SN_LIM F32 50.0 -AP_MIN_SN F32 50.0 - -# test options -# BREAK_POINT STR PEAKS -PEAKS_OUTPUT_FILE STR peaks.dat -MOMENTS_OUTPUT_FILE STR moments.dat -# ANALYSIS_REGION STR [1000:1600,2800:3400] -# POISSON_ERRORS BOOL TRUE -# SKY_BIAS F32 0.0 Index: unk/ippconfig/megacam_chipmosaic/camera.config =================================================================== --- /trunk/ippconfig/megacam_chipmosaic/camera.config (revision 11590) +++ (revision ) @@ -1,151 +1,0 @@ -# Camera configuration file for MegaCam (chip-mosaicked): describes the camera - -# File formats that we know about (these are relative to PATH) -FORMATS METADATA - MOSAIC STR megacam_chipmosaic/format_mosaic.config -END - - -# Description of camera --- all the chips and the cells that comprise them -FPA METADATA - ccd00 STR Cell - ccd01 STR Cell - ccd02 STR Cell - ccd03 STR Cell - ccd04 STR Cell - ccd05 STR Cell - ccd06 STR Cell - ccd07 STR Cell - ccd08 STR Cell - ccd09 STR Cell - ccd10 STR Cell - ccd11 STR Cell - ccd12 STR Cell - ccd13 STR Cell - ccd14 STR Cell - ccd15 STR Cell - ccd16 STR Cell - ccd17 STR Cell - ccd18 STR Cell - ccd19 STR Cell - ccd20 STR Cell - ccd21 STR Cell - ccd22 STR Cell - ccd23 STR Cell - ccd24 STR Cell - ccd25 STR Cell - ccd26 STR Cell - ccd27 STR Cell - ccd28 STR Cell - ccd29 STR Cell - ccd30 STR Cell - ccd31 STR Cell - ccd32 STR Cell - ccd33 STR Cell - ccd34 STR Cell - ccd35 STR Cell -END - -# move this elsewhere? we need a lookup table to go from filter ID to abstract name -FILTER.ID METADATA - u.MP9301 STR u - g.MP9401 STR g - r.MP9601 STR r - i.MP9701 STR i - z.MP9801 STR z - Zp STR z - Zprime STR z - Ha.MP7605 STR Ha - Halpha STR Ha - Haalpha.on STR Ha - HaOFF.MP7604 STR HaOff - - CN.MP780 STR CN - cn.MP7803 STR CN - CN.MP7803 STR CN - - TiO.MP77 STR TiO - tio.MP7701 STR TiO - TiO.MP7701 STR TiO - NB920 STR NB920 - - B2F STR B2F - Bj STR Bj - Vj STR Vj - Rj STR Rj - Ij STR Ij - Hb STR Hb - HbOff STR HbOff -END - -# Recipe options -RECIPES METADATA - # Recipes for ppMerge - PPMERGE STR ppMerge_template.config # ppMerge recipe - PPMERGE_BIAS STR megacam/ppMerge_bias.config - PPMERGE_DARK STR megacam/ppMerge_dark.config - PPMERGE_FLAT STR megacam/ppMerge_flat.config - PPMERGE_FRINGE STR megacam/ppMerge_fringe.config - - # Other recipes - PSPHOT STR megacam/psphot.config # psphot details - PSASTRO STR megacam/psastro.config # psastro details - PPSTATS STR megacam/ppStats.config # ppStats recipe -END - -FILERULES METADATA - ### Redirections - PSASTRO.INPUT STR PSASTRO.INPUT.CMP - PSASTRO.OUTPUT STR PSASTRO.OUTPUT.CMP - PSPHOT.OUTPUT STR PSPHOT.OUTPUT.CMP - - ### input file definitions - TYPE INPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA DATA.LEVEL FILE.TYPE - PPIMAGE.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - ### use these entries to get the detrend images from specific files - PPIMAGE.MASK INPUT mask.mef.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.BIAS INPUT bias_{CHIP.NAME}_1_0.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.DARK INPUT dark_{CHIP.NAME}_2_0.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.FLAT INPUT flat_{CHIP.NAME}_3_0.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - - ### use these entries to get the detrend images from the database - #PPIMAGE.MASK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.BIAS INPUT @DETDB fpa fpa NONE CHIP IMAGE - #PPIMAGE.DARK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.FLAT INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - - PSPHOT.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - PSASTRO.INPUT.CMP INPUT @FILES NONE NONE PHU CHIP CMP - PSASTRO.INPUT.CMF INPUT @FILES NONE SMPDATA PHU CHIP CMF - - ### output file definitions - TYPE OUTPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA FILE.LEVEL DATA.LEVEL FILE.TYPE FILE.SAVE FILE.FORMAT - PPIMAGE.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE NONE - PPIMAGE.OUTPUT.MASK OUTPUT {OUTPUT}.{CHIP.NAME}.mask.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP MASK FALSE NONE - PPIMAGE.OUTPUT.WEIGHT OUTPUT {OUTPUT}.{CHIP.NAME}.wt.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP WEIGHT FALSE NONE - PPIMAGE.BIN1 OUTPUT {OUTPUT}.{CHIP.NAME}.b1.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE MOSAIC - PPIMAGE.BIN2 OUTPUT {OUTPUT}.{CHIP.NAME}.b2.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE MOSAIC - - PPIMAGE.OUTPUT.CHIP OUTPUT {OUTPUT}.{CHIP.NAME}.chip.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE MOSAIC - PPIMAGE.OUTPUT.FPA1 OUTPUT {OUTPUT}.b1.fits NONE NONE NONE FPA FPA IMAGE TRUE MEGACAM_FPA:MOSAIC - PPIMAGE.OUTPUT.FPA2 OUTPUT {OUTPUT}.b2.fits NONE NONE NONE FPA FPA IMAGE TRUE MEGACAM_FPA:MOSAIC - - PPIMAGE.JPEG1 OUTPUT {OUTPUT}.b1.jpg NONE NONE NONE FPA FPA JPEG TRUE MEGACAM_FPA:MOSAIC - PPIMAGE.JPEG2 OUTPUT {OUTPUT}.b2.jpg NONE NONE NONE FPA FPA JPEG TRUE MEGACAM_FPA:MOSAIC - - PSPHOT.RESID OUTPUT {OUTPUT}.res.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKGND OUTPUT {OUTPUT}.bck.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKSUB OUTPUT {OUTPUT}.sub.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKMDL OUTPUT {OUTPUT}.mdl.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - - PSPHOT.OUTPUT.RAW OUTPUT {OUTPUT}.{CHIP.NAME} NONE NONE PHU CHIP CHIP RAW TRUE NONE - PSPHOT.OUTPUT.SX OUTPUT {OUTPUT}.sx NONE NONE PHU CHIP CHIP SX TRUE NONE - PSPHOT.OUTPUT.OBJ OUTPUT {OUTPUT}.obj NONE NONE PHU CHIP CHIP OBJ TRUE NONE - PSPHOT.OUTPUT.CMF OUTPUT {OUTPUT}.cmf NONE SMPDATA PHU CHIP CHIP CMF TRUE NONE - PSPHOT.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.cmp NONE NONE PHU CHIP CHIP CMP TRUE NONE - - PSASTRO.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.smp NONE NONE PHU CHIP CHIP CMP TRUE NONE - -END Index: unk/ippconfig/megacam_chipmosaic/format_mosaic.config =================================================================== --- /trunk/ippconfig/megacam_chipmosaic/format_mosaic.config (revision 11590) +++ (revision ) @@ -1,204 +1,0 @@ -# The spliced MecaCam data is stored in single extensions for each chip - -# How to recognise this type -RULE METADATA - TELESCOP STR CFHT 3.6m - DETECTOR STR MegaCam Mosaicked:Chip -END - -FILE METADATA - # How to read this data - PHU STR CHIP # The FITS file represents an entire FPA - EXTENSIONS STR NONE # The extensions represent chips - FPA.NAME STR EXPNUM # A PHU keyword for unique identifier - CHIP.NAME STR EXTNAME # A PHU keyword for unique identifier - CONTENT STR {CHIP.NAME} # A string to index the CONTENTS menu; required because EXT=NONE -END - -# What's in the FITS file? -CONTENTS METADATA - # Extension name, chip name:component cell - ccd00 STR ccd00:Cell:mosaic - ccd01 STR ccd01:Cell:mosaic - ccd02 STR ccd02:Cell:mosaic - ccd03 STR ccd03:Cell:mosaic - ccd04 STR ccd04:Cell:mosaic - ccd05 STR ccd05:Cell:mosaic - ccd06 STR ccd06:Cell:mosaic - ccd07 STR ccd07:Cell:mosaic - ccd08 STR ccd08:Cell:mosaic - ccd09 STR ccd09:Cell:mosaic - ccd10 STR ccd10:Cell:mosaic - ccd11 STR ccd11:Cell:mosaic - ccd12 STR ccd12:Cell:mosaic - ccd13 STR ccd13:Cell:mosaic - ccd14 STR ccd14:Cell:mosaic - ccd15 STR ccd15:Cell:mosaic - ccd16 STR ccd16:Cell:mosaic - ccd17 STR ccd17:Cell:mosaic - ccd18 STR ccd18:Cell:mosaic - ccd19 STR ccd19:Cell:mosaic - ccd20 STR ccd20:Cell:mosaic - ccd21 STR ccd21:Cell:mosaic - ccd22 STR ccd22:Cell:mosaic - ccd23 STR ccd23:Cell:mosaic - ccd24 STR ccd24:Cell:mosaic - ccd25 STR ccd25:Cell:mosaic - ccd26 STR ccd26:Cell:mosaic - ccd27 STR ccd27:Cell:mosaic - ccd28 STR ccd28:Cell:mosaic - ccd29 STR ccd29:Cell:mosaic - ccd30 STR ccd30:Cell:mosaic - ccd31 STR ccd31:Cell:mosaic - ccd32 STR ccd32:Cell:mosaic - ccd33 STR ccd33:Cell:mosaic - ccd34 STR ccd34:Cell:mosaic - ccd35 STR ccd35:Cell:mosaic -END - -# Specify the cells -CELLS METADATA - mosaic METADATA - CELL.BIASSEC.SOURCE STR HEADER - CELL.TRIMSEC.SOURCE STR HEADER - CELL.BIASSEC STR BIASSEC - CELL.TRIMSEC STR TRIMSEC - END -END - -# How to translate PS concepts into FITS headers -TRANSLATION METADATA - FPA.NAME STR EXPNUM - FPA.AIRMASS STR AIRMASS - FPA.FILTER STR FILTER - FPA.POSANGLE STR ROTANGLE - FPA.RA STR RA - FPA.DEC STR DEC - FPA.RADECSYS STR RADECSYS - FPA.OBSTYPE STR OBSTYPE - FPA.OBJECT STR CMMTOBS - FPA.ALT STR TELALT - FPA.AZ STR TELAZ - CHIP.TEMP STR DETTEM - CELL.EXPOSURE STR EXPTIME - CELL.DARKTIME STR DARKTIME - CELL.GAIN STR GAIN - CELL.READNOISE STR RDNOISE - CELL.SATURATION STR SATURATE - CELL.TIME STR MJD-OBS - CELL.XBIN STR CCDBIN1 - CELL.YBIN STR CCDBIN2 -END - -# Default PS concepts that may be specified by value -DEFAULTS METADATA - CELL.READDIR S32 1 # Cell is read in x direction - CELL.BAD S32 0 - CELL.TIMESYS STR UTC - CELL.XPARITY S32 1 - CELL.YPARITY S32 1 - CELL.X0 S32 0 - CELL.Y0 S32 0 - CHIP.XPARITY S32 1 - CHIP.YPARITY S32 1 - CHIP.X0.DEPEND STR CHIP.NAME - CHIP.X0 METADATA - ccd00 S32 0 - ccd01 S32 2048 - ccd02 S32 4096 - ccd03 S32 6144 - ccd04 S32 8192 - ccd05 S32 10240 - ccd06 S32 12288 - ccd07 S32 14336 - ccd08 S32 16384 - ccd09 S32 0 - ccd10 S32 2048 - ccd11 S32 4096 - ccd12 S32 6144 - ccd13 S32 8192 - ccd14 S32 10240 - ccd15 S32 12288 - ccd16 S32 14336 - ccd17 S32 16384 - ccd18 S32 0 - ccd19 S32 2048 - ccd20 S32 4096 - ccd21 S32 6144 - ccd22 S32 8192 - ccd23 S32 10240 - ccd24 S32 12288 - ccd25 S32 14336 - ccd26 S32 16384 - ccd27 S32 0 - ccd28 S32 2048 - ccd29 S32 4096 - ccd30 S32 6144 - ccd31 S32 8192 - ccd32 S32 10240 - ccd33 S32 12288 - ccd34 S32 14336 - ccd35 S32 16384 - END - CHIP.Y0.DEPEND STR CHIP.NAME - CHIP.Y0 METADATA - ccd00 S32 18447 - ccd01 S32 18447 - ccd02 S32 18447 - ccd03 S32 18447 - ccd04 S32 18447 - ccd05 S32 18447 - ccd06 S32 18447 - ccd07 S32 18447 - ccd08 S32 18447 - ccd09 S32 13835 - ccd10 S32 13835 - ccd11 S32 13835 - ccd12 S32 13835 - ccd13 S32 13835 - ccd14 S32 13835 - ccd15 S32 13835 - ccd16 S32 13835 - ccd17 S32 13835 - ccd18 S32 4612 - ccd19 S32 4612 - ccd20 S32 4612 - ccd21 S32 4612 - ccd22 S32 4612 - ccd23 S32 4612 - ccd24 S32 4612 - ccd25 S32 4612 - ccd26 S32 4612 - ccd27 S32 0 - ccd28 S32 0 - ccd29 S32 0 - ccd30 S32 0 - ccd31 S32 0 - ccd32 S32 0 - ccd33 S32 0 - ccd34 S32 0 - ccd35 S32 0 - END -END - - -# How to translation PS concepts into database lookups -DATABASE METADATA - TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS -# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME -# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME - -# A database entry refers to a particular column (COLUMN) in a -# particular table (TABLE), given certain PS concepts (GIVENPS) that -# match certain database columns (GIVENDBCOL). -END - - -# Where there might be some ambiguity, specify the format -FORMATS METADATA - FPA.RA STR HOURS - FPA.DEC STR DEGREES - CELL.TIME STR MJD -END - - Index: unk/ippconfig/megacam_detrended/camera.config =================================================================== --- /trunk/ippconfig/megacam_detrended/camera.config (revision 11590) +++ (revision ) @@ -1,145 +1,0 @@ -# Camera configuration file for MegaCam: describes the camera - -# File formats that we know about -FORMATS METADATA - SPLICED STR megacam_detrended/format_spliced.config - SPLIT STR megacam_detrended/format_split.config -END - - -# Description of camera --- all the chips and the cells that comprise them -FPA METADATA - ccd00 STR ccd - ccd01 STR ccd - ccd02 STR ccd - ccd03 STR ccd - ccd04 STR ccd - ccd05 STR ccd - ccd06 STR ccd - ccd07 STR ccd - ccd08 STR ccd - ccd09 STR ccd - ccd10 STR ccd - ccd11 STR ccd - ccd12 STR ccd - ccd13 STR ccd - ccd14 STR ccd - ccd15 STR ccd - ccd16 STR ccd - ccd17 STR ccd - ccd18 STR ccd - ccd19 STR ccd - ccd20 STR ccd - ccd21 STR ccd - ccd22 STR ccd - ccd23 STR ccd - ccd24 STR ccd - ccd25 STR ccd - ccd26 STR ccd - ccd27 STR ccd - ccd28 STR ccd - ccd29 STR ccd - ccd30 STR ccd - ccd31 STR ccd - ccd32 STR ccd - ccd33 STR ccd - ccd34 STR ccd - ccd35 STR ccd -END - -# move this elsewhere? we need a lookup table to go from filter ID to abstract name -FILTER.ID METADATA - u.MP9301 STR u - g.MP9401 STR g - r.MP9601 STR r - i.MP9701 STR i - z.MP9801 STR z - Zp STR z - Zprime STR z - Ha.MP7605 STR Ha - Halpha STR Ha - Haalpha.on STR Ha - HaOFF.MP7604 STR HaOff - - CN.MP780 STR CN - cn.MP7803 STR CN - CN.MP7803 STR CN - - TiO.MP77 STR TiO - tio.MP7701 STR TiO - TiO.MP7701 STR TiO - NB920 STR NB920 - - B2F STR B2F - Bj STR Bj - Vj STR Vj - Rj STR Rj - Ij STR Ij - Hb STR Hb - HbOff STR HbOff -END - -# Recipe options -RECIPES METADATA - PHASE2 STR megacam_detrended/phase2.config # Phase 2 recipe details - PSPHOT STR megacam_detrended/psphot.config # psphot details -END - -FILERULES METADATA - # filerule aliases: select the version you prefer for the given type - PSPHOT.OUTPUT STR PSPHOT.SPL.CMF - # PSPHOT.OUTPUT STR PSPHOT.CMP - - PSASTRO.INPUT STR PSASTRO.SPL.CMF - PSASTRO.OUTPUT STR PSASTRO.MEF.CMF - - ### input file definitions - TYPE INPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA DATA.LEVEL FILE.TYPE - PPIMAGE.INPUT INPUT none.fits {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - PSPHOT.INPUT INPUT none.fits {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - PSPHOT.MASK INPUT none.fits NONE NONE NONE FPA MASK - PSPHOT.WEIGHT INPUT none.fits NONE NONE NONE FPA WEIGHT - PSPHOT.PSF INPUT none.fits NONE NONE NONE FPA PSF - PSPHOT.SRC INPUT none.fits NONE NONE NONE CHIP CMF - PSASTRO.INPUT.CMP INPUT none.fits NONE NONE NONE CHIP CMP - - PSASTRO.INPUT.CMF INPUT @FILES NONE SMPDATA PHU CHIP CMF - - ### output file definitions - TYPE OUTPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA FILE.LEVEL DATA.LEVEL FILE.TYPE FILE.SAVE FILE.FORMAT - PPIMAGE.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fit NONE NONE NONE CHIP CHIP IMAGE TRUE SPLIT - PPIMAGE.OUTPUT.CHIP OUTPUT {OUTPUT}.{CHIP.NAME}.ch.fit NONE NONE NONE CHIP CHIP IMAGE TRUE SPLIT - PPIMAGE.OUTPUT.FPA1 OUTPUT {OUTPUT}.b1.fit NONE NONE NONE FPA FPA IMAGE TRUE SPLIT - PPIMAGE.OUTPUT.FPA2 OUTPUT {OUTPUT}.b2.fit NONE NONE NONE FPA FPA IMAGE TRUE SPLIT - - PPIMAGE.BIN1 OUTPUT {OUTPUT}.{CHIP.NAME}.b1.fit NONE NONE NONE CHIP CHIP IMAGE TRUE SPLIT - PPIMAGE.BIN2 OUTPUT {OUTPUT}.{CHIP.NAME}.b2.fit NONE NONE NONE CHIP CHIP IMAGE TRUE SPLIT - PPIMAGE.JPEG1 OUTPUT {OUTPUT}.{CHIP.NAME}.b1.jpg NONE NONE NONE FPA CHIP JPEG TRUE SPLIT - PPIMAGE.JPEG2 OUTPUT {OUTPUT}.{CHIP.NAME}.b2.jpg NONE NONE NONE FPA CHIP JPEG TRUE SPLIT - - PSPHOT.RESID OUTPUT {OUTPUT}.res.fits {CHIP.NAME} {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICED - PSPHOT.BACKGND OUTPUT {OUTPUT}.bck.fits {CHIP.NAME} {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICED - PSPHOT.BACKSUB OUTPUT {OUTPUT}.sub.fits {CHIP.NAME} {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICED - PSPHOT.BACKMDL OUTPUT {OUTPUT}.mdl.fits {CHIP.NAME} {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICED - - # various options for saving the psphot output in different formats - PSPHOT.RAW OUTPUT {OUTPUT}.{CHIP.NAME} NONE NONE PHU CHIP CHIP RAW TRUE NONE - PSPHOT.SX OUTPUT {OUTPUT}.sx NONE NONE PHU CHIP CHIP SX TRUE NONE - PSPHOT.OBJ OUTPUT {OUTPUT}.obj NONE NONE PHU CHIP CHIP OBJ TRUE NONE - PSPHOT.CMP OUTPUT {OUTPUT}{CHIP.N}.cmp NONE NONE PHU CHIP CHIP CMP TRUE NONE - PSPHOT.SPL.CMF OUTPUT {OUTPUT}{CHIP.N}.cmf NONE SMPDATA {CHIP.NAME} CHIP CHIP CMF TRUE NONE - PSPHOT.MEF.CMF OUTPUT {OUTPUT}.cmf NONE {CHIP.NAME}.cmf {CHIP.NAME} FPA CHIP CMF TRUE NONE - - PSASTRO.CMP OUTPUT {OUTPUT}{CHIP.N}.xmp NONE NONE PHU CHIP CHIP CMP TRUE NONE - PSASTRO.SPL.CMF OUTPUT {OUTPUT}{CHIP.N}.xmf NONE SMPDATA PHU CHIP CHIP CMF TRUE SPLIT - PSASTRO.MEF.CMF OUTPUT {OUTPUT}.xmf NONE {CHIP.NAME}.cmf {CHIP.NAME} FPA CHIP CMF TRUE SPLICED -END - -# known uses of the filename.xtra, extname.rule, and extname.xtra: -# extname.rule: used to construct output EXTNAME keys (CMF DATA) -# extname.xtra: used to construct output EXTNAME keys (CMF HEAD) - -# extname.rule: used to carry classID to DetDB -# filename.xtra: used to carry detID to DetDB (internal) - -# filename.xtra: used to carry arglist name (internal) Index: unk/ippconfig/megacam_detrended/format_spliced.config =================================================================== --- /trunk/ippconfig/megacam_detrended/format_spliced.config (revision 11590) +++ (revision ) @@ -1,213 +1,0 @@ -# The spliced MegaCam data is stored in single extensions for each chip -# this file is for DETREND Megacam images - -# How to recognise this type -RULE METADATA - TELESCOP STR CFHT 3.6m - DETECTOR STR MegaCam - IMRED_OP STR MASK_BP + OVERSCAN + BIAS + FLAT-FIELD - EXTEND BOOL T - NEXTEND S32 36 -END - -# How to read this data -FILE METADATA - PHU STR FPA # The FITS file represents an entire FPA - EXTENSIONS STR CHIP # The extensions represent chips - FPA.NAME STR EXPNUM # A PHU keyword for unique identifier - CHIP.NAME STR EXTNAME # An extension keyword for unique identifie -END - -# What's in the FITS file? -CONTENTS METADATA - # Extension name, chip name:component cell - ccd00 STR ccd00:ccd:ccd - ccd01 STR ccd01:ccd:ccd - ccd02 STR ccd02:ccd:ccd - ccd03 STR ccd03:ccd:ccd - ccd04 STR ccd04:ccd:ccd - ccd05 STR ccd05:ccd:ccd - ccd06 STR ccd06:ccd:ccd - ccd07 STR ccd07:ccd:ccd - ccd08 STR ccd08:ccd:ccd - ccd09 STR ccd09:ccd:ccd - ccd10 STR ccd10:ccd:ccd - ccd11 STR ccd11:ccd:ccd - ccd12 STR ccd12:ccd:ccd - ccd13 STR ccd13:ccd:ccd - ccd14 STR ccd14:ccd:ccd - ccd15 STR ccd15:ccd:ccd - ccd16 STR ccd16:ccd:ccd - ccd17 STR ccd17:ccd:ccd - ccd18 STR ccd18:ccd:ccd - ccd19 STR ccd19:ccd:ccd - ccd20 STR ccd20:ccd:ccd - ccd21 STR ccd21:ccd:ccd - ccd22 STR ccd22:ccd:ccd - ccd23 STR ccd23:ccd:ccd - ccd24 STR ccd24:ccd:ccd - ccd25 STR ccd25:ccd:ccd - ccd26 STR ccd26:ccd:ccd - ccd27 STR ccd27:ccd:ccd - ccd28 STR ccd28:ccd:ccd - ccd29 STR ccd29:ccd:ccd - ccd30 STR ccd30:ccd:ccd - ccd31 STR ccd31:ccd:ccd - ccd32 STR ccd32:ccd:ccd - ccd33 STR ccd33:ccd:ccd - ccd34 STR ccd34:ccd:ccd - ccd35 STR ccd35:ccd:ccd -END - -# Specify the cells -CELLS METADATA - ccd METADATA - CELL.NAME STR LeftSide - CELL.BIASSEC.SOURCE STR VALUE - CELL.TRIMSEC.SOURCE STR HEADER - CELL.BIASSEC STR [1:1,1:1] - CELL.TRIMSEC STR DATASEC - END -END - -# How to translate PS concepts into FITS headers -TRANSLATION METADATA - FPA.NAME STR EXPNUM - FPA.AIRMASS STR AIRMASS - FPA.FILTER STR FILTER - FPA.POSANGLE STR ROTANGLE - FPA.RA STR RA - FPA.DEC STR DEC - FPA.RADECSYS STR RADECSYS - CELL.EXPOSURE STR EXPTIME - CELL.DARKTIME STR DARKTIME - CELL.GAIN STR GAIN - CELL.READNOISE STR RDNOISE - CELL.SATURATION STR SATURATE - CELL.TIME STR MJD-OBS - CELL.XBIN STR CCDBIN1 - CELL.YBIN STR CCDBIN2 -END - -# Default PS concepts that may be specified by value -DEFAULTS METADATA - CELL.READDIR S32 1 # Cell is read in x direction - CELL.BAD S32 0 - CELL.TIMESYS STR UTC - CELL.XPARITY S32 1 - CELL.YPARITY S32 1 - CELL.X0 S32 0 - CELL.Y0 S32 0 -END - - -# How to translation PS concepts into database lookups -DATABASE METADATA - TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS -# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME -# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME - -# A database entry refers to a particular column (COLUMN) in a -# particular table (TABLE), given certain PS concepts (GIVENPS) that -# match certain database columns (GIVENDBCOL). -END - - -# Where there might be some ambiguity, specify the format -FORMATS METADATA - FPA.RA STR HOURS - FPA.DEC STR DEGREES - CELL.TIME STR MJD -END - -# Recipe options -RECIPES METADATA - PHASE2 STR phase2.config # Phase 2 recipe details -END - - -# How to get the supplementary stuff: mask and weight -SUPPLEMENTARY METADATA - MASK.SOURCE STR FILE # Source type for mask: EXT | FILE - MASK.NAME STR %a_mask.fits # Name for mask extension or filename - WEIGHT.SOURCE STR FILE # Source type for weight: EXT | FILE - WEIGHT.NAME STR %a_weight.fits # Name for weight extension or filename -END - -FILERULES METADATA - PSPHOT.INPUT METADATA - FILENAME.RULE STR @FPAIO - FILENAME.XTRA STR {CHIP.NAME} - EXTNAME.RULE STR {CELL.NAME} - EXTNAME.XTRA STR NONE - FILE.DEPTH STR FPA - DATA.DEPTH STR CHIP - FILE.TYPE STR IMAGE - FILE.MODE STR READ - END - - # an indirect rule allows multiple, related output definitions - PSPHOT.OUTPUT STR PSPHOT.OUTPUT.CMF - - PSPHOT.RESID METADATA - FILENAME.RULE STR {OUTPUT}.fits - FILENAME.XTRA STR NONE - EXTNAME.RULE STR {CELL.NAME} - EXTNAME.XTRA STR {CELL.NAME} - FILE.DEPTH STR FPA - DATA.DEPTH STR CHIP - FILE.TYPE STR IMAGE - FILE.MODE STR WRITE - END - - PSPHOT.OUTPUT.RAW METADATA - FILENAME.RULE STR {OUTPUT}.{CHIP.NAME} - FILENAME.XTRA STR NONE - EXTNAME.RULE STR NONE - EXTNAME.XTRA STR NONE - FILE.DEPTH STR CHIP - DATA.DEPTH STR CHIP - FILE.TYPE STR RAW - FILE.MODE STR WRITE - END - PSPHOT.OUTPUT.OBJ METADATA - FILENAME.RULE STR {OUTPUT}.{CHIP.NAME}.obj - FILENAME.XTRA STR NONE - EXTNAME.RULE STR NONE - EXTNAME.XTRA STR NONE - FILE.DEPTH STR CHIP - DATA.DEPTH STR CHIP - FILE.TYPE STR OBJ - FILE.MODE STR WRITE - END - PSPHOT.OUTPUT.SX METADATA - FILENAME.RULE STR {OUTPUT}.{CHIP.NAME}.sx - FILENAME.XTRA STR NONE - EXTNAME.RULE STR NONE - EXTNAME.XTRA STR NONE - FILE.DEPTH STR CHIP - DATA.DEPTH STR CHIP - FILE.TYPE STR SX - FILE.MODE STR WRITE - END - PSPHOT.OUTPUT.CMP METADATA - FILENAME.RULE STR {OUTPUT}.{CHIP.NAME}.cmp - FILENAME.XTRA STR NONE - EXTNAME.RULE STR NONE - EXTNAME.XTRA STR PHU - FILE.DEPTH STR CHIP - DATA.DEPTH STR CHIP - FILE.TYPE STR CMP - FILE.MODE STR WRITE - END - PSPHOT.OUTPUT.CMF METADATA - FILENAME.RULE STR {OUTPUT}.cmf - FILENAME.XTRA STR NONE - EXTNAME.RULE STR {CHIP.NAME}.data - EXTNAME.XTRA STR {CHIP.NAME}.head - FILE.DEPTH STR FPA - DATA.DEPTH STR CHIP - FILE.TYPE STR CMF - FILE.MODE STR WRITE - END -END Index: unk/ippconfig/megacam_detrended/format_split.config =================================================================== --- /trunk/ippconfig/megacam_detrended/format_split.config (revision 11590) +++ (revision ) @@ -1,121 +1,0 @@ -# The split MegaCam data is stored in single file for each chip -# this file is for DETREND Megacam images - -# How to recognise this type -RULE METADATA - TELESCOP STR CFHT 3.6m - DETECTOR STR MegaCam - IMRED_OP STR MASK_BP + OVERSCAN + BIAS + FLAT-FIELD -END - -# How to read this data -FILE METADATA - PHU STR CHIP # The FITS file represents a chip - EXTENSIONS STR NONE # There are no FITS extensions in this file - FPA.NAME STR EXPNUM # A PHU keyword for unique identifier within the hierarchy level - CHIP.NAME STR EXTNAME # An extension keyword for unique identifier - CONTENT STR {CHIP.NAME} # A string to index the CONTENTS menu; required because EXT=NONE -END - -# What's in the FITS file? -CONTENTS METADATA - # Chip name, components - ccd00 STR ccd:cell - ccd01 STR ccd:cell - ccd02 STR ccd:cell - ccd03 STR ccd:cell - ccd04 STR ccd:cell - ccd05 STR ccd:cell - ccd06 STR ccd:cell - ccd07 STR ccd:cell - ccd08 STR ccd:cell - ccd09 STR ccd:cell - ccd10 STR ccd:cell - ccd11 STR ccd:cell - ccd12 STR ccd:cell - ccd13 STR ccd:cell - ccd14 STR ccd:cell - ccd15 STR ccd:cell - ccd16 STR ccd:cell - ccd17 STR ccd:cell - ccd18 STR ccd:cell - ccd19 STR ccd:cell - ccd20 STR ccd:cell - ccd21 STR ccd:cell - ccd22 STR ccd:cell - ccd23 STR ccd:cell - ccd24 STR ccd:cell - ccd25 STR ccd:cell - ccd26 STR ccd:cell - ccd27 STR ccd:cell - ccd28 STR ccd:cell - ccd29 STR ccd:cell - ccd30 STR ccd:cell - ccd31 STR ccd:cell - ccd32 STR ccd:cell - ccd33 STR ccd:cell - ccd34 STR ccd:cell - ccd35 STR ccd:cell -END - -# Specify the cells -CELLS METADATA - cell METADATA - CELL.NAME STR LeftSide - CELL.BIASSEC.SOURCE STR VALUE - CELL.TRIMSEC.SOURCE STR HEADER - CELL.BIASSEC STR [1:1,1:1] - CELL.TRIMSEC STR DATASEC - END -END - -# How to translate PS concepts into FITS headers -TRANSLATION METADATA - FPA.NAME STR EXPNUM - FPA.AIRMASS STR AIRMASS - FPA.FILTER STR FILTER - FPA.POSANGLE STR ROTANGLE - FPA.RA STR RA - FPA.DEC STR DEC - FPA.RADECSYS STR RADECSYS - CELL.EXPOSURE STR EXPTIME - CELL.DARKTIME STR DARKTIME - CELL.GAIN STR GAIN - CELL.READNOISE STR RDNOISE -# CELL.SATURATION STR SATURATE - CELL.TIME STR MJD-OBS - CELL.XBIN STR CCDBIN1 - CELL.YBIN STR CCDBIN2 -END - -# Default PS concepts that may be specified by value -DEFAULTS METADATA - CELL.READDIR S32 1 # Cell is read in x direction - CELL.BAD S32 1 - CELL.TIMESYS STR UTC - CELL.XPARITY S32 1 - CELL.YPARITY S32 1 - CELL.X0 S32 0 - CELL.Y0 S32 0 - CELL.SATURATION S32 50000 -END - - -# How to translation PS concepts into database lookups -DATABASE METADATA - TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS -# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME -# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME - -# A database entry refers to a particular column (COLUMN) in a -# particular table (TABLE), given certain PS concepts (GIVENPS) that -# match certain database columns (GIVENDBCOL). -END - - -# Where there might be some ambiguity, specify the format -FORMATS METADATA - FPA.RA STR HOURS - FPA.DEC STR DEGREES - CELL.TIME STR MJD -END Index: unk/ippconfig/megacam_detrended/phase2.config =================================================================== --- /trunk/ippconfig/megacam_detrended/phase2.config (revision 11590) +++ (revision ) @@ -1,73 +1,0 @@ -### Phase 2 recipe configuration file - -# List of tasks to perform -MASK BOOL FALSE # Mask bad pixels -NONLIN BOOL FALSE # Non-linearity correction -OVERSCAN BOOL FALSE # Overscan subtraction -BIAS BOOL FALSE # Bias subtraction -DARK BOOL FALSE # Dark subtraction -FLAT BOOL FALSE # Flat-field normalisation -FRINGE BOOL FALSE # Fringe subtraction -SOURCE BOOL FALSE # Source identification and photometry -ASTROM BOOL FALSE # Astrometry -BIN1.FITS BOOL TRUE -BIN2.FITS BOOL TRUE -BIN1.JPEG BOOL FALSE -BIN2.JPEG BOOL FALSE - -# Non-linearity correction -NONLIN.SOURCE STR CHIP.NAME # How to determine the source -#@NONLIN.DATA F32 0.0 1.001 0.001 # A polynomial -NONLIN.DATA STR nonlin.dat # Filename for lookup table -#NONLIN.DATA METADATA # Source of non-linearity data -# ccd00 STR nonlin00.dat # A lookup table -# @ccd01 F32 0.0 1.001 0.001 # A polynomial -# @ccd02 F32 0.0 1.001 0.001 # A polynomial -# @ccd03 F32 1.2345 # A polynomial -# @ccd04 F32 0.0 1.001 0.001 # A polynomial -# @ccd05 F32 0.0 1.001 0.001 # A polynomial -# @ccd06 F32 0.0 1.001 0.001 # A polynomial -# @ccd07 F32 0.0 1.001 0.001 # A polynomial -# @ccd08 F32 0.0 1.001 0.001 # A polynomial -# @ccd09 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd11 F32 0.0 1.001 0.001 # A polynomial -# @ccd12 F32 0.0 1.001 0.001 # A polynomial -# @ccd13 F32 0.0 1.001 0.001 # A polynomial -# @ccd14 F32 0.0 1.001 0.001 # A polynomial -# @ccd15 F32 0.0 1.001 0.001 # A polynomial -# @ccd16 F32 0.0 1.001 0.001 # A polynomial -# @ccd17 F32 0.0 1.001 0.001 # A polynomial -# @ccd18 F32 0.0 1.001 0.001 # A polynomial -# @ccd19 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd21 F32 0.0 1.001 0.001 # A polynomial -# @ccd22 F32 0.0 1.001 0.001 # A polynomial -# @ccd23 F32 0.0 1.001 0.001 # A polynomial -# @ccd24 F32 0.0 1.001 0.001 # A polynomial -# @ccd25 F32 0.0 1.001 0.001 # A polynomial -# @ccd26 F32 0.0 1.001 0.001 # A polynomial -# @ccd27 F32 0.0 1.001 0.001 # A polynomial -# @ccd28 F32 0.0 1.001 0.001 # A polynomial -# @ccd29 F32 0.0 1.001 0.001 # A polynomial -# @ccd30 F32 0.0 1.001 0.001 # A polynomial -# @ccd31 F32 0.0 1.001 0.001 # A polynomial -# @ccd32 F32 0.0 1.001 0.001 # A polynomial -# @ccd33 F32 0.0 1.001 0.001 # A polynomial -# @ccd34 F32 0.0 1.001 0.001 # A polynomial -# @ccd35 F32 0.0 1.001 0.001 # A polynomial -# @ccd36 F32 0.0 1.001 0.001 # A polynomial -#END - -# Overscan subtraction -OVERSCAN.SINGLE BOOL FALSE # Reduce overscan to a single value? -#OVERSCAN.FIT STR SPLINE # NONE | POLYNOMIAL | SPLINE -OVERSCAN.FIT STR POLYNOMIAL # NONE | POLYNOMIAL | SPLINE -OVERSCAN.ORDER S32 5 # Order of polynomial fit -OVERSCAN.STAT STR MEAN # MEAN | MEDIAN - -# binned output image options -BIN1.XBIN S32 8 -BIN1.YBIN S32 8 -BIN2.XBIN S32 64 -BIN2.YBIN S32 64 Index: unk/ippconfig/megacam_detrended/psastro.config =================================================================== --- /trunk/ippconfig/megacam_detrended/psastro.config (revision 11590) +++ (revision ) @@ -1,36 +1,0 @@ - -# astrometry matching parameters - -# nominal plate scale (microns / pixel) -# PSASTRO.PLATE.SCALE F32 13.5 -PSASTRO.PLATE.SCALE F32 1.0 - -# pmAstromGridMatch: -PSASTRO.GRID.MIN.ANGLE F32 -0.0851 -PSASTRO.GRID.MAX.ANGLE F32 +0.0851 -PSASTRO.GRID.DEL.ANGLE F32 0.0170 - -# pmAstromGridAngle -# max grid offset in FP units (microns) -# use plate-scale to make this in pixels? -# PSASTRO.GRID.OFFSET F32 10000. -# PSASTRO.GRID.SCALE F32 500. -PSASTRO.GRID.OFFSET F32 1000. -PSASTRO.GRID.SCALE F32 50 - -# these tweak are in FP units (pixels, currently) -PSASTRO.TWEAK.SCALE F32 1 -PSASTRO.TWEAK.RANGE F32 75 -PSASTRO.TWEAK.SMOOTH F32 2 -PSASTRO.TWEAK.NSIGMA F32 3 - -# pmAstromRadiusMatch -# use plate-scale to make this in pixels? -PSASTRO.MATCH.RADIUS F32 8 - -# pmAstromMatchFit -PSASTRO.CHIP.NX S32 3 # fit order -PSASTRO.CHIP.NY S32 3 # fit order -PSASTRO.CHIP.NITER S32 3 # fit clipping iterations -PSASTRO.CHIP.NSIGMA F32 3 # fit clipping sigmas - Index: unk/ippconfig/megacam_detrended/psphot.config =================================================================== --- /trunk/ippconfig/megacam_detrended/psphot.config (revision 11590) +++ (revision ) @@ -1,63 +1,0 @@ - -#SAVE.BACKMDL BOOL TRUE -#SAVE.BACKGND BOOL TRUE -#SAVE.BACKSUB BOOL TRUE -#SAVE.RESID BOOL TRUE -#SAVE.PSF BOOL TRUE -#LOAD.PSF BOOL FALSE -SAVE.PLOTS BOOL TRUE - -# background model : -BACKGROUND.XBIN S32 128 -BACKGROUND.YBIN S32 128 - -# masking parameters -XMIN F32 +0 # minimum valid x-coord -XMAX F32 -0 # maximum valid x-coord -YMIN F32 +0 # minimum valid y-coord -YMAX F32 -0 # maximum valid y-coord -SATURATION F32 50000 # saturation level on this chip - -# image statistics parameters -IMSTATS_NPIX S32 1000 # number of pixels to use for sky estimate boxes: -SKY_HISTOGRAM_BINS F32 1 -SKY_STAT STR FITTED_MEAN_V2 # statistic used to measure background - -# peak finding -PEAKS_NSIGMA_LIMIT F32 25.0 # peak significance threshold - -# basic object statistics -SKY_INNER_RADIUS F32 15 # square annulus for local sky measurement -SKY_OUTER_RADIUS F32 25 # square annulus for local sky measurement -PSF_MOMENTS_RADIUS F32 3 # calculate initial source moments with this radius -PSF_SN_LIM F32 100 # minimum S/N for stars used for PSF model -PSF_MAX_NSTARS S32 300 # limit number of stars used for PSF model - -# PSF model options -PSF_MODEL STR PS_MODEL_QGAUSS - -PSF_FIT_RADIUS F32 15.0 # fitting radius for test PSF model -PSF_REF_RADIUS F32 35.0 # aperture magnitudes are scaled via - # curve-of-growth to this radius -# PSF-like source model parameters -PSF_FIT_NSIGMA F32 1.0 # significance for pixel included in fit -PSF_FIT_PADDING F32 2.0 # extra annulus to use for fit -PSF_SHAPE_NSIGMA F32 3.0 # max significance for shape variation -PSF_MIN_SN F32 2.0 # reject objects below this significance -PSF_MAX_CHI F32 50.0 # reject objects worse that this - -# EXTended source model parameters -EXT_MODEL STR PS_MODEL_PGAUSS -EXT_MIN_SN F32 50.0 # fit galaxies above this S/N limit -EXT_FIT_NSIGMA F32 1 # significance for pixel included in fit -EXT_FIT_PADDING F32 10 # extra annulus to use for fit -EXT_MOMENTS_RADIUS F32 9 - -FITMODE STR BLEND -DEBLEND_PEAK_FRACTION F32 0.1 -DEBLEND_SKY_NSIGMA F32 10.0 - -APTREND STR CONSTANT -FULL_FIT_SN_LIM F32 200.0 -AP_MIN_SN F32 50.0 - Index: unk/ippconfig/megacam_fpamosaic/camera.config =================================================================== --- /trunk/ippconfig/megacam_fpamosaic/camera.config (revision 11590) +++ (revision ) @@ -1,88 +1,0 @@ -# Camera configuration file for MegaCam: describes the camera - -# File formats that we know about (these are relative to PATH) -FORMATS METADATA - MOSAIC STR megacam_fpamosaic/format_mosaic.config -END - - -# Description of camera --- all the chips and the cells that comprise them -FPA METADATA - Chip STR Cell -END - - -# Recipe options -RECIPES METADATA - # Recipes for ppMerge - PPMERGE STR ppMerge_template.config # ppMerge recipe - PPMERGE_BIAS STR megacam/ppMerge_bias.config - PPMERGE_DARK STR megacam/ppMerge_dark.config - PPMERGE_FLAT STR megacam/ppMerge_flat.config - PPMERGE_FRINGE STR megacam/ppMerge_fringe.config - - # Other recipes - PSPHOT STR megacam/psphot.config # psphot details - PSASTRO STR megacam/psastro.config # psastro details - PPSTATS STR megacam/ppStats.config # ppStats recipe -END - -FILERULES METADATA - ### Redirections - PSASTRO.INPUT STR PSASTRO.INPUT.CMP - PSASTRO.OUTPUT STR PSASTRO.OUTPUT.CMP - PSPHOT.OUTPUT STR PSPHOT.OUTPUT.CMF - - ### input file definitions - TYPE INPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA DATA.LEVEL FILE.TYPE - PPIMAGE.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - PPARITH.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - ### use these entries to get the detrend images from specific files - PPIMAGE.MASK INPUT mask.mef.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.BIAS INPUT bias_{CHIP.NAME}_1_0.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.DARK INPUT dark_{CHIP.NAME}_2_0.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.FLAT INPUT flat_{CHIP.NAME}_3_0.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - - ### use these entries to get the detrend images from the database - #PPIMAGE.MASK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.BIAS INPUT @DETDB fpa fpa NONE CHIP IMAGE - #PPIMAGE.DARK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.FLAT INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - - PSPHOT.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - PSASTRO.INPUT.CMP INPUT @FILES NONE NONE PHU CHIP CMP - PSASTRO.INPUT.CMF INPUT @FILES NONE SMPDATA PHU CHIP CMF - - ### output file definitions - TYPE OUTPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA FILE.LEVEL DATA.LEVEL FILE.TYPE FILE.SAVE FILE.FORMAT - PPIMAGE.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE NONE - PPIMAGE.OUTPUT.MASK OUTPUT {OUTPUT}.{CHIP.NAME}.mask.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP MASK FALSE NONE - PPIMAGE.OUTPUT.WEIGHT OUTPUT {OUTPUT}.{CHIP.NAME}.wt.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP WEIGHT FALSE NONE - PPIMAGE.BIN1 OUTPUT {OUTPUT}.{CHIP.NAME}.b1.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE NONE - PPIMAGE.BIN2 OUTPUT {OUTPUT}.{CHIP.NAME}.b2.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE NONE - - PPIMAGE.OUTPUT.CHIP OUTPUT {OUTPUT}.{CHIP.NAME}.chip.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE MOSAIC - PPIMAGE.OUTPUT.FPA1 OUTPUT {OUTPUT}.b1.fit NONE NONE NONE FPA FPA IMAGE FALSE MOSAIC - PPIMAGE.OUTPUT.FPA2 OUTPUT {OUTPUT}.b2.fit NONE NONE NONE FPA FPA IMAGE FALSE MOSAIC - - PPIMAGE.JPEG1 OUTPUT {OUTPUT}.b1.jpg NONE NONE NONE FPA FPA JPEG TRUE NONE - PPIMAGE.JPEG2 OUTPUT {OUTPUT}.b2.jpg NONE NONE NONE FPA FPA JPEG TRUE NONE - - PSPHOT.RESID OUTPUT {OUTPUT}.res.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKGND OUTPUT {OUTPUT}.bck.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKSUB OUTPUT {OUTPUT}.sub.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKMDL OUTPUT {OUTPUT}.mdl.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - - PSPHOT.OUTPUT.RAW OUTPUT {OUTPUT}.{CHIP.NAME} NONE NONE PHU CHIP CHIP RAW TRUE NONE - PSPHOT.OUTPUT.SX OUTPUT {OUTPUT}.sx NONE NONE PHU CHIP CHIP SX TRUE NONE - PSPHOT.OUTPUT.OBJ OUTPUT {OUTPUT}.obj NONE NONE PHU CHIP CHIP OBJ TRUE NONE - PSPHOT.OUTPUT.CMF OUTPUT {OUTPUT}.cmf NONE SMPDATA PHU CHIP CHIP CMF TRUE NONE - PSPHOT.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.cmp NONE NONE PHU CHIP CHIP CMP TRUE NONE - - PSASTRO.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.smp NONE NONE PHU CHIP CHIP CMP TRUE NONE - - PPARITH.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE NONE - -END Index: unk/ippconfig/megacam_fpamosaic/format_mosaic.config =================================================================== --- /trunk/ippconfig/megacam_fpamosaic/format_mosaic.config (revision 11590) +++ (revision ) @@ -1,88 +1,0 @@ -# The spliced MecaCam data is stored in single extensions for each chip - -# How to recognise this type -RULE METADATA - TELESCOP STR CFHT 3.6m - DETECTOR STR MegaCam Mosaicked:FPA -END - -FILE METADATA - # How to read this data - PHU STR FPA # The FITS file represents an entire FPA - EXTENSIONS STR NONE # The extensions represent chips - FPA.NAME STR EXPNUM # A PHU keyword for unique identifier -END - -# What's in the FITS file? -CONTENTS STR Chip:Cell:mosaic - -# Specify the cells -CELLS METADATA - mosaic METADATA - CELL.BIASSEC.SOURCE STR HEADER - CELL.TRIMSEC.SOURCE STR HEADER - CELL.BIASSEC STR BIASSEC - CELL.TRIMSEC STR TRIMSEC - END -END - -# How to translate PS concepts into FITS headers -TRANSLATION METADATA - FPA.NAME STR EXPNUM - FPA.AIRMASS STR AIRMASS - FPA.FILTER STR FILTER - FPA.POSANGLE STR ROTANGLE - FPA.RA STR RA - FPA.DEC STR DEC - FPA.RADECSYS STR RADECSYS - FPA.OBSTYPE STR OBSTYPE - FPA.OBJECT STR CMMTOBS - FPA.ALT STR TELALT - FPA.AZ STR TELAZ - CHIP.TEMP STR DETTEM - CELL.EXPOSURE STR EXPTIME - CELL.DARKTIME STR DARKTIME - CELL.GAIN STR GAIN - CELL.READNOISE STR RDNOISE - CELL.SATURATION STR SATURATE - CELL.TIME STR MJD-OBS - CELL.XBIN STR CCDBIN1 - CELL.YBIN STR CCDBIN2 -END - -# Default PS concepts that may be specified by value -DEFAULTS METADATA - CELL.READDIR S32 1 # Cell is read in x direction - CELL.BAD S32 0 - CELL.TIMESYS STR UTC - CELL.XPARITY S32 1 - CELL.YPARITY S32 1 - CHIP.XPARITY S32 1 - CHIP.YPARITY S32 1 - CHIP.X0 S32 0 - CHIP.X0 S32 0 - CELL.X0 S32 0 - CELL.Y0 S32 0 -END - - -# How to translation PS concepts into database lookups -DATABASE METADATA - TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS -# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME -# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME - -# A database entry refers to a particular column (COLUMN) in a -# particular table (TABLE), given certain PS concepts (GIVENPS) that -# match certain database columns (GIVENDBCOL). -END - - -# Where there might be some ambiguity, specify the format -FORMATS METADATA - FPA.RA STR HOURS - FPA.DEC STR DEGREES - CELL.TIME STR MJD -END - - Index: unk/ippconfig/ucam_mosaic/camera.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/camera.config (revision 11590) +++ (revision ) @@ -1,128 +1,0 @@ -# Camera configuration file for MegaCam: describes the camera - -# File formats that we know about (these are relative to PATH) -FORMATS METADATA - MOSAIC STR ucam_mosaic/format_mosaic.config -END - - -# Description of camera --- all the chips and the cells that comprise them -FPA METADATA - chip STR cell -END - -# move this elsewhere? we need a lookup table to go from filter ID to abstract name -FILTER.ID METADATA - u.MP9301 STR u - g.MP9401 STR g - r.MP9601 STR r - i.MP9701 STR i - z.MP9801 STR z - Zp STR z - Zprime STR z - Ha.MP7605 STR Ha - Halpha STR Ha - Haalpha.on STR Ha - HaOFF.MP7604 STR HaOff - - CN.MP780 STR CN - cn.MP7803 STR CN - CN.MP7803 STR CN - - TiO.MP77 STR TiO - tio.MP7701 STR TiO - TiO.MP7701 STR TiO - NB920 STR NB920 - - B2F STR B2F - Bj STR Bj - Vj STR Vj - Rj STR Rj - Ij STR Ij - Hb STR Hb - HbOff STR HbOff -END - -# Recipe options -RECIPES METADATA - # Recipes for ppImage - PPIMAGE STR ucam/ppImage.config # Default: all (normal) options on - PPIMAGE_O STR ucam/ppImage_o.config # Overscan only - PPIMAGE_OB STR ucam/ppImage_ob.config # Overscan, bias only - PPIMAGE_OBD STR ucam/ppImage_obd.config # Overscan, bias, dark only - PPIMAGE_OBDF STR ucam/ppImage_obdf.config # Overscan, bias, dark, flat only - PPIMAGE_B STR ucam/ppImage_b.config # Bias only - PPIMAGE_D STR ucam/ppImage_d.config # Dark only - PPIMAGE_F STR ucam/ppImage_f.config # Flat only - PPIMAGE_J STR ucam/ppImage_j.config # JPEG only - - # Recipes for ppMerge - PPMERGE_BIAS STR ucam/ppMerge_bias.config - # Other recipes - PPMERGE STR ppMerge_template.config # ppMerge recipe - PSPHOT STR ucam/psphot.config # psphot details - PSASTRO STR ucam/psastro.config # psastro details - PPSTATS STR ucam/ppStats.config # ppStats recipe -END - -FILERULES METADATA - PPIMAGE.OUTPUT STR PPIMAGE.OUTPUT - PPIMAGE.BIN1 STR PPIMAGE.BIN1.OUTPUT - PPIMAGE.BIN2 STR PPIMAGE.BIN2.OUTPUT - PPIMAGE.JPEG1 STR PPIMAGE.JPEG1.OUTPUT - PPIMAGE.JPEG2 STR PPIMAGE.JPEG2.OUTPUT - - PSASTRO.INPUT STR PSASTRO.INPUT.CMP - PSASTRO.OUTPUT STR PSASTRO.OUTPUT.CMP - PSPHOT.OUTPUT STR PSPHOT.OUTPUT.CMF - - ### input file definitions - TYPE INPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA DATA.LEVEL FILE.TYPE - PPIMAGE.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - PPARITH.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - ### use these entries to get the detrend images from specific files - PPIMAGE.MASK INPUT mask.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.BIAS INPUT bias.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.DARK INPUT dark.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - PPIMAGE.FLAT INPUT flat.fits {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - - ### use these entries to get the detrend images from the database - #PPIMAGE.MASK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.BIAS INPUT @DETDB fpa fpa NONE CHIP IMAGE - #PPIMAGE.DARK INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - #PPIMAGE.FLAT INPUT @DETDB {CHIP.NAME} {CHIP.NAME} NONE CHIP IMAGE - - PSPHOT.INPUT INPUT @FILES {CHIP.NAME} {CELL.NAME} NONE CHIP IMAGE - - PSASTRO.INPUT.CMP INPUT @FILES NONE NONE PHU CHIP CMP - PSASTRO.INPUT.CMF INPUT @FILES NONE SMPDATA PHU CHIP CMF - - ### output file definitions - TYPE OUTPUT FILENAME.RULE FILENAME.XTRA EXTNAME.RULE EXTNAME.XTRA FILE.LEVEL DATA.LEVEL FILE.TYPE FILE.SAVE FILE.FORMAT - PPIMAGE.OUTPUT OUTPUT {OUTPUT}.fit NONE NONE NONE FPA CHIP IMAGE TRUE NONE - PPIMAGE.OUTPUT.CHIP OUTPUT {OUTPUT}.chip.fit NONE NONE NONE FPA CHIP IMAGE TRUE NONE - PPIMAGE.OUTPUT.FPA1 OUTPUT {OUTPUT}.fpa1.fit NONE NONE NONE FPA CHIP IMAGE TRUE NONE - PPIMAGE.OUTPUT.FPA2 OUTPUT {OUTPUT}.fpa2.fit NONE NONE NONE FPA CHIP IMAGE TRUE NONE - - PPIMAGE.BIN1.OUTPUT OUTPUT {OUTPUT}.b1.fit NONE NONE NONE CHIP FPA IMAGE TRUE UCAM_MOSAIC:MOSAIC - PPIMAGE.BIN2.OUTPUT OUTPUT {OUTPUT}.b2.fit NONE NONE NONE CHIP FPA IMAGE TRUE UCAM_MOSAIC:MOSAIC - PPIMAGE.JPEG1.OUTPUT OUTPUT {OUTPUT}.b1.jpg NONE NONE NONE FPA FPA JPEG TRUE NONE - PPIMAGE.JPEG2.OUTPUT OUTPUT {OUTPUT}.b2.jpg NONE NONE NONE FPA FPA JPEG TRUE NONE - - PSPHOT.RESID OUTPUT {OUTPUT}.res.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKGND OUTPUT {OUTPUT}.bck.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKSUB OUTPUT {OUTPUT}.sub.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - PSPHOT.BACKMDL OUTPUT {OUTPUT}.mdl.fits NONE {CELL.NAME} {CELL.NAME} CHIP CHIP IMAGE TRUE SPLICE - - PSPHOT.OUTPUT.RAW OUTPUT {OUTPUT}.{CHIP.NAME} NONE NONE PHU CHIP CHIP RAW TRUE NONE - PSPHOT.OUTPUT.SX OUTPUT {OUTPUT}.sx NONE NONE PHU CHIP CHIP SX TRUE NONE - PSPHOT.OUTPUT.OBJ OUTPUT {OUTPUT}.obj NONE NONE PHU CHIP CHIP OBJ TRUE NONE - PSPHOT.OUTPUT.CMF OUTPUT {OUTPUT}.cmf NONE SMPDATA PHU CHIP CHIP CMF TRUE NONE - PSPHOT.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.cmp NONE NONE PHU CHIP CHIP CMP TRUE NONE - - PSASTRO.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.smp NONE NONE PHU CHIP CHIP CMP TRUE NONE - - PPARITH.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fit {CHIP.NAME} {CHIP.NAME} NONE CHIP CHIP IMAGE TRUE NONE - -END Index: unk/ippconfig/ucam_mosaic/format_mosaic.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/format_mosaic.config (revision 11590) +++ (revision ) @@ -1,78 +1,0 @@ -### Raw data from microCam - -# How to identify this type -RULE METADATA - ORIGIN STR PS0 - INSTRUME STR ucam1Mosaicked -END - -# How to read this data -FILE METADATA - PHU STR FPA # The FITS file represents an entire FPA - EXTENSIONS STR NONE # The extensions represent cells - FPA.NAME STR CMMTOBS # A PHU keyword for unique identifier within the hierarchy level -END - -# What's in the FITS file? -CONTENTS STR chip:cell:mosaicCell - -# Specify the cell data -CELLS METADATA - mosaicCell METADATA # Mosaicked cell - CELL.BIASSEC.SOURCE STR HEADER - CELL.TRIMSEC.SOURCE STR HEADER - CELL.BIASSEC STR BIASSEC - CELL.TRIMSEC STR DATASEC - END -END - -# How to translate PS concepts into FITS headers -TRANSLATION METADATA - FPA.AIRMASS STR AIRMASS - FPA.FILTER STR FILTER - FPA.POSANGLE STR ROTANGLE - FPA.RA STR RA - FPA.DEC STR DEC - FPA.RADECSYS STR RADECSYS - CELL.TIME STR DATE-OBS - CELL.EXPOSURE STR EXPTIME - CELL.DARKTIME STR DARKTIME - CELL.XBIN STR CCDBIN1 - CELL.YBIN STR CCDBIN2 - CELL.X0 STR IMNPIX1 - CELL.Y0 STR IMNPIX2 -END - -# Default PS concepts that may be specified by value -DEFAULTS METADATA - CELL.GAIN F32 1 - CELL.READNOISE F32 10.0 - CELL.SATURATION F32 65535 - CELL.BAD F32 0 - CELL.READDIR S32 1 - CELL.TIMESYS STR UTC - CHIP.X0 S32 0 - CHIP.Y0 S32 0 - CHIP.XPARITY S32 1 - CHIP.YPARITY S32 1 - CELL.XPARITY S32 1 - CELL.YPARITY S32 1 -END - -# How to translation PS concepts into database lookups -DATABASE METADATA - TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS -# A database entry refers to a particular column (COLUMN) in a -# particular table (TABLE), given certain PS concepts (GIVENPS) that -# match certain database columns (GIVENDBCOL). -END - - -# Where there might be some ambiguity, specify the format -FORMATS METADATA - FPA.RA STR HOURS - FPA.DEC STR DEGREES - CELL.TIME STR MJD - CELL.X0 STR FORTRAN - CELL.Y0 STR FORTRAN -END Index: unk/ippconfig/ucam_mosaic/ppImage.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/ppImage.config (revision 11590) +++ (revision ) @@ -1,82 +1,0 @@ -### Phase 2 recipe configuration file - -# List of tasks to perform -MASK BOOL FALSE # Mask bad pixels -MASK.VALUE U8 0x10 # only mask pixels matching this bitmask -NONLIN BOOL FALSE # Non-linearity correction -OVERSCAN BOOL TRUE # Overscan subtraction -BIAS BOOL TRUE # Bias subtraction -DARK BOOL TRUE # Dark subtraction -FLAT BOOL TRUE # Flat-field normalisation -FRINGE BOOL FALSE # Fringe subtraction -PHOTOM BOOL FALSE # Source identification and photometry -ASTROM.CHIP BOOL FALSE -ASTROM.MOSAIC BOOL FALSE # Astrometry - -BASE.FITS BOOL TRUE # Save base detrended image? -CHIP.FITS BOOL TRUE # Save chip-mosaic-ed image? -FPA1.FITS BOOL TRUE # Save 1st binned fpa image? -FPA2.FITS BOOL TRUE # Save 2nd binned fpa image? -BIN1.FITS BOOL TRUE # Save 1st binned chip image? -BIN2.FITS BOOL TRUE # Save 2nd binned chip image? -BIN1.JPEG BOOL TRUE # Save 1st binned jpeg? -BIN2.JPEG BOOL FALSE # Save 2nd binned jpeg? - -# Non-linearity correction -NONLIN.SOURCE STR CHIP.NAME # How to determine the source -#@NONLIN.DATA F32 0.0 1.001 0.001 # A polynomial -NONLIN.DATA STR nonlin.dat # Filename for lookup table -#NONLIN.DATA METADATA # Source of non-linearity data -# ccd00 STR nonlin00.dat # A lookup table -# @ccd01 F32 0.0 1.001 0.001 # A polynomial -# @ccd02 F32 0.0 1.001 0.001 # A polynomial -# @ccd03 F32 1.2345 # A polynomial -# @ccd04 F32 0.0 1.001 0.001 # A polynomial -# @ccd05 F32 0.0 1.001 0.001 # A polynomial -# @ccd06 F32 0.0 1.001 0.001 # A polynomial -# @ccd07 F32 0.0 1.001 0.001 # A polynomial -# @ccd08 F32 0.0 1.001 0.001 # A polynomial -# @ccd09 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd11 F32 0.0 1.001 0.001 # A polynomial -# @ccd12 F32 0.0 1.001 0.001 # A polynomial -# @ccd13 F32 0.0 1.001 0.001 # A polynomial -# @ccd14 F32 0.0 1.001 0.001 # A polynomial -# @ccd15 F32 0.0 1.001 0.001 # A polynomial -# @ccd16 F32 0.0 1.001 0.001 # A polynomial -# @ccd17 F32 0.0 1.001 0.001 # A polynomial -# @ccd18 F32 0.0 1.001 0.001 # A polynomial -# @ccd19 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd21 F32 0.0 1.001 0.001 # A polynomial -# @ccd22 F32 0.0 1.001 0.001 # A polynomial -# @ccd23 F32 0.0 1.001 0.001 # A polynomial -# @ccd24 F32 0.0 1.001 0.001 # A polynomial -# @ccd25 F32 0.0 1.001 0.001 # A polynomial -# @ccd26 F32 0.0 1.001 0.001 # A polynomial -# @ccd27 F32 0.0 1.001 0.001 # A polynomial -# @ccd28 F32 0.0 1.001 0.001 # A polynomial -# @ccd29 F32 0.0 1.001 0.001 # A polynomial -# @ccd30 F32 0.0 1.001 0.001 # A polynomial -# @ccd31 F32 0.0 1.001 0.001 # A polynomial -# @ccd32 F32 0.0 1.001 0.001 # A polynomial -# @ccd33 F32 0.0 1.001 0.001 # A polynomial -# @ccd34 F32 0.0 1.001 0.001 # A polynomial -# @ccd35 F32 0.0 1.001 0.001 # A polynomial -# @ccd36 F32 0.0 1.001 0.001 # A polynomial -#END - -# Overscan subtraction -OVERSCAN.SINGLE BOOL FALSE # Reduce overscan to a single value? -#OVERSCAN.FIT STR SPLINE # NONE | POLYNOMIAL | SPLINE -OVERSCAN.FIT STR POLYNOMIAL # NONE | POLYNOMIAL | SPLINE -OVERSCAN.ORDER S32 5 # Order of polynomial fit -OVERSCAN.STAT STR MEAN # MEAN | MEDIAN - -# binned output image options -BIN1.XBIN S32 8 -BIN1.YBIN S32 8 -BIN2.XBIN S32 64 -BIN2.YBIN S32 64 - -PHOTCODE.RULE STR {CAMERA}.{FILTER.ID}.{CHIP.N} Index: unk/ippconfig/ucam_mosaic/ppImage_b.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/ppImage_b.config (revision 11590) +++ (revision ) @@ -1,82 +1,0 @@ -### Phase 2 recipe configuration file - -# List of tasks to perform -MASK BOOL FALSE # Mask bad pixels -MASK.VALUE U8 0x10 # only mask pixels matching this bitmask -NONLIN BOOL FALSE # Non-linearity correction -OVERSCAN BOOL FALSE # Overscan subtraction -BIAS BOOL TRUE # Bias subtraction -DARK BOOL FALSE # Dark subtraction -FLAT BOOL FALSE # Flat-field normalisation -FRINGE BOOL FALSE # Fringe subtraction -PHOTOM BOOL FALSE # Source identification and photometry -ASTROM.CHIP BOOL FALSE -ASTROM.MOSAIC BOOL FALSE # Astrometry - -BASE.FITS BOOL TRUE # Save base detrended image? -CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? -FPA1.FITS BOOL FALSE # Save 1st binned fpa image? -FPA2.FITS BOOL FALSE # Save 2nd binned fpa image? -BIN1.FITS BOOL TRUE # Save 1st binned chip image? -BIN2.FITS BOOL TRUE # Save 2nd binned chip image? -BIN1.JPEG BOOL FALSE # Save 1st binned jpeg? -BIN2.JPEG BOOL FALSE # Save 2nd binned jpeg? - -# Non-linearity correction -NONLIN.SOURCE STR CHIP.NAME # How to determine the source -#@NONLIN.DATA F32 0.0 1.001 0.001 # A polynomial -NONLIN.DATA STR nonlin.dat # Filename for lookup table -#NONLIN.DATA METADATA # Source of non-linearity data -# ccd00 STR nonlin00.dat # A lookup table -# @ccd01 F32 0.0 1.001 0.001 # A polynomial -# @ccd02 F32 0.0 1.001 0.001 # A polynomial -# @ccd03 F32 1.2345 # A polynomial -# @ccd04 F32 0.0 1.001 0.001 # A polynomial -# @ccd05 F32 0.0 1.001 0.001 # A polynomial -# @ccd06 F32 0.0 1.001 0.001 # A polynomial -# @ccd07 F32 0.0 1.001 0.001 # A polynomial -# @ccd08 F32 0.0 1.001 0.001 # A polynomial -# @ccd09 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd11 F32 0.0 1.001 0.001 # A polynomial -# @ccd12 F32 0.0 1.001 0.001 # A polynomial -# @ccd13 F32 0.0 1.001 0.001 # A polynomial -# @ccd14 F32 0.0 1.001 0.001 # A polynomial -# @ccd15 F32 0.0 1.001 0.001 # A polynomial -# @ccd16 F32 0.0 1.001 0.001 # A polynomial -# @ccd17 F32 0.0 1.001 0.001 # A polynomial -# @ccd18 F32 0.0 1.001 0.001 # A polynomial -# @ccd19 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd21 F32 0.0 1.001 0.001 # A polynomial -# @ccd22 F32 0.0 1.001 0.001 # A polynomial -# @ccd23 F32 0.0 1.001 0.001 # A polynomial -# @ccd24 F32 0.0 1.001 0.001 # A polynomial -# @ccd25 F32 0.0 1.001 0.001 # A polynomial -# @ccd26 F32 0.0 1.001 0.001 # A polynomial -# @ccd27 F32 0.0 1.001 0.001 # A polynomial -# @ccd28 F32 0.0 1.001 0.001 # A polynomial -# @ccd29 F32 0.0 1.001 0.001 # A polynomial -# @ccd30 F32 0.0 1.001 0.001 # A polynomial -# @ccd31 F32 0.0 1.001 0.001 # A polynomial -# @ccd32 F32 0.0 1.001 0.001 # A polynomial -# @ccd33 F32 0.0 1.001 0.001 # A polynomial -# @ccd34 F32 0.0 1.001 0.001 # A polynomial -# @ccd35 F32 0.0 1.001 0.001 # A polynomial -# @ccd36 F32 0.0 1.001 0.001 # A polynomial -#END - -# Overscan subtraction -OVERSCAN.SINGLE BOOL FALSE # Reduce overscan to a single value? -#OVERSCAN.FIT STR SPLINE # NONE | POLYNOMIAL | SPLINE -OVERSCAN.FIT STR POLYNOMIAL # NONE | POLYNOMIAL | SPLINE -OVERSCAN.ORDER S32 5 # Order of polynomial fit -OVERSCAN.STAT STR MEAN # MEAN | MEDIAN - -# binned output image options -BIN1.XBIN S32 8 -BIN1.YBIN S32 8 -BIN2.XBIN S32 64 -BIN2.YBIN S32 64 - -PHOTCODE.RULE STR {CAMERA}.{FILTER.ID}.{CHIP.N} Index: unk/ippconfig/ucam_mosaic/ppImage_d.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/ppImage_d.config (revision 11590) +++ (revision ) @@ -1,82 +1,0 @@ -### Phase 2 recipe configuration file - -# List of tasks to perform -MASK BOOL FALSE # Mask bad pixels -MASK.VALUE U8 0x10 # only mask pixels matching this bitmask -NONLIN BOOL FALSE # Non-linearity correction -OVERSCAN BOOL FALSE # Overscan subtraction -BIAS BOOL FALSE # Bias subtraction -DARK BOOL TRUE # Dark subtraction -FLAT BOOL FALSE # Flat-field normalisation -FRINGE BOOL FALSE # Fringe subtraction -PHOTOM BOOL FALSE # Source identification and photometry -ASTROM.CHIP BOOL FALSE -ASTROM.MOSAIC BOOL FALSE # Astrometry - -BASE.FITS BOOL TRUE # Save base detrended image? -CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? -FPA1.FITS BOOL FALSE # Save 1st binned fpa image? -FPA2.FITS BOOL FALSE # Save 2nd binned fpa image? -BIN1.FITS BOOL TRUE # Save 1st binned chip image? -BIN2.FITS BOOL TRUE # Save 2nd binned chip image? -BIN1.JPEG BOOL FALSE # Save 1st binned jpeg? -BIN2.JPEG BOOL FALSE # Save 2nd binned jpeg? - -# Non-linearity correction -NONLIN.SOURCE STR CHIP.NAME # How to determine the source -#@NONLIN.DATA F32 0.0 1.001 0.001 # A polynomial -NONLIN.DATA STR nonlin.dat # Filename for lookup table -#NONLIN.DATA METADATA # Source of non-linearity data -# ccd00 STR nonlin00.dat # A lookup table -# @ccd01 F32 0.0 1.001 0.001 # A polynomial -# @ccd02 F32 0.0 1.001 0.001 # A polynomial -# @ccd03 F32 1.2345 # A polynomial -# @ccd04 F32 0.0 1.001 0.001 # A polynomial -# @ccd05 F32 0.0 1.001 0.001 # A polynomial -# @ccd06 F32 0.0 1.001 0.001 # A polynomial -# @ccd07 F32 0.0 1.001 0.001 # A polynomial -# @ccd08 F32 0.0 1.001 0.001 # A polynomial -# @ccd09 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd11 F32 0.0 1.001 0.001 # A polynomial -# @ccd12 F32 0.0 1.001 0.001 # A polynomial -# @ccd13 F32 0.0 1.001 0.001 # A polynomial -# @ccd14 F32 0.0 1.001 0.001 # A polynomial -# @ccd15 F32 0.0 1.001 0.001 # A polynomial -# @ccd16 F32 0.0 1.001 0.001 # A polynomial -# @ccd17 F32 0.0 1.001 0.001 # A polynomial -# @ccd18 F32 0.0 1.001 0.001 # A polynomial -# @ccd19 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd21 F32 0.0 1.001 0.001 # A polynomial -# @ccd22 F32 0.0 1.001 0.001 # A polynomial -# @ccd23 F32 0.0 1.001 0.001 # A polynomial -# @ccd24 F32 0.0 1.001 0.001 # A polynomial -# @ccd25 F32 0.0 1.001 0.001 # A polynomial -# @ccd26 F32 0.0 1.001 0.001 # A polynomial -# @ccd27 F32 0.0 1.001 0.001 # A polynomial -# @ccd28 F32 0.0 1.001 0.001 # A polynomial -# @ccd29 F32 0.0 1.001 0.001 # A polynomial -# @ccd30 F32 0.0 1.001 0.001 # A polynomial -# @ccd31 F32 0.0 1.001 0.001 # A polynomial -# @ccd32 F32 0.0 1.001 0.001 # A polynomial -# @ccd33 F32 0.0 1.001 0.001 # A polynomial -# @ccd34 F32 0.0 1.001 0.001 # A polynomial -# @ccd35 F32 0.0 1.001 0.001 # A polynomial -# @ccd36 F32 0.0 1.001 0.001 # A polynomial -#END - -# Overscan subtraction -OVERSCAN.SINGLE BOOL FALSE # Reduce overscan to a single value? -#OVERSCAN.FIT STR SPLINE # NONE | POLYNOMIAL | SPLINE -OVERSCAN.FIT STR POLYNOMIAL # NONE | POLYNOMIAL | SPLINE -OVERSCAN.ORDER S32 5 # Order of polynomial fit -OVERSCAN.STAT STR MEAN # MEAN | MEDIAN - -# binned output image options -BIN1.XBIN S32 8 -BIN1.YBIN S32 8 -BIN2.XBIN S32 64 -BIN2.YBIN S32 64 - -PHOTCODE.RULE STR {CAMERA}.{FILTER.ID}.{CHIP.N} Index: unk/ippconfig/ucam_mosaic/ppImage_f.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/ppImage_f.config (revision 11590) +++ (revision ) @@ -1,82 +1,0 @@ -### Phase 2 recipe configuration file - -# List of tasks to perform -MASK BOOL FALSE # Mask bad pixels -MASK.VALUE U8 0x10 # only mask pixels matching this bitmask -NONLIN BOOL FALSE # Non-linearity correction -OVERSCAN BOOL FALSE # Overscan subtraction -BIAS BOOL FALSE # Bias subtraction -DARK BOOL FALSE # Dark subtraction -FLAT BOOL TRUE # Flat-field normalisation -FRINGE BOOL FALSE # Fringe subtraction -PHOTOM BOOL FALSE # Source identification and photometry -ASTROM.CHIP BOOL FALSE -ASTROM.MOSAIC BOOL FALSE # Astrometry - -BASE.FITS BOOL TRUE # Save base detrended image? -CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? -FPA1.FITS BOOL FALSE # Save 1st binned fpa image? -FPA2.FITS BOOL FALSE # Save 2nd binned fpa image? -BIN1.FITS BOOL TRUE # Save 1st binned chip image? -BIN2.FITS BOOL TRUE # Save 2nd binned chip image? -BIN1.JPEG BOOL FALSE # Save 1st binned jpeg? -BIN2.JPEG BOOL FALSE # Save 2nd binned jpeg? - -# Non-linearity correction -NONLIN.SOURCE STR CHIP.NAME # How to determine the source -#@NONLIN.DATA F32 0.0 1.001 0.001 # A polynomial -NONLIN.DATA STR nonlin.dat # Filename for lookup table -#NONLIN.DATA METADATA # Source of non-linearity data -# ccd00 STR nonlin00.dat # A lookup table -# @ccd01 F32 0.0 1.001 0.001 # A polynomial -# @ccd02 F32 0.0 1.001 0.001 # A polynomial -# @ccd03 F32 1.2345 # A polynomial -# @ccd04 F32 0.0 1.001 0.001 # A polynomial -# @ccd05 F32 0.0 1.001 0.001 # A polynomial -# @ccd06 F32 0.0 1.001 0.001 # A polynomial -# @ccd07 F32 0.0 1.001 0.001 # A polynomial -# @ccd08 F32 0.0 1.001 0.001 # A polynomial -# @ccd09 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd11 F32 0.0 1.001 0.001 # A polynomial -# @ccd12 F32 0.0 1.001 0.001 # A polynomial -# @ccd13 F32 0.0 1.001 0.001 # A polynomial -# @ccd14 F32 0.0 1.001 0.001 # A polynomial -# @ccd15 F32 0.0 1.001 0.001 # A polynomial -# @ccd16 F32 0.0 1.001 0.001 # A polynomial -# @ccd17 F32 0.0 1.001 0.001 # A polynomial -# @ccd18 F32 0.0 1.001 0.001 # A polynomial -# @ccd19 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd21 F32 0.0 1.001 0.001 # A polynomial -# @ccd22 F32 0.0 1.001 0.001 # A polynomial -# @ccd23 F32 0.0 1.001 0.001 # A polynomial -# @ccd24 F32 0.0 1.001 0.001 # A polynomial -# @ccd25 F32 0.0 1.001 0.001 # A polynomial -# @ccd26 F32 0.0 1.001 0.001 # A polynomial -# @ccd27 F32 0.0 1.001 0.001 # A polynomial -# @ccd28 F32 0.0 1.001 0.001 # A polynomial -# @ccd29 F32 0.0 1.001 0.001 # A polynomial -# @ccd30 F32 0.0 1.001 0.001 # A polynomial -# @ccd31 F32 0.0 1.001 0.001 # A polynomial -# @ccd32 F32 0.0 1.001 0.001 # A polynomial -# @ccd33 F32 0.0 1.001 0.001 # A polynomial -# @ccd34 F32 0.0 1.001 0.001 # A polynomial -# @ccd35 F32 0.0 1.001 0.001 # A polynomial -# @ccd36 F32 0.0 1.001 0.001 # A polynomial -#END - -# Overscan subtraction -OVERSCAN.SINGLE BOOL FALSE # Reduce overscan to a single value? -#OVERSCAN.FIT STR SPLINE # NONE | POLYNOMIAL | SPLINE -OVERSCAN.FIT STR POLYNOMIAL # NONE | POLYNOMIAL | SPLINE -OVERSCAN.ORDER S32 5 # Order of polynomial fit -OVERSCAN.STAT STR MEAN # MEAN | MEDIAN - -# binned output image options -BIN1.XBIN S32 8 -BIN1.YBIN S32 8 -BIN2.XBIN S32 64 -BIN2.YBIN S32 64 - -PHOTCODE.RULE STR {CAMERA}.{FILTER.ID}.{CHIP.N} Index: unk/ippconfig/ucam_mosaic/ppImage_j.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/ppImage_j.config (revision 11590) +++ (revision ) @@ -1,85 +1,0 @@ -### Phase 2 recipe configuration file - -### A little bit of a cheat to make a mosaicked binned JPEG from the binned FITS file. -### Set binning to 1, since the input will already be binned. - -# List of tasks to perform -MASK BOOL FALSE # Mask bad pixels -MASK.VALUE U8 0xff # only mask pixels matching this bitmask -NONLIN BOOL FALSE # Non-linearity correction -OVERSCAN BOOL FALSE # Overscan subtraction -BIAS BOOL FALSE # Bias subtraction -DARK BOOL FALSE # Dark subtraction -FLAT BOOL FALSE # Flat-field normalisation -FRINGE BOOL FALSE # Fringe subtraction -PHOTOM BOOL FALSE # Source identification and photometry -ASTROM.CHIP BOOL FALSE -ASTROM.MOSAIC BOOL FALSE # Astrometry - -BASE.FITS BOOL FALSE # Save base detrended image? -CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? -FPA1.FITS BOOL FALSE # Save 1st binned fpa image? -FPA2.FITS BOOL FALSE # Save 2nd binned fpa image? -BIN1.FITS BOOL FALSE # Save 1st binned chip image? -BIN2.FITS BOOL FALSE # Save 2nd binned chip image? -BIN1.JPEG BOOL TRUE # Save 1st binned jpeg? -BIN2.JPEG BOOL FALSE # Save 2nd binned jpeg? - -# Non-linearity correction -NONLIN.SOURCE STR CHIP.NAME # How to determine the source -#@NONLIN.DATA F32 0.0 1.001 0.001 # A polynomial -NONLIN.DATA STR nonlin.dat # Filename for lookup table -#NONLIN.DATA METADATA # Source of non-linearity data -# ccd00 STR nonlin00.dat # A lookup table -# @ccd01 F32 0.0 1.001 0.001 # A polynomial -# @ccd02 F32 0.0 1.001 0.001 # A polynomial -# @ccd03 F32 1.2345 # A polynomial -# @ccd04 F32 0.0 1.001 0.001 # A polynomial -# @ccd05 F32 0.0 1.001 0.001 # A polynomial -# @ccd06 F32 0.0 1.001 0.001 # A polynomial -# @ccd07 F32 0.0 1.001 0.001 # A polynomial -# @ccd08 F32 0.0 1.001 0.001 # A polynomial -# @ccd09 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd11 F32 0.0 1.001 0.001 # A polynomial -# @ccd12 F32 0.0 1.001 0.001 # A polynomial -# @ccd13 F32 0.0 1.001 0.001 # A polynomial -# @ccd14 F32 0.0 1.001 0.001 # A polynomial -# @ccd15 F32 0.0 1.001 0.001 # A polynomial -# @ccd16 F32 0.0 1.001 0.001 # A polynomial -# @ccd17 F32 0.0 1.001 0.001 # A polynomial -# @ccd18 F32 0.0 1.001 0.001 # A polynomial -# @ccd19 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd21 F32 0.0 1.001 0.001 # A polynomial -# @ccd22 F32 0.0 1.001 0.001 # A polynomial -# @ccd23 F32 0.0 1.001 0.001 # A polynomial -# @ccd24 F32 0.0 1.001 0.001 # A polynomial -# @ccd25 F32 0.0 1.001 0.001 # A polynomial -# @ccd26 F32 0.0 1.001 0.001 # A polynomial -# @ccd27 F32 0.0 1.001 0.001 # A polynomial -# @ccd28 F32 0.0 1.001 0.001 # A polynomial -# @ccd29 F32 0.0 1.001 0.001 # A polynomial -# @ccd30 F32 0.0 1.001 0.001 # A polynomial -# @ccd31 F32 0.0 1.001 0.001 # A polynomial -# @ccd32 F32 0.0 1.001 0.001 # A polynomial -# @ccd33 F32 0.0 1.001 0.001 # A polynomial -# @ccd34 F32 0.0 1.001 0.001 # A polynomial -# @ccd35 F32 0.0 1.001 0.001 # A polynomial -# @ccd36 F32 0.0 1.001 0.001 # A polynomial -#END - -# Overscan subtraction -OVERSCAN.SINGLE BOOL FALSE # Reduce overscan to a single value? -#OVERSCAN.FIT STR SPLINE # NONE | POLYNOMIAL | SPLINE -OVERSCAN.FIT STR POLYNOMIAL # NONE | POLYNOMIAL | SPLINE -OVERSCAN.ORDER S32 5 # Order of polynomial fit -OVERSCAN.STAT STR MEAN # MEAN | MEDIAN - -# binned output image options -BIN1.XBIN S32 1 -BIN1.YBIN S32 1 -BIN2.XBIN S32 64 -BIN2.YBIN S32 64 - -PHOTCODE.RULE STR {CAMERA}.{FILTER.ID}.{CHIP.N} Index: unk/ippconfig/ucam_mosaic/ppImage_o.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/ppImage_o.config (revision 11590) +++ (revision ) @@ -1,82 +1,0 @@ -### Phase 2 recipe configuration file - -# List of tasks to perform -MASK BOOL FALSE # Mask bad pixels -MASK.VALUE U8 0x10 # only mask pixels matching this bitmask -NONLIN BOOL FALSE # Non-linearity correction -OVERSCAN BOOL TRUE # Overscan subtraction -BIAS BOOL FALSE # Bias subtraction -DARK BOOL FALSE # Dark subtraction -FLAT BOOL FALSE # Flat-field normalisation -FRINGE BOOL FALSE # Fringe subtraction -PHOTOM BOOL FALSE # Source identification and photometry -ASTROM.CHIP BOOL FALSE -ASTROM.MOSAIC BOOL FALSE # Astrometry - -BASE.FITS BOOL TRUE # Save base detrended image? -CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? -FPA1.FITS BOOL FALSE # Save 1st binned fpa image? -FPA2.FITS BOOL FALSE # Save 2nd binned fpa image? -BIN1.FITS BOOL FALSE # Save 1st binned chip image? -BIN2.FITS BOOL FALSE # Save 2nd binned chip image? -BIN1.JPEG BOOL FALSE # Save 1st binned jpeg? -BIN2.JPEG BOOL FALSE # Save 2nd binned jpeg? - -# Non-linearity correction -NONLIN.SOURCE STR CHIP.NAME # How to determine the source -#@NONLIN.DATA F32 0.0 1.001 0.001 # A polynomial -NONLIN.DATA STR nonlin.dat # Filename for lookup table -#NONLIN.DATA METADATA # Source of non-linearity data -# ccd00 STR nonlin00.dat # A lookup table -# @ccd01 F32 0.0 1.001 0.001 # A polynomial -# @ccd02 F32 0.0 1.001 0.001 # A polynomial -# @ccd03 F32 1.2345 # A polynomial -# @ccd04 F32 0.0 1.001 0.001 # A polynomial -# @ccd05 F32 0.0 1.001 0.001 # A polynomial -# @ccd06 F32 0.0 1.001 0.001 # A polynomial -# @ccd07 F32 0.0 1.001 0.001 # A polynomial -# @ccd08 F32 0.0 1.001 0.001 # A polynomial -# @ccd09 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd11 F32 0.0 1.001 0.001 # A polynomial -# @ccd12 F32 0.0 1.001 0.001 # A polynomial -# @ccd13 F32 0.0 1.001 0.001 # A polynomial -# @ccd14 F32 0.0 1.001 0.001 # A polynomial -# @ccd15 F32 0.0 1.001 0.001 # A polynomial -# @ccd16 F32 0.0 1.001 0.001 # A polynomial -# @ccd17 F32 0.0 1.001 0.001 # A polynomial -# @ccd18 F32 0.0 1.001 0.001 # A polynomial -# @ccd19 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd21 F32 0.0 1.001 0.001 # A polynomial -# @ccd22 F32 0.0 1.001 0.001 # A polynomial -# @ccd23 F32 0.0 1.001 0.001 # A polynomial -# @ccd24 F32 0.0 1.001 0.001 # A polynomial -# @ccd25 F32 0.0 1.001 0.001 # A polynomial -# @ccd26 F32 0.0 1.001 0.001 # A polynomial -# @ccd27 F32 0.0 1.001 0.001 # A polynomial -# @ccd28 F32 0.0 1.001 0.001 # A polynomial -# @ccd29 F32 0.0 1.001 0.001 # A polynomial -# @ccd30 F32 0.0 1.001 0.001 # A polynomial -# @ccd31 F32 0.0 1.001 0.001 # A polynomial -# @ccd32 F32 0.0 1.001 0.001 # A polynomial -# @ccd33 F32 0.0 1.001 0.001 # A polynomial -# @ccd34 F32 0.0 1.001 0.001 # A polynomial -# @ccd35 F32 0.0 1.001 0.001 # A polynomial -# @ccd36 F32 0.0 1.001 0.001 # A polynomial -#END - -# Overscan subtraction -OVERSCAN.SINGLE BOOL FALSE # Reduce overscan to a single value? -#OVERSCAN.FIT STR SPLINE # NONE | POLYNOMIAL | SPLINE -OVERSCAN.FIT STR POLYNOMIAL # NONE | POLYNOMIAL | SPLINE -OVERSCAN.ORDER S32 5 # Order of polynomial fit -OVERSCAN.STAT STR MEAN # MEAN | MEDIAN - -# binned output image options -BIN1.XBIN S32 8 -BIN1.YBIN S32 8 -BIN2.XBIN S32 64 -BIN2.YBIN S32 64 - -PHOTCODE.RULE STR {CAMERA}.{FILTER.ID}.{CHIP.N} Index: unk/ippconfig/ucam_mosaic/ppImage_ob.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/ppImage_ob.config (revision 11590) +++ (revision ) @@ -1,82 +1,0 @@ -### Phase 2 recipe configuration file - -# List of tasks to perform -MASK BOOL FALSE # Mask bad pixels -MASK.VALUE U8 0x10 # only mask pixels matching this bitmask -NONLIN BOOL FALSE # Non-linearity correction -OVERSCAN BOOL TRUE # Overscan subtraction -BIAS BOOL TRUE # Bias subtraction -DARK BOOL FALSE # Dark subtraction -FLAT BOOL FALSE # Flat-field normalisation -FRINGE BOOL FALSE # Fringe subtraction -PHOTOM BOOL FALSE # Source identification and photometry -ASTROM.CHIP BOOL FALSE -ASTROM.MOSAIC BOOL FALSE # Astrometry - -BASE.FITS BOOL TRUE # Save base detrended image? -CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? -FPA1.FITS BOOL FALSE # Save 1st binned fpa image? -FPA2.FITS BOOL FALSE # Save 2nd binned fpa image? -BIN1.FITS BOOL FALSE # Save 1st binned chip image? -BIN2.FITS BOOL FALSE # Save 2nd binned chip image? -BIN1.JPEG BOOL FALSE # Save 1st binned jpeg? -BIN2.JPEG BOOL FALSE # Save 2nd binned jpeg? - -# Non-linearity correction -NONLIN.SOURCE STR CHIP.NAME # How to determine the source -#@NONLIN.DATA F32 0.0 1.001 0.001 # A polynomial -NONLIN.DATA STR nonlin.dat # Filename for lookup table -#NONLIN.DATA METADATA # Source of non-linearity data -# ccd00 STR nonlin00.dat # A lookup table -# @ccd01 F32 0.0 1.001 0.001 # A polynomial -# @ccd02 F32 0.0 1.001 0.001 # A polynomial -# @ccd03 F32 1.2345 # A polynomial -# @ccd04 F32 0.0 1.001 0.001 # A polynomial -# @ccd05 F32 0.0 1.001 0.001 # A polynomial -# @ccd06 F32 0.0 1.001 0.001 # A polynomial -# @ccd07 F32 0.0 1.001 0.001 # A polynomial -# @ccd08 F32 0.0 1.001 0.001 # A polynomial -# @ccd09 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd11 F32 0.0 1.001 0.001 # A polynomial -# @ccd12 F32 0.0 1.001 0.001 # A polynomial -# @ccd13 F32 0.0 1.001 0.001 # A polynomial -# @ccd14 F32 0.0 1.001 0.001 # A polynomial -# @ccd15 F32 0.0 1.001 0.001 # A polynomial -# @ccd16 F32 0.0 1.001 0.001 # A polynomial -# @ccd17 F32 0.0 1.001 0.001 # A polynomial -# @ccd18 F32 0.0 1.001 0.001 # A polynomial -# @ccd19 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd21 F32 0.0 1.001 0.001 # A polynomial -# @ccd22 F32 0.0 1.001 0.001 # A polynomial -# @ccd23 F32 0.0 1.001 0.001 # A polynomial -# @ccd24 F32 0.0 1.001 0.001 # A polynomial -# @ccd25 F32 0.0 1.001 0.001 # A polynomial -# @ccd26 F32 0.0 1.001 0.001 # A polynomial -# @ccd27 F32 0.0 1.001 0.001 # A polynomial -# @ccd28 F32 0.0 1.001 0.001 # A polynomial -# @ccd29 F32 0.0 1.001 0.001 # A polynomial -# @ccd30 F32 0.0 1.001 0.001 # A polynomial -# @ccd31 F32 0.0 1.001 0.001 # A polynomial -# @ccd32 F32 0.0 1.001 0.001 # A polynomial -# @ccd33 F32 0.0 1.001 0.001 # A polynomial -# @ccd34 F32 0.0 1.001 0.001 # A polynomial -# @ccd35 F32 0.0 1.001 0.001 # A polynomial -# @ccd36 F32 0.0 1.001 0.001 # A polynomial -#END - -# Overscan subtraction -OVERSCAN.SINGLE BOOL FALSE # Reduce overscan to a single value? -#OVERSCAN.FIT STR SPLINE # NONE | POLYNOMIAL | SPLINE -OVERSCAN.FIT STR POLYNOMIAL # NONE | POLYNOMIAL | SPLINE -OVERSCAN.ORDER S32 5 # Order of polynomial fit -OVERSCAN.STAT STR MEAN # MEAN | MEDIAN - -# binned output image options -BIN1.XBIN S32 8 -BIN1.YBIN S32 8 -BIN2.XBIN S32 64 -BIN2.YBIN S32 64 - -PHOTCODE.RULE STR {CAMERA}.{FILTER.ID}.{CHIP.N} Index: unk/ippconfig/ucam_mosaic/ppImage_obd.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/ppImage_obd.config (revision 11590) +++ (revision ) @@ -1,82 +1,0 @@ -### Phase 2 recipe configuration file - -# List of tasks to perform -MASK BOOL FALSE # Mask bad pixels -MASK.VALUE U8 0x10 # only mask pixels matching this bitmask -NONLIN BOOL FALSE # Non-linearity correction -OVERSCAN BOOL TRUE # Overscan subtraction -BIAS BOOL TRUE # Bias subtraction -DARK BOOL FALSE # Dark subtraction -FLAT BOOL FALSE # Flat-field normalisation -FRINGE BOOL FALSE # Fringe subtraction -PHOTOM BOOL FALSE # Source identification and photometry -ASTROM.CHIP BOOL FALSE -ASTROM.MOSAIC BOOL FALSE # Astrometry - -BASE.FITS BOOL TRUE # Save base detrended image? -CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? -FPA1.FITS BOOL FALSE # Save 1st binned fpa image? -FPA2.FITS BOOL FALSE # Save 2nd binned fpa image? -BIN1.FITS BOOL FALSE # Save 1st binned chip image? -BIN2.FITS BOOL FALSE # Save 2nd binned chip image? -BIN1.JPEG BOOL FALSE # Save 1st binned jpeg? -BIN2.JPEG BOOL FALSE # Save 2nd binned jpeg? - -# Non-linearity correction -NONLIN.SOURCE STR CHIP.NAME # How to determine the source -#@NONLIN.DATA F32 0.0 1.001 0.001 # A polynomial -NONLIN.DATA STR nonlin.dat # Filename for lookup table -#NONLIN.DATA METADATA # Source of non-linearity data -# ccd00 STR nonlin00.dat # A lookup table -# @ccd01 F32 0.0 1.001 0.001 # A polynomial -# @ccd02 F32 0.0 1.001 0.001 # A polynomial -# @ccd03 F32 1.2345 # A polynomial -# @ccd04 F32 0.0 1.001 0.001 # A polynomial -# @ccd05 F32 0.0 1.001 0.001 # A polynomial -# @ccd06 F32 0.0 1.001 0.001 # A polynomial -# @ccd07 F32 0.0 1.001 0.001 # A polynomial -# @ccd08 F32 0.0 1.001 0.001 # A polynomial -# @ccd09 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd11 F32 0.0 1.001 0.001 # A polynomial -# @ccd12 F32 0.0 1.001 0.001 # A polynomial -# @ccd13 F32 0.0 1.001 0.001 # A polynomial -# @ccd14 F32 0.0 1.001 0.001 # A polynomial -# @ccd15 F32 0.0 1.001 0.001 # A polynomial -# @ccd16 F32 0.0 1.001 0.001 # A polynomial -# @ccd17 F32 0.0 1.001 0.001 # A polynomial -# @ccd18 F32 0.0 1.001 0.001 # A polynomial -# @ccd19 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd21 F32 0.0 1.001 0.001 # A polynomial -# @ccd22 F32 0.0 1.001 0.001 # A polynomial -# @ccd23 F32 0.0 1.001 0.001 # A polynomial -# @ccd24 F32 0.0 1.001 0.001 # A polynomial -# @ccd25 F32 0.0 1.001 0.001 # A polynomial -# @ccd26 F32 0.0 1.001 0.001 # A polynomial -# @ccd27 F32 0.0 1.001 0.001 # A polynomial -# @ccd28 F32 0.0 1.001 0.001 # A polynomial -# @ccd29 F32 0.0 1.001 0.001 # A polynomial -# @ccd30 F32 0.0 1.001 0.001 # A polynomial -# @ccd31 F32 0.0 1.001 0.001 # A polynomial -# @ccd32 F32 0.0 1.001 0.001 # A polynomial -# @ccd33 F32 0.0 1.001 0.001 # A polynomial -# @ccd34 F32 0.0 1.001 0.001 # A polynomial -# @ccd35 F32 0.0 1.001 0.001 # A polynomial -# @ccd36 F32 0.0 1.001 0.001 # A polynomial -#END - -# Overscan subtraction -OVERSCAN.SINGLE BOOL FALSE # Reduce overscan to a single value? -#OVERSCAN.FIT STR SPLINE # NONE | POLYNOMIAL | SPLINE -OVERSCAN.FIT STR POLYNOMIAL # NONE | POLYNOMIAL | SPLINE -OVERSCAN.ORDER S32 5 # Order of polynomial fit -OVERSCAN.STAT STR MEAN # MEAN | MEDIAN - -# binned output image options -BIN1.XBIN S32 8 -BIN1.YBIN S32 8 -BIN2.XBIN S32 64 -BIN2.YBIN S32 64 - -PHOTCODE.RULE STR {CAMERA}.{FILTER.ID}.{CHIP.N} Index: unk/ippconfig/ucam_mosaic/ppImage_obdf.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/ppImage_obdf.config (revision 11590) +++ (revision ) @@ -1,82 +1,0 @@ -### Phase 2 recipe configuration file - -# List of tasks to perform -MASK BOOL FALSE # Mask bad pixels -MASK.VALUE U8 0x10 # only mask pixels matching this bitmask -NONLIN BOOL FALSE # Non-linearity correction -OVERSCAN BOOL TRUE # Overscan subtraction -BIAS BOOL TRUE # Bias subtraction -DARK BOOL TRUE # Dark subtraction -FLAT BOOL TRUE # Flat-field normalisation -FRINGE BOOL FALSE # Fringe subtraction -PHOTOM BOOL FALSE # Source identification and photometry -ASTROM.CHIP BOOL FALSE -ASTROM.MOSAIC BOOL FALSE # Astrometry - -BASE.FITS BOOL TRUE # Save base detrended image? -CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? -FPA1.FITS BOOL FALSE # Save 1st binned fpa image? -FPA2.FITS BOOL FALSE # Save 2nd binned fpa image? -BIN1.FITS BOOL FALSE # Save 1st binned chip image? -BIN2.FITS BOOL FALSE # Save 2nd binned chip image? -BIN1.JPEG BOOL TRUE # Save 1st binned jpeg? -BIN2.JPEG BOOL TRUE # Save 2nd binned jpeg? - -# Non-linearity correction -NONLIN.SOURCE STR CHIP.NAME # How to determine the source -#@NONLIN.DATA F32 0.0 1.001 0.001 # A polynomial -NONLIN.DATA STR nonlin.dat # Filename for lookup table -#NONLIN.DATA METADATA # Source of non-linearity data -# ccd00 STR nonlin00.dat # A lookup table -# @ccd01 F32 0.0 1.001 0.001 # A polynomial -# @ccd02 F32 0.0 1.001 0.001 # A polynomial -# @ccd03 F32 1.2345 # A polynomial -# @ccd04 F32 0.0 1.001 0.001 # A polynomial -# @ccd05 F32 0.0 1.001 0.001 # A polynomial -# @ccd06 F32 0.0 1.001 0.001 # A polynomial -# @ccd07 F32 0.0 1.001 0.001 # A polynomial -# @ccd08 F32 0.0 1.001 0.001 # A polynomial -# @ccd09 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd11 F32 0.0 1.001 0.001 # A polynomial -# @ccd12 F32 0.0 1.001 0.001 # A polynomial -# @ccd13 F32 0.0 1.001 0.001 # A polynomial -# @ccd14 F32 0.0 1.001 0.001 # A polynomial -# @ccd15 F32 0.0 1.001 0.001 # A polynomial -# @ccd16 F32 0.0 1.001 0.001 # A polynomial -# @ccd17 F32 0.0 1.001 0.001 # A polynomial -# @ccd18 F32 0.0 1.001 0.001 # A polynomial -# @ccd19 F32 0.0 1.001 0.001 # A polynomial -# @ccd10 F32 0.0 1.001 0.001 # A polynomial -# @ccd21 F32 0.0 1.001 0.001 # A polynomial -# @ccd22 F32 0.0 1.001 0.001 # A polynomial -# @ccd23 F32 0.0 1.001 0.001 # A polynomial -# @ccd24 F32 0.0 1.001 0.001 # A polynomial -# @ccd25 F32 0.0 1.001 0.001 # A polynomial -# @ccd26 F32 0.0 1.001 0.001 # A polynomial -# @ccd27 F32 0.0 1.001 0.001 # A polynomial -# @ccd28 F32 0.0 1.001 0.001 # A polynomial -# @ccd29 F32 0.0 1.001 0.001 # A polynomial -# @ccd30 F32 0.0 1.001 0.001 # A polynomial -# @ccd31 F32 0.0 1.001 0.001 # A polynomial -# @ccd32 F32 0.0 1.001 0.001 # A polynomial -# @ccd33 F32 0.0 1.001 0.001 # A polynomial -# @ccd34 F32 0.0 1.001 0.001 # A polynomial -# @ccd35 F32 0.0 1.001 0.001 # A polynomial -# @ccd36 F32 0.0 1.001 0.001 # A polynomial -#END - -# Overscan subtraction -OVERSCAN.SINGLE BOOL FALSE # Reduce overscan to a single value? -#OVERSCAN.FIT STR SPLINE # NONE | POLYNOMIAL | SPLINE -OVERSCAN.FIT STR POLYNOMIAL # NONE | POLYNOMIAL | SPLINE -OVERSCAN.ORDER S32 5 # Order of polynomial fit -OVERSCAN.STAT STR MEAN # MEAN | MEDIAN - -# binned output image options -BIN1.XBIN S32 8 -BIN1.YBIN S32 8 -BIN2.XBIN S32 64 -BIN2.YBIN S32 64 - -PHOTCODE.RULE STR {CAMERA}.{FILTER.ID}.{CHIP.N} Index: unk/ippconfig/ucam_mosaic/ppMerge_bias.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/ppMerge_bias.config (revision 11590) +++ (revision ) @@ -1,14 +1,0 @@ -# Recipe configuration for ppMerge - -ROWS S32 128 # Number of rows to read at once -ELECTRONS F32 100.0 # Minimum number of electrons for useful signal -SAMPLE S32 100 # Sampling factor for measuring the background -REJ F32 3.0 # Rejection threshold (sigma) -ITER S32 1 # Number of rejection iterations -FRACHIGH F32 0.3 # Fraction of high pixels to reject immediately -FRACLOW F32 0.1 # Fraction of low pixels to reject immediately -NKEEP S32 5 # Minimum number of pixels in stack to keep -MASKVAL S32 0xff # Mask value for input data -### Statistics options: MEAN | MEDIAN | ROBUST | FITTED | CLIPPED -COMBINE STR MEAN # Statistic to use for combination: -BACKGROUND STR MEDIAN # Statistic to use to measure the background Index: unk/ippconfig/ucam_mosaic/ppMerge_dark.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/ppMerge_dark.config (revision 11590) +++ (revision ) @@ -1,14 +1,0 @@ -# Recipe configuration for ppMerge - -ROWS S32 128 # Number of rows to read at once -ELECTRONS F32 100.0 # Minimum number of electrons for useful signal -SAMPLE S32 100 # Sampling factor for measuring the background -REJ F32 3.0 # Rejection threshold (sigma) -ITER S32 1 # Number of rejection iterations -FRACHIGH F32 0.3 # Fraction of high pixels to reject immediately -FRACLOW F32 0.1 # Fraction of low pixels to reject immediately -NKEEP S32 5 # Minimum number of pixels in stack to keep -MASKVAL S32 0xff # Mask value for input data -### Statistics options: MEAN | MEDIAN | ROBUST | FITTED | CLIPPED -COMBINE STR MEAN # Statistic to use for combination: -BACKGROUND STR MEDIAN # Statistic to use to measure the background Index: unk/ippconfig/ucam_mosaic/ppMerge_flat.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/ppMerge_flat.config (revision 11590) +++ (revision ) @@ -1,14 +1,0 @@ -# Recipe configuration for ppMerge - -ROWS S32 128 # Number of rows to read at once -ELECTRONS F32 100.0 # Minimum number of electrons for useful signal -SAMPLE S32 100 # Sampling factor for measuring the background -REJ F32 3.0 # Rejection threshold (sigma) -ITER S32 1 # Number of rejection iterations -FRACHIGH F32 0.3 # Fraction of high pixels to reject immediately -FRACLOW F32 0.1 # Fraction of low pixels to reject immediately -NKEEP S32 5 # Minimum number of pixels in stack to keep -MASKVAL S32 0xff # Mask value for input data -### Statistics options: MEAN | MEDIAN | ROBUST | FITTED | CLIPPED -COMBINE STR MEAN # Statistic to use for combination: -BACKGROUND STR MEDIAN # Statistic to use to measure the background Index: unk/ippconfig/ucam_mosaic/ppStats.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/ppStats.config (revision 11590) +++ (revision ) @@ -1,12 +1,0 @@ -### ppStats recipe -SAMPLE F32 0.1 # Fraction of cell to sample -MASKVAL U8 0xff # Mask value to use for statistics - -# Define the outputs as MULTI -HEADER MULTI -CONCEPT MULTI -STAT MULTI - -# Values to return -STAT STR ROBUST_MEDIAN # Background estimator -STAT STR ROBUST_STDEV # Background standard deviation estimator Index: unk/ippconfig/ucam_mosaic/psastro.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/psastro.config (revision 11590) +++ (revision ) @@ -1,36 +1,0 @@ - -# astrometry matching parameters - -# nominal plate scale (microns / pixel) -# PSASTRO.PLATE.SCALE F32 13.5 -PSASTRO.PLATE.SCALE F32 1.0 - -# pmAstromGridMatch: -PSASTRO.GRID.MIN.ANGLE F32 -0.0851 -PSASTRO.GRID.MAX.ANGLE F32 +0.0851 -PSASTRO.GRID.DEL.ANGLE F32 0.0170 - -# pmAstromGridAngle -# max grid offset in FP units (microns) -# use plate-scale to make this in pixels? -# PSASTRO.GRID.OFFSET F32 10000. -# PSASTRO.GRID.SCALE F32 500. -PSASTRO.GRID.OFFSET F32 1000. -PSASTRO.GRID.SCALE F32 50 - -# these tweak are in FP units (pixels, currently) -PSASTRO.TWEAK.SCALE F32 1 -PSASTRO.TWEAK.RANGE F32 75 -PSASTRO.TWEAK.SMOOTH F32 2 -PSASTRO.TWEAK.NSIGMA F32 3 - -# pmAstromRadiusMatch -# use plate-scale to make this in pixels? -PSASTRO.MATCH.RADIUS F32 8 - -# pmAstromMatchFit -PSASTRO.CHIP.NX S32 1 # fit order -PSASTRO.CHIP.NY S32 1 # fit order -PSASTRO.CHIP.NITER S32 3 # fit clipping iterations -PSASTRO.CHIP.NSIGMA F32 3 # fit clipping sigmas - Index: unk/ippconfig/ucam_mosaic/psphot.config =================================================================== --- /trunk/ippconfig/ucam_mosaic/psphot.config (revision 11590) +++ (revision ) @@ -1,84 +1,0 @@ - -#SAVE.BACKMDL BOOL TRUE -#SAVE.BACKGND BOOL TRUE -#SAVE.BACKSUB BOOL TRUE -#SAVE.RESID BOOL TRUE -#SAVE.PSF BOOL TRUE -#LOAD.PSF BOOL FALSE - -# image noise parameters -RDNOISE STR HD:RDNOISE # read-noise in electrons -GAIN STR HD:GAIN # electrons / DN -ZERO_POINT F32 25.000 # zero point used by DVO - -# background model : -BACKGROUND.XBIN S32 128 -BACKGROUND.YBIN S32 128 - -# masking parameters -XMIN F32 2 # minimum valid x-coord -XMAX F32 -2 # maximum valid x-coord -YMIN F32 2 # minimum valid y-coord -YMAX F32 -2 # maximum valid y-coord -SATURATION F32 50000 # saturation level on this chip -MIN_VALID_PIXEL F32 1 # saturation level on this chip - -# image statistics parameters -IMSTATS_NPIX S32 1000 # number of pixels to use for sky estimate boxes: - -# peak finding -PEAKS_SMOOTH_SIGMA F32 1.0 # smoothing kernel sigma in pixels -PEAKS_SMOOTH_NSIGMA F32 3.0 # smoothing kernel width in sigmas -# PEAKS_NSIGMA_LIMIT F32 10.0 # peak significance threshold -PEAKS_NSIGMA_LIMIT F32 25.0 # peak significance threshold - -# basic object statistics -SKY_INNER_RADIUS F32 15 # square annulus for local sky measurement -SKY_OUTER_RADIUS F32 25 # square annulus for local sky measurement -PSF_MOMENTS_RADIUS F32 3 # calculate initial source moments with this radius -PSF_SN_LIM F32 100 # minimum S/N for stars used for PSF model -PSF_MAX_NSTARS S32 300 # limit number of stars used for PSF model - -# PSF model parameters : choose the PSF model -# list as many PSF_MODEL options as desired -# PSF_MODEL MULTI -PSF_MODEL STR PS_MODEL_QGAUSS -# PSF_MODEL STR PS_MODEL_GAUSS -# PSF_MODEL STR PS_MODEL_PGAUSS -# PSF_MODEL STR PS_MODEL_TGAUSS ## not well tested, not very successful - -MOMENTS_SCALE F32 0.1 -MOMENTS_SN_MIN F32 30.0 -MOMENTS_SX_MAX F32 3.0 -MOMENTS_SY_MAX F32 3.0 -MOMENTS_AR_MAX F32 1.5 # maximum axial ratio: 1 / AR < (sx / sy) < AR - -PSF_FIT_RADIUS F32 15.0 # fitting radius for test PSF model -PSF_REF_RADIUS F32 25.0 # aperture magnitudes are scaled via - -# PSF-like source model parameters -PSF_FIT_NSIGMA F32 1.0 # significance for pixel included in fit -PSF_FIT_PADDING F32 5.0 # extra annulus to use for fit -PSF_SHAPE_NSIGMA F32 3.0 # max significance for shape variation -PSF_MIN_SN F32 2.0 # reject objects below this significance -PSF_MAX_CHI F32 50.0 # reject objects worse that this - -# EXTended source model parameters -EXT_MODEL STR PS_MODEL_PGAUSS -EXT_MIN_SN F32 50.0 # fit galaxies above this S/N limit -EXT_FIT_NSIGMA F32 1 # significance for pixel included in fit -EXT_FIT_PADDING F32 5 # extra annulus to use for fit -EXT_MOMENTS_RADIUS F32 9 - -FITMODE STR BLEND -DEBLEND_PEAK_FRACTION F32 0.1 -DEBLEND_SKY_NSIGMA F32 10.0 - -APTREND STR SKYSAT -FULL_FIT_SN_LIM F32 50.0 -AP_MIN_SN F32 50.0 - -# BREAK_POINT STR PEAKS -# PEAKS_OUTPUT_FILE STR peaks.dat -# MOMENTS_OUTPUT_FILE STR moments.dat -# ANALYSIS_REGION STR [1000:1600,2800:3400]