Index: /trunk/ippconfig/cfh12k/camera.config =================================================================== --- /trunk/ippconfig/cfh12k/camera.config (revision 13629) +++ /trunk/ippconfig/cfh12k/camera.config (revision 13630) @@ -92,36 +92,6 @@ END - # Rejection levels for detrend creation -REJECTION METADATA - TYPE LIMITS FILTER EXPECTED IMFILE.MEAN IMFILE.STDEV EXP.MEAN EXP.STDEV EXP.MEANSTDEV ENSEMBLE.MEAN ENSEMBLE.STDEV ENSEMBLE.MEANSTDEV IMFILE.SN EXP.SN - FLAT MULTI - - BIAS LIMITS * 0 1 5 0.5 3 0.5 3 3 0 0 0 - DARK LIMITS * 0 1 5 0.5 3 0.5 3 3 0 0 0 - FLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS u 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS g 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS r 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS i 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS z 0 0 0 0 0 0 0 0 3 0 0 - FRINGE LIMITS * 0 0 0 0 0 0 0 0 0 0 0 - -# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything -# EXPECTED is the expected mean value -# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation -# IMFILE.STDEV is the maximum permitted standard deviation for an imfile -# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation -# EXP.STDEV is the maximum permitted standard deviation for an exposure -# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean -# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures -# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures -# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures -# IMFILE.SN is the minimum permitted signal-to-noise for an imfile -# EXP.SN is the minimum permitted signal-to-noise for an exposure -# These values (all except FILTER) may be zero, in which case no clipping is applied. - -END - +REJECTIONS STR cfh12k/rejections.config FILERULES METADATA Index: /trunk/ippconfig/cfh12k/rejections.config =================================================================== --- /trunk/ippconfig/cfh12k/rejections.config (revision 13630) +++ /trunk/ippconfig/cfh12k/rejections.config (revision 13630) @@ -0,0 +1,104 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 5.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 3.0 + EXP.MEANSTDEV F32 0.5 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 3.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 5.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 3.0 + EXP.MEANSTDEV F32 0.5 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 3.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +SHUTTER METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FLAT METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 3.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /trunk/ippconfig/ctio_mosaic2/camera.config =================================================================== --- /trunk/ippconfig/ctio_mosaic2/camera.config (revision 13629) +++ /trunk/ippconfig/ctio_mosaic2/camera.config (revision 13630) @@ -50,40 +50,6 @@ END - # Rejection levels for detrend creation -REJECTION METADATA - TYPE LIMITS FILTER EXPECTED IMFILE.MEAN IMFILE.STDEV EXP.MEAN EXP.STDEV EXP.MEANSTDEV ENSEMBLE.MEAN ENSEMBLE.STDEV ENSEMBLE.MEANSTDEV IMFILE.SN EXP.SN IMFILE.MEANSTDEV - FLAT MULTI - SKYFLAT MULTI - DOMEFLAT MULTI - - BIAS LIMITS * 0 1 4 0.5 4 0 3 4 0 0 0 0.5 - DARK LIMITS * 0 1 4 0.5 4 0 3 4 0 0 0 0.5 - FLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 0 - SKYFLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 0 - DOMEFLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS u 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS g 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS r 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS i 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS z 0 0 0 0 0 0 0 0 3 0 0 0 - FRINGE LIMITS * 0 0 0 0 0 0 0 0 0 0 0 0 - -# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything -# EXPECTED is the expected mean value -# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation -# IMFILE.STDEV is the maximum permitted standard deviation for an imfile -# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation -# EXP.STDEV is the maximum permitted standard deviation for an exposure -# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean -# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures -# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures -# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures -# IMFILE.SN is the minimum permitted signal-to-noise for an imfile -# EXP.SN is the minimum permitted signal-to-noise for an exposure -# These values (all except FILTER) may be zero, in which case no clipping is applied. - -END - +REJECTIONS STR ctio_mosaic2/rejections.config FILERULES METADATA Index: /trunk/ippconfig/ctio_mosaic2/rejections.config =================================================================== --- /trunk/ippconfig/ctio_mosaic2/rejections.config (revision 13630) +++ /trunk/ippconfig/ctio_mosaic2/rejections.config (revision 13630) @@ -0,0 +1,104 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 4.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 4.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 4.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 4.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 4.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 4.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +SHUTTER METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FLAT METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 3.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /trunk/ippconfig/gpc1/camera.config =================================================================== --- /trunk/ippconfig/gpc1/camera.config (revision 13629) +++ /trunk/ippconfig/gpc1/camera.config (revision 13630) @@ -80,2 +80,6 @@ # PSPHOT STR psphot.config # psphot details END + +# Rejection levels for detrend creation +REJECTIONS STR gpc1/rejections.config + Index: /trunk/ippconfig/gpc1/rejections.config =================================================================== --- /trunk/ippconfig/gpc1/rejections.config (revision 13630) +++ /trunk/ippconfig/gpc1/rejections.config (revision 13630) @@ -0,0 +1,104 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 20.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 20.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +SHUTTER METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FLAT METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 3.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /trunk/ippconfig/isp/camera.config =================================================================== --- /trunk/ippconfig/isp/camera.config (revision 13629) +++ /trunk/ippconfig/isp/camera.config (revision 13630) @@ -50,38 +50,5 @@ # Rejection levels for detrend creation -REJECTION METADATA - TYPE LIMITS FILTER EXPECTED IMFILE.MEAN IMFILE.STDEV IMFILE.MEANSTDEV EXP.MEAN EXP.STDEV EXP.MEANSTDEV ENSEMBLE.MEAN ENSEMBLE.STDEV ENSEMBLE.MEANSTDEV IMFILE.SN EXP.SN - - BIAS LIMITS * 0 2 10 0.5 1.0 10 0.5 3 3 0 0 0 - DARK LIMITS * 0 2 10 0.5 1.0 10 0.5 3 3 0 0 0 - SHUTTER LIMITS * 0 0 0 0 0 0 0 0 0 0 0 20.0 - # need to adjust these to get a decent clipping - - FLAT MULTI - FLAT LIMITS * 0 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS u 0 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS g 0 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS r 0 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS i 0 0 0 0 0 0 0 0 0 3 0 0 -# FLAT LIMITS z 0 0 0 0 0 0 0 0 0 3 0 0 - - FRINGE LIMITS * 0 0 0 0 0 0 0 0 0 0 0 0 - -# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything -# EXPECTED is the expected mean value -# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation -# IMFILE.STDEV is the maximum permitted standard deviation for an imfile -# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation -# EXP.STDEV is the maximum permitted standard deviation for an exposure -# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean -# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures -# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures -# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures -# IMFILE.SN is the minimum permitted signal-to-noise for an imfile -# EXP.SN is the minimum permitted signal-to-noise for an exposure -# These values (all except FILTER) may be zero, in which case no clipping is applied. - -END - +REJECTIONS STR isp/rejections.config FILERULES METADATA Index: /trunk/ippconfig/isp/rejections.config =================================================================== --- /trunk/ippconfig/isp/rejections.config (revision 13630) +++ /trunk/ippconfig/isp/rejections.config (revision 13630) @@ -0,0 +1,104 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 2.0 + IMFILE.STDEV F32 10.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 1.0 + EXP.STDEV F32 10.0 + EXP.MEANSTDEV F32 0.5 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 3.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 2.0 + IMFILE.STDEV F32 10.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 1.0 + EXP.STDEV F32 10.0 + EXP.MEANSTDEV F32 0.5 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 3.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +SHUTTER METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 20.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FLAT METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 3.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /trunk/ippconfig/lris_blue/rejections.config =================================================================== --- /trunk/ippconfig/lris_blue/rejections.config (revision 13630) +++ /trunk/ippconfig/lris_blue/rejections.config (revision 13630) @@ -0,0 +1,104 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 20.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 20.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +SHUTTER METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FLAT METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 3.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /trunk/ippconfig/lris_red/rejections.config =================================================================== --- /trunk/ippconfig/lris_red/rejections.config (revision 13630) +++ /trunk/ippconfig/lris_red/rejections.config (revision 13630) @@ -0,0 +1,104 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 20.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 20.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +SHUTTER METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FLAT METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 3.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /trunk/ippconfig/mcshort/camera.config =================================================================== --- /trunk/ippconfig/mcshort/camera.config (revision 13629) +++ /trunk/ippconfig/mcshort/camera.config (revision 13630) @@ -94,38 +94,5 @@ # Rejection levels for detrend creation -REJECTION METADATA - TYPE LIMITS FILTER EXPECTED IMFILE.MEAN IMFILE.STDEV EXP.MEAN EXP.STDEV EXP.MEANSTDEV ENSEMBLE.MEAN ENSEMBLE.STDEV ENSEMBLE.MEANSTDEV IMFILE.SN EXP.SN IMFILE.MEANSTDEV - FLAT MULTI - SKYFLAT MULTI - DOMEFLAT MULTI - - BIAS LIMITS * 0 1 4 0.5 4 0 3 4 0 0 0 0.5 - DARK LIMITS * 0 1 4 0.5 4 0 3 4 0 0 0 0.5 - FLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 0 - SKYFLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 0 - DOMEFLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS u 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS g 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS r 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS i 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS z 0 0 0 0 0 0 0 0 3 0 0 0 - FRINGE LIMITS * 0 0 0 0 0 0 0 0 0 0 0 0 - -# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything -# EXPECTED is the expected mean value -# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation -# IMFILE.STDEV is the maximum permitted standard deviation for an imfile -# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation -# EXP.STDEV is the maximum permitted standard deviation for an exposure -# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean -# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures -# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures -# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures -# IMFILE.SN is the minimum permitted signal-to-noise for an imfile -# EXP.SN is the minimum permitted signal-to-noise for an exposure -# These values (all except FILTER) may be zero, in which case no clipping is applied. - -END - +REJECTIONS STR megacam/rejections.config FILERULES METADATA Index: /trunk/ippconfig/mcshort/rejections.config =================================================================== --- /trunk/ippconfig/mcshort/rejections.config (revision 13630) +++ /trunk/ippconfig/mcshort/rejections.config (revision 13630) @@ -0,0 +1,104 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 20.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 20.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +SHUTTER METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FLAT METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 3.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /trunk/ippconfig/megacam/camera.config =================================================================== --- /trunk/ippconfig/megacam/camera.config (revision 13629) +++ /trunk/ippconfig/megacam/camera.config (revision 13630) @@ -110,34 +110,5 @@ # Rejection levels for detrend creation -REJECTION METADATA - TYPE LIMITS FILTER EXPECTED IMFILE.MEAN IMFILE.STDEV EXP.MEAN EXP.STDEV EXP.MEANSTDEV ENSEMBLE.MEAN ENSEMBLE.STDEV ENSEMBLE.MEANSTDEV IMFILE.SN EXP.SN IMFILE.MEANSTDEV - FLAT MULTI - - BIAS LIMITS * 0 1 5 0.5 3 0.5 3 3 0 0 0 0 - DARK LIMITS * 0 1 5 0.5 3 0.5 3 3 0 0 0 0 - FLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS u 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS g 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS r 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS i 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS z 0 0 0 0 0 0 0 0 3 0 0 0 - FRINGE LIMITS * 0 0 0 0 0 0 0 0 0 0 0 0 - -# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything -# EXPECTED is the expected mean value -# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation -# IMFILE.STDEV is the maximum permitted standard deviation for an imfile -# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation -# EXP.STDEV is the maximum permitted standard deviation for an exposure -# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean -# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures -# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures -# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures -# IMFILE.SN is the minimum permitted signal-to-noise for an imfile -# EXP.SN is the minimum permitted signal-to-noise for an exposure -# These values (all except FILTER) may be zero, in which case no clipping is applied. - -END - +REJECTIONS STR megacam/rejections.config FILERULES METADATA Index: /trunk/ippconfig/megacam/rejections.config =================================================================== --- /trunk/ippconfig/megacam/rejections.config (revision 13630) +++ /trunk/ippconfig/megacam/rejections.config (revision 13630) @@ -0,0 +1,104 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 20.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 20.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +SHUTTER METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FLAT METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 3.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /trunk/ippconfig/simmosaic/camera.config =================================================================== --- /trunk/ippconfig/simmosaic/camera.config (revision 13629) +++ /trunk/ippconfig/simmosaic/camera.config (revision 13630) @@ -59,34 +59,5 @@ # Rejection levels for detrend creation -REJECTION METADATA - TYPE LIMITS FILTER EXPECTED IMFILE.MEAN IMFILE.STDEV EXP.MEAN EXP.STDEV EXP.MEANSTDEV ENSEMBLE.MEAN ENSEMBLE.STDEV ENSEMBLE.MEANSTDEV IMFILE.SN EXP.SN IMFILE.MEANSTDEV - FLAT MULTI - - BIAS LIMITS * 0 1 20 0.5 20 0 3 20 0 0 0 0.75 - DARK LIMITS * 0 1 0 0.5 0 0 3 20 0 0 0 0.75 - SHUTTER LIMITS * 0 0 0 0 0 0 0 0 0 0 0 0 - FLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS u 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS g 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS r 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS i 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS z 0 0 0 0 0 0 0 0 3 0 0 0 - FRINGE LIMITS * 0 0 0 0 0 0 0 0 0 0 0 0 - -# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything -# EXPECTED is the expected mean value -# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation -# IMFILE.STDEV is the maximum permitted standard deviation for an imfile -# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation -# EXP.STDEV is the maximum permitted standard deviation for an exposure -# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean -# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures -# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures -# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures -# IMFILE.SN is the minimum permitted signal-to-noise for an imfile -# EXP.SN is the minimum permitted signal-to-noise for an exposure -# These values (all except FILTER) may be zero, in which case no clipping is applied. - -END +REJECTIONS STR simmosaic/rejections.config FILERULES METADATA Index: /trunk/ippconfig/simmosaic/rejections.config =================================================================== --- /trunk/ippconfig/simmosaic/rejections.config (revision 13630) +++ /trunk/ippconfig/simmosaic/rejections.config (revision 13630) @@ -0,0 +1,104 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 20.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 20.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +SHUTTER METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FLAT METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 3.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /trunk/ippconfig/simple/camera.config =================================================================== --- /trunk/ippconfig/simple/camera.config (revision 13629) +++ /trunk/ippconfig/simple/camera.config (revision 13630) @@ -46,34 +46,6 @@ # Rejection levels for detrend creation -REJECTION METADATA - TYPE LIMITS FILTER EXPECTED IMFILE.MEAN IMFILE.STDEV EXP.MEAN EXP.STDEV EXP.MEANSTDEV ENSEMBLE.MEAN ENSEMBLE.STDEV ENSEMBLE.MEANSTDEV IMFILE.SN EXP.SN IMFILE.MEANSTDEV - FLAT MULTI +REJECTIONS STR simple/rejections.config - BIAS LIMITS * 0 1 20 0.5 20 0 3 20 0 0 0 0.5 - DARK LIMITS * 0 1 0 0.5 0 0 3 20 0 0 0 0.5 - FLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS u 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS g 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS r 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS i 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS z 0 0 0 0 0 0 0 0 3 0 0 0 - FRINGE LIMITS * 0 0 0 0 0 0 0 0 0 0 0 0 - -# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything -# EXPECTED is the expected mean value -# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation -# IMFILE.STDEV is the maximum permitted standard deviation for an imfile -# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation -# EXP.STDEV is the maximum permitted standard deviation for an exposure -# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean -# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures -# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures -# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures -# IMFILE.SN is the minimum permitted signal-to-noise for an imfile -# EXP.SN is the minimum permitted signal-to-noise for an exposure -# These values (all except FILTER) may be zero, in which case no clipping is applied. - -END - FILERULES METADATA PSASTRO.INPUT STR PSASTRO.INPUT.CMP Index: /trunk/ippconfig/simple/rejections.config =================================================================== --- /trunk/ippconfig/simple/rejections.config (revision 13630) +++ /trunk/ippconfig/simple/rejections.config (revision 13630) @@ -0,0 +1,104 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 20.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 20.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +SHUTTER METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FLAT METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 3.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /trunk/ippconfig/simtest/camera.config =================================================================== --- /trunk/ippconfig/simtest/camera.config (revision 13629) +++ /trunk/ippconfig/simtest/camera.config (revision 13630) @@ -47,34 +47,5 @@ # Rejection levels for detrend creation -REJECTION METADATA - TYPE LIMITS FILTER EXPECTED IMFILE.MEAN IMFILE.STDEV EXP.MEAN EXP.STDEV EXP.MEANSTDEV ENSEMBLE.MEAN ENSEMBLE.STDEV ENSEMBLE.MEANSTDEV IMFILE.SN EXP.SN IMFILE.MEANSTDEV - FLAT MULTI - - BIAS LIMITS * 0 1 20 0.5 20 0 3 20 0 0 0 0.5 - DARK LIMITS * 0 1 0 0.5 0 0 3 20 0 0 0 0.5 - SHUTTER LIMITS * 0 0 0 0 0 0 0 0 0 0 0 0 - FLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS u 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS g 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS r 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS i 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS z 0 0 0 0 0 0 0 0 3 0 0 0 - FRINGE LIMITS * 0 0 0 0 0 0 0 0 0 0 0 0 - -# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything -# EXPECTED is the expected mean value -# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation -# IMFILE.STDEV is the maximum permitted standard deviation for an imfile -# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation -# EXP.STDEV is the maximum permitted standard deviation for an exposure -# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean -# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures -# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures -# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures -# IMFILE.SN is the minimum permitted signal-to-noise for an imfile -# EXP.SN is the minimum permitted signal-to-noise for an exposure -# These values (all except FILTER) may be zero, in which case no clipping is applied. - -END +REJECTIONS STR simtest/rejections.config FILERULES METADATA Index: /trunk/ippconfig/simtest/rejections.config =================================================================== --- /trunk/ippconfig/simtest/rejections.config (revision 13630) +++ /trunk/ippconfig/simtest/rejections.config (revision 13630) @@ -0,0 +1,104 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 20.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 20.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +SHUTTER METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FLAT METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 3.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /trunk/ippconfig/tc3/camera.config =================================================================== --- /trunk/ippconfig/tc3/camera.config (revision 13629) +++ /trunk/ippconfig/tc3/camera.config (revision 13630) @@ -65,32 +65,6 @@ END - # Rejection levels for detrend creation -REJECTION METADATA - TYPE LIMITS FILTER EXPECTED IMFILE.MEAN IMFILE.STDEV EXP.MEAN EXP.STDEV EXP.MEANSTDEV ENSEMBLE.MEAN ENSEMBLE.STDEV ENSEMBLE.MEANSTDEV IMFILE.SN EXP.SN IMFILE.MEANSTDEV - FLAT MULTI - - BIAS LIMITS * 0 1 0 0.5 0 0 3 3 0 0 0 0 - DARK LIMITS * 0 1 0 0.5 0 0 3 3 0 0 0 0 - FLAT LIMITS * 0 0 0 0 0 0 0 0 3 0 0 0 -# FLAT LIMITS u 0 0 0 0 0 0 0 0 3 0 0 0 - FRINGE LIMITS * 0 0 0 0 0 0 0 0 0 0 0 0 - -# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything -# EXPECTED is the expected mean value -# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation -# IMFILE.STDEV is the maximum permitted standard deviation for an imfile -# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation -# EXP.STDEV is the maximum permitted standard deviation for an exposure -# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean -# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures -# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures -# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures -# IMFILE.SN is the minimum permitted signal-to-noise for an imfile -# EXP.SN is the minimum permitted signal-to-noise for an exposure -# These values (all except FILTER) may be zero, in which case no clipping is applied. - -END - +REJECTIONS STR tc3/rejections.config FILERULES METADATA Index: /trunk/ippconfig/tc3/rejections.config =================================================================== --- /trunk/ippconfig/tc3/rejections.config (revision 13630) +++ /trunk/ippconfig/tc3/rejections.config (revision 13630) @@ -0,0 +1,104 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 20.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 20.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +SHUTTER METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FLAT METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 3.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /trunk/ippconfig/ucam/camera.config =================================================================== --- /trunk/ippconfig/ucam/camera.config (revision 13629) +++ /trunk/ippconfig/ucam/camera.config (revision 13630) @@ -66,22 +66,9 @@ RECIPES METADATA # Recipes for ppImage - PPIMAGE STR ucam/ppImage.config # Default: all (normal) options on - PPIMAGE_O STR ucam/ppImage_o.config # Overscan only - PPIMAGE_OB STR ucam/ppImage_ob.config # Overscan, bias only - PPIMAGE_OBD STR ucam/ppImage_obd.config # Overscan, bias, dark only - PPIMAGE_OBDF STR ucam/ppImage_obdf.config # Overscan, bias, dark, flat only - PPIMAGE_B STR ucam/ppImage_b.config # Bias only - PPIMAGE_D STR ucam/ppImage_d.config # Dark only - PPIMAGE_F STR ucam/ppImage_f.config # Flat only - PPIMAGE_J STR ucam/ppImage_j.config # JPEG only + # PPIMAGE STR ucam/ppImage.config # Default: all (normal) options on +END - # Recipes for ppMerge - PPMERGE_BIAS STR ucam/ppMerge_bias.config - # Other recipes - PPMERGE STR ppMerge_template.config # ppMerge recipe - PSPHOT STR ucam/psphot.config # psphot details - PSASTRO STR ucam/psastro.config # psastro details - PPSTATS STR ucam/ppStats.config # ppStats recipe -END +# Rejection levels for detrend creation +REJECTIONS STR ucam/rejections.config FILERULES METADATA Index: /trunk/ippconfig/ucam/rejections.config =================================================================== --- /trunk/ippconfig/ucam/rejections.config (revision 13630) +++ /trunk/ippconfig/ucam/rejections.config (revision 13630) @@ -0,0 +1,104 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 20.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 20.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 1.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.5 + EXP.MEAN F32 0.5 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 20.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +SHUTTER METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FLAT METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 3.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.SN F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SN is the minimum permitted signal-to-noise for an imfile +# EXP.SN is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied.