Index: /trunk/ippconfig/cfh12k/camera.config
===================================================================
--- /trunk/ippconfig/cfh12k/camera.config	(revision 16187)
+++ /trunk/ippconfig/cfh12k/camera.config	(revision 16188)
@@ -181,4 +181,74 @@
 END
 
+FITS    METADATA
+# BITPIX is the bits per pixel for writing the output data
+# COMP = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ] are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE [0..16] is the number of "noise bits" to preserve when quantising floating point data; 16 for no loss
+# HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
+END
+
 FILERULES METADATA
    ### Redirections
Index: /trunk/ippconfig/ctio_mosaic2/camera.config
===================================================================
--- /trunk/ippconfig/ctio_mosaic2/camera.config	(revision 16187)
+++ /trunk/ippconfig/ctio_mosaic2/camera.config	(revision 16188)
@@ -132,4 +132,74 @@
 END
 
+FITS    METADATA
+# BITPIX is the bits per pixel for writing the output data
+# COMP = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ] are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE [0..16] is the number of "noise bits" to preserve when quantising floating point data; 16 for no loss
+# HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
+END
+
 FILERULES METADATA
    ### Redirections
Index: /trunk/ippconfig/esowfi/camera.config
===================================================================
--- /trunk/ippconfig/esowfi/camera.config	(revision 16187)
+++ /trunk/ippconfig/esowfi/camera.config	(revision 16188)
@@ -147,4 +147,74 @@
 END
 
+FITS    METADATA
+# BITPIX is the bits per pixel for writing the output data
+# COMP = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ] are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE [0..16] is the number of "noise bits" to preserve when quantising floating point data; 16 for no loss
+# HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
+END
+
 FILERULES METADATA
    ### Redirections
Index: /trunk/ippconfig/gpc1/camera.config
===================================================================
--- /trunk/ippconfig/gpc1/camera.config	(revision 16187)
+++ /trunk/ippconfig/gpc1/camera.config	(revision 16188)
@@ -186,12 +186,65 @@
 # HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
 # HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
-        TYPE            FITS    FLOAT	BITPIX  COMP     TILE.X  TILE.Y  TILE.Z  NOISE   HSCALE  HSMOOTH
-        DET_IMAGE       FITS    NONE	-32     RICE     0       1       1       16      0       0
-#       DET_MASK        FITS    NONE	8       PLIO     0       1       1       0       0       0
-        DET_MASK        FITS    NONE	8       NONE     0       1       1       0       0       0
-        DET_WEIGHT      FITS    NONE	-32     RICE     0       1       1       16      0       0
-        SKY_IMAGE       FITS    NONE	-32     RICE     0       1       1       16      0       0
-        SKY_MASK        FITS    NONE	8       PLIO     0       1       1       0       0       0
-        SKY_WEIGHT      FITS    NONE	-32     RICE     0       1       1       16      0       0
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
 END
 
Index: /trunk/ippconfig/isp/camera.config
===================================================================
--- /trunk/ippconfig/isp/camera.config	(revision 16187)
+++ /trunk/ippconfig/isp/camera.config	(revision 16188)
@@ -120,4 +120,74 @@
 END
 
+FITS    METADATA
+# BITPIX is the bits per pixel for writing the output data
+# COMP = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ] are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE [0..16] is the number of "noise bits" to preserve when quantising floating point data; 16 for no loss
+# HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
+END
+
 FILERULES METADATA
    PSASTRO.INPUT       STR PSASTRO.INPUT.CMF
Index: /trunk/ippconfig/mcshort/camera.config
===================================================================
--- /trunk/ippconfig/mcshort/camera.config	(revision 16187)
+++ /trunk/ippconfig/mcshort/camera.config	(revision 16188)
@@ -96,4 +96,74 @@
 
 
+FITS    METADATA
+# BITPIX is the bits per pixel for writing the output data
+# COMP = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ] are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE [0..16] is the number of "noise bits" to preserve when quantising floating point data; 16 for no loss
+# HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
+END
+
 FILERULES METADATA
    ### Redirections
Index: /trunk/ippconfig/megacam/camera.config
===================================================================
--- /trunk/ippconfig/megacam/camera.config	(revision 16187)
+++ /trunk/ippconfig/megacam/camera.config	(revision 16188)
@@ -217,11 +217,65 @@
 # HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
 # HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
-        TYPE            FITS    FLOAT	BITPIX  COMP     TILE.X  TILE.Y  TILE.Z  NOISE   HSCALE  HSMOOTH
-        DET_IMAGE       FITS    NONE	-32     RICE     0       1       1       16      0       0
-        DET_MASK        FITS    NONE	8       PLIO     0       1       1       0       0       0
-        DET_WEIGHT      FITS    NONE	-32     RICE     0       1       1       16      0       0
-        SKY_IMAGE       FITS    NONE	-32     RICE     0       1       1       16      0       0
-        SKY_MASK        FITS    NONE	8       PLIO     0       1       1       0       0       0
-        SKY_WEIGHT      FITS    NONE	-32     RICE     0       1       1       16      0       0
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
 END
 
Index: /trunk/ippconfig/sdss/camera.config
===================================================================
--- /trunk/ippconfig/sdss/camera.config	(revision 16187)
+++ /trunk/ippconfig/sdss/camera.config	(revision 16188)
@@ -60,4 +60,74 @@
  		JPEG_BIN2       STR     PPIMAGE_J2
 	END
+END
+
+FITS    METADATA
+# BITPIX is the bits per pixel for writing the output data
+# COMP = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ] are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE [0..16] is the number of "noise bits" to preserve when quantising floating point data; 16 for no loss
+# HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
 END
 
Index: /trunk/ippconfig/simmosaic/camera.config
===================================================================
--- /trunk/ippconfig/simmosaic/camera.config	(revision 16187)
+++ /trunk/ippconfig/simmosaic/camera.config	(revision 16188)
@@ -141,4 +141,74 @@
 END
 
+FITS    METADATA
+# BITPIX is the bits per pixel for writing the output data
+# COMP = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ] are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE [0..16] is the number of "noise bits" to preserve when quantising floating point data; 16 for no loss
+# HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
+END
+
 FILERULES METADATA
    ### Redirections
Index: /trunk/ippconfig/simple/camera.config
===================================================================
--- /trunk/ippconfig/simple/camera.config	(revision 16187)
+++ /trunk/ippconfig/simple/camera.config	(revision 16188)
@@ -76,4 +76,74 @@
 END
 
+FITS    METADATA
+# BITPIX is the bits per pixel for writing the output data
+# COMP = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ] are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE [0..16] is the number of "noise bits" to preserve when quantising floating point data; 16 for no loss
+# HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
+END
+
 FILERULES STR simple/filerules.mdc
 
Index: /trunk/ippconfig/simtest/camera.config
===================================================================
--- /trunk/ippconfig/simtest/camera.config	(revision 16187)
+++ /trunk/ippconfig/simtest/camera.config	(revision 16188)
@@ -136,5 +136,4 @@
 
 FITS    METADATA
-# FLOAT is the name of a custom floating-point scheme, or NONE
 # BITPIX is the bits per pixel for writing the output data
 # COMP = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
@@ -143,11 +142,65 @@
 # HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
 # HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
-        TYPE            FITS    FLOAT	BITPIX  COMP     TILE.X  TILE.Y  TILE.Z  NOISE   HSCALE  HSMOOTH
-        DET_IMAGE       FITS    NONE	-32     RICE     0       1       1       16      0       0
-        DET_MASK        FITS    NONE	8       PLIO     0       1       1       0       0       0
-        DET_WEIGHT      FITS    NONE	-32     RICE     0       1       1       16      0       0
-        SKY_IMAGE       FITS    NONE	-32     RICE     0       1       1       16      0       0
-        SKY_MASK        FITS    NONE	8       PLIO     0       1       1       0       0       0
-        SKY_WEIGHT      FITS    NONE	-32     RICE     0       1       1       16      0       0
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
 END
 
Index: /trunk/ippconfig/tc3/camera.config
===================================================================
--- /trunk/ippconfig/tc3/camera.config	(revision 16187)
+++ /trunk/ippconfig/tc3/camera.config	(revision 16188)
@@ -63,4 +63,74 @@
 #	PPSTATS		STR	tc3/ppStats.config		# ppStats recipe
 	PPIMAGE         STR     tc3/ppImage.config		# ppImage recipe
+END
+
+FITS    METADATA
+# BITPIX is the bits per pixel for writing the output data
+# COMP = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ] are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE [0..16] is the number of "noise bits" to preserve when quantising floating point data; 16 for no loss
+# HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
 END
 
Index: /trunk/ippconfig/tek/camera.config
===================================================================
--- /trunk/ippconfig/tek/camera.config	(revision 16187)
+++ /trunk/ippconfig/tek/camera.config	(revision 16188)
@@ -51,4 +51,74 @@
 END
 
+FITS    METADATA
+# BITPIX is the bits per pixel for writing the output data
+# COMP = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ] are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE [0..16] is the number of "noise bits" to preserve when quantising floating point data; 16 for no loss
+# HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
+END
+
 FILERULES METADATA
    PSASTRO.INPUT       STR PSASTRO.INPUT.CMF
Index: /trunk/ippconfig/ucam/camera.config
===================================================================
--- /trunk/ippconfig/ucam/camera.config	(revision 16187)
+++ /trunk/ippconfig/ucam/camera.config	(revision 16188)
@@ -44,4 +44,74 @@
 	# Recipes for ppImage
         # PPIMAGE         STR     ucam/ppImage.config     # Default: all (normal) options on
+END
+
+FITS    METADATA
+# BITPIX is the bits per pixel for writing the output data
+# COMP = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ] are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE [0..16] is the number of "noise bits" to preserve when quantising floating point data; 16 for no loss
+# HSCALE is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+
+# BITPIX(S32) is the bits per pixel for writing the output data
+# COMPRESSION(STR) = NONE|RICE|GZIP|HCOMPRESS|PLIO is the compression algorithm
+# TILE.[XYZ](S32) are the tile sizes.  0 means entire the dimension, so (0,1,1) forms tiles from rows
+# NOISE(S32) [0..16] is the number of "noise bits" to preserve when quantising floating point data
+# HSCALE(S32) is the scale factor for lossy compression with HCOMPRESS; 0 or 1 for none; 2*RMS --> 10x compression
+# HSMOOTH(S32) is the smoothing to apply to HCOMPRESSed data when decompressing; 0 for none
+# SCALING(STR) = NONE|RANGE|STDEV_POSITIVE|STDEV_NEGATIVE|STDEV_BOTH|MANUAL is the scaling scheme
+# BSCALE(F32) is the manual scaling to apply (when SCALING = MANUAL)
+# BZERO(F32) is the manual zero-point to apply (when SCALING = MANUAL)
+# STDEV.BITS(S32) is the number of bits to map to a standard deviation (when SCALING = STDEV_*)
+# STDEV.NUM(F32) is the number of standard deviations to the edge (when SCALING = STDEV_NEGATIVE|STDEV_POSITIVE)
+# FLOAT(STR) is the name of a custom floating-point type
+
+	DET_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	DET_MASK	METADATA
+		BITPIX		S32	8
+	END
+	DET_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	SKY_IMAGE	METADATA
+		BITPIX		S32	-32
+	END
+	SKY_MASK	METADATA
+		BITPIX		S32	8
+	END
+	SKY_WEIGHT	METADATA
+		BITPIX		S32	-32
+	END
+
+	COMPRESSED_POSITIVE	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_POSITIVE
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	10
+		COMPRESSSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_MASK		METADATA
+		COMPRESSION	STR	PLIO
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+	COMPRESSED_SUBTRACTION	METADATA
+		BITPIX		S32	16
+		SCALING		STR	SIGMA_BOTH
+		SIGMA.BITS	S32	4
+		SIGMA.NUM	F32	5
+		COMPRESSION	STR	RICE
+		TILE.X		S32	0
+		TILE.Y		S32	1
+		TILE.Z		S32	1
+	END
+
 END