Index: /trunk/ippconfig/sdssmosaic/.cvsignore =================================================================== --- /trunk/ippconfig/sdssmosaic/.cvsignore (revision 18197) +++ /trunk/ippconfig/sdssmosaic/.cvsignore (revision 18197) @@ -0,0 +1,2 @@ +Makefile +Makefile.in Index: /trunk/ippconfig/sdssmosaic/Makefile.am =================================================================== --- /trunk/ippconfig/sdssmosaic/Makefile.am (revision 18197) +++ /trunk/ippconfig/sdssmosaic/Makefile.am (revision 18197) @@ -0,0 +1,24 @@ + +installdir = $(datadir)/ippconfig/isp + +install_files = \ + dvo.config \ + dvo.layout \ + camera.config \ + format.config \ + cmp.config \ + cmf.config \ + ppImage.config \ + ppMerge.config \ + psastro.config \ + psphot.config \ + rejections.config + +install_DATA = $(install_files) + +install-data-hook: + chmod 0755 $(installdir) + +EXTRA_DIST = $(install_files) + +ACLOCAL_AMFLAGS = -I m4 Index: /trunk/ippconfig/sdssmosaic/camera.config =================================================================== --- /trunk/ippconfig/sdssmosaic/camera.config (revision 18197) +++ /trunk/ippconfig/sdssmosaic/camera.config (revision 18197) @@ -0,0 +1,93 @@ +# Camera configuration file for co-adding reduced SDSS images of stripe82 +# Attempt to designate all 6 camcols as a single mosaic camera +# Copied from SDSS camera config files, which in turn were copied +# from ISP config files +# Sebastian Jester jester at mpia.de August 27, 2007 + +# File formats that we know about +FORMATS METADATA + SDSSmosaic STR sdssmosaic/format.config +END + +# Description of camera --- all the chips and the cells that comprise them +FPA METADATA + CHIP1 STR Cell + CHIP2 STR Cell + CHIP3 STR Cell + CHIP4 STR Cell + CHIP5 STR Cell + CHIP6 STR Cell +END + +# valid filter names and corresponding IDs +FILTER.ID METADATA + g STR g + r STR r + i STR i + z STR z + u STR u +END + +# Table of strings to use for the class identifier (see ippdb) according to the file level. +CLASSID METADATA + FPA STR fpa +END + +DVO.CAMERADIR STR sdss # Camera directory for DVO + +# convert supplied FPA.OBSTYPE values to abstract exptype names +OBSTYPE.TABLE METADATA + bias STR BIAS + zero STR BIAS + dark STR DARK + flat STR SKYFLAT + skyflat STR SKYFLAT + domeflat STR DOMEFLAT + object STR OBJECT + science STR OBJECT +END + +# Recipe options +RECIPES METADATA + PSPHOT STR sdssmosaic/psphot.config # psphot details + PSASTRO STR sdssmosaic/psastro.config # psastro details + PPIMAGE STR sdssmosaic/ppImage.config # Recipes for ppImage + PPMERGE STR sdssmosaic/ppMerge.config # Recipes for ppMerge + PSWARP STR sdssmosaic/pswarp.config # Recipes for pswarp + REJECTIONS STR sdssmosaic/rejections.config +END + +# Reduction classes +REDUCTION METADATA + # Detrend processing not needed for these + # photometry only for pre-detrended images + # This one used to be called PROCESSED + SDSSphotonly METADATA + CHIP STR PPIMAGE_OP_SOFT + JPEG_BIN1 STR PPIMAGE_J1 + JPEG_BIN2 STR PPIMAGE_J2 + END + # photometry only for pre-detrended images + SDSSphotast METADATA + CHIP STR PPIMAGE_OA_SOFT + JPEG_BIN1 STR PPIMAGE_J1 + JPEG_BIN2 STR PPIMAGE_J2 + END +END + +FILERULES STR sdssmosaic/filerules.mdc + +EXTNAME.RULES METADATA + CMF.HEAD STR cmf.hdr + CMF.DATA STR cmf.psf # use .PSF and .EXT? + + PSF.HEAD STR hdr + PSF.TABLE STR psf_model + PSF.RESID STR psf_resid +END + +BLANK.HEADERS METADATA + FPA.TIME STR TAI + FPA.EXPOSURE STR EXPTIME + FPA.AIRMASS STR AIRMASS +END Index: /trunk/ippconfig/sdssmosaic/cmf.config =================================================================== --- /trunk/ippconfig/sdssmosaic/cmf.config (revision 18197) +++ /trunk/ippconfig/sdssmosaic/cmf.config (revision 18197) @@ -0,0 +1,84 @@ +# Pan-STARRS Imaging Sky Probe + +# How to identify this type +RULE METADATA + SIMPLE BOOL TRUE + NAXIS S32 0 + TELESCOP STR ISP-1 + INSTRUME STR ISP-Apogee + DETECTOR STR ISP-Apogee-01 + ISPCAMER STR Apogee U42 +END + +# How to read this data +FILE METADATA + PHU STR FPA # The FITS file represents an entire FPA + EXTENSIONS STR NONE # There are no extensions + FPA.NAME STR SEQID # A PHU keyword for unique identifier within the hierarchy level +END + +# What's in the FITS file? +CONTENTS STR Chip:Cell:amplifier + +# Specify the cell data +CELLS METADATA + amplifier METADATA + CELL.TRIMSEC.SOURCE STR HEADER + CELL.BIASSEC.SOURCE STR HEADER + CELL.TRIMSEC STR TRIMSEC + CELL.BIASSEC STR BIASSEC + END +END + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.OBSTYPE STR OBSTYPE + FPA.OBJECT STR OBSTYPE + FPA.FILTER STR FILTNAME + FPA.RA STR RA + FPA.DEC STR DEC + FPA.RADECSYS STR RADECSYS + FPA.ALT STR ALT + FPA.AZ STR AZ + FPA.POSANGLE STR ROTANGLE + FPA.AIRMASS STR AIRMASS + FPA.TIME STR MJD-OBS + CHIP.TEMP STR CCDTEMP + CELL.EXPOSURE STR EXPTIME + CELL.DARKTIME STR DARKTIME + CELL.TIME STR MJD-OBS + CELL.GAIN STR GAIN + CELL.READNOISE STR RDNOISE + CELL.XBIN STR XBIN + CELL.YBIN STR YBIN +# CELL.SATURATION STR SATURATE ### Currently set to 0 ??? + CELL.BAD STR BADLEVEL +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA + FPA.TIMESYS STR UTC + CELL.SATURATION F32 65535 + CELL.READDIR S32 1 + CELL.TIMESYS STR UTC + CHIP.XPARITY S32 1 + CHIP.YPARITY S32 1 + CHIP.X0 S32 0 + CHIP.Y0 S32 0 + CELL.XPARITY S32 1 + CELL.YPARITY S32 1 + CELL.X0 S32 0 + CELL.Y0 S32 0 +END + +FORMATS METADATA + FPA.RA STR HOURS + FPA.DEC STR DEGREES + FPA.TIME STR MJD + CELL.TIME STR MJD +END + +# PS Concepts to get from the database +DATABASE METADATA +# None. +END Index: /trunk/ippconfig/sdssmosaic/cmp.config =================================================================== --- /trunk/ippconfig/sdssmosaic/cmp.config (revision 18197) +++ /trunk/ippconfig/sdssmosaic/cmp.config (revision 18197) @@ -0,0 +1,84 @@ +# Pan-STARRS Imaging Sky Probe + +# How to identify this type +RULE METADATA + SIMPLE BOOL FALSE + NAXIS S32 0 + TELESCOP STR ISP-1 + INSTRUME STR ISP-Apogee + DETECTOR STR ISP-Apogee-01 + ISPCAMER STR Apogee U42 +END + +# How to read this data +FILE METADATA + PHU STR FPA # The FITS file represents an entire FPA + EXTENSIONS STR NONE # There are no extensions + FPA.NAME STR SEQID # A PHU keyword for unique identifier within the hierarchy level +END + +# What's in the FITS file? +CONTENTS STR Chip:Cell:amplifier + +# Specify the cell data +CELLS METADATA + amplifier METADATA + CELL.TRIMSEC.SOURCE STR HEADER + CELL.BIASSEC.SOURCE STR HEADER + CELL.TRIMSEC STR TRIMSEC + CELL.BIASSEC STR BIASSEC + END +END + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.OBSTYPE STR OBSTYPE + FPA.OBJECT STR OBSTYPE + FPA.FILTER STR FILTNAME + FPA.RA STR RA + FPA.DEC STR DEC + FPA.RADECSYS STR RADECSYS + FPA.ALT STR ALT + FPA.AZ STR AZ + FPA.POSANGLE STR ROTANGLE + FPA.AIRMASS STR AIRMASS + FPA.TIME STR MJD-OBS + CHIP.TEMP STR CCDTEMP + CELL.EXPOSURE STR EXPTIME + CELL.DARKTIME STR DARKTIME + CELL.TIME STR MJD-OBS + CELL.GAIN STR GAIN + CELL.READNOISE STR RDNOISE + CELL.XBIN STR XBIN + CELL.YBIN STR YBIN +# CELL.SATURATION STR SATURATE ### Currently set to 0 ??? + CELL.BAD STR BADLEVEL +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA + FPA.TIMESYS STR UTC + CELL.SATURATION F32 65535 + CELL.READDIR S32 1 + CELL.TIMESYS STR UTC + CHIP.XPARITY S32 1 + CHIP.YPARITY S32 1 + CHIP.X0 S32 0 + CHIP.Y0 S32 0 + CELL.XPARITY S32 1 + CELL.YPARITY S32 1 + CELL.X0 S32 0 + CELL.Y0 S32 0 +END + +FORMATS METADATA + FPA.RA STR HOURS + FPA.DEC STR DEGREES + FPA.TIME STR MJD + CELL.TIME STR MJD +END + +# PS Concepts to get from the database +DATABASE METADATA +# None. +END Index: /trunk/ippconfig/sdssmosaic/dvo.config =================================================================== --- /trunk/ippconfig/sdssmosaic/dvo.config (revision 18197) +++ /trunk/ippconfig/sdssmosaic/dvo.config (revision 18197) @@ -0,0 +1,71 @@ +DVO.CAMERADIR /home/jester/IPP/ippconfig/sdssmosaic + +# location of DVO database tables +CATDIR /disk1/jester/data/SDSS/stripe82/coadd/catdir + +# keywords used by DVO to interpret the headers + +# used by parse_time to find time-related keywords +MJD-KEYWORD NONE +DATE-KEYWORD DATE-OBS +DATE-MODE YYYY-MM-DD +UT-KEYWORD TAIHMS +JD-KEYWORD NONE + +# other keyword abstractions +EXPTIME-KEYWORD EXPTIME +AIRMASS-KEYWORD AIRMASS +CCDNUM-KEYWORD EXTNAME +ST-KEYWORD NONE +OBSERVATORY-LATITUDE NONE +OBSERVATORY-LONGITUDE NONE +SUBPIX_DATAFILE NONE + +# instrumental magnitude range for calibration mode +CAL_INSTMAG_MAX -7.0 +CAL_INSTMAG_MIN -9.5 + +# exclude overscan region from the dB image boundaries +XOVERSCAN 0 +YOVERSCAN 0 + +# only upload stars within region; a value of 0 means ignore the limit +ADDSTAR_XMIN 0 +ADDSTAR_XMAX 0 +ADDSTAR_YMIN 0 +ADDSTAR_YMAX 0 + +# exclude stars with SN > SNLIMIT (ADDSTAR_SNLIMIT overrides old name MIN_SN_FSTAT) +ADDSTAR_SNLIMIT 0 + +# allowed astrometry error (arcseconds) +ADDSTAR_MAX_CERROR 2.0 + +# correlation radius (arcseconds) +ADDSTAR_RADIUS 2.0 + +# scaled correlation radius +ADDSTAR_NSIGMA 0 + +IMAGE_SCATTER 0.075 # mark images POOR if stdev(Mcal) > IMAGE_SCATTER +STAR_SCATTER 0.005 # mark stars POOR if stdev(Mrel) > STAR_SCATTER +IMAGE_OFFSET 0.100 # mark images POOR if abs(delta(Mcal)) > IMAGE_OFFSET +STAR_CHISQ 10.0 # mark stars POOR if Xm > STAR_CHISQ +STAR_TOOFEW 3 # mark star FEW if N(good) < STAR_TOOFEW +IMAGE_TOOFEW 10 # mark image FEW if N(good) < IMAGE_TOOFEW +IMAGE_GOOD_FRACTION 0.05 # mark image FEW if N(good) < IMAGE_GOOD_FRACTION * Nstars + +SCATTER_LIM 15.0 +MAG_LIM 20.0 # select stars brighter than this for relphot analysis +SIGMA_LIM 0.015 # select measurements with dM < SIGMA_LIM for relphot analysis +# INST_MAG_MIN -17 # optional constraints on magnitude ranges +# INST_MAG_MAX -13 # optional constraints on magnitude ranges + +RELPHOT_GRID_BINNING 256 +RELPHOT_GRID_X 6 +RELPHOT_GRID_Y 14 + +PM_DT_MIN 0.25 +PM_TOOFEW 4 +POS_TOOFEW 1 + Index: /trunk/ippconfig/sdssmosaic/dvo.layout =================================================================== --- /trunk/ippconfig/sdssmosaic/dvo.layout (revision 18197) +++ /trunk/ippconfig/sdssmosaic/dvo.layout (revision 18197) @@ -0,0 +1,59 @@ +# this file defines the layout of the mosaic imager: +# +# SJ: I don't know what it does... help! + +NCCD 6 +NAXIS1 2048 +NAXIS2 1361 + +MOSAIC_X 6 +MOSAIC_Y 1 + +# lines need to contain: + +CHIPID_KEYWORD EXTNAME + +# ID CHIPID xoffset yoffset xflip yflip datasec biassec Xo Yo theta +CCD.0 ccd00 1 3 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.1 ccd01 2 3 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.2 ccd02 3 3 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.3 ccd03 4 3 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.4 ccd04 5 3 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.5 ccd05 6 3 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.6 ccd06 7 3 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.7 ccd07 8 3 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.8 ccd08 9 3 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.9 ccd09 1 2 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.10 ccd10 2 2 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.11 ccd11 3 2 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.12 ccd12 4 2 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.13 ccd13 5 2 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.14 ccd14 6 2 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.15 ccd15 7 2 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.16 ccd16 8 2 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.17 ccd17 9 2 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.18 ccd18 1 1 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.19 ccd19 2 1 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.20 ccd20 3 1 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.21 ccd21 4 1 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.22 ccd22 5 1 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.23 ccd23 6 1 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.24 ccd24 7 1 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.25 ccd25 8 1 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.26 ccd26 9 1 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.27 ccd27 1 0 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.28 ccd28 2 0 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.29 ccd29 3 0 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.30 ccd30 4 0 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.31 ccd31 5 0 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.32 ccd32 6 0 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.33 ccd33 7 0 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.34 ccd34 8 0 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.35 ccd35 9 0 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.36 ccd36 0 2 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.37 ccd37 10 2 1 1 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.38 ccd38 0 1 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 +CCD.39 ccd39 10 1 0 0 [6:2049,5:4100] [2085:2110,2:4400] 0 0 0 + +# can we use header to find biassec +USE_BIASSEC 1 Index: /trunk/ippconfig/sdssmosaic/filerules.mdc =================================================================== --- /trunk/ippconfig/sdssmosaic/filerules.mdc (revision 18197) +++ /trunk/ippconfig/sdssmosaic/filerules.mdc (revision 18197) @@ -0,0 +1,132 @@ +PSASTRO.INPUT STR PSASTRO.INPUT.CMF +PSASTRO.OUTPUT STR PSASTRO.OUTPUT.CMF.SPL +PSPHOT.OUTPUT STR PSPHOT.OUTPUT.CMF.SPL + +### input file definitions +### use @DETDB entries to get the detrend images from the database +### replace @DETDB with @FILES if you want to require it from the +### command line, or with an explicit name to require a specific file +TYPE INPUT FILENAME.RULE DATA.LEVEL FILE.TYPE + +## files used by ppImage +PPIMAGE.INPUT INPUT @FILES CHIP IMAGE +PPIMAGE.MASK INPUT @DETDB CHIP MASK +PPIMAGE.BIAS INPUT @DETDB CHIP IMAGE +PPIMAGE.DARK INPUT @DETDB CHIP DARK +PPIMAGE.FLAT INPUT @DETDB CHIP IMAGE +PPIMAGE.FRINGE INPUT @DETDB CHIP FRINGE +PPIMAGE.SHUTTER INPUT @DETDB CHIP IMAGE + +## Files used by ppMerge +PPMERGE.INPUT INPUT @FILES CHIP IMAGE +PPMERGE.INPUT.MASK INPUT @FILES CHIP MASK +PPMERGE.INPUT.WEIGHT INPUT @FILES CHIP WEIGHT + +## files used to build and apply the flat-field correction images +DVOCORR.INPUT INPUT @FILES CHIP IMAGE +DVOCORR.REFHEAD INPUT @FILES CHIP HEADER +DVOFLAT.INPUT INPUT @FILES CHIP IMAGE +DVOFLAT.CORR INPUT @DETDB CHIP IMAGE + +## files used by psphot +PSPHOT.LOAD INPUT @FILES CHIP IMAGE +PSPHOT.INPUT INPUT @FILES CHIP IMAGE +PSPHOT.MASK INPUT @FILES CHIP MASK +PSPHOT.WEIGHT INPUT @FILES CHIP WEIGHT +PSPHOT.PSF.LOAD INPUT @FILES CHIP PSF +PSPHOT.INPUT.CMF INPUT @FILES CHIP CMF + +## files used by psastro +PSASTRO.WCS INPUT none.fits CHIP CMF +PSASTRO.MODEL INPUT @DETDB FPA ASTROM +PSASTRO.INPUT.CMP INPUT @FILES CHIP CMP +PSASTRO.INPUT.CMF INPUT @FILES CHIP CMF + +## files used by pswarp +PSWARP.INPUT INPUT @FILES CHIP IMAGE +PSWARP.WEIGHT INPUT @FILES CHIP WEIGHT +PSWARP.MASK INPUT @FILES CHIP MASK +PSWARP.SKYCELL INPUT @FILES FPA IMAGE +PSWARP.ASTROM INPUT @FILES CHIP CMF + +PPSUB.INPUT INPUT @FILES FPA IMAGE +PPSUB.INPUT.MASK INPUT @FILES FPA MASK +PPSUB.INPUT.WEIGHT INPUT @FILES FPA WEIGHT +PPSUB.REF INPUT @FILES FPA IMAGE +PPSUB.REF.MASK INPUT @FILES FPA MASK +PPSUB.REF.WEIGHT INPUT @FILES FPA WEIGHT + +PPSTACK.INPUT INPUT @FILES FPA IMAGE +PPSTACK.INPUT.MASK INPUT @FILES FPA MASK +PPSTACK.INPUT.WEIGHT INPUT @FILES FPA WEIGHT + +### output file definitions +TYPE OUTPUT FILENAME.RULE FILE.TYPE DATA.LEVEL FILE.SAVE FILE.FORMAT +PPIMAGE.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fits IMAGE CHIP TRUE NONE +PPIMAGE.OUTPUT.MASK OUTPUT {OUTPUT}.{CHIP.NAME}.mask.fits MASK CHIP TRUE NONE +PPIMAGE.OUTPUT.WEIGHT OUTPUT {OUTPUT}.{CHIP.NAME}.wt.fits WEIGHT CHIP TRUE NONE +PPIMAGE.CHIP OUTPUT {OUTPUT}.{CHIP.NAME}.ch.fits IMAGE CHIP TRUE NONE +PPIMAGE.CHIP.MASK OUTPUT {OUTPUT}.{CHIP.NAME}.ch.mask.fits MASK CHIP TRUE NONE +PPIMAGE.CHIP.WEIGHT OUTPUT {OUTPUT}.{CHIP.NAME}.ch.wt.fits WEIGHT CHIP TRUE NONE +PPIMAGE.OUTPUT.FPA1 OUTPUT {OUTPUT}.fpa1.fits IMAGE FPA TRUE NONE +PPIMAGE.OUTPUT.FPA2 OUTPUT {OUTPUT}.fpa2.fits IMAGE FPA TRUE NONE +PPIMAGE.STATS OUTPUT {OUTPUT}.stats STATS FPA TRUE NONE + +PPIMAGE.JPEG1 OUTPUT {OUTPUT}.b1.jpg JPEG FPA TRUE NONE +PPIMAGE.JPEG2 OUTPUT {OUTPUT}.b2.jpg JPEG FPA TRUE NONE +PPIMAGE.BIN1 OUTPUT {OUTPUT}.{CHIP.NAME}.b1.fits IMAGE CHIP TRUE NONE +PPIMAGE.BIN2 OUTPUT {OUTPUT}.{CHIP.NAME}.b2.fits IMAGE CHIP TRUE NONE + +DVOCORR.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fc.fits IMAGE CHIP TRUE NONE +DVOFLAT.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.co.fits IMAGE CHIP TRUE NONE + +PSPHOT.RESID OUTPUT {OUTPUT}.{CHIP.NAME}.res.fits IMAGE CHIP TRUE NONE +PSPHOT.BACKGND OUTPUT {OUTPUT}.{CHIP.NAME}.bck.fits IMAGE CHIP TRUE NONE +PSPHOT.BACKSUB OUTPUT {OUTPUT}.{CHIP.NAME}.sub.fits IMAGE CHIP TRUE NONE +PSPHOT.BACKMDL OUTPUT {OUTPUT}.{CHIP.NAME}.mdl.fits IMAGE CHIP TRUE NONE +PSPHOT.BACKMDL.STDEV OUTPUT {OUTPUT}.{CHIP.NAME}.mdd.fits IMAGE CHIP TRUE NONE + +PSPHOT.OUTPUT.RAW OUTPUT {OUTPUT}.{CHIP.NAME} RAW CHIP TRUE NONE +PSPHOT.OUTPUT.SX OUTPUT {OUTPUT}.{CHIP.NAME}.sx SX CHIP TRUE NONE +PSPHOT.OUTPUT.OBJ OUTPUT {OUTPUT}.{CHIP.NAME}.obj OBJ CHIP TRUE NONE +# PSPHOT.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.cmf CMF CHIP TRUE NONE +PSPHOT.OUTPUT.CMF.SPL OUTPUT {OUTPUT}.{CHIP.NAME}.cmf CMF CHIP TRUE NONE +PSPHOT.OUTPUT.CMF.MEF OUTPUT {OUTPUT}.cmf CMF FPA TRUE NONE + +PSPHOT.PSF.SAVE OUTPUT {OUTPUT}.{CHIP.NAME}.psf PSF CHIP TRUE NONE + +SOURCE.PLOT.MOMENTS OUTPUT {OUTPUT}.{CHIP.NAME}.mnt.png KAPA CHIP TRUE NONE +SOURCE.PLOT.PSFMODEL OUTPUT {OUTPUT}.{CHIP.NAME}.psf.png KAPA CHIP TRUE NONE +SOURCE.PLOT.APRESID OUTPUT {OUTPUT}.{CHIP.NAME}.dap.png KAPA CHIP TRUE NONE + +PSASTRO.OUTPUT.CMP OUTPUT {OUTPUT}.{CHIP.NAME}.smp CMP CHIP TRUE NONE +PSASTRO.OUTPUT.CMF.SPL OUTPUT {OUTPUT}.{CHIP.NAME}.smf CMF CHIP TRUE NONE +PSASTRO.OUTPUT.CMF.MEF OUTPUT {OUTPUT}.smf CMF FPA TRUE NONE +#following was missing, is this the right thing to do??? +PSASTRO.OUTPUT.MEF OUTPUT {OUTPUT}.smf CMF FPA TRUE NONE + +PSWARP.OUTPUT OUTPUT {OUTPUT}.fits IMAGE FPA TRUE NONE +PSWARP.OUTPUT.MASK OUTPUT {OUTPUT}.mask.fits MASK FPA TRUE NONE +PSWARP.OUTPUT.WEIGHT OUTPUT {OUTPUT}.wt.fits WEIGHT FPA TRUE NONE +PSWARP.OUTPUT.SOURCES OUTPUT {OUTPUT}.cmf CMF FPA TRUE NONE +PSWARP.BIN1 OUTPUT {OUTPUT}.b1.fits IMAGE FPA TRUE NONE +PSWARP.BIN2 OUTPUT {OUTPUT}.b2.fits IMAGE FPA TRUE NONE + +SKYCELL.STATS OUTPUT {OUTPUT}.stats STATS FPA TRUE NONE +SKYCELL.TEMPLATE OUTPUT {OUTPUT}.skycell SKYCELL FPA TRUE NONE + +PPSUB.OUTPUT OUTPUT {OUTPUT}.fits IMAGE FPA TRUE NONE +PPSUB.OUTPUT.MASK OUTPUT {OUTPUT}.mask.fits MASK FPA TRUE NONE +PPSUB.OUTPUT.WEIGHT OUTPUT {OUTPUT}.wt.fits WEIGHT FPA TRUE NONE + +PPSTACK.OUTPUT OUTPUT {OUTPUT}.fits IMAGE FPA TRUE NONE +PPSTACK.OUTPUT.MASK OUTPUT {OUTPUT}.mask.fits MASK FPA TRUE NONE +PPSTACK.OUTPUT.WEIGHT OUTPUT {OUTPUT}.weight.fits WEIGHT FPA TRUE NONE + +PPSIM.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fits IMAGE CHIP TRUE NONE + +LOG.IMFILE OUTPUT {OUTPUT}.{CHIP.NAME}.log TEXT CHIP TRUE NONE +LOG.EXP OUTPUT {OUTPUT}.log TEXT FPA TRUE NONE + +TRACE.IMFILE OUTPUT {OUTPUT}.{CHIP.NAME}.trace TEXT CHIP TRUE NONE +TRACE.EXP OUTPUT {OUTPUT}.trace TEXT FPA TRUE NONE Index: /trunk/ippconfig/sdssmosaic/format.config =================================================================== --- /trunk/ippconfig/sdssmosaic/format.config (revision 18197) +++ /trunk/ippconfig/sdssmosaic/format.config (revision 18197) @@ -0,0 +1,139 @@ +# SDSSmosaic camera, starting from SDSS from Pan-STARRS Imaging Sky Probe +# Sebastian Jester jester at mpia.de August 7, 2007 + +# How to identify this type +RULE METADATA + SIMPLE BOOL TRUE +# NAXIS S32 2 + ORIGIN STR SDSS + TELESCOP STR 2.5m +END + +# How to read this data +FILE METADATA + PHU STR CHIP # The FITS file represents one camcol = chip, + # 6 of which make the FPA + EXTENSIONS STR NONE # There are no extensions + FPA.NAME STR FRAME # A PHU keyword for unique identifier within + # the hierarchy level - just needs to be the same + # for all 6 files belonging to the same "exposure" + CHIP.NAME STR CAMCOL # Distinguishes chip name + # CONTENT STR {CHIP.NAME} # used to work?? + CONTENT STR CAMCOL +END + +# What's in the FITS file? +# CONTENTS STR Chip:Cell:amplifier +CONTENTS METADATA + # Content name, chipType + 1 STR CHIP1:Chip + 2 STR CHIP2:Chip + 3 STR CHIP3:Chip + 4 STR CHIP4:Chip + 5 STR CHIP5:Chip + 6 STR CHIP6:Chip +END + +# Specify the chips +CHIPS METADATA + # Chip type, cellName:cellType + Chip STR Cell:Cell +END + + +# Specify the cell data +CELLS METADATA + Cell METADATA +# CELL.TRIMSEC.SOURCE STR HEADER +# CELL.TRIMSEC STR TRIMSEC + CELL.TRIMSEC.SOURCE STR VALUE + CELL.TRIMSEC STR [1:2048,1:1361] +# CELL.BIASSEC.SOURCE STR HEADER +# CELL.BIASSEC STR BIASSEC + END +END +# NB: If we could look up the gains etc. separately for both amplifiers, +# we could split the chips into cells for each amp + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.TELESCOPE STR TELESCOP +# FPA.INSTRUMENT actually needs to be identical to the CAMERA, +# so I'm moving it from here down to the defaults to make sure that +# this is ture +# FPA.INSTRUMENT STR ORIGIN + FPA.DETECTOR STR CCDLOC +# FPA.AIRMASS STR AIRMASS + FPA.OBSTYPE STR FLAVOR + FPA.OBJECT STR OBJECT + FPA.FILTERID STR FILTER + FPA.FILTER STR FILTER + FPA.POSANGLE STR IPA + FPA.RA STR RA + FPA.DEC STR DEC + FPA.RADECSYS STR RADECSYS +# FPA.FOCUS STR TELFOCUS + FPA.TIME STR DATE-OBS TAIHMS # Two values are interpreted as date and time + FPA.TIMESYS STR TIMESYS + FPA.ALT STR ALT + FPA.AZ STR AZ +# FPA.TEMP STR CCDTEMP + FPA.EXPOSURE STR EXPTIME + CHIP.TEMP STR CCDTEMP + CELL.EXPOSURE STR EXPTIME + CELL.DARKTIME STR EXPTIME + CELL.TIME STR DATE-OBS TAIHMS +# CELL.GAIN STR GAIN +# CELL.READNOISE STR RDNOISE +# CELL.SATURATION STR SATURATE ### Currently set to 0 ??? +# CELL.TIMESYS STR TIMESYS + CELL.XBIN STR COLBIN + CELL.YBIN STR ROWBIN +# these were used for some early data +# CELL.XBIN STR XBIN +# CELL.YBIN STR YBIN +# CELL.BAD STR BADLEVEL +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA + FPA.INSTRUMENT STR SDSSmosaic +# The gain is only roughly correct... + CELL.GAIN F32 5.0 +# readnoise is from http://www.sdss.org/dr6/instruments/imager/index.html +# Note that I have emails from Jim Gunn saying dark noise *is* important... + CELL.READNOISE F32 5.0 + FPA.AIRMASS F32 1.3 + CHIP.XSIZE S32 2048 + CHIP.YSIZE S32 1361 + CELL.XSIZE S32 2048 + CELL.YSIZE S32 1361 +# FPA.TIMESYS STR UTC + CELL.SATURATION F32 60000 + CELL.READDIR S32 1 + CELL.TIMESYS STR UTC + CHIP.XPARITY S32 1 + CHIP.YPARITY S32 1 + CHIP.X0 S32 0 + CHIP.Y0 S32 0 + CELL.XPARITY S32 1 + CELL.YPARITY S32 1 + CELL.X0 S32 0 + CELL.Y0 S32 0 +# CELL.XBIN S32 1 +# CELL.YBIN S32 1 +END + +FORMATS METADATA + FPA.RA STR DEGREES + FPA.DEC STR DEGREES + FPA.TIME STR SEPARATE YEAR.FIRST +# FPA.TIME STR MJD + CELL.TIME STR SEPARATE YEAR.FIRST +# CELL.TIME STR MJD +END + +# PS Concepts to get from the database +DATABASE METADATA +# None. +END Index: /trunk/ippconfig/sdssmosaic/format_skycell.config =================================================================== --- /trunk/ippconfig/sdssmosaic/format_skycell.config (revision 18197) +++ /trunk/ippconfig/sdssmosaic/format_skycell.config (revision 18197) @@ -0,0 +1,110 @@ +# SDSS camera, starting from Pan-STARRS Imaging Sky Probe +# Sebastian Jester jester at mpia.de August 7, 2007 + +# How to identify this type - if the following header values match, it's accepted. +RULE METADATA + SIMPLE BOOL TRUE +# NAXIS S32 2 + ORIGIN STR SDSS + TELESCOP STR 2.5m +END + +# How to read this data +FILE METADATA + PHU STR FPA # The FITS file represents an entire FPA + EXTENSIONS STR NONE # There are no extensions + FPA.NAME STR FRAME # A PHU keyword for unique identifier within the hierarchy level +END + +# What's in the FITS file? +CONTENTS STR Chip:Cell:amplifier + +# Specify the cell data +CELLS METADATA + amplifier METADATA +# CELL.TRIMSEC.SOURCE STR HEADER + CELL.TRIMSEC.SOURCE STR VALUE +# CELL.BIASSEC.SOURCE STR HEADER +# CELL.TRIMSEC STR TRIMSEC + CELL.TRIMSEC STR [1:2048,1:1361] +# CELL.BIASSEC STR BIASSEC + END +END + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.TELESCOPE STR TELESCOP + FPA.INSTRUMENT STR ORIGIN +# Need the following? + FPA.DETECTOR STR CCDLOC +# FPA.AIRMASS STR AIRMASS + FPA.OBSTYPE STR FLAVOR + FPA.OBJECT STR OBJECT + FPA.FILTERID STR FILTER + FPA.FILTER STR FILTER + FPA.POSANGLE STR IPA + FPA.RA STR RA + FPA.DEC STR DEC + FPA.RADECSYS STR RADECSYS +# FPA.FOCUS STR TELFOCUS + FPA.TIME STR TAI + FPA.TIMESYS STR TIMESYS + FPA.ALT STR ALT + FPA.AZ STR AZ +# FPA.TEMP STR CCDTEMP + FPA.EXPOSURE STR EXPTIME + CHIP.TEMP STR CCDTEMP + CELL.EXPOSURE STR EXPTIME + CELL.DARKTIME STR EXPTIME + CELL.TIME STR TAI +# CELL.GAIN STR GAIN +# CELL.READNOISE STR RDNOISE +# CELL.SATURATION STR SATURATE ### Currently set to 0 ??? +# CELL.TIMESYS STR TIMESYS + CELL.XBIN STR COLBIN + CELL.YBIN STR ROWBIN +# these were used for some early data +# CELL.XBIN STR XBIN +# CELL.YBIN STR YBIN +# CELL.BAD STR BADLEVEL +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA +# The gain is only roughly correct... + CELL.GAIN F32 5.0 +# readnoise is from http://www.sdss.org/dr6/instruments/imager/index.html +# Note that I have emails from Jim Gunn saying dark noise *is* important... + CELL.READNOISE F32 5.0 + FPA.AIRMASS F32 1.3 + CHIP.XSIZE S32 2048 + CHIP.YSIZE S32 1361 + CELL.XSIZE S32 2048 + CELL.YSIZE S32 2048 +# FPA.TIMESYS STR UTC + CELL.SATURATION F32 60000 + CELL.READDIR S32 1 + CELL.TIMESYS STR UTC + CHIP.XPARITY S32 1 + CHIP.YPARITY S32 1 + CHIP.X0 S32 0 + CHIP.Y0 S32 0 + CELL.XPARITY S32 1 + CELL.YPARITY S32 1 + CELL.X0 S32 0 + CELL.Y0 S32 0 +# CELL.XBIN S32 1 +# CELL.YBIN S32 1 +END + +FORMATS METADATA + FPA.RA STR DEGREES + FPA.DEC STR DEGREES + FPA.TIME STR MJD + CELL.TIME STR MJD +END + +# PS Concepts to get from the database +DATABASE METADATA +# None. +END Index: /trunk/ippconfig/sdssmosaic/ppImage.config =================================================================== --- /trunk/ippconfig/sdssmosaic/ppImage.config (revision 18197) +++ /trunk/ippconfig/sdssmosaic/ppImage.config (revision 18197) @@ -0,0 +1,157 @@ +### ppImage recipe configuration file + +# Inherit everything from the top-level recipe file, except for what's below. + +PHOTCODE.RULE STR SDSS.{FILTER.ID}.{DETECTOR} + +FRINGE.FILTERS MULTI +FRINGE.FILTERS STR z +# FRINGE.FILTERS STR y + +# apply the following constraints when selecting a detrend image +DETREND.CONSTRAINTS METADATA + BIAS METADATA + END + DARK METADATA + END + SHUTTER METADATA + END + FLAT METADATA + FILTER STR FPA.FILTERID +# VERSION STR RAW + END + FRINGE METADATA + FILTER STR FPA.FILTERID +# AIRMASS STR FPA.AIRMASS +# TWILIGHT STR TWILIGHT:FPA.TIME + END + MASK METADATA + FILTER STR FPA.FILTERID + END +END + +## these science-image analysis recipes are placed here set MASK = FALSE + +# Overscan, bias, dark, shutter, flat-field, fringe, photom, astrom +PPIMAGE_DET_ONLY METADATA + BASE.FITS BOOL FALSE # Save base detrended image? + BASE.MASK.FITS BOOL FALSE # Save base detrended image? + BASE.WEIGHT.FITS BOOL FALSE # Save base detrended image? + CHIP.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.WEIGHT.FITS BOOL TRUE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL TRUE # Dark subtraction + SHUTTER BOOL TRUE # Shutter correction + FLAT BOOL TRUE # Flat-field normalisation + MASK BOOL FALSE # Mask bad pixels + FRINGE BOOL TRUE # Fringe subtraction + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? + PHOTOM BOOL FALSE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? +END + +# Overscan, bias, dark, shutter, flat-field, fringe, photom +PPIMAGE_OBDSFRP METADATA + BASE.FITS BOOL FALSE # Save base detrended image? + BASE.MASK.FITS BOOL FALSE # Save base detrended image? + BASE.WEIGHT.FITS BOOL FALSE # Save base detrended image? + CHIP.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.WEIGHT.FITS BOOL TRUE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL TRUE # Dark subtraction + SHUTTER BOOL TRUE # Shutter correction + FLAT BOOL TRUE # Flat-field normalisation + MASK BOOL FALSE # Mask bad pixels + FRINGE BOOL TRUE # Fringe subtraction + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? + PHOTOM BOOL TRUE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? +END + +# Overscan, bias, dark, shutter, flat-field, fringe, photom, astrom +PPIMAGE_OBDSFRA METADATA + BASE.FITS BOOL FALSE # Save base detrended image? + BASE.MASK.FITS BOOL FALSE # Save base detrended image? + BASE.WEIGHT.FITS BOOL FALSE # Save base detrended image? + CHIP.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.WEIGHT.FITS BOOL TRUE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL TRUE # Dark subtraction + SHUTTER BOOL TRUE # Shutter correction + FLAT BOOL TRUE # Flat-field normalisation + MASK BOOL FALSE # Mask bad pixels + FRINGE BOOL TRUE # Fringe subtraction + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? + PHOTOM BOOL TRUE # Source identification and photometry + ASTROM.CHIP BOOL TRUE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? +END + +# SDSS Softbias and photometry +PPIMAGE_OP_SOFT METADATA + BASE.FITS BOOL FALSE # Save base detrended image? + BASE.MASK.FITS BOOL FALSE # Save base detrended image? + BASE.WEIGHT.FITS BOOL FALSE # Save base detrended image? + CHIP.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL TRUE # Save base detrended image? + CHIP.WEIGHT.FITS BOOL TRUE # Save base detrended image? + OVERSCAN BOOL TRUE # Overscan subtraction + OVERSCAN.CONSTANT BOOL TRUE + OVERSCAN.VALUE F32 1000.0 + BIAS BOOL FALSE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL FALSE # Flat-field normalisation + MASK BOOL FALSE # Mask bad pixels +# To turn on masking, use the following lines: +# MASK BOOL TRUE # Mask bad pixels +# MASK.VALUE U8 1 # Bad-pixel value in my SDSS masks (see IPPwiki/stripe82) + FRINGE BOOL FALSE # Fringe subtraction + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? + BIN1.JPEG BOOL TRUE # Save 1st binned jpeg? + BIN2.JPEG BOOL TRUE # Save 2nd binned jpeg? + PHOTOM BOOL TRUE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? +END + +# SDSS Softbias, photometry, astrometry +PPIMAGE_OA_SOFT METADATA + BASE.FITS BOOL FALSE # Save base detrended image? + BASE.MASK.FITS BOOL FALSE # Save base detrended image? + BASE.WEIGHT.FITS BOOL FALSE # Save base detrended image? + CHIP.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL TRUE # Save base detrended image? + CHIP.WEIGHT.FITS BOOL TRUE # Save base detrended image? + OVERSCAN BOOL TRUE # Overscan subtraction + OVERSCAN.CONSTANT BOOL TRUE + OVERSCAN.VALUE F32 1000.0 + BIAS BOOL FALSE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL FALSE # Flat-field normalisation + MASK BOOL FALSE # Mask bad pixels +# To turn on masking, use the following lines: +# MASK BOOL TRUE # Mask bad pixels +# MASK.VALUE U8 1 # Bad-pixel value in my SDSS masks (see IPPwiki/stripe82) + FRINGE BOOL FALSE # Fringe subtraction + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? + BIN1.JPEG BOOL TRUE # Save 1st binned jpeg? + BIN2.JPEG BOOL TRUE # Save 2nd binned jpeg? + PHOTOM BOOL TRUE # Source identification and photometry + ASTROM.CHIP BOOL TRUE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? +END Index: /trunk/ippconfig/sdssmosaic/ppMerge.config =================================================================== --- /trunk/ippconfig/sdssmosaic/ppMerge.config (revision 18197) +++ /trunk/ippconfig/sdssmosaic/ppMerge.config (revision 18197) @@ -0,0 +1,3 @@ +### ppImage recipe configuration file + +# Inherit everything from the top-level recipe file, except for what's below. Index: /trunk/ippconfig/sdssmosaic/psastro.config =================================================================== --- /trunk/ippconfig/sdssmosaic/psastro.config (revision 18197) +++ /trunk/ippconfig/sdssmosaic/psastro.config (revision 18197) @@ -0,0 +1,104 @@ + +# astrometry matching parameters + +# nominal plate scale (microns / pixel) +PSASTRO.PIXEL.SCALE F32 10.0 + +# pmAstromGridMatch: +PSASTRO.GRID.MIN.ANGLE F32 -2.0 +PSASTRO.GRID.MAX.ANGLE F32 +2.0 +PSASTRO.GRID.DEL.ANGLE F32 0.25 +PSASTRO.GRID.MIN.SIGMA F32 5.0 + +# pmAstromGridAngle +# max grid offset in FP units (microns) +# use plate-scale to make this in pixels? +# PSASTRO.GRID.OFFSET F32 10000. +PSASTRO.GRID.OFFSET F32 100. +PSASTRO.GRID.SCALE F32 500 +PSASTRO.GRID.NSTAR.MAX S32 800 # max stars accepted for fitting + +PSASTRO.MAX.NRAW S32 800 # max stars accepted for fitting (0 for all) +PSASTRO.MAX.NREF S32 5000 # max stars accepted for fitting (0 for all) + +# extra field for ref stars: +PSASTRO.FIELD.PADDING F32 0.15 + +# +PSASTRO.MIN.INST.MAG.RAW F32 -15.0 # min instrumental magnitude for stars accepted for fitting +PSASTRO.MAX.INST.MAG.RAW F32 0.0 # max instrumental magnitude for stars accepted for fitting + +# +PSASTRO.GRID.MIN.ANGLE F32 -2.0 # start angle (degrees) +PSASTRO.GRID.MAX.ANGLE F32 +2.0 +PSASTRO.GRID.DEL.ANGLE F32 0.5 + +# +PSASTRO.GRID.MIN.SCALE F32 1.00 +PSASTRO.GRID.MAX.SCALE F32 1.00 +PSASTRO.GRID.DEL.SCALE F32 0.01 + +# single-chip radius match in pixels +PSASTRO.MATCH.RADIUS.N0 F32 90 +PSASTRO.MATCH.RADIUS.N1 F32 60 +PSASTRO.MATCH.RADIUS.N2 F32 30 +PSASTRO.MATCH.RADIUS.N3 F32 20 +PSASTRO.MATCH.RADIUS.N4 F32 20 +PSASTRO.MATCH.RADIUS.N5 F32 20 +PSASTRO.MATCH.RADIUS.N6 F32 10 +PSASTRO.MATCH.RADIUS.N7 F32 10 +PSASTRO.MATCH.FIT.NITER S32 8 + +# XXX Test for taurus +PSASTRO.GRID.MIN.SIGMA F32 1.0 +PSASTRO.IGNORE STR BLEND + +# these tweak are in FP units (pixels, currently) +PSASTRO.TWEAK.SCALE F32 1 +PSASTRO.TWEAK.RANGE F32 75 +PSASTRO.TWEAK.SMOOTH F32 2 +PSASTRO.TWEAK.NSIGMA F32 3 + +# This used to be true... +PSASTRO.USE.MODEL BOOL FALSE + +# PSASTRO.FIX.CHIPS BOOL TRUE +PSASTRO.PIXEL.TOLERANCE F32 20.0 +PSASTRO.ANGLE.TOLERANCE F32 1.0 + +DVO.CATDIR STR /IPP/ippRefs/catdir.2mass + +# Mosaic Astrometry options +PSASTRO.MOSAIC.MODE BOOL FALSE +# PSASTRO.MOSAIC.MAX.ERROR.N0 F32 1.80 # max allow error for valid solution (arcsec) +# PSASTRO.MOSAIC.MAX.ERROR.N1 F32 1.20 # max allow error for valid solution (arcsec) +# PSASTRO.MOSAIC.MAX.ERROR.N2 F32 0.80 # max allow error for valid solution (arcsec) +# PSASTRO.MOSAIC.MAX.ERROR.N3 F32 0.50 # max allow error for valid solution (arcsec) + +PSASTRO.MOSAIC.MAX.ERROR.N0 F32 5.00 # max allow error for valid solution (arcsec) +PSASTRO.MOSAIC.MAX.ERROR.N1 F32 5.00 # max allow error for valid solution (arcsec) +PSASTRO.MOSAIC.MAX.ERROR.N2 F32 5.00 # max allow error for valid solution (arcsec) +PSASTRO.MOSAIC.MAX.ERROR.N3 F32 5.00 # max allow error for valid solution (arcsec) + +# mosaic radius match in pixels +PSASTRO.MOSAIC.RADIUS.N0 F32 10 +PSASTRO.MOSAIC.RADIUS.N1 F32 5 +PSASTRO.MOSAIC.RADIUS.N2 F32 3 + +PSASTRO.MOSAIC.CHIP.ORDER S32 1 # limit chip-fit order to 1 +PSASTRO.MOSAIC.CHIP.ORDER.N0 S32 0 # fit order (-1 means use default) +PSASTRO.MOSAIC.CHIP.ORDER.N1 S32 0 # fit order (-1 means use default) +PSASTRO.MOSAIC.CHIP.ORDER.N2 S32 1 # fit order (-1 means use default) +PSASTRO.MOSAIC.CHIP.ORDER.N3 S32 1 # fit order (-1 means use default) + +# DVO.GETSTAR STR /home/kiawe/eugene/psconfig/dev.lin64/bin/getstar + +# we need to allow a loose fit if we are fitting to 2mass (50mas internal error -> 100mas limit?) +# if we are fitting against quality digital data, we can require tighter constraints + +PSASTRO.MODEL.REF.CHIP STR XY33 + +DVO.CATDIR STR /IPP/ippRefs/catdir.synth.grizy +# Do I need to change this photcode now that I'm using 30 SDSS photcodes? +DVO.GETSTAR.PHOTCODE STR g +DVO.GETSTAR.MAG.MAX F32 17.0 Index: /trunk/ippconfig/sdssmosaic/psphot.config =================================================================== --- /trunk/ippconfig/sdssmosaic/psphot.config (revision 18197) +++ /trunk/ippconfig/sdssmosaic/psphot.config (revision 18197) @@ -0,0 +1,72 @@ + +# turn these on to see specific outputs +SAVE.BACKMDL BOOL TRUE +#SAVE.BACKGND BOOL TRUE +#SAVE.BACKSUB BOOL TRUE +#SAVE.RESID BOOL TRUE +SAVE.PSF BOOL TRUE +SAVE.PLOTS BOOL TRUE + +# image statistics parameters +IMSTATS_NPIX S32 3000 # number of pixels to use for sky estimate boxes: + +PSF_SN_LIM F32 10 # minimum S/N for stars used for PSF model +PSF_MAX_NSTARS S32 300 # limit number of stars used for PSF model + +PSF_MODEL STR PS_MODEL_QGAUSS + +MOMENTS_SN_MIN F32 10.0 +#EXT_MIN_SN F32 50.0 # fit galaxies above this S/N limit +#FULL_FIT_SN_LIM F32 50.0 +#AP_MIN_SN F32 20.0 +MEASURE.APTREND BOOL FALSE +PSF_CLUMP_NSIGMA F32 2.5 # region of Sx,Sy plane to use for selecting PSF stars + +## # PSFTREND must be a 2D polynomial +## # the specified values are ignored but define the active components of the polynomial +## PSF.TREND.MASK METADATA +## NORDER_X S32 3 # number of x orders +## NORDER_Y S32 3 # number of y orders +## VAL_X00_Y00 F64 1 # polynomial coefficient +## +## VAL_X01_Y00 F64 1 # polynomial coefficient +## VAL_X00_Y01 F64 1 # polynomial coefficient +## +## VAL_X02_Y00 F64 1 # polynomial coefficient +## VAL_X01_Y01 F64 1 # polynomial coefficient +## VAL_X00_Y02 F64 1 # polynomial coefficient +## +## VAL_X03_Y00 F64 1 # polynomial coefficient +## VAL_X02_Y01 F64 1 # polynomial coefficient +## VAL_X01_Y02 F64 1 # polynomial coefficient +## VAL_X00_Y03 F64 1 # polynomial coefficient +## NELEMENTS S32 10 # number of unmasked components +## END # folder for 4D polynomial + +XMIN F32 15 + +PSF.RESIDUALS BOOL true +PSF.RESIDUALS.SPATIAL_ORDER S32 1 + +# The parameter BREAK_POINT stopped the analysis after first linear +# fit to sources. Should be NONE or commented out. +# BREAK_POINT STR ENSEMBLE +OUTPUT.FORMAT STR PS1_DEV_0 + +PSPHOT.SUMMIT METADATA + PEAKS_SMOOTH_SIGMA F32 0.8 # peak significance threshold + PEAKS_NSIGMA_LIMIT F32 50.0 # peak significance threshold + PEAKS_NMAX S32 1000 + SAVE.RESID BOOL FALSE + PSF_SN_LIM F32 25 # minimum S/N for stars used for PSF model + MOMENTS_SN_MIN F32 25.0 + PSF_MODEL STR PS_MODEL_PGAUSS +END + +# Turn on use of footprints to avoid objectcs being found in +# diffraction spikes etc. of bright stars +USE_FOOTPRINTS BOOL T # use new pmFootprint peak packaging + +# Set aperture correction radius to same 7.4" as SDSS (see EDR paper) +PSF_REF_RADIUS F32 18.7 # aperture magnitudes are scaled via + # curve-of-growth to this radius Index: /trunk/ippconfig/sdssmosaic/pswarp.config =================================================================== --- /trunk/ippconfig/sdssmosaic/pswarp.config (revision 18197) +++ /trunk/ippconfig/sdssmosaic/pswarp.config (revision 18197) @@ -0,0 +1,14 @@ +### Recipe for pswarp + +GRID.NX S32 128 # Iso-astrom grid size in x (pixels) +GRID.NY S32 128 # Iso-astrom grid size in y (pixels) +INTERPOLATION.MODE STR LANCZOS3 # Interpolation mode to use +MASK.IN STR BAD,SAT # Mask for input data +MASK.POOR STR SUSPECT # Mask for "poor" warped data +MASK.BAD STR BLANK # Mask for bad warped data +POOR.FRAC F32 0.01 # Max fraction of bad flux for a "poor" warped pixel +ASTROM.SOURCE STR PSASTRO.OUTPUT # Source file rule for astrometry, or NULL +#ASTROM.SOURCE STR NULL # Source file rule for astrometry, or NULL +ASTROM.ACCEPT BOOL TRUE # Accept astrometric solution unconditionally? +ASTROM.DEPTH STR SPLIT # Source file rule for astrometry, or NULL +ACCEPT.FRAC F32 0.1 # Minimum fraction of good pixels to accept result Index: /trunk/ippconfig/sdssmosaic/rejections.config =================================================================== --- /trunk/ippconfig/sdssmosaic/rejections.config (revision 18197) +++ /trunk/ippconfig/sdssmosaic/rejections.config (revision 18197) @@ -0,0 +1,45 @@ + +DARK METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.STDEV F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.FLUX F32 2.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.STDEV F32 0.0 + EXP.BIN.SN F32 0.0 + EXP.FLUX F32 2.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 3.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +FRINGE METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 0.0 + IMFILE.STDEV F32 0.0 + IMFILE.MEANSTDEV F32 0.0 + IMFILE.SN F32 0.0 + IMFILE.BIN.STDEV F32 0.0 + IMFILE.BIN.SN F32 0.0 + IMFILE.FLUX F32 0.0 + EXP.MEAN F32 0.0 + EXP.STDEV F32 0.0 + EXP.MEANSTDEV F32 0.0 + EXP.SN F32 0.0 + EXP.BIN.STDEV F32 0.0 + EXP.BIN.SN F32 10.0 + EXP.FLUX F32 0.0 + ENSEMBLE.MEAN F32 0.0 + ENSEMBLE.STDEV F32 0.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END +