Index: /trunk/ippconfig/lbc_red/camera.config =================================================================== --- /trunk/ippconfig/lbc_red/camera.config (revision 19900) +++ /trunk/ippconfig/lbc_red/camera.config (revision 19901) @@ -3,5 +3,5 @@ # File formats that we know about FORMATS METADATA - MEF STR lbc_red/format.config + MEF STR lbc_red/format_mef.config END @@ -17,4 +17,5 @@ FILTER.ID METADATA Y STR Y-FAN + Y STR Y-FAN(?) END Index: unk/ippconfig/lbc_red/format.config =================================================================== --- /trunk/ippconfig/lbc_red/format.config (revision 19900) +++ (revision ) @@ -1,154 +1,0 @@ -# LBCred format.config, copied from MegaCam format_mef.config -# Like Megacam, LBC has an FPA in a multi-extension fits file, with one chip per extension - - -# How to recognise this type -RULE METADATA - TELESCOP STR LBT-DX - INSTRUME STR LBC-RED - NAXIS S32 0 - EXTEND BOOL T -END - -FILE METADATA - # How to read this data - PHU STR FPA # The FITS file represents an entire FPA - EXTENSIONS STR CHIP # The extensions represent chips - FPA.OBS STR OBS_ID # A PHU keyword for unique identifier - CHIP.NAME STR EXTNAME # An extension keyword for unique identifie -END - -# What's in the FITS file? -CONTENTS METADATA - # Extension name, chipName:chipType - LBCCHIP1 STR CHIP1:Chip - LBCCHIP2 STR CHIP2:Chip - LBCCHIP3 STR CHIP3:Chip - LBCCHIP4 STR CHIP4:Chip -END - -# Specify the chips -CHIPS METADATA - # Chip type, cellName:cellType - Chip STR Cell:Cell -END - - -# Specify the cells -CELLS METADATA - # Cell type, concepts to use - Cell METADATA - CELL.BIASSEC.SOURCE STR HEADER - CELL.TRIMSEC.SOURCE STR HEADER - CELL.BIASSEC STR BIASSEC - CELL.TRIMSEC STR TRIMSEC - # Not sure about these... - CELL.X0 S32 0 - CELL.Y0 S32 0 - CELL.GAIN.SOURCE STR HEADER - CELL.GAIN STR GAIN - END -END - -# How to translate PS concepts into FITS headers -TRANSLATION METADATA - FPA.AIRMASS STR AIRMASS - FPA.FILTERID STR FILTER - FPA.FILTER STR FILTER - FPA.POSANGLE STR ROTANGLE - FPA.RA STR OBSRA - FPA.DEC STR OBSDEC - FPA.RADECSYS STR RADECSYS - FPA.OBSTYPE STR IMAGETYPE - FPA.OBJECT STR OBJECT - FPA.FOCUS STR Z4 # ??? - FPA.TIME STR MJD_OBS -# FPA.TIMESYS STR TIMESYS - FPA.ALT STR TELALT - FPA.AZ STR TELAZ - FPA.TEMP STR CCDTEM - FPA.EXPOSURE STR EXPTIME - CHIP.TEMP STR DETTEM - CELL.EXPOSURE STR EXPTIME - CELL.DARKTIME STR EXPTIME - CELL.READNOISE STR RDNOISE - CELL.TIME STR MJD_OBS -# CELL.TIMESYS STR TIMESYS - CELL.XBIN STR LBCBIN - CELL.YBIN STR LBCBIN - CELL.SATURATION STR SATURATE -END - -# Default PS concepts that may be specified by value -DEFAULTS METADATA - FPA.TELESCOPE STR LBT-DX - FPA.INSTRUMENT STR LBC-RED # this value is used in ipprc.config to find the recipes - FPA.DETECTOR STR LBC-RED - CELL.TIMESYS STR UTC - FPA.TIMESYS STR UTC - CHIP.XSIZE S32 2048 - CHIP.YSIZE S32 4608 - CELL.XSIZE S32 2048 - CELL.YSIZE S32 4608 - CELL.XWINDOW S32 0 - CELL.YWINDOW S32 0 - CELL.READDIR S32 1 # Cell is read in x direction - CELL.SATURATION F32 65536.0 - CELL.BAD F32 0 - CELL.XPARITY S32 1 - CELL.YPARITY S32 1 - CHIP.X0.DEPEND STR CHIP.NAME - # Do the x0, y0 positions need to account for the gaps??? - # How do I specify rotation? - # - # LBC layout is - # - # 444444444 - # 444444444 - # 444444444 - # - # 333 222 111 - # 333 222 111 - # 333 222 111 - # 333 222 111 - # 333 222 111 - # 333 222 111 - # - CHIP.X0 METADATA - CHIP1 S32 4096 - CHIP2 S32 2048 - CHIP3 S32 0 - # This is probably wrong! - CHIP4 S32 1024 - END - CHIP.Y0.DEPEND STR CHIP.NAME - CHIP.Y0 METADATA - CHIP1 S32 0 - CHIP2 S32 0 - CHIP3 S32 0 - CHIP4 S32 4608 - END - CHIP.XPARITY S32 1 - CHIP.YPARITY S32 1 -END - - -# How to translation PS concepts into database lookups -DATABASE METADATA - TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS -# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME -# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME - -# A database entry refers to a particular column (COLUMN) in a -# particular table (TABLE), given certain PS concepts (GIVENPS) that -# match certain database columns (GIVENDBCOL). -END - -# Where there might be some ambiguity, specify the format -FORMATS METADATA - FPA.RA STR HOURS - FPA.DEC STR DEGREES - FPA.TIME STR MJD - CELL.TIME STR MJD -END - Index: /trunk/ippconfig/lbc_red/format_mef.config =================================================================== --- /trunk/ippconfig/lbc_red/format_mef.config (revision 19901) +++ /trunk/ippconfig/lbc_red/format_mef.config (revision 19901) @@ -0,0 +1,155 @@ +# LBCred format.config, copied from MegaCam format_mef.config +# Like Megacam, LBC has an FPA in a multi-extension fits file, with one chip per extension + + +# How to recognise this type +RULE METADATA + TELESCOP STR LBT-DX + INSTRUME STR LBC-RED + NAXIS S32 0 + EXTEND BOOL T + NEXTEND S32 4 +END + +FILE METADATA + # How to read this data + PHU STR FPA # The FITS file represents an entire FPA + EXTENSIONS STR CHIP # The extensions represent chips + FPA.OBS STR OBS_ID # A PHU keyword for unique identifier + CHIP.NAME STR EXTNAME # An extension keyword for unique identifie +END + +# What's in the FITS file? +CONTENTS METADATA + # Extension name, chipName:chipType + LBCCHIP1 STR CHIP1:Chip + LBCCHIP2 STR CHIP2:Chip + LBCCHIP3 STR CHIP3:Chip + LBCCHIP4 STR CHIP4:Chip +END + +# Specify the chips +CHIPS METADATA + # Chip type, cellName:cellType + Chip STR Cell:Cell +END + + +# Specify the cells +CELLS METADATA + # Cell type, concepts to use + Cell METADATA + CELL.BIASSEC.SOURCE STR HEADER + CELL.TRIMSEC.SOURCE STR HEADER + CELL.BIASSEC STR BIASSEC + CELL.TRIMSEC STR TRIMSEC + # Not sure about these... + CELL.X0 S32 0 + CELL.Y0 S32 0 + CELL.GAIN.SOURCE STR HEADER + CELL.GAIN STR GAIN + END +END + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.AIRMASS STR AIRMASS + FPA.FILTERID STR FILTER + FPA.FILTER STR FILTER + FPA.POSANGLE STR ROTANGLE + FPA.RA STR OBSRA + FPA.DEC STR OBSDEC + FPA.RADECSYS STR RADECSYS + FPA.OBSTYPE STR IMAGETYPE + FPA.OBJECT STR OBJECT + FPA.FOCUS STR Z4 # ??? + FPA.TIME STR MJD_OBS +# FPA.TIMESYS STR TIMESYS + FPA.ALT STR TELALT + FPA.AZ STR TELAZ + FPA.TEMP STR CCDTEM + FPA.EXPOSURE STR EXPTIME + CHIP.TEMP STR DETTEM + CELL.EXPOSURE STR EXPTIME + CELL.DARKTIME STR EXPTIME + CELL.READNOISE STR RDNOISE + CELL.TIME STR MJD_OBS +# CELL.TIMESYS STR TIMESYS + CELL.XBIN STR LBCBIN + CELL.YBIN STR LBCBIN + CELL.SATURATION STR SATURATE +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA + FPA.TELESCOPE STR LBT-DX + FPA.INSTRUMENT STR LBC-RED # this value is used in ipprc.config to find the recipes + FPA.DETECTOR STR LBC-RED + CELL.TIMESYS STR UTC + FPA.TIMESYS STR UTC + CHIP.XSIZE S32 2048 + CHIP.YSIZE S32 4608 + CELL.XSIZE S32 2048 + CELL.YSIZE S32 4608 + CELL.XWINDOW S32 0 + CELL.YWINDOW S32 0 + CELL.READDIR S32 1 # Cell is read in x direction + CELL.SATURATION F32 65536.0 + CELL.BAD F32 0 + CELL.XPARITY S32 1 + CELL.YPARITY S32 1 + CHIP.X0.DEPEND STR CHIP.NAME + # Do the x0, y0 positions need to account for the gaps??? + # How do I specify rotation? + # + # LBC layout is + # + # 444444444 + # 444444444 + # 444444444 + # + # 333 222 111 + # 333 222 111 + # 333 222 111 + # 333 222 111 + # 333 222 111 + # 333 222 111 + # + CHIP.X0 METADATA + CHIP1 S32 4096 + CHIP2 S32 2048 + CHIP3 S32 0 + # This is probably wrong! + CHIP4 S32 1024 + END + CHIP.Y0.DEPEND STR CHIP.NAME + CHIP.Y0 METADATA + CHIP1 S32 0 + CHIP2 S32 0 + CHIP3 S32 0 + CHIP4 S32 4608 + END + CHIP.XPARITY S32 1 + CHIP.YPARITY S32 1 +END + + +# How to translation PS concepts into database lookups +DATABASE METADATA + TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS +# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME +# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME + +# A database entry refers to a particular column (COLUMN) in a +# particular table (TABLE), given certain PS concepts (GIVENPS) that +# match certain database columns (GIVENDBCOL). +END + +# Where there might be some ambiguity, specify the format +FORMATS METADATA + FPA.RA STR HOURS + FPA.DEC STR DEGREES + FPA.TIME STR MJD + CELL.TIME STR MJD +END +