Index: trunk/psLib/test/Makefile =================================================================== --- trunk/psLib/test/Makefile (revision 2309) +++ trunk/psLib/test/Makefile (revision 3115) @@ -1,106 +1,468 @@ -############################################################################## -## -## Makefile: test -## -## $Revision: 1.10 $ $Name: not supported by cvs2svn $ -## $Date: 2004-11-09 01:10:38 $ -## -## Copyright 2004 Maui High Performance Computing Center, University of Hawaii -############################################################################### - -# Define variable prefix to the top level project - psLib -# This is necessary for definition is Makefile.Globals uses prefix - -ifndef prefix - export prefix=$(shell cd ..;pwd) -endif - -# Define the two targets to be built - -TARGET_STATIC = libpstest.a -TARGET_DYNAMIC = libpstest.$(DLL) - -# Include the make global definitions for the project - -include ../src/Makefile.Globals - -# Set CFLAGS used by the implicit rule to compile .c - -CFLAGS := $(CFLAGS_RELOC) -I../include - -# Define the source objects - -SRC_OBJS = psTest.o - -# Define PHONY target "all" which will make all the necessary items - -all: $(TARGET_STATIC) $(TARGET_DYNAMIC) - -# Rule to make static library - -libpstest.a: $(SRC_OBJS) -# The ar option -r is to add/replace object and -s is to create -# a symbol table in the archive - $(AR) rcs $@ $(SRC_OBJS) - -# Rule to make dynamic library - -libpstest.$(DLL): $(SRC_OBJS) - $(CC) $(LDFLAGS_DLL) -L../lib -lpslib $(SRC_OBJS) -o $@ - -# Define PHONY target "install" which will install necessary files - -install: $(TARGET_STATIC) $(TARGET_DYNAMIC) $(includedir) $(libexecdir) $(testbindir) - install *.h $(includedir) - install $(TARGET_STATIC) $(libexecdir) - install $(TARGET_DYNAMIC) $(libexecdir) - install FullUnitTest runTest $(testbindir) - $(MAKE) --directory=collections install - $(MAKE) --directory=image install - $(MAKE) --directory=dataManip install - $(MAKE) --directory=sysUtils install - $(MAKE) --directory=astronomy install - $(MAKE) --directory=fileUtils install - -# Define PHONY target "distclean" which will cleanup the distribution - -distclean: clean - $(MAKE) --directory=collections distclean - $(MAKE) --directory=image distclean - $(MAKE) --directory=dataManip distclean - $(MAKE) --directory=sysUtils distclean - $(MAKE) --directory=astronomy distclean - $(MAKE) --directory=fileUtils distclean - $(RM) $(TARGET_STATIC) - $(RM) $(TARGET_DYNAMIC) - $(RM) $(libexecdir)/$(TARGET_STATIC) - $(RM) $(libexecdir)/$(TARGET_DYNAMIC) - -# Define PHONY target "clean" which will cleanup the development area - -clean: - $(MAKE) --directory=collections clean - $(MAKE) --directory=image clean - $(MAKE) --directory=dataManip clean - $(MAKE) --directory=sysUtils clean - $(MAKE) --directory=astronomy clean - $(MAKE) --directory=fileUtils clean - @echo " Deleting intermediate files for 'test'" - $(RM) $(SRC_OBJS) *.lint - -%.lint: %.c - splint +posixlib -exportlocal -realcompare $(INCLUDE_GLOBAL) $? > $@; cat $@ - -# Rule to make include directory if needed - -$(includedir): - mkdir -p $(includedir) - -# Rule to make lib directory if needed - -$(libexecdir): - mkdir -p $(libexecdir) - -$(testbindir): - mkdir -p $(testbindir) - +# Makefile.in generated by automake 1.9.1 from Makefile.am. +# test/Makefile. Generated from Makefile.in by configure. + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +srcdir = . +top_srcdir = .. + +pkgdatadir = $(datadir)/pslib +pkglibdir = $(libdir)/pslib +pkgincludedir = $(includedir)/pslib +top_builddir = .. +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = /usr/bin/install -c +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = x86_64-unknown-linux-gnu +host_triplet = x86_64-unknown-linux-gnu +subdir = test +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-exec-recursive install-info-recursive \ + install-recursive installcheck-recursive installdirs-recursive \ + pdf-recursive ps-recursive uninstall-info-recursive \ + uninstall-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = ${SHELL} /home/desonia/panstarrs/psLib/missing --run aclocal-1.9 +AMDEP_FALSE = # +AMDEP_TRUE = +AMTAR = ${SHELL} /home/desonia/panstarrs/psLib/missing --run tar +AR = ar +AUTOCONF = ${SHELL} /home/desonia/panstarrs/psLib/missing --run autoconf +AUTOHEADER = ${SHELL} /home/desonia/panstarrs/psLib/missing --run autoheader +AUTOMAKE = ${SHELL} /home/desonia/panstarrs/psLib/missing --run automake-1.9 +AWK = gawk +CC = gcc +CCDEPMODE = depmode=gcc3 +CFLAGS = -g -O2 -g2 -Wall -std=c99 -D_GNU_SOURCE -I/usr/include -I/usr/include/libxml2 +CONFIG_FILE = /home/desonia/panstarrs/psLib/config/psTime.config +CPP = gcc -E +CPPFLAGS = +CXX = g++ +CXXCPP = g++ -E +CXXDEPMODE = depmode=gcc3 +CXXFLAGS = -g -O2 +CYGPATH_W = echo +DEFS = -DHAVE_CONFIG_H +DEPDIR = .deps +ECHO = echo +ECHO_C = +ECHO_N = -n +ECHO_T = +EGREP = grep -E +EXEEXT = +F77 = g77 +FFLAGS = -fno-second-underscore -O -fno-f2c +GSL_CONFIG = /usr/bin/gsl-config +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_PROGRAM = ${INSTALL} +INSTALL_SCRIPT = ${INSTALL} +INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s +LDFLAGS = +LIBOBJS = +LIBS = +LIBTOOL = $(SHELL) $(top_builddir)/libtool +LN_S = ln -s +LTLIBOBJS = +MAKEINFO = ${SHELL} /home/desonia/panstarrs/psLib/missing --run makeinfo +OBJEXT = o +PACKAGE = pslib +PACKAGE_BUGREPORT = +PACKAGE_NAME = +PACKAGE_STRING = +PACKAGE_TARNAME = +PACKAGE_VERSION = +PATH_SEPARATOR = : +PERL = /usr/bin/perl +PSLIB_CFLAGS = -I${prefix}/include +PSLIB_LIBS = -L${exec_prefix}/lib -lpslib -lcfitsio -lfftw3f -L/usr/lib64 -lgsl -lgslcblas -lm -lxml2 -lz -lpthread -lm +RANLIB = ranlib +SET_MAKE = +SHELL = /bin/sh +STRIP = strip +SWIG = /usr/bin/swig +VERSION = 1.5 +XML_CONFIG = /usr/bin/xml2-config +ac_ct_AR = ar +ac_ct_CC = gcc +ac_ct_CXX = g++ +ac_ct_F77 = g77 +ac_ct_RANLIB = ranlib +ac_ct_STRIP = strip +am__fastdepCC_FALSE = # +am__fastdepCC_TRUE = +am__fastdepCXX_FALSE = # +am__fastdepCXX_TRUE = +am__include = include +am__leading_dot = . +am__quote = +am__tar = ${AMTAR} chof - "$$tardir" +am__untar = ${AMTAR} xf - +bindir = ${exec_prefix}/bin +build = x86_64-unknown-linux-gnu +build_alias = +build_cpu = x86_64 +build_os = linux-gnu +build_vendor = unknown +datadir = ${prefix}/share +exec_prefix = ${prefix} +host = x86_64-unknown-linux-gnu +host_alias = +host_cpu = x86_64 +host_os = linux-gnu +host_vendor = unknown +includedir = ${prefix}/include +infodir = ${prefix}/info +install_sh = /home/desonia/panstarrs/psLib/install-sh +libdir = ${exec_prefix}/lib +libexecdir = ${exec_prefix}/libexec +localstatedir = ${prefix}/var +mandir = ${prefix}/man +mkdir_p = mkdir -p -- +oldincludedir = /usr/include +prefix = /home/desonia/panstarrs/psLib +program_transform_name = s,x,x, +sbindir = ${exec_prefix}/sbin +sharedstatedir = ${prefix}/com +sysconfdir = ${prefix}/etc +target_alias = + +# not a GNU package. You can remove this line, if +# have all needed files, that a GNU package needs +AUTOMAKE_OPTIONS = foreign 1.4 +SUBDIRS = astronomy collections dataManip fileUtils image sysUtils +EXTRA_DIST = runTest FullUnitTest +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign test/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-libtool \ + distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-recursive + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-info-am + +uninstall-info: uninstall-info-recursive + +.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ + clean clean-generic clean-libtool clean-recursive ctags \ + ctags-recursive distclean distclean-generic distclean-libtool \ + distclean-recursive distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-man install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic maintainer-clean-recursive \ + mostlyclean mostlyclean-generic mostlyclean-libtool \ + mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am uninstall-info-am + + +tests: +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: