Index: anches/haf_branches/ppimage2011/psvideophot/Doxyfile =================================================================== --- /branches/haf_branches/ppimage2011/psvideophot/Doxyfile (revision 31548) +++ (revision ) @@ -1,1310 +1,0 @@ -# Doxyfile 1.5.4 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project -# -# All text after a hash (#) is considered a comment and will be ignored -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" ") - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file that -# follow. The default is UTF-8 which is also the encoding used for all text before -# the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into -# libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of -# possible encodings. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. - -PROJECT_NAME = ppImage - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - -PROJECT_NUMBER = ipp-2.7.dev - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - -OUTPUT_DIRECTORY = ./docs - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would -# otherwise cause performance problems for the file system. - -CREATE_SUBDIRS = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, -# Italian, Japanese, Japanese-en (Japanese with English messages), Korean, -# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, -# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" -# "represents" "a" "an" "the" - -ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - -FULL_PATH_NAMES = NO - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems -# doesn't support long names like on DOS, Mac, or CD-ROM. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments -# (thus requiring an explicit @brief command for a brief description.) - -JAVADOC_AUTOBRIEF = NO - -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring -# an explicit \brief command for a brief description.) - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the DETAILS_AT_TOP tag is set to YES then Doxygen -# will output the detailed description near the top, like JavaDoc. -# If set to NO, the detailed description appears after the member -# documentation. - -DETAILS_AT_TOP = NO - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will -# be part of the file/class/namespace that contains it. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - -TAB_SIZE = 4 - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = NO - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for Java. -# For instance, namespaces will be presented as packages, qualified scopes -# will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = NO - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to -# include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public -# instead of private inheritance when no explicit protection keyword is present. - -SIP_SUPPORT = NO - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. - -SUBGROUPING = YES - -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct (or union) is -# documented as struct with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code where the coding convention is that all structs are -# typedef'ed and only the typedef is referenced never the struct's name. - -TYPEDEF_HIDES_STRUCT = NO - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - -EXTRACT_ALL = NO - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - -EXTRACT_STATIC = NO - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be extracted -# and appear in the documentation as a namespace called 'anonymous_namespace{file}', -# where file will be replaced with the base name of the file that contains the anonymous -# namespace. By default anonymous namespace are hidden. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. - -CASE_SENSE_NAMES = YES - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - -HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. - -SHOW_INCLUDE_FILES = YES - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. - -SORT_BRIEF_DOCS = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. - -SORT_BY_SCOPE_NAME = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - -GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - -SHOW_USED_FILES = YES - -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from the -# version control system). Doxygen will invoke the program by executing (via -# popen()) the command , where is the value of -# the FILE_VERSION_FILTER tag, and is the name of an input file -# provided by doxygen. Whatever the program writes to standard output -# is used as the file version. See the manual for examples. - -FILE_VERSION_FILTER = - -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - -WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - -WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be abled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of -# documentation. - -WARN_NO_PARAMDOC = NO - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could -# be obtained via FILE_VERSION_FILTER) - -WARN_FORMAT = "$file:$line: $text " - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - -INPUT = ./src - -# This tag can be used to specify the character encoding of the source files that -# doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default -# input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding. -# See http://www.gnu.org/software/libiconv for the list of possible encodings. - -INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx -# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 - -FILE_PATTERNS = *.h - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - -RECURSIVE = YES - -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. - -EXCLUDE = - -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or -# directories that are symbolic links (a Unix filesystem feature) are excluded -# from the input. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories -# for example use the pattern */test/* - -EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the output. -# The symbol name can be a fully qualified name, a word, or if the wildcard * is used, -# a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test - -EXCLUDE_SYMBOLS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command , where -# is the value of the INPUT_FILTER tag, and is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. If FILTER_PATTERNS is specified, this tag will be -# ignored. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER -# is applied to all files. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - -FILTER_SOURCE_FILES = NO - -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. If you have enabled CALL_GRAPH or CALLER_GRAPH -# then you must also enable this option. If you don't then doxygen will produce -# a warning and turn it on anyway - -SOURCE_BROWSER = NO - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. - -STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES (the default) -# then for each documented function all documented -# functions referencing it will be listed. - -REFERENCED_BY_RELATION = YES - -# If the REFERENCES_RELATION tag is set to YES (the default) -# then for each documented function all documented entities -# called/used by that function will be listed. - -REFERENCES_RELATION = YES - -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will -# link to the source code. Otherwise they will link to the documentstion. - -REFERENCES_LINK_SOURCE = YES - -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You -# will need version 4.8.6 or higher. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - -VERBATIM_HEADERS = YES - -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - -ALPHABETICAL_INDEX = NO - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# stylesheet in the HTML output directory as well, or it will be erased! - -HTML_STYLESHEET = - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) -# of the generated HTML documentation. - -GENERATE_HTMLHELP = NO - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). - -HTML_DYNAMIC_SECTIONS = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output directory. - -CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. - -HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - -GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. - -TOC_EXPAND = NO - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. - -DISABLE_INDEX = NO - -# This tag can be used to set the number of enum values (range [1..20]) -# that doxygen will group on one line in the generated HTML documentation. - -ENUM_VALUES_PER_LINE = 4 - -# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be -# generated containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, -# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are -# probably better off using the HTML help feature. - -GENERATE_TREEVIEW = NO - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - -TREEVIEW_WIDTH = 250 - -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - -GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and -# executive. If left blank a4wide will be used. - -PAPER_TYPE = a4wide - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - -PDF_HYPERLINKS = NO - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - -USE_PDFLATEX = NO - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - -LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - -LATEX_HIDE_INDICES = NO - -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - -RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - -RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - -RTF_EXTENSIONS_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - -GENERATE_MAN = YES - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - -MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - -MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - -MAN_LINKS = NO - -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. - -GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - -XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - -XML_PROGRAMLISTING = YES - -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# configuration options related to the Perl module output -#--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - -GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - -PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. This is useful -# if you want to understand what is going on. On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - -PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - -PERLMOD_MAKEVAR_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - -MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_DEFINED tags. - -EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# in the INCLUDE_PATH (see below) will be search if a #include is found. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - -INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator -# instead of the = operator. - -PREDEFINED = - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse -# the parser if not removed. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen -# is run, you must also specify the path to the tagfile here. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - -EXTERNAL_GROUPS = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - -PERL_PATH = /usr/bin/perl - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option is superseded by the HAVE_DOT option below. This is only a -# fallback. It is recommended to install and use dot, since it yields more -# powerful graphs. - -CLASS_DIAGRAMS = YES - -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to -# produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to -# specify the directory where the mscgen tool resides. If left empty the tool is assumed to -# be found in the default search path. - -MSCGEN_PATH = - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - -HIDE_UNDOC_RELATIONS = YES - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - -HAVE_DOT = NO - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. - -CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - -COLLABORATION_GRAPH = YES - -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for groups, showing the direct groups dependencies - -GROUP_GRAPHS = YES - -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. - -UML_LOOK = NO - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - -TEMPLATE_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - -INCLUDE_GRAPH = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - -INCLUDED_BY_GRAPH = YES - -# If the CALL_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will -# generate a call dependency graph for every global function or class method. -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. - -CALL_GRAPH = NO - -# If the CALLER_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will -# generate a caller dependency graph for every global function or class method. -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. - -CALLER_GRAPH = NO - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will graphical hierarchy of all classes instead of a textual one. - -GRAPHICAL_HIERARCHY = YES - -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include -# relations between the files in the directories. - -DIRECTORY_GRAPH = YES - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif -# If left blank png will be used. - -DOT_IMAGE_FORMAT = png - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - -DOTFILE_DIRS = - -# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the number -# of direct children of the root node in a graph is already larger than -# MAX_DOT_GRAPH_NOTES then the graph will not be shown at all. Also note -# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. - -DOT_GRAPH_MAX_NODES = 50 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by -# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. - -MAX_DOT_GRAPH_DEPTH = 0 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, which results in a white background. -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to -# read). - -DOT_TRANSPARENT = NO - -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) -# support this, this feature is disabled by default. - -DOT_MULTI_TARGETS = NO - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. - -DOT_CLEANUP = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to the search engine -#--------------------------------------------------------------------------- - -# The SEARCHENGINE tag specifies whether or not a search engine should be -# used. If set to NO the values of all tags below this one will be ignored. - -SEARCHENGINE = NO Index: anches/haf_branches/ppimage2011/psvideophot/Makefile.in =================================================================== --- /branches/haf_branches/ppimage2011/psvideophot/Makefile.in (revision 31548) +++ (revision ) @@ -1,631 +1,0 @@ -# Makefile.in generated by automake 1.10 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = . -DIST_COMMON = $(am__configure_deps) $(srcdir)/Doxyfile.in \ - $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(top_srcdir)/configure config.guess config.sub depcomp \ - install-sh ltmain.sh missing -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/src/config.h -CONFIG_CLEAN_FILES = Doxyfile -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } -DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 -GZIP_ENV = --best -distuninstallcheck_listfiles = find . -type f -print -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PPSTATS_CFLAGS = @PPSTATS_CFLAGS@ -PPSTATS_LIBS = @PPSTATS_LIBS@ -PSASTRO_CFLAGS = @PSASTRO_CFLAGS@ -PSASTRO_LIBS = @PSASTRO_LIBS@ -PSLIB_CFLAGS = @PSLIB_CFLAGS@ -PSLIB_LIBS = @PSLIB_LIBS@ -PSMODULE_CFLAGS = @PSMODULE_CFLAGS@ -PSMODULE_LIBS = @PSMODULE_LIBS@ -PSPHOT_CFLAGS = @PSPHOT_CFLAGS@ -PSPHOT_LIBS = @PSPHOT_LIBS@ -PSVIDEOPHOT_CFLAGS = @PSVIDEOPHOT_CFLAGS@ -PSVIDEOPHOT_LIBS = @PSVIDEOPHOT_LIBS@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SVN = @SVN@ -SVNVERSION = @SVNVERSION@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = src -CLEANFILES = *~ core core.* -all: all-recursive - -.SUFFIXES: -am--refresh: - @: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ - cd $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in - cd $(top_builddir) && $(SHELL) ./config.status $@ - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d $(distdir) || mkdir $(distdir) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - distdir) \ - || exit 1; \ - fi; \ - done - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -dist-tarZ: distdir - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) - -dist-shar: distdir - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) - -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst - chmod a-w $(distdir) - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && cd $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck - $(am__remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @cd $(distuninstallcheck_dir) \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-libtool \ - distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-exec-am: - -install-html: install-html-recursive - -install-info: install-info-recursive - -install-man: - -install-pdf: install-pdf-recursive - -install-ps: install-ps-recursive - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am am--refresh check check-am clean clean-generic \ - clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ - dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \ - distclean-generic distclean-libtool distclean-tags \ - distcleancheck distdir distuninstallcheck dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: Index: anches/haf_branches/ppimage2011/psvideophot/src/Makefile =================================================================== --- /branches/haf_branches/ppimage2011/psvideophot/src/Makefile (revision 31548) +++ (revision ) @@ -1,682 +1,0 @@ -# Makefile.in generated by automake 1.10 from Makefile.am. -# src/Makefile. Generated from Makefile.in by configure. - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - - - -pkgdatadir = $(datadir)/psvideophot -pkglibdir = $(libdir)/psvideophot -pkgincludedir = $(includedir)/psvideophot -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = x86_64-unknown-linux-gnu -host_triplet = x86_64-unknown-linux-gnu -bin_PROGRAMS = psvideophot$(EXEEXT) -subdir = src -DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/config.h.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -PROGRAMS = $(bin_PROGRAMS) -am_psvideophot_OBJECTS = psvideophot-psvideophot.$(OBJEXT) \ - psvideophot-psvideophotArguments.$(OBJEXT) \ - psvideophot-psvideophotParseCamera.$(OBJEXT) \ - psvideophot-psvideophotOptions.$(OBJEXT) \ - psvideophot-psvideophotCleanup.$(OBJEXT) \ - psvideophot-psvideophotDefineFile.$(OBJEXT) \ - psvideophot-psvideoLoop.$(OBJEXT) \ - psvideophot-psvideophotFileCheck.$(OBJEXT) \ - psvideophot-psvideophotVersion.$(OBJEXT) -psvideophot_OBJECTS = $(am_psvideophot_OBJECTS) -psvideophot_LDADD = $(LDADD) -psvideophot_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(psvideophot_CFLAGS) \ - $(CFLAGS) $(psvideophot_LDFLAGS) $(LDFLAGS) -o $@ -DEFAULT_INCLUDES = -I. -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -SOURCES = $(psvideophot_SOURCES) -DIST_SOURCES = $(psvideophot_SOURCES) -HEADERS = $(noinst_HEADERS) -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = ${SHELL} /data/ippc18.0/home/heather/ipp-ppimage2011/psvideophot/missing --run aclocal-1.10 -AMTAR = ${SHELL} /data/ippc18.0/home/heather/ipp-ppimage2011/psvideophot/missing --run tar -AR = ar -AUTOCONF = ${SHELL} /data/ippc18.0/home/heather/ipp-ppimage2011/psvideophot/missing --run autoconf -AUTOHEADER = ${SHELL} /data/ippc18.0/home/heather/ipp-ppimage2011/psvideophot/missing --run autoheader -AUTOMAKE = ${SHELL} /data/ippc18.0/home/heather/ipp-ppimage2011/psvideophot/missing --run automake-1.10 -AWK = gawk -CC = gcc -std=gnu99 -CCDEPMODE = depmode=gcc3 -CFLAGS = -pipe -O0 -g -Wall -Werror -CPP = gcc -E -CPPFLAGS = -CYGPATH_W = echo -DEFS = -DHAVE_CONFIG_H -DEPDIR = .deps -DSYMUTIL = -DUMPBIN = -ECHO_C = -ECHO_N = -n -ECHO_T = -EGREP = /bin/grep -E -EXEEXT = -FGREP = /bin/grep -F -GREP = /bin/grep -INSTALL = /usr/bin/install -c -INSTALL_DATA = ${INSTALL} -m 644 -INSTALL_PROGRAM = ${INSTALL} -INSTALL_SCRIPT = ${INSTALL} -INSTALL_STRIP_PROGRAM = $(install_sh) -c -s -LD = /usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64 -LDFLAGS = -LIBOBJS = -LIBS = -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LIPO = -LN_S = ln -s -LTLIBOBJS = -MAINT = -MAKEINFO = ${SHELL} /data/ippc18.0/home/heather/ipp-ppimage2011/psvideophot/missing --run makeinfo -MKDIR_P = /usr/bin/mkdir -p -NM = /usr/bin/nm -B -NMEDIT = -OBJDUMP = objdump -OBJEXT = o -OTOOL = -OTOOL64 = -PACKAGE = psvideophot -PACKAGE_BUGREPORT = ipp-support@ifa.hawaii.edu -PACKAGE_NAME = psvideophot -PACKAGE_STRING = psvideophot 1.1.0 -PACKAGE_TARNAME = psvideophot -PACKAGE_VERSION = 1.1.0 -PATH_SEPARATOR = : -PKG_CONFIG = /home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/bin/pkg-config -PPSTATS_CFLAGS = -pthread -DHAVE_PSDB -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/pslib -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/mysql -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/psmodules -PPSTATS_LIBS = -L/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/lib -lppStats -lpsmodules -lpslib -PSASTRO_CFLAGS = -pthread -DHAVE_PSDB -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/pslib -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/mysql -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/psmodules -PSASTRO_LIBS = -L/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/lib -lpsastro -lpsmodules -lpslib -PSLIB_CFLAGS = -pthread -DHAVE_PSDB -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/pslib -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/mysql -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include -PSLIB_LIBS = -L/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/lib -lpslib -PSMODULE_CFLAGS = -pthread -DHAVE_PSDB -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/psmodules -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/pslib -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/mysql -PSMODULE_LIBS = -L/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/lib -lpsmodules -lpslib -PSPHOT_CFLAGS = -pthread -DHAVE_PSDB -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/pslib -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/mysql -I/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include/psmodules -PSPHOT_LIBS = -L/home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/lib -lpsphot -lpsmodules -lpslib -PSVIDEOPHOT_CFLAGS = -PSVIDEOPHOT_LIBS = -RANLIB = ranlib -SED = /bin/sed -SET_MAKE = -SHELL = /bin/sh -STRIP = strip -SVN = /usr/bin/svn -SVNVERSION = /usr/bin/svnversion -VERSION = 1.1.0 -abs_builddir = /data/ippc18.0/home/heather/ipp-ppimage2011/psvideophot/src -abs_srcdir = /data/ippc18.0/home/heather/ipp-ppimage2011/psvideophot/src -abs_top_builddir = /data/ippc18.0/home/heather/ipp-ppimage2011/psvideophot -abs_top_srcdir = /data/ippc18.0/home/heather/ipp-ppimage2011/psvideophot -ac_ct_CC = gcc -ac_ct_DUMPBIN = -am__include = include -am__leading_dot = . -am__quote = -am__tar = ${AMTAR} chof - "$$tardir" -am__untar = ${AMTAR} xf - -bindir = /home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/bin -build = x86_64-unknown-linux-gnu -build_alias = -build_cpu = x86_64 -build_os = linux-gnu -build_vendor = unknown -builddir = . -datadir = /home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/share -datarootdir = ${prefix}/share -docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} -dvidir = ${docdir} -exec_prefix = ${prefix} -host = x86_64-unknown-linux-gnu -host_alias = -host_cpu = x86_64 -host_os = linux-gnu -host_vendor = unknown -htmldir = ${docdir} -includedir = /home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/include -infodir = ${datarootdir}/info -install_sh = $(SHELL) /data/ippc18.0/home/heather/ipp-ppimage2011/psvideophot/install-sh -libdir = /home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/lib -libexecdir = ${exec_prefix}/libexec -localedir = ${datarootdir}/locale -localstatedir = ${prefix}/var -lt_ECHO = echo -mandir = /home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/man -mkdir_p = /usr/bin/mkdir -p -oldincludedir = /usr/include -pdfdir = ${docdir} -prefix = /home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64 -program_transform_name = s,x,x, -psdir = ${docdir} -sbindir = ${exec_prefix}/sbin -sharedstatedir = ${prefix}/com -srcdir = . -sysconfdir = /home/panstarrs/heather/psconfig/ipp-ppimage2011.lin64/etc -target_alias = -top_build_prefix = ../ -top_builddir = .. -top_srcdir = .. -noinst_HEADERS = \ - psvideophot.h - -#PSVIDEOPHOT_VERSION = "UNKNOWN" -PSVIDEOPHOT_VERSION = `$(SVNVERSION) ..` -#PSVIDEOPHOT_BRANCH = "UNKNOWN" -PSVIDEOPHOT_BRANCH = `$(SVN) info .. | $(SED) -n -e '/URL:/ h' -e '/Repository Root:/ { x; H; x; s|Repository Root: \(.*\)\nURL: \1\(.*\)|\2| ; s|^/|| ; s|/[a-zA-Z]*/src.*|| ; p }'` -#PSVIDEOPHOT_SOURCE = "UNKNOWN" -PSVIDEOPHOT_SOURCE = `$(SVN) info | $(SED) -n -e 's/Repository UUID: // p'` -BUILT_SOURCES = psvideophotVersionDefinitions.h -psvideophot_CFLAGS = $(PSVIDEOPHOT_CFLAGS) $(PPSTATS_CFLAGS) $(PSASTRO_CFLAGS) $(PSPHOT_CFLAGS) $(PSMODULE_CFLAGS) $(PSLIB_CFLAGS) -psvideophot_LDFLAGS = $(PSVIDEOPHOT_LIBS) $(PSASTRO_LIBS) $(PPSTATS_LIBS) $(PSPHOT_LIBS) $(PSMODULE_LIBS) $(PSLIB_LIBS) -psvideophot_SOURCES = \ - psvideophot.c \ - psvideophotArguments.c \ - psvideophotParseCamera.c \ - psvideophotOptions.c \ - psvideophotCleanup.c \ - psvideophotDefineFile.c \ - psvideoLoop.c \ - psvideophotFileCheck.c \ - psvideophotVersion.c - -CLEANFILES = *~ -all: $(BUILT_SOURCES) config.h - $(MAKE) $(AM_MAKEFLAGS) all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ - else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status src/config.h -$(srcdir)/config.h.in: $(am__configure_deps) - cd $(top_srcdir) && $(AUTOHEADER) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ - else :; fi; \ - done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ - rm -f "$(DESTDIR)$(bindir)/$$f"; \ - done - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -psvideophot$(EXEEXT): $(psvideophot_OBJECTS) $(psvideophot_DEPENDENCIES) - @rm -f psvideophot$(EXEEXT) - $(psvideophot_LINK) $(psvideophot_OBJECTS) $(psvideophot_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -include ./$(DEPDIR)/psvideophot-psvideoLoop.Po -include ./$(DEPDIR)/psvideophot-psvideophot.Po -include ./$(DEPDIR)/psvideophot-psvideophotArguments.Po -include ./$(DEPDIR)/psvideophot-psvideophotCleanup.Po -include ./$(DEPDIR)/psvideophot-psvideophotDefineFile.Po -include ./$(DEPDIR)/psvideophot-psvideophotFileCheck.Po -include ./$(DEPDIR)/psvideophot-psvideophotOptions.Po -include ./$(DEPDIR)/psvideophot-psvideophotParseCamera.Po -include ./$(DEPDIR)/psvideophot-psvideophotVersion.Po - -.c.o: - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -# source='$<' object='$@' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(COMPILE) -c $< - -.c.obj: - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -# source='$<' object='$@' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(COMPILE) -c `$(CYGPATH_W) '$<'` - -.c.lo: - $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -# source='$<' object='$@' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LTCOMPILE) -c -o $@ $< - -psvideophot-psvideophot.o: psvideophot.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophot.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophot.Tpo -c -o psvideophot-psvideophot.o `test -f 'psvideophot.c' || echo '$(srcdir)/'`psvideophot.c - mv -f $(DEPDIR)/psvideophot-psvideophot.Tpo $(DEPDIR)/psvideophot-psvideophot.Po -# source='psvideophot.c' object='psvideophot-psvideophot.o' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophot.o `test -f 'psvideophot.c' || echo '$(srcdir)/'`psvideophot.c - -psvideophot-psvideophot.obj: psvideophot.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophot.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophot.Tpo -c -o psvideophot-psvideophot.obj `if test -f 'psvideophot.c'; then $(CYGPATH_W) 'psvideophot.c'; else $(CYGPATH_W) '$(srcdir)/psvideophot.c'; fi` - mv -f $(DEPDIR)/psvideophot-psvideophot.Tpo $(DEPDIR)/psvideophot-psvideophot.Po -# source='psvideophot.c' object='psvideophot-psvideophot.obj' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophot.obj `if test -f 'psvideophot.c'; then $(CYGPATH_W) 'psvideophot.c'; else $(CYGPATH_W) '$(srcdir)/psvideophot.c'; fi` - -psvideophot-psvideophotArguments.o: psvideophotArguments.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotArguments.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotArguments.Tpo -c -o psvideophot-psvideophotArguments.o `test -f 'psvideophotArguments.c' || echo '$(srcdir)/'`psvideophotArguments.c - mv -f $(DEPDIR)/psvideophot-psvideophotArguments.Tpo $(DEPDIR)/psvideophot-psvideophotArguments.Po -# source='psvideophotArguments.c' object='psvideophot-psvideophotArguments.o' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotArguments.o `test -f 'psvideophotArguments.c' || echo '$(srcdir)/'`psvideophotArguments.c - -psvideophot-psvideophotArguments.obj: psvideophotArguments.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotArguments.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotArguments.Tpo -c -o psvideophot-psvideophotArguments.obj `if test -f 'psvideophotArguments.c'; then $(CYGPATH_W) 'psvideophotArguments.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotArguments.c'; fi` - mv -f $(DEPDIR)/psvideophot-psvideophotArguments.Tpo $(DEPDIR)/psvideophot-psvideophotArguments.Po -# source='psvideophotArguments.c' object='psvideophot-psvideophotArguments.obj' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotArguments.obj `if test -f 'psvideophotArguments.c'; then $(CYGPATH_W) 'psvideophotArguments.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotArguments.c'; fi` - -psvideophot-psvideophotParseCamera.o: psvideophotParseCamera.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotParseCamera.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotParseCamera.Tpo -c -o psvideophot-psvideophotParseCamera.o `test -f 'psvideophotParseCamera.c' || echo '$(srcdir)/'`psvideophotParseCamera.c - mv -f $(DEPDIR)/psvideophot-psvideophotParseCamera.Tpo $(DEPDIR)/psvideophot-psvideophotParseCamera.Po -# source='psvideophotParseCamera.c' object='psvideophot-psvideophotParseCamera.o' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotParseCamera.o `test -f 'psvideophotParseCamera.c' || echo '$(srcdir)/'`psvideophotParseCamera.c - -psvideophot-psvideophotParseCamera.obj: psvideophotParseCamera.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotParseCamera.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotParseCamera.Tpo -c -o psvideophot-psvideophotParseCamera.obj `if test -f 'psvideophotParseCamera.c'; then $(CYGPATH_W) 'psvideophotParseCamera.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotParseCamera.c'; fi` - mv -f $(DEPDIR)/psvideophot-psvideophotParseCamera.Tpo $(DEPDIR)/psvideophot-psvideophotParseCamera.Po -# source='psvideophotParseCamera.c' object='psvideophot-psvideophotParseCamera.obj' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotParseCamera.obj `if test -f 'psvideophotParseCamera.c'; then $(CYGPATH_W) 'psvideophotParseCamera.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotParseCamera.c'; fi` - -psvideophot-psvideophotOptions.o: psvideophotOptions.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotOptions.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotOptions.Tpo -c -o psvideophot-psvideophotOptions.o `test -f 'psvideophotOptions.c' || echo '$(srcdir)/'`psvideophotOptions.c - mv -f $(DEPDIR)/psvideophot-psvideophotOptions.Tpo $(DEPDIR)/psvideophot-psvideophotOptions.Po -# source='psvideophotOptions.c' object='psvideophot-psvideophotOptions.o' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotOptions.o `test -f 'psvideophotOptions.c' || echo '$(srcdir)/'`psvideophotOptions.c - -psvideophot-psvideophotOptions.obj: psvideophotOptions.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotOptions.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotOptions.Tpo -c -o psvideophot-psvideophotOptions.obj `if test -f 'psvideophotOptions.c'; then $(CYGPATH_W) 'psvideophotOptions.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotOptions.c'; fi` - mv -f $(DEPDIR)/psvideophot-psvideophotOptions.Tpo $(DEPDIR)/psvideophot-psvideophotOptions.Po -# source='psvideophotOptions.c' object='psvideophot-psvideophotOptions.obj' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotOptions.obj `if test -f 'psvideophotOptions.c'; then $(CYGPATH_W) 'psvideophotOptions.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotOptions.c'; fi` - -psvideophot-psvideophotCleanup.o: psvideophotCleanup.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotCleanup.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotCleanup.Tpo -c -o psvideophot-psvideophotCleanup.o `test -f 'psvideophotCleanup.c' || echo '$(srcdir)/'`psvideophotCleanup.c - mv -f $(DEPDIR)/psvideophot-psvideophotCleanup.Tpo $(DEPDIR)/psvideophot-psvideophotCleanup.Po -# source='psvideophotCleanup.c' object='psvideophot-psvideophotCleanup.o' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotCleanup.o `test -f 'psvideophotCleanup.c' || echo '$(srcdir)/'`psvideophotCleanup.c - -psvideophot-psvideophotCleanup.obj: psvideophotCleanup.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotCleanup.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotCleanup.Tpo -c -o psvideophot-psvideophotCleanup.obj `if test -f 'psvideophotCleanup.c'; then $(CYGPATH_W) 'psvideophotCleanup.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotCleanup.c'; fi` - mv -f $(DEPDIR)/psvideophot-psvideophotCleanup.Tpo $(DEPDIR)/psvideophot-psvideophotCleanup.Po -# source='psvideophotCleanup.c' object='psvideophot-psvideophotCleanup.obj' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotCleanup.obj `if test -f 'psvideophotCleanup.c'; then $(CYGPATH_W) 'psvideophotCleanup.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotCleanup.c'; fi` - -psvideophot-psvideophotDefineFile.o: psvideophotDefineFile.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotDefineFile.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotDefineFile.Tpo -c -o psvideophot-psvideophotDefineFile.o `test -f 'psvideophotDefineFile.c' || echo '$(srcdir)/'`psvideophotDefineFile.c - mv -f $(DEPDIR)/psvideophot-psvideophotDefineFile.Tpo $(DEPDIR)/psvideophot-psvideophotDefineFile.Po -# source='psvideophotDefineFile.c' object='psvideophot-psvideophotDefineFile.o' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotDefineFile.o `test -f 'psvideophotDefineFile.c' || echo '$(srcdir)/'`psvideophotDefineFile.c - -psvideophot-psvideophotDefineFile.obj: psvideophotDefineFile.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotDefineFile.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotDefineFile.Tpo -c -o psvideophot-psvideophotDefineFile.obj `if test -f 'psvideophotDefineFile.c'; then $(CYGPATH_W) 'psvideophotDefineFile.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotDefineFile.c'; fi` - mv -f $(DEPDIR)/psvideophot-psvideophotDefineFile.Tpo $(DEPDIR)/psvideophot-psvideophotDefineFile.Po -# source='psvideophotDefineFile.c' object='psvideophot-psvideophotDefineFile.obj' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotDefineFile.obj `if test -f 'psvideophotDefineFile.c'; then $(CYGPATH_W) 'psvideophotDefineFile.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotDefineFile.c'; fi` - -psvideophot-psvideoLoop.o: psvideoLoop.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideoLoop.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideoLoop.Tpo -c -o psvideophot-psvideoLoop.o `test -f 'psvideoLoop.c' || echo '$(srcdir)/'`psvideoLoop.c - mv -f $(DEPDIR)/psvideophot-psvideoLoop.Tpo $(DEPDIR)/psvideophot-psvideoLoop.Po -# source='psvideoLoop.c' object='psvideophot-psvideoLoop.o' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideoLoop.o `test -f 'psvideoLoop.c' || echo '$(srcdir)/'`psvideoLoop.c - -psvideophot-psvideoLoop.obj: psvideoLoop.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideoLoop.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideoLoop.Tpo -c -o psvideophot-psvideoLoop.obj `if test -f 'psvideoLoop.c'; then $(CYGPATH_W) 'psvideoLoop.c'; else $(CYGPATH_W) '$(srcdir)/psvideoLoop.c'; fi` - mv -f $(DEPDIR)/psvideophot-psvideoLoop.Tpo $(DEPDIR)/psvideophot-psvideoLoop.Po -# source='psvideoLoop.c' object='psvideophot-psvideoLoop.obj' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideoLoop.obj `if test -f 'psvideoLoop.c'; then $(CYGPATH_W) 'psvideoLoop.c'; else $(CYGPATH_W) '$(srcdir)/psvideoLoop.c'; fi` - -psvideophot-psvideophotFileCheck.o: psvideophotFileCheck.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotFileCheck.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotFileCheck.Tpo -c -o psvideophot-psvideophotFileCheck.o `test -f 'psvideophotFileCheck.c' || echo '$(srcdir)/'`psvideophotFileCheck.c - mv -f $(DEPDIR)/psvideophot-psvideophotFileCheck.Tpo $(DEPDIR)/psvideophot-psvideophotFileCheck.Po -# source='psvideophotFileCheck.c' object='psvideophot-psvideophotFileCheck.o' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotFileCheck.o `test -f 'psvideophotFileCheck.c' || echo '$(srcdir)/'`psvideophotFileCheck.c - -psvideophot-psvideophotFileCheck.obj: psvideophotFileCheck.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotFileCheck.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotFileCheck.Tpo -c -o psvideophot-psvideophotFileCheck.obj `if test -f 'psvideophotFileCheck.c'; then $(CYGPATH_W) 'psvideophotFileCheck.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotFileCheck.c'; fi` - mv -f $(DEPDIR)/psvideophot-psvideophotFileCheck.Tpo $(DEPDIR)/psvideophot-psvideophotFileCheck.Po -# source='psvideophotFileCheck.c' object='psvideophot-psvideophotFileCheck.obj' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotFileCheck.obj `if test -f 'psvideophotFileCheck.c'; then $(CYGPATH_W) 'psvideophotFileCheck.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotFileCheck.c'; fi` - -psvideophot-psvideophotVersion.o: psvideophotVersion.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotVersion.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotVersion.Tpo -c -o psvideophot-psvideophotVersion.o `test -f 'psvideophotVersion.c' || echo '$(srcdir)/'`psvideophotVersion.c - mv -f $(DEPDIR)/psvideophot-psvideophotVersion.Tpo $(DEPDIR)/psvideophot-psvideophotVersion.Po -# source='psvideophotVersion.c' object='psvideophot-psvideophotVersion.o' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotVersion.o `test -f 'psvideophotVersion.c' || echo '$(srcdir)/'`psvideophotVersion.c - -psvideophot-psvideophotVersion.obj: psvideophotVersion.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotVersion.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotVersion.Tpo -c -o psvideophot-psvideophotVersion.obj `if test -f 'psvideophotVersion.c'; then $(CYGPATH_W) 'psvideophotVersion.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotVersion.c'; fi` - mv -f $(DEPDIR)/psvideophot-psvideophotVersion.Tpo $(DEPDIR)/psvideophot-psvideophotVersion.Po -# source='psvideophotVersion.c' object='psvideophot-psvideophotVersion.obj' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotVersion.obj `if test -f 'psvideophotVersion.c'; then $(CYGPATH_W) 'psvideophotVersion.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotVersion.c'; fi` - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) check-am -all-am: Makefile $(PROGRAMS) $(HEADERS) config.h -installdirs: - for dir in "$(DESTDIR)$(bindir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic clean-libtool clean-local \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-hdr distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-exec-am: install-binPROGRAMS - -install-html: install-html-am - -install-info: install-info-am - -install-man: - -install-pdf: install-pdf-am - -install-ps: install-ps-am - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ - clean-generic clean-libtool clean-local ctags distclean \ - distclean-compile distclean-generic distclean-hdr \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-binPROGRAMS \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags uninstall uninstall-am uninstall-binPROGRAMS - - -# Force recompilation of psvideophotVersion.c, since it gets the version information -psvideophotVersion.c: psvideophotVersionDefinitions.h -psvideophotVersionDefinitions.h: psvideophotVersionDefinitions.h.in FORCE - -$(RM) psvideophotVersionDefinitions.h - $(SED) -e "s|@PSVIDEOPHOT_VERSION@|\"$(PSVIDEOPHOT_VERSION)\"|" -e "s|@PSVIDEOPHOT_BRANCH@|\"$(PSVIDEOPHOT_BRANCH)\"|" -e "s|@PSVIDEOPHOT_SOURCE@|\"$(PSVIDEOPHOT_SOURCE)\"|" psvideophotVersionDefinitions.h.in > psvideophotVersionDefinitions.h -FORCE: ; - -clean-local: - -rm -f TAGS -# Tags for emacs -tags: - etags `find . -name \*.[ch] -print` -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: Index: anches/haf_branches/ppimage2011/psvideophot/src/Makefile.in =================================================================== --- /branches/haf_branches/ppimage2011/psvideophot/src/Makefile.in (revision 31548) +++ (revision ) @@ -1,682 +1,0 @@ -# Makefile.in generated by automake 1.10 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -bin_PROGRAMS = psvideophot$(EXEEXT) -subdir = src -DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/config.h.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -PROGRAMS = $(bin_PROGRAMS) -am_psvideophot_OBJECTS = psvideophot-psvideophot.$(OBJEXT) \ - psvideophot-psvideophotArguments.$(OBJEXT) \ - psvideophot-psvideophotParseCamera.$(OBJEXT) \ - psvideophot-psvideophotOptions.$(OBJEXT) \ - psvideophot-psvideophotCleanup.$(OBJEXT) \ - psvideophot-psvideophotDefineFile.$(OBJEXT) \ - psvideophot-psvideoLoop.$(OBJEXT) \ - psvideophot-psvideophotFileCheck.$(OBJEXT) \ - psvideophot-psvideophotVersion.$(OBJEXT) -psvideophot_OBJECTS = $(am_psvideophot_OBJECTS) -psvideophot_LDADD = $(LDADD) -psvideophot_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(psvideophot_CFLAGS) \ - $(CFLAGS) $(psvideophot_LDFLAGS) $(LDFLAGS) -o $@ -DEFAULT_INCLUDES = -I.@am__isrc@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -SOURCES = $(psvideophot_SOURCES) -DIST_SOURCES = $(psvideophot_SOURCES) -HEADERS = $(noinst_HEADERS) -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PPSTATS_CFLAGS = @PPSTATS_CFLAGS@ -PPSTATS_LIBS = @PPSTATS_LIBS@ -PSASTRO_CFLAGS = @PSASTRO_CFLAGS@ -PSASTRO_LIBS = @PSASTRO_LIBS@ -PSLIB_CFLAGS = @PSLIB_CFLAGS@ -PSLIB_LIBS = @PSLIB_LIBS@ -PSMODULE_CFLAGS = @PSMODULE_CFLAGS@ -PSMODULE_LIBS = @PSMODULE_LIBS@ -PSPHOT_CFLAGS = @PSPHOT_CFLAGS@ -PSPHOT_LIBS = @PSPHOT_LIBS@ -PSVIDEOPHOT_CFLAGS = @PSVIDEOPHOT_CFLAGS@ -PSVIDEOPHOT_LIBS = @PSVIDEOPHOT_LIBS@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SVN = @SVN@ -SVNVERSION = @SVNVERSION@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -noinst_HEADERS = \ - psvideophot.h - -@HAVE_SVNVERSION_FALSE@PSVIDEOPHOT_VERSION = "UNKNOWN" -@HAVE_SVNVERSION_TRUE@PSVIDEOPHOT_VERSION = `$(SVNVERSION) ..` -@HAVE_SVN_FALSE@PSVIDEOPHOT_BRANCH = "UNKNOWN" -@HAVE_SVN_TRUE@PSVIDEOPHOT_BRANCH = `$(SVN) info .. | $(SED) -n -e '/URL:/ h' -e '/Repository Root:/ { x; H; x; s|Repository Root: \(.*\)\nURL: \1\(.*\)|\2| ; s|^/|| ; s|/[a-zA-Z]*/src.*|| ; p }'` -@HAVE_SVN_FALSE@PSVIDEOPHOT_SOURCE = "UNKNOWN" -@HAVE_SVN_TRUE@PSVIDEOPHOT_SOURCE = `$(SVN) info | $(SED) -n -e 's/Repository UUID: // p'` -BUILT_SOURCES = psvideophotVersionDefinitions.h -psvideophot_CFLAGS = $(PSVIDEOPHOT_CFLAGS) $(PPSTATS_CFLAGS) $(PSASTRO_CFLAGS) $(PSPHOT_CFLAGS) $(PSMODULE_CFLAGS) $(PSLIB_CFLAGS) -psvideophot_LDFLAGS = $(PSVIDEOPHOT_LIBS) $(PSASTRO_LIBS) $(PPSTATS_LIBS) $(PSPHOT_LIBS) $(PSMODULE_LIBS) $(PSLIB_LIBS) -psvideophot_SOURCES = \ - psvideophot.c \ - psvideophotArguments.c \ - psvideophotParseCamera.c \ - psvideophotOptions.c \ - psvideophotCleanup.c \ - psvideophotDefineFile.c \ - psvideoLoop.c \ - psvideophotFileCheck.c \ - psvideophotVersion.c - -CLEANFILES = *~ -all: $(BUILT_SOURCES) config.h - $(MAKE) $(AM_MAKEFLAGS) all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ - else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status src/config.h -$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_srcdir) && $(AUTOHEADER) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ - else :; fi; \ - done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ - rm -f "$(DESTDIR)$(bindir)/$$f"; \ - done - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -psvideophot$(EXEEXT): $(psvideophot_OBJECTS) $(psvideophot_DEPENDENCIES) - @rm -f psvideophot$(EXEEXT) - $(psvideophot_LINK) $(psvideophot_OBJECTS) $(psvideophot_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/psvideophot-psvideoLoop.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/psvideophot-psvideophot.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/psvideophot-psvideophotArguments.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/psvideophot-psvideophotCleanup.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/psvideophot-psvideophotDefineFile.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/psvideophot-psvideophotFileCheck.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/psvideophot-psvideophotOptions.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/psvideophot-psvideophotParseCamera.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/psvideophot-psvideophotVersion.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< - -psvideophot-psvideophot.o: psvideophot.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophot.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophot.Tpo -c -o psvideophot-psvideophot.o `test -f 'psvideophot.c' || echo '$(srcdir)/'`psvideophot.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophot.Tpo $(DEPDIR)/psvideophot-psvideophot.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophot.c' object='psvideophot-psvideophot.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophot.o `test -f 'psvideophot.c' || echo '$(srcdir)/'`psvideophot.c - -psvideophot-psvideophot.obj: psvideophot.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophot.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophot.Tpo -c -o psvideophot-psvideophot.obj `if test -f 'psvideophot.c'; then $(CYGPATH_W) 'psvideophot.c'; else $(CYGPATH_W) '$(srcdir)/psvideophot.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophot.Tpo $(DEPDIR)/psvideophot-psvideophot.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophot.c' object='psvideophot-psvideophot.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophot.obj `if test -f 'psvideophot.c'; then $(CYGPATH_W) 'psvideophot.c'; else $(CYGPATH_W) '$(srcdir)/psvideophot.c'; fi` - -psvideophot-psvideophotArguments.o: psvideophotArguments.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotArguments.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotArguments.Tpo -c -o psvideophot-psvideophotArguments.o `test -f 'psvideophotArguments.c' || echo '$(srcdir)/'`psvideophotArguments.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotArguments.Tpo $(DEPDIR)/psvideophot-psvideophotArguments.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotArguments.c' object='psvideophot-psvideophotArguments.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotArguments.o `test -f 'psvideophotArguments.c' || echo '$(srcdir)/'`psvideophotArguments.c - -psvideophot-psvideophotArguments.obj: psvideophotArguments.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotArguments.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotArguments.Tpo -c -o psvideophot-psvideophotArguments.obj `if test -f 'psvideophotArguments.c'; then $(CYGPATH_W) 'psvideophotArguments.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotArguments.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotArguments.Tpo $(DEPDIR)/psvideophot-psvideophotArguments.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotArguments.c' object='psvideophot-psvideophotArguments.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotArguments.obj `if test -f 'psvideophotArguments.c'; then $(CYGPATH_W) 'psvideophotArguments.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotArguments.c'; fi` - -psvideophot-psvideophotParseCamera.o: psvideophotParseCamera.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotParseCamera.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotParseCamera.Tpo -c -o psvideophot-psvideophotParseCamera.o `test -f 'psvideophotParseCamera.c' || echo '$(srcdir)/'`psvideophotParseCamera.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotParseCamera.Tpo $(DEPDIR)/psvideophot-psvideophotParseCamera.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotParseCamera.c' object='psvideophot-psvideophotParseCamera.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotParseCamera.o `test -f 'psvideophotParseCamera.c' || echo '$(srcdir)/'`psvideophotParseCamera.c - -psvideophot-psvideophotParseCamera.obj: psvideophotParseCamera.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotParseCamera.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotParseCamera.Tpo -c -o psvideophot-psvideophotParseCamera.obj `if test -f 'psvideophotParseCamera.c'; then $(CYGPATH_W) 'psvideophotParseCamera.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotParseCamera.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotParseCamera.Tpo $(DEPDIR)/psvideophot-psvideophotParseCamera.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotParseCamera.c' object='psvideophot-psvideophotParseCamera.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotParseCamera.obj `if test -f 'psvideophotParseCamera.c'; then $(CYGPATH_W) 'psvideophotParseCamera.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotParseCamera.c'; fi` - -psvideophot-psvideophotOptions.o: psvideophotOptions.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotOptions.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotOptions.Tpo -c -o psvideophot-psvideophotOptions.o `test -f 'psvideophotOptions.c' || echo '$(srcdir)/'`psvideophotOptions.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotOptions.Tpo $(DEPDIR)/psvideophot-psvideophotOptions.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotOptions.c' object='psvideophot-psvideophotOptions.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotOptions.o `test -f 'psvideophotOptions.c' || echo '$(srcdir)/'`psvideophotOptions.c - -psvideophot-psvideophotOptions.obj: psvideophotOptions.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotOptions.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotOptions.Tpo -c -o psvideophot-psvideophotOptions.obj `if test -f 'psvideophotOptions.c'; then $(CYGPATH_W) 'psvideophotOptions.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotOptions.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotOptions.Tpo $(DEPDIR)/psvideophot-psvideophotOptions.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotOptions.c' object='psvideophot-psvideophotOptions.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotOptions.obj `if test -f 'psvideophotOptions.c'; then $(CYGPATH_W) 'psvideophotOptions.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotOptions.c'; fi` - -psvideophot-psvideophotCleanup.o: psvideophotCleanup.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotCleanup.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotCleanup.Tpo -c -o psvideophot-psvideophotCleanup.o `test -f 'psvideophotCleanup.c' || echo '$(srcdir)/'`psvideophotCleanup.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotCleanup.Tpo $(DEPDIR)/psvideophot-psvideophotCleanup.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotCleanup.c' object='psvideophot-psvideophotCleanup.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotCleanup.o `test -f 'psvideophotCleanup.c' || echo '$(srcdir)/'`psvideophotCleanup.c - -psvideophot-psvideophotCleanup.obj: psvideophotCleanup.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotCleanup.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotCleanup.Tpo -c -o psvideophot-psvideophotCleanup.obj `if test -f 'psvideophotCleanup.c'; then $(CYGPATH_W) 'psvideophotCleanup.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotCleanup.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotCleanup.Tpo $(DEPDIR)/psvideophot-psvideophotCleanup.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotCleanup.c' object='psvideophot-psvideophotCleanup.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotCleanup.obj `if test -f 'psvideophotCleanup.c'; then $(CYGPATH_W) 'psvideophotCleanup.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotCleanup.c'; fi` - -psvideophot-psvideophotDefineFile.o: psvideophotDefineFile.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotDefineFile.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotDefineFile.Tpo -c -o psvideophot-psvideophotDefineFile.o `test -f 'psvideophotDefineFile.c' || echo '$(srcdir)/'`psvideophotDefineFile.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotDefineFile.Tpo $(DEPDIR)/psvideophot-psvideophotDefineFile.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotDefineFile.c' object='psvideophot-psvideophotDefineFile.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotDefineFile.o `test -f 'psvideophotDefineFile.c' || echo '$(srcdir)/'`psvideophotDefineFile.c - -psvideophot-psvideophotDefineFile.obj: psvideophotDefineFile.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotDefineFile.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotDefineFile.Tpo -c -o psvideophot-psvideophotDefineFile.obj `if test -f 'psvideophotDefineFile.c'; then $(CYGPATH_W) 'psvideophotDefineFile.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotDefineFile.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotDefineFile.Tpo $(DEPDIR)/psvideophot-psvideophotDefineFile.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotDefineFile.c' object='psvideophot-psvideophotDefineFile.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotDefineFile.obj `if test -f 'psvideophotDefineFile.c'; then $(CYGPATH_W) 'psvideophotDefineFile.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotDefineFile.c'; fi` - -psvideophot-psvideoLoop.o: psvideoLoop.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideoLoop.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideoLoop.Tpo -c -o psvideophot-psvideoLoop.o `test -f 'psvideoLoop.c' || echo '$(srcdir)/'`psvideoLoop.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideoLoop.Tpo $(DEPDIR)/psvideophot-psvideoLoop.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideoLoop.c' object='psvideophot-psvideoLoop.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideoLoop.o `test -f 'psvideoLoop.c' || echo '$(srcdir)/'`psvideoLoop.c - -psvideophot-psvideoLoop.obj: psvideoLoop.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideoLoop.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideoLoop.Tpo -c -o psvideophot-psvideoLoop.obj `if test -f 'psvideoLoop.c'; then $(CYGPATH_W) 'psvideoLoop.c'; else $(CYGPATH_W) '$(srcdir)/psvideoLoop.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideoLoop.Tpo $(DEPDIR)/psvideophot-psvideoLoop.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideoLoop.c' object='psvideophot-psvideoLoop.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideoLoop.obj `if test -f 'psvideoLoop.c'; then $(CYGPATH_W) 'psvideoLoop.c'; else $(CYGPATH_W) '$(srcdir)/psvideoLoop.c'; fi` - -psvideophot-psvideophotFileCheck.o: psvideophotFileCheck.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotFileCheck.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotFileCheck.Tpo -c -o psvideophot-psvideophotFileCheck.o `test -f 'psvideophotFileCheck.c' || echo '$(srcdir)/'`psvideophotFileCheck.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotFileCheck.Tpo $(DEPDIR)/psvideophot-psvideophotFileCheck.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotFileCheck.c' object='psvideophot-psvideophotFileCheck.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotFileCheck.o `test -f 'psvideophotFileCheck.c' || echo '$(srcdir)/'`psvideophotFileCheck.c - -psvideophot-psvideophotFileCheck.obj: psvideophotFileCheck.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotFileCheck.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotFileCheck.Tpo -c -o psvideophot-psvideophotFileCheck.obj `if test -f 'psvideophotFileCheck.c'; then $(CYGPATH_W) 'psvideophotFileCheck.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotFileCheck.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotFileCheck.Tpo $(DEPDIR)/psvideophot-psvideophotFileCheck.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotFileCheck.c' object='psvideophot-psvideophotFileCheck.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotFileCheck.obj `if test -f 'psvideophotFileCheck.c'; then $(CYGPATH_W) 'psvideophotFileCheck.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotFileCheck.c'; fi` - -psvideophot-psvideophotVersion.o: psvideophotVersion.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotVersion.o -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotVersion.Tpo -c -o psvideophot-psvideophotVersion.o `test -f 'psvideophotVersion.c' || echo '$(srcdir)/'`psvideophotVersion.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotVersion.Tpo $(DEPDIR)/psvideophot-psvideophotVersion.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotVersion.c' object='psvideophot-psvideophotVersion.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotVersion.o `test -f 'psvideophotVersion.c' || echo '$(srcdir)/'`psvideophotVersion.c - -psvideophot-psvideophotVersion.obj: psvideophotVersion.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -MT psvideophot-psvideophotVersion.obj -MD -MP -MF $(DEPDIR)/psvideophot-psvideophotVersion.Tpo -c -o psvideophot-psvideophotVersion.obj `if test -f 'psvideophotVersion.c'; then $(CYGPATH_W) 'psvideophotVersion.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotVersion.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/psvideophot-psvideophotVersion.Tpo $(DEPDIR)/psvideophot-psvideophotVersion.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='psvideophotVersion.c' object='psvideophot-psvideophotVersion.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(psvideophot_CFLAGS) $(CFLAGS) -c -o psvideophot-psvideophotVersion.obj `if test -f 'psvideophotVersion.c'; then $(CYGPATH_W) 'psvideophotVersion.c'; else $(CYGPATH_W) '$(srcdir)/psvideophotVersion.c'; fi` - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) check-am -all-am: Makefile $(PROGRAMS) $(HEADERS) config.h -installdirs: - for dir in "$(DESTDIR)$(bindir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic clean-libtool clean-local \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-hdr distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-exec-am: install-binPROGRAMS - -install-html: install-html-am - -install-info: install-info-am - -install-man: - -install-pdf: install-pdf-am - -install-ps: install-ps-am - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ - clean-generic clean-libtool clean-local ctags distclean \ - distclean-compile distclean-generic distclean-hdr \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-binPROGRAMS \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags uninstall uninstall-am uninstall-binPROGRAMS - - -# Force recompilation of psvideophotVersion.c, since it gets the version information -psvideophotVersion.c: psvideophotVersionDefinitions.h -psvideophotVersionDefinitions.h: psvideophotVersionDefinitions.h.in FORCE - -$(RM) psvideophotVersionDefinitions.h - $(SED) -e "s|@PSVIDEOPHOT_VERSION@|\"$(PSVIDEOPHOT_VERSION)\"|" -e "s|@PSVIDEOPHOT_BRANCH@|\"$(PSVIDEOPHOT_BRANCH)\"|" -e "s|@PSVIDEOPHOT_SOURCE@|\"$(PSVIDEOPHOT_SOURCE)\"|" psvideophotVersionDefinitions.h.in > psvideophotVersionDefinitions.h -FORCE: ; - -clean-local: - -rm -f TAGS -# Tags for emacs -tags: - etags `find . -name \*.[ch] -print` -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: Index: anches/haf_branches/ppimage2011/psvideophot/src/config.h =================================================================== --- /branches/haf_branches/ppimage2011/psvideophot/src/config.h (revision 31548) +++ (revision ) @@ -1,98 +1,0 @@ -/* src/config.h. Generated from config.h.in by configure. */ -/* src/config.h.in. Generated from configure.ac by autoheader. */ - -/* Define to 1 if you have the header file. */ -#define HAVE_DLFCN_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_INTTYPES_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_MEMORY_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STDINT_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STDLIB_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STRINGS_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STRING_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_STAT_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_TYPES_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_UNISTD_H 1 - -/* Define to the sub-directory in which libtool stores uninstalled libraries. - */ -#define LT_OBJDIR ".libs/" - -/* Name of package */ -#define PACKAGE "psvideophot" - -/* Define to the address where bug reports for this package should be sent. */ -#define PACKAGE_BUGREPORT "ipp-support@ifa.hawaii.edu" - -/* Define to the full name of this package. */ -#define PACKAGE_NAME "psvideophot" - -/* Define to the full name and version of this package. */ -#define PACKAGE_STRING "psvideophot 1.1.0" - -/* Define to the one symbol short name of this package. */ -#define PACKAGE_TARNAME "psvideophot" - -/* Define to the version of this package. */ -#define PACKAGE_VERSION "1.1.0" - -/* Define to 1 if you have the ANSI C header files. */ -#define STDC_HEADERS 1 - -/* Enable extensions on AIX 3, Interix. */ -#ifndef _ALL_SOURCE -# define _ALL_SOURCE 1 -#endif -/* Enable GNU extensions on systems that have them. */ -#ifndef _GNU_SOURCE -# define _GNU_SOURCE 1 -#endif -/* Enable threading extensions on Solaris. */ -#ifndef _POSIX_PTHREAD_SEMANTICS -# define _POSIX_PTHREAD_SEMANTICS 1 -#endif -/* Enable extensions on HP NonStop. */ -#ifndef _TANDEM_SOURCE -# define _TANDEM_SOURCE 1 -#endif -/* Enable general extensions on Solaris. */ -#ifndef __EXTENSIONS__ -# define __EXTENSIONS__ 1 -#endif - - -/* Version number of package */ -#define VERSION "1.1.0" - -/* Number of bits in a file offset, on hosts where this is settable. */ -/* #undef _FILE_OFFSET_BITS */ - -/* Define for large files, on AIX-style hosts. */ -/* #undef _LARGE_FILES */ - -/* Define to 1 if on MINIX. */ -/* #undef _MINIX */ - -/* Define to 2 if the system does not provide POSIX.1 features except with - this defined. */ -/* #undef _POSIX_1_SOURCE */ - -/* Define to 1 if you need to in order for `stat' and other things to work. */ -/* #undef _POSIX_SOURCE */ Index: anches/haf_branches/ppimage2011/psvideophot/src/config.h.in =================================================================== --- /branches/haf_branches/ppimage2011/psvideophot/src/config.h.in (revision 31548) +++ (revision ) @@ -1,97 +1,0 @@ -/* src/config.h.in. Generated from configure.ac by autoheader. */ - -/* Define to 1 if you have the header file. */ -#undef HAVE_DLFCN_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Define to the sub-directory in which libtool stores uninstalled libraries. - */ -#undef LT_OBJDIR - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Enable extensions on AIX 3, Interix. */ -#ifndef _ALL_SOURCE -# undef _ALL_SOURCE -#endif -/* Enable GNU extensions on systems that have them. */ -#ifndef _GNU_SOURCE -# undef _GNU_SOURCE -#endif -/* Enable threading extensions on Solaris. */ -#ifndef _POSIX_PTHREAD_SEMANTICS -# undef _POSIX_PTHREAD_SEMANTICS -#endif -/* Enable extensions on HP NonStop. */ -#ifndef _TANDEM_SOURCE -# undef _TANDEM_SOURCE -#endif -/* Enable general extensions on Solaris. */ -#ifndef __EXTENSIONS__ -# undef __EXTENSIONS__ -#endif - - -/* Version number of package */ -#undef VERSION - -/* Number of bits in a file offset, on hosts where this is settable. */ -#undef _FILE_OFFSET_BITS - -/* Define for large files, on AIX-style hosts. */ -#undef _LARGE_FILES - -/* Define to 1 if on MINIX. */ -#undef _MINIX - -/* Define to 2 if the system does not provide POSIX.1 features except with - this defined. */ -#undef _POSIX_1_SOURCE - -/* Define to 1 if you need to in order for `stat' and other things to work. */ -#undef _POSIX_SOURCE Index: anches/haf_branches/ppimage2011/psvideophot/src/psvideophotVersionDefinitions.h =================================================================== --- /branches/haf_branches/ppimage2011/psvideophot/src/psvideophotVersionDefinitions.h (revision 31548) +++ (revision ) @@ -1,8 +1,0 @@ -#ifndef PSVIDEOPHOT_VERSION_DEFINITIONS_H -#define PSVIDEOPHOT_VERSION_DEFINITIONS_H - -#define PSVIDEOPHOT_VERSION "exported" // SVN version -#define PSVIDEOPHOT_BRANCH "" // SVN branch -#define PSVIDEOPHOT_SOURCE "60eb6cdc-a59c-4636-a4e0-dba66a9721fd" // SVN source - -#endif Index: anches/haf_branches/ppimage2011/psvideophot/src/stamp-h1 =================================================================== --- /branches/haf_branches/ppimage2011/psvideophot/src/stamp-h1 (revision 31548) +++ (revision ) @@ -1,1 +1,0 @@ -timestamp for src/config.h