Index: trunk/psLib/ltmain.sh =================================================================== --- trunk/psLib/ltmain.sh (revision 3239) +++ trunk/psLib/ltmain.sh (revision 3377) @@ -2,5 +2,5 @@ # NOTE: Changing this file will not affect anything until you rerun configure. # -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 # Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 @@ -25,32 +25,4 @@ # the same distribution terms that you use for the rest of that program. -basename="s,^.*/,,g" - -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" - -# The name of this program: -progname=`echo "$progpath" | $SED $basename` -modename="$progname" - -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 - -PROGRAM=ltmain.sh -PACKAGE=libtool -VERSION=1.5.8 -TIMESTAMP=" (1.1220.2.118 2004/08/07 12:24:38)" - -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes. -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - # Check that we have a working $echo. if test "X$1" = X--no-reexec; then @@ -65,5 +37,5 @@ else # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$progpath" --no-reexec ${1+"$@"} + exec $SHELL "$0" --no-reexec ${1+"$@"} fi @@ -74,6 +46,19 @@ $* EOF - exit $EXIT_SUCCESS + exit 0 fi + +# define SED for historic ltconfig's generated by Libtool 1.3 +test -z "$SED" && SED=sed + +# The name of this program. +progname=`$echo "$0" | ${SED} 's%^.*/%%'` +modename="$progname" + +# Constants. +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=1.4.3 +TIMESTAMP=" (1.922.2.111 2002/10/23 02:54:36)" default_mode= @@ -88,15 +73,15 @@ Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' -# test EBCDIC or ASCII -case `echo A|tr A '\301'` in - A) # EBCDIC based system - SP2NL="tr '\100' '\n'" - NL2SP="tr '\r\n' '\100\100'" - ;; - *) # Assume ASCII based system - SP2NL="tr '\040' '\012'" - NL2SP="tr '\015\012' '\040\040'" - ;; -esac +# test EBCDIC or ASCII +case `echo A|od -x` in + *[Cc]1*) # EBCDIC based system + SP2NL="tr '\100' '\n'" + NL2SP="tr '\r\n' '\100\100'" + ;; + *) # Assume ASCII based system + SP2NL="tr '\040' '\012'" + NL2SP="tr '\015\012' '\040\040'" + ;; +esac # NLS nuisances. @@ -113,11 +98,10 @@ # Make sure IFS has a sensible default -: ${IFS=" -"} +: ${IFS=" "} if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - $echo "$modename: not configured to build any kind of library" 1>&2 - $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE + echo "$modename: not configured to build any kind of library" 1>&2 + echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 fi @@ -134,235 +118,6 @@ o2lo="s/\\.${objext}\$/.lo/" -##################################### -# Shell function definitions: -# This seems to be the best place for them - -# func_win32_libid arg -# return the library type of file 'arg' -# -# Need a lot of goo to handle *both* DLLs and import libs -# Has to be a shell function in order to 'eat' the argument -# that is supplied when $file_magic_command is called. -func_win32_libid () { - win32_libid_type="unknown" - win32_fileres=`file -L $1 2>/dev/null` - case $win32_fileres in - *ar\ archive\ import\ library*) # definitely import - win32_libid_type="x86 archive import" - ;; - *ar\ archive*) # could be an import, or static - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ - $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then - win32_nmres=`eval $NM -f posix -A $1 | \ - sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'` - if test "X$win32_nmres" = "Ximport" ; then - win32_libid_type="x86 archive import" - else - win32_libid_type="x86 archive static" - fi - fi - ;; - *DLL*) - win32_libid_type="x86 DLL" - ;; - *executable*) # but shell scripts are "executable" too... - case $win32_fileres in - *MS\ Windows\ PE\ Intel*) - win32_libid_type="x86 DLL" - ;; - esac - ;; - esac - $echo $win32_libid_type -} - - -# func_infer_tag arg -# Infer tagged configuration to use if any are available and -# if one wasn't chosen via the "--tag" command line option. -# Only attempt this if the compiler in the base compile -# command doesn't match the default compiler. -# arg is usually of the form 'gcc ...' -func_infer_tag () { - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" - done - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. - *) - for z in $available_tags; do - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" - done - case "$@ " in - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - $echo "$modename: unable to infer tagged configuration" - $echo "$modename: specify a tag with \`--tag'" 1>&2 - exit $EXIT_FAILURE -# else -# $echo "$modename: using $tagname tagged configuration" - fi - ;; - esac - fi -} - - -# func_extract_archives gentop oldlib ... -func_extract_archives () { - my_gentop="$1"; shift - my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" - my_status="" - - $show "${rm}r $my_gentop" - $run ${rm}r "$my_gentop" - $show "$mkdir $my_gentop" - $run $mkdir "$my_gentop" - my_status=$? - if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then - exit $my_status - fi - - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` - my_xdir="$my_gentop/$my_xlib" - - $show "${rm}r $my_xdir" - $run ${rm}r "$my_xdir" - $show "$mkdir $my_xdir" - $run $mkdir "$my_xdir" - status=$? - if test "$status" -ne 0 && test ! -d "$my_xdir"; then - exit $status - fi - case $host in - *-darwin*) - $show "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - if test -z "$run"; then - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - darwin_base_archive=`basename $darwin_archive` - darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` - if test -n "$darwin_arches"; then - darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - $show "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - # Remove the table of contents from the thin files. - $AR -d "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" __.SYMDEF 2>/dev/null || true - $AR -d "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" __.SYMDEF\ SORTED 2>/dev/null || true - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - $AR -xo "${darwin_base_archive}" - rm "${darwin_base_archive}" - cd "$darwin_curdir" - done # $darwin_arches - ## Okay now we have a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f | xargs basename | sort -u | $NL2SP` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` - lipo -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - rm -rf unfat-$$ - cd "$darwin_orig_dir" - else - cd $darwin_orig_dir - (cd $my_xdir && $AR x $my_xabs) || exit $? - fi # $darwin_arches - fi # $run - ;; - *) - # We will extract separately just the conflicting names and we will - # no longer touch any unique names. It is faster to leave these - # extract automatically by $AR in one run. - $show "(cd $my_xdir && $AR x $my_xabs)" - $run eval "(cd \$my_xdir && $AR x \$my_xabs)" || exit $? - if ($AR t "$my_xabs" | sort | sort -uc >/dev/null 2>&1); then - : - else - $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 - $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 - $AR t "$my_xabs" | sort | uniq -cd | while read -r count name - do - i=1 - while test "$i" -le "$count" - do - # Put our $i before any first dot (extension) - # Never overwrite any file - name_to="$name" - while test "X$name_to" = "X$name" || test -f "$my_xdir/$name_to" - do - name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` - done - $show "(cd $my_xdir && $AR xN $i $my_xabs '$name' && $mv '$name' '$name_to')" - $run eval "(cd \$my_xdir && $AR xN $i \$my_xabs '$name' && $mv '$name' '$name_to')" || exit $? - i=`expr $i + 1` - done - done - fi - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done - - func_extract_archives_result="$my_oldobjs" -} -# End of Shell function definitions -##################################### - -# Darwin sucks -eval std_shrext=\"$shrext_cmds\" - # Parse our command line options once, thoroughly. -while test "$#" -gt 0 +while test $# -gt 0 do arg="$1" @@ -380,32 +135,4 @@ execute_dlfiles="$execute_dlfiles $arg" ;; - tag) - tagname="$arg" - preserve_args="${preserve_args}=$arg" - - # Check whether tagname contains only valid characters - case $tagname in - *[!-_A-Za-z0-9,/]*) - $echo "$progname: invalid tag name: $tagname" 1>&2 - exit $EXIT_FAILURE - ;; - esac - - case $tagname in - CC) - # Don't test for the "default" C tag, as we know, it's there, but - # not specially marked. - ;; - *) - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then - taglist="$taglist $tagname" - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" - else - $echo "$progname: ignoring unknown tag $tagname" 1>&2 - fi - ;; - esac - ;; *) eval "$prev=\$arg" @@ -425,25 +152,16 @@ --version) - $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - $echo - $echo "Copyright (C) 2003 Free Software Foundation, Inc." - $echo "This is free software; see the source for copying conditions. There is NO" - $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - exit $EXIT_SUCCESS + echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" + exit 0 ;; --config) - ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath - # Now print the configurations for the tags. - for tagname in $taglist; do - ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" - done - exit $EXIT_SUCCESS + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 + exit 0 ;; --debug) - $echo "$progname: enabling shell trace mode" + echo "$progname: enabling shell trace mode" set -x - preserve_args="$preserve_args $arg" ;; @@ -453,16 +171,16 @@ --features) - $echo "host: $host" + echo "host: $host" if test "$build_libtool_libs" = yes; then - $echo "enable shared libraries" + echo "enable shared libraries" else - $echo "disable shared libraries" + echo "disable shared libraries" fi if test "$build_old_libs" = yes; then - $echo "enable static libraries" + echo "enable static libraries" else - $echo "disable static libraries" + echo "disable static libraries" fi - exit $EXIT_SUCCESS + exit 0 ;; @@ -476,13 +194,4 @@ --quiet | --silent) show=: - preserve_args="$preserve_args $arg" - ;; - - --tag) prevopt="--tag" prev=tag ;; - --tag=*) - set tag "$optarg" ${1+"$@"} - shift - prev=tag - preserve_args="$preserve_args --tag" ;; @@ -495,5 +204,5 @@ $echo "$modename: unrecognized option \`$arg'" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; @@ -508,5 +217,5 @@ $echo "$modename: option \`$prevopt' requires an argument" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi @@ -520,8 +229,6 @@ # Infer the operation mode. if test -z "$mode"; then - $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 - $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2 case $nonopt in - *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) + *cc | *++ | gcc* | *-gcc* | xlc*) mode=link for arg @@ -564,5 +271,5 @@ $echo "$modename: unrecognized option \`-dlopen'" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi @@ -578,96 +285,127 @@ # Get the compilation command and the source file. base_compile= - srcfile="$nonopt" # always keep a non-empty value in "srcfile" - suppress_opt=yes + prev= + lastarg= + srcfile="$nonopt" suppress_output= - arg_mode=normal - libobj= - later= - + + user_target=no for arg do - case "$arg_mode" in - arg ) - # do not "continue". Instead, add this to base_compile - lastarg="$arg" - arg_mode=normal - ;; - - target ) + case $prev in + "") ;; + xcompiler) + # Aesthetically quote the previous argument. + prev= + lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + + case $arg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + + # Add the previous argument to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + continue + ;; + esac + + # Accept any command-line options. + case $arg in + -o) + if test "$user_target" != "no"; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit 1 + fi + user_target=next + ;; + + -static) + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + + # Add the arguments to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + continue + ;; + esac + + case $user_target in + next) + # The next one is the -o target name + user_target=yes + continue + ;; + yes) + # We got the output file + user_target=set libobj="$arg" - arg_mode=normal continue ;; - - normal ) - # Accept any command-line options. - case $arg in - -o) - if test -n "$libobj" ; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit $EXIT_FAILURE - fi - arg_mode=target - continue - ;; - - -static | -prefer-pic | -prefer-non-pic) - later="$later $arg" - continue - ;; - - -no-suppress) - suppress_opt=no - continue - ;; - - -Xcompiler) - arg_mode=arg # the next one goes into the "base_compile" arg list - continue # The current "srcfile" will either be retained or - ;; # replaced later. I would guess that would be a bug. - - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` - lastarg= - save_ifs="$IFS"; IFS=',' - for arg in $args; do - IFS="$save_ifs" - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - lastarg="$lastarg $arg" - done - IFS="$save_ifs" - lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` - - # Add the arguments to base_compile. - base_compile="$base_compile $lastarg" - continue - ;; - - * ) - # Accept the current argument as the source file. - # The previous "srcfile" becomes the current argument. - # - lastarg="$srcfile" - srcfile="$arg" - ;; - esac # case $arg - ;; - esac # case $arg_mode + esac + + # Accept the current argument as the source file. + lastarg="$srcfile" + srcfile="$arg" # Aesthetically quote the previous argument. + + # Backslashify any backslashes, double quotes, and dollar signs. + # These are the only characters that are still specially + # interpreted inside of double-quoted scrings. lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` - case $lastarg in # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. + case $lastarg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" @@ -675,19 +413,22 @@ esac - base_compile="$base_compile $lastarg" - done # for arg - - case $arg_mode in - arg) - $echo "$modename: you must specify an argument for -Xcompile" - exit $EXIT_FAILURE + # Add the previous argument to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + done + + case $user_target in + set) ;; - target) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit $EXIT_FAILURE + no) + # Get the name of the library object. + libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ;; *) - # Get the name of the library object. - [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit 1 ;; esac @@ -695,5 +436,5 @@ # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSifmso]' + xform='[cCFSfmso]' case $libobj in *.ada) xform=ada ;; @@ -703,11 +444,8 @@ *.c++) xform=c++ ;; *.cc) xform=cc ;; - *.ii) xform=ii ;; - *.class) xform=class ;; *.cpp) xform=cpp ;; *.cxx) xform=cxx ;; *.f90) xform=f90 ;; *.for) xform=for ;; - *.java) xform=java ;; esac @@ -718,53 +456,23 @@ *) $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac - - func_infer_tag $base_compile - - for arg in $later; do - case $arg in - -static) - build_old_libs=yes - continue - ;; - - -prefer-pic) - pic_mode=yes - continue - ;; - - -prefer-non-pic) - pic_mode=no - continue - ;; - esac - done - - objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir= - else - xdir=$xdir/ - fi - lobj=${xdir}$objdir/$objname if test -z "$base_compile"; then $echo "$modename: you must specify a compilation command" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # Delete any leftover library objects. if test "$build_old_libs" = yes; then - removelist="$obj $lobj $libobj ${libobj}T" + removelist="$obj $libobj" else - removelist="$lobj $libobj ${libobj}T" + removelist="$libobj" fi $run $rm $removelist - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + trap "$run $rm $removelist; exit 1" 1 2 15 # On Cygwin there's no "real" PIC flag so we must build both object types @@ -785,7 +493,6 @@ lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + trap "$run $rm $removelist; exit 1" 1 2 15 else - output_obj= need_locks=no lockfile= @@ -795,5 +502,5 @@ # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then - until $run ln "$progpath" "$lockfile" 2>/dev/null; do + until $run ln "$0" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 @@ -801,5 +508,5 @@ elif test "$need_locks" = warn; then if test -f "$lockfile"; then - $echo "\ + echo "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` @@ -813,7 +520,7 @@ $run $rm $removelist - exit $EXIT_FAILURE - fi - $echo $srcfile > "$lockfile" + exit 1 + fi + echo $srcfile > "$lockfile" fi @@ -821,18 +528,4 @@ eval srcfile=\"$fix_srcfile_path\" fi - - $run $rm "$libobj" "${libobj}T" - - # Create a libtool object file (analogous to a ".la" file), - # but don't create it if we're doing a dry run. - test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then - $echo "\ + test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then + echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -888,11 +596,11 @@ $run $rm $removelist - exit $EXIT_FAILURE + exit 1 fi # Just move the object if needed, then go on to compile the next one - if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - $show "$mv $output_obj $lobj" - if $run $mv $output_obj $lobj; then : + if test x"$output_obj" != x"$libobj"; then + $show "$mv $output_obj $libobj" + if $run $mv $output_obj $libobj; then : else error=$? @@ -902,21 +610,46 @@ fi - # Append the name of the PIC object to the libtool object file. - test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then - $echo "\ + test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then + echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -960,9 +695,9 @@ $run $rm $removelist - exit $EXIT_FAILURE + exit 1 fi # Just move the object if needed - if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + if test x"$output_obj" != x"$obj"; then $show "$mv $output_obj $obj" if $run $mv $output_obj $obj; then : @@ -974,22 +709,20 @@ fi - # Append the name of the non-PIC object the libtool object file. - # Only append if the libtool object file exists. - test -z "$run" && cat >> ${libobj}T <> ${libobj}T < $libobj" + $run eval "echo timestamp > \$libobj" || exit $? + else + # Move the .lo from within objdir + $show "$mv $libobj $lo_libobj" + if $run $mv $libobj $lo_libobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi fi - - $run $mv "${libobj}T" "${libobj}" # Unlock the critical section if it was locked @@ -998,5 +731,5 @@ fi - exit $EXIT_SUCCESS + exit 0 ;; @@ -1009,5 +742,5 @@ # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra - # flag for every libtool invocation. + # flag for every libtool invokation. # allow_undefined=no @@ -1024,5 +757,4 @@ esac libtool_args="$nonopt" - base_compile="$nonopt $@" compile_command="$nonopt" finalize_command="$nonopt" @@ -1055,6 +787,4 @@ no_install=no objs= - non_pic_objects= - precious_files_regex= prefer_static_libs=no preload=no @@ -1068,7 +798,4 @@ thread_safe=no vinfo= - vinfo_number=no - - func_infer_tag $base_compile # We need to know -static, to get the right output filenames. @@ -1101,5 +828,5 @@ # Go through the arguments, transforming them on the way. - while test "$#" -gt 0; do + while test $# -gt 0; do arg="$1" shift @@ -1166,5 +893,5 @@ if test ! -f "$arg"; then $echo "$modename: symbol file \`$arg' does not exist" - exit $EXIT_FAILURE + exit 1 fi prev= @@ -1176,123 +903,11 @@ continue ;; - inst_prefix) + inst_prefix) inst_prefix_dir="$arg" prev= continue ;; - precious_regex) - precious_files_regex="$arg" - prev= - continue - ;; release) release="-$arg" - prev= - continue - ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat $save_arg` - do -# moreargs="$moreargs $fil" - arg=$fil - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= - - # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE - fi - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE - else - # Dry-run case. - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - fi - done - else - $echo "$modename: link input file \`$save_arg' does not exist" - exit $EXIT_FAILURE - fi - arg=$save_arg prev= continue @@ -1304,5 +919,5 @@ *) $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac @@ -1336,17 +951,4 @@ continue ;; - xcclinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $qarg" - prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" - continue - ;; - shrext) - shrext_cmds="$arg" - prev= - continue - ;; *) eval "$prev=\"\$arg\"" @@ -1355,5 +957,5 @@ ;; esac - fi # test -n "$prev" + fi # test -n $prev prevarg="$arg" @@ -1397,5 +999,5 @@ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: more than one -exported-symbols argument is not allowed" - exit $EXIT_FAILURE + exit 1 fi if test "X$arg" = "X-export-symbols"; then @@ -1416,5 +1018,5 @@ -L[A-Z][A-Z]*:*) case $with_gcc/$host in - no/*-*-irix* | /*-*-irix*) + no/*-*-irix* | no/*-*-nonstopux*) compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" @@ -1433,5 +1035,5 @@ if test -z "$absdir"; then $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi dir="$absdir" @@ -1471,16 +1073,12 @@ test "X$arg" = "X-lc" && continue ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs -framework System" + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd*) + # Do not include libc_r directly, use -pthread flag. continue + ;; esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd* | *-*-freebsd*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac fi deplibs="$deplibs $arg" @@ -1488,39 +1086,6 @@ ;; - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) - deplibs="$deplibs $arg" - continue - ;; - -module) module=yes - continue - ;; - - # gcc -m* arguments should be passed to the linker via $compiler_flags - # in order to pass architecture information to the linker - # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo - # but this is not reliable with gcc because gcc may use -mfoo to - # select a different linker, different libraries, etc, while - # -Wl,-mfoo simply passes -mfoo to the linker. - -m*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - if test "$with_gcc" = "yes" ; then - compiler_flags="$compiler_flags $arg" - fi - continue - ;; - - -shrext) - prev=shrext continue ;; @@ -1550,15 +1115,5 @@ ;; - -objectlist) - prev=objectlist - continue - ;; - -o) prev=output ;; - - -precious-files-regex) - prev=precious_regex - continue - ;; -release) @@ -1584,5 +1139,5 @@ *) $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac @@ -1610,9 +1165,4 @@ -version-info) prev=vinfo - continue - ;; - -version-number) - prev=vinfo - vinfo_number=yes continue ;; @@ -1665,9 +1215,4 @@ ;; - -XCClinker) - prev=xcclinker - continue - ;; - # Some other compiler flag. -* | +*) @@ -1682,99 +1227,27 @@ ;; - *.$objext) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= - - # Read the .lo file - # If there is no directory component, then add one. + *.lo | *.$objext) + # A library or standard object. + if test "$prev" = dlfiles; then + # This file was specified with -dlopen. + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $arg" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` + prev= + else case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; + *.lo) libobjs="$libobjs $arg" ;; + *) objs="$objs $arg" ;; esac - - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE - fi - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE - else - # Dry-run case. - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi fi ;; @@ -1827,5 +1300,5 @@ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi @@ -1836,5 +1309,4 @@ fi - oldlibs= # calculate the name of the file, without its directory outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` @@ -1857,9 +1329,9 @@ fi # Create the object directory. - if test ! -d "$output_objdir"; then + if test ! -d $output_objdir; then $show "$mkdir $output_objdir" $run $mkdir $output_objdir status=$? - if test "$status" -ne 0 && test ! -d "$output_objdir"; then + if test $status -ne 0 && test ! -d $output_objdir; then exit $status fi @@ -1871,5 +1343,5 @@ $echo "$modename: you must specify an output file" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; *.$libext) linkmode=oldlib ;; @@ -1879,15 +1351,5 @@ esac - case $host in - *cygwin* | *mingw* | *pw32*) - # don't eliminate duplications in $postdeps and $predeps - duplicate_compiler_generated_deps=yes - ;; - *) - duplicate_compiler_generated_deps=$duplicate_deps - ;; - esac specialdeplibs= - libs= # Find all interdependent deplibs by searching for libraries @@ -1901,23 +1363,4 @@ libs="$libs $deplib" done - - if test "$linkmode" = lib; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" - - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; - esac - pre_post_deps="$pre_post_deps $pre_post_dep" - done - fi - pre_post_deps= - fi - deplibs= newdependency_libs= @@ -1934,5 +1377,5 @@ *) $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac @@ -1951,20 +1394,15 @@ esac for pass in $passes; do - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" - deplibs= - fi - if test "$linkmode" = prog; then + if test $linkmode = prog; then + # Determine which files to process case $pass in - dlopen) libs="$dlfiles" ;; + dlopen) + libs="$dlfiles" + save_deplibs="$deplibs" # Collect dlpreopened libraries + deplibs= + ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; esac - fi - if test "$pass" = dlopen; then - # Collect dlpreopened libraries - save_deplibs="$deplibs" - deplibs= fi for deplib in $libs; do @@ -1972,19 +1410,10 @@ found=no case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - fi - continue - ;; -l*) - if test "$linkmode" != lib && test "$linkmode" != prog; then - $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + if test $linkmode = oldlib && test $linkmode = obj; then + $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 continue fi - if test "$pass" = conv; then + if test $pass = conv; then deplibs="$deplib $deplibs" continue @@ -1992,16 +1421,10 @@ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do - for search_ext in .la $std_shrext .so .a; do - # Search the libtool library - lib="$searchdir/lib${name}${search_ext}" - if test -f "$lib"; then - if test "$search_ext" = ".la"; then - found=yes - else - found=no - fi - break 2 - fi - done + # Search the libtool library + lib="$searchdir/lib${name}.la" + if test -f "$lib"; then + found=yes + break + fi done if test "$found" != yes; then @@ -2012,43 +1435,7 @@ else deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs" fi continue - else # deplib is a libtool library - # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, - # We need to do some special things here, and not later. - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $deplib "*) - if (${SED} -e '2q' $lib | - grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - library_names= - old_library= - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - for l in $old_library $library_names; do - ll="$l" - done - if test "X$ll" = "X$old_library" ; then # only static version available - found=no - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." - lib=$ladir/$old_library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - fi - ;; - *) ;; - esac - fi fi ;; # -l @@ -2057,23 +1444,23 @@ lib) deplibs="$deplib $deplibs" - test "$pass" = conv && continue + test $pass = conv && continue newdependency_libs="$deplib $newdependency_libs" newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; prog) - if test "$pass" = conv; then + if test $pass = conv; then deplibs="$deplib $deplibs" continue fi - if test "$pass" = scan; then + if test $pass = scan; then deplibs="$deplib $deplibs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; *) - $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 + $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 ;; esac # linkmode @@ -2081,5 +1468,5 @@ ;; # -L -R*) - if test "$pass" = link; then + if test $pass = link; then dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` # Make sure the xrpath contains only unique directories. @@ -2094,5 +1481,5 @@ *.la) lib="$deplib" ;; *.$libext) - if test "$pass" = conv; then + if test $pass = conv; then deplibs="$deplib $deplibs" continue @@ -2100,31 +1487,16 @@ case $linkmode in lib) - valid_a_lib=no - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` - if eval $echo \"$deplib\" 2>/dev/null \ - | $SED 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes - fi - ;; - pass_all) - valid_a_lib=yes - ;; - esac - if test "$valid_a_lib" != yes; then - $echo - $echo "*** Warning: Trying to link with static lib archive $deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because the file extensions .$libext of this argument makes me believe" - $echo "*** that it is just a static archive that I should not used here." + if test "$deplibs_check_method" != pass_all; then + echo + echo "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not used here." else - $echo - $echo "*** Warning: Linking the shared library $output against the" - $echo "*** static library $deplib is not portable!" + echo + echo "*** Warning: Linking the shared library $output against the" + echo "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi @@ -2132,5 +1504,5 @@ ;; prog) - if test "$pass" != link; then + if test $pass != link; then deplibs="$deplib $deplibs" else @@ -2143,16 +1515,12 @@ ;; # *.$libext *.lo | *.$objext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - elif test "$linkmode" = prog; then - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" - fi + if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" fi continue @@ -2163,15 +1531,15 @@ ;; esac # case $deplib - if test "$found" = yes || test -f "$lib"; then : + if test $found = yes || test -f "$lib"; then : else $echo "$modename: cannot find the library \`$lib'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + exit 1 fi @@ -2186,7 +1554,6 @@ old_library= # If the library was installed with an old release of libtool, - # it will not redefine variables installed, or shouldnotlink + # it will not redefine variable installed. installed=yes - shouldnotlink=no # Read the .la file @@ -2198,10 +1565,11 @@ if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then + { test $linkmode = oldlib && test $linkmode = obj; }; then + # Add dl[pre]opened files of deplib test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi - if test "$pass" = conv; then + if test $pass = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" @@ -2209,5 +1577,5 @@ if test -z "$old_library"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # It is a libtool convenience library, so add in its objects. @@ -2224,11 +1592,10 @@ tmp_libs="$tmp_libs $deplib" done - elif test "$linkmode" != prog && test "$linkmode" != lib; then + elif test $linkmode != prog && test $linkmode != lib; then $echo "$modename: \`$lib' is not a convenience library" 1>&2 - exit $EXIT_FAILURE + exit 1 fi continue fi # $pass = conv - # Get the name of the library we link against. @@ -2239,21 +1606,17 @@ if test -z "$linklib"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # This library was specified with -dlopen. - if test "$pass" = dlopen; then + if test $pass = dlopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi - if test -z "$dlname" || - test "$dlopen_support" != yes || - test "$build_libtool_libs" = no; then + exit 1 + fi + if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - dlprefiles="$dlprefiles $lib $dependency_libs" + # statically, we need to preload. + dlprefiles="$dlprefiles $lib" else newdlfiles="$newdlfiles $lib" @@ -2288,23 +1651,16 @@ fi else - if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir="$ladir" - absdir="$abs_ladir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - fi + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" fi # $installed = yes name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` # This library was specified with -dlpreopen. - if test "$pass" = dlpreopen; then + if test $pass = dlpreopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # Prefer using a static library (so that no silly _DYNAMIC symbols @@ -2322,5 +1678,5 @@ if test -z "$libdir"; then # Link the convenience library - if test "$linkmode" = lib; then + if test $linkmode = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then @@ -2328,11 +1684,10 @@ finalize_deplibs="$dir/$old_library $finalize_deplibs" else - deplibs="$lib $deplibs" # used for prog,scan pass + deplibs="$lib $deplibs" fi continue fi - - if test "$linkmode" = prog && test "$pass" != link; then + if test $linkmode = prog && test $pass != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" @@ -2350,5 +1705,5 @@ esac # Need to link against all dependency_libs? - if test "$linkalldeplibs" = yes; then + if test $linkalldeplibs = yes; then deplibs="$deplib $deplibs" else @@ -2367,17 +1722,11 @@ fi # $linkmode = prog... - if test "$linkmode,$pass" = "prog,link"; then - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi - + link_static=no # Whether the deplib will be linked statically + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # Link against this shared library + + if test "$linkmode,$pass" = "prog,link" || + { test $linkmode = lib && test $hardcode_into_libs = yes; }; then # Hardcode the library path. # Skip directories that are in the system default run-time @@ -2401,4 +1750,15 @@ ;; esac + if test $linkmode = prog; then + # We need to hardcode the library path + if test -n "$shlibpath_var"; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $dir" ;; + esac + fi + fi fi # $linkmode,$pass = prog,link... @@ -2410,49 +1770,8 @@ continue fi - fi - - link_static=no # Whether the deplib will be linked statically - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" need_relink=yes - fi - # This is a shared library - - # Warn about portability, can't link against -module's on - # some systems (darwin) - if test "$shouldnotlink" = yes && test "$pass" = link ; then - $echo - if test "$linkmode" = prog; then - $echo "*** Warning: Linking the executable $output against the loadable module" - else - $echo "*** Warning: Linking the shared library $output against the loadable module" - fi - $echo "*** $linklib is not portable!" - fi - if test "$linkmode" = lib && - test "$hardcode_into_libs" = yes; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac fi @@ -2469,5 +1788,5 @@ # bleh windows case $host in - *cygwin* | mingw*) + *cygwin*) major=`expr $current - $age` versuffix="-$major" @@ -2481,6 +1800,6 @@ # Make a new name for the extract_expsyms_cmds to use soroot="$soname" - soname=`$echo $soroot | ${SED} -e 's/^.*\///'` - newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + soname=`echo $soroot | ${SED} -e 's/^.*\///'` + newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" # If the library has no export list, then create one now @@ -2489,8 +1808,7 @@ $show "extracting exported symbol list from \`$soname'" save_ifs="$IFS"; IFS='~' - cmds=$extract_expsyms_cmds + eval cmds=\"$extract_expsyms_cmds\" for cmd in $cmds; do IFS="$save_ifs" - eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? @@ -2503,8 +1821,7 @@ $show "generating import library for \`$soname'" save_ifs="$IFS"; IFS='~' - cmds=$old_archive_from_expsyms_cmds + eval cmds=\"$old_archive_from_expsyms_cmds\" for cmd in $cmds; do IFS="$save_ifs" - eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? @@ -2515,7 +1832,7 @@ dir=$output_objdir linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" - - if test "$linkmode" = prog || test "$mode" != relink; then + fi # test -n $old_archive_from_expsyms_cmds + + if test $linkmode = prog || test "$mode" != relink; then add_shlibpath= add_dir= @@ -2526,20 +1843,4 @@ if test "$hardcode_direct" = no; then add="$dir/$linklib" - case $host in - *-*-sco3.2v5* ) add_dir="-L$dir" ;; - *-*-darwin* ) - # if the lib is a module then we can not link against - # it, someone is ignoring the new warnings I added - if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then - $echo "** Warning, lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then - $echo - $echo "** And there doesn't seem to be a static archive available" - $echo "** The link will probably fail, sorry" - else - add="$dir/$old_library" - fi - fi - esac elif test "$hardcode_minus_L" = no; then case $host in @@ -2560,12 +1861,4 @@ elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case "$libdir" in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; - esac - fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then @@ -2581,5 +1874,5 @@ if test "$lib_linked" != yes; then $echo "$modename: configuration error: unsupported hardcode properties" - exit $EXIT_FAILURE + exit 1 fi @@ -2590,5 +1883,5 @@ esac fi - if test "$linkmode" = prog; then + if test $linkmode = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" @@ -2607,5 +1900,5 @@ fi - if test "$linkmode" = prog || test "$mode" = relink; then + if test $linkmode = prog || test "$mode" = relink; then add_shlibpath= add_dir= @@ -2615,5 +1908,14 @@ add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + add_dir= + if test -n "$inst_prefix_dir"; then + case "$libdir" in + [\\/]*) + add_dir="-L$inst_prefix_dir$libdir" + ;; + esac + fi + add_dir="$add_dir -L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then @@ -2623,26 +1925,20 @@ esac add="-l$name" - elif test "$hardcode_automatic" = yes; then - if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" - else - add="$libdir/$linklib" - fi else # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" # Try looking first in the location we're being installed to. + add_dir= if test -n "$inst_prefix_dir"; then case "$libdir" in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; + [\\/]*) + add_dir="-L$inst_prefix_dir$libdir" + ;; esac fi + add_dir="$add_dir -L$libdir" add="-l$name" fi - if test "$linkmode" = prog; then + if test $linkmode = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" @@ -2652,5 +1948,14 @@ fi fi - elif test "$linkmode" = prog; then + elif test $linkmode = prog; then + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + + # Try to link the static library # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and @@ -2672,19 +1977,19 @@ # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. - $echo - $echo "*** Warning: This system can not link to static lib archive $lib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have." + echo + echo "*** Warning: This system can not link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then - $echo "*** But as you try to build a module library, libtool will still create " - $echo "*** a static module, that should work as long as the dlopening application" - $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then - $echo - $echo "*** However, this would only work if libtool was able to extract symbol" - $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - $echo "*** not find such a program. So, this module is probably useless." - $echo "*** \`nm' from GNU binutils and a full rebuild may help." + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then @@ -2703,9 +2008,8 @@ fi # link shared/static library? - if test "$linkmode" = lib; then + if test $linkmode = lib; then if test -n "$dependency_libs" && - { test "$hardcode_into_libs" != yes || - test "$build_old_libs" = yes || - test "$link_static" = yes; }; then + { test $hardcode_into_libs != yes || test $build_old_libs = yes || + test $link_static = yes; }; then # Extract -R from dependency_libs temp_deplibs= @@ -2738,5 +2042,5 @@ done - if test "$link_all_deplibs" != no; then + if test $link_all_deplibs != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do @@ -2758,63 +2062,18 @@ esac if grep "^installed=no" $deplib > /dev/null; then - path="$absdir/$objdir" + path="-L$absdir/$objdir" else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + exit 1 fi if test "$absdir" != "$libdir"; then $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 fi - path="$absdir" + path="-L$absdir" fi - depdepl= - case $host in - *-*-darwin*) - # we do not want to link against static libs, - # but need to link against shared - eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names" ; then - for tmp in $deplibrary_names ; do - depdepl=$tmp - done - if test -f "$path/$depdepl" ; then - depdepl="$path/$depdepl" - fi - # do not add paths which are already there - case " $newlib_search_path " in - *" $path "*) ;; - *) newlib_search_path="$newlib_search_path $path";; - esac - fi - path="" - ;; - *) - path="-L$path" - ;; - esac - ;; - -l*) - case $host in - *-*-darwin*) - # Again, we only want to link against shared libraries - eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` - for tmp in $newlib_search_path ; do - if test -f "$tmp/lib$tmp_libs.dylib" ; then - eval depdepl="$tmp/lib$tmp_libs.dylib" - break - fi - done - path="" - ;; - *) continue ;; - esac ;; *) continue ;; - esac - case " $deplibs " in - *" $depdepl "*) ;; - *) deplibs="$depdepl $deplibs" ;; esac case " $deplibs " in @@ -2826,6 +2085,5 @@ fi # linkmode = lib done # for deplib in $libs - dependency_libs="$newdependency_libs" - if test "$pass" = dlpreopen; then + if test $pass = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do @@ -2833,6 +2091,7 @@ done fi - if test "$pass" != dlopen; then - if test "$pass" != conv; then + if test $pass != dlopen; then + test $pass != scan && dependency_libs="$newdependency_libs" + if test $pass != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= @@ -2856,28 +2115,7 @@ new_libs= for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; - -R*) ;; *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; @@ -2907,20 +2145,11 @@ done # for var fi - # Last step: remove runtime libs from dependency_libs - # (they stay in deplibs) - tmp_libs= - for i in $dependency_libs ; do - case " $predeps $postdeps $compiler_lib_search_path " in - *" $i "*) - i="" - ;; - esac - if test -n "$i" ; then - tmp_libs="$tmp_libs $i" - fi - done - dependency_libs=$tmp_libs + if test "$pass" = "conv" && + { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then + libs="$deplibs" # reset libs + deplibs= + fi done # for pass - if test "$linkmode" = prog; then + if test $linkmode = prog; then dlfiles="$newdlfiles" dlprefiles="$newdlprefiles" @@ -2929,8 +2158,4 @@ case $linkmode in oldlib) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 - fi - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 @@ -2946,5 +2171,5 @@ if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 + $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 fi @@ -2968,5 +2193,4 @@ lib*) name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; @@ -2975,10 +2199,9 @@ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else @@ -2991,9 +2214,9 @@ if test "$deplibs_check_method" != pass_all; then $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 - exit $EXIT_FAILURE + exit 1 else - $echo - $echo "*** Warning: Linking the shared library $output against the non-libtool" - $echo "*** objects $objs is not portable!" + echo + echo "*** Warning: Linking the shared library $output against the non-libtool" + echo "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi @@ -3005,5 +2228,5 @@ set dummy $rpath - if test "$#" -gt 2; then + if test $# -gt 2; then $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 fi @@ -3014,7 +2237,5 @@ if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so - # convenience libraries should have the same extension an - # archive normally would. + libext=al oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience @@ -3023,5 +2244,5 @@ if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 + $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 fi @@ -3039,80 +2260,43 @@ $echo "$modename: too many parameters to \`-version-info'" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # convert absolute version numbers to libtool ages - # this retains compatibility with .la files and attempts - # to make the code below a bit more comprehensible - - case $vinfo_number in - yes) - number_major="$2" - number_minor="$3" - number_revision="$4" - # - # There are really only two kinds -- those that - # use the current revision as the major version - # and those that subtract age and use age as - # a minor version. But, then there is irix - # which has an extra 1 added just for fun - # - case $version_type in - darwin|linux|osf|windows) - current=`expr $number_major + $number_minor` - age="$number_minor" - revision="$number_revision" - ;; - freebsd-aout|freebsd-elf|sunos) - current="$number_major" - revision="$number_minor" - age="0" - ;; - irix|nonstopux) - current=`expr $number_major + $number_minor - 1` - age="$number_minor" - revision="$number_minor" - ;; - esac - ;; - no) - current="$2" - revision="$3" - age="$4" - ;; - esac + exit 1 + fi + + current="$2" + revision="$3" + age="$4" # Check that each of the things are valid numbers. case $current in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + [0-9]*) ;; *) $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac case $revision in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + [0-9]*) ;; *) $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac case $age in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + [0-9]*) ;; *) $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac - if test "$age" -gt "$current"; then + if test $age -gt $current; then $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + exit 1 fi @@ -3131,5 +2315,5 @@ # Darwin ld doesn't like 0 for these options... minor_current=`expr $current + 1` - verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; @@ -3155,5 +2339,5 @@ # Add in all the interfaces that we are compatible with. loop=$revision - while test "$loop" -ne 0; do + while test $loop != 0; do iface=`expr $revision - $loop` loop=`expr $loop - 1` @@ -3178,5 +2362,5 @@ # Add in all the interfaces that we are compatible with. loop=$age - while test "$loop" -ne 0; do + while test $loop != 0; do iface=`expr $current - $loop` loop=`expr $loop - 1` @@ -3202,6 +2386,6 @@ *) $echo "$modename: unknown library version type \`$version_type'" 1>&2 - $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE + echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 ;; esac @@ -3210,9 +2394,10 @@ if test -z "$vinfo" && test -n "$release"; then major= + verstring="0.0" case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely - verstring= + verstring="" ;; *) @@ -3248,28 +2433,7 @@ if test "$mode" != relink; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`$echo "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - if test "X$precious_files_regex" != "X"; then - if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then - continue - fi - fi - removelist="$removelist $p" - ;; - *) ;; - esac - done - if test -n "$removelist"; then - $show "${rm}r $removelist" - $run ${rm}r $removelist - fi + # Remove our outputs. + $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" + $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* fi @@ -3284,7 +2448,7 @@ # Eliminate all temporary directories. for path in $notinst_path; do - lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'` - deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'` - dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` + lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'` + deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'` + dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` done @@ -3299,5 +2463,5 @@ esac done - if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + if test $hardcode_into_libs != yes || test $build_old_libs = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi @@ -3339,9 +2503,8 @@ *-*-openbsd* | *-*-freebsd*) # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue ;; - *) + *) # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then + if test $build_libtool_need_lc = "yes"; then deplibs="$deplibs -lc" fi @@ -3370,5 +2533,5 @@ # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behavior. + # implementing what was already the behaviour. newdeplibs=$deplibs ;; @@ -3383,20 +2546,43 @@ EOF $rm conftest - $LTCC -o conftest conftest.c $deplibs - if test "$?" -eq 0 ; then + $CC -o conftest conftest.c $deplibs + if test $? -eq 0 ; then ldd_output=`ldd conftest` for i in $deplibs; do name="`expr $i : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" && test "$name" -ne "0"; then - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $i "*) - newdeplibs="$newdeplibs $i" - i="" - ;; - esac - fi - if test -n "$i" ; then + if test -n "$name" && test "$name" != "0"; then + libname=`eval \\$echo \"$libname_spec\"` + deplib_matches=`eval \\$echo \"$library_names_spec\"` + set dummy $deplib_matches + deplib_match=$2 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + newdeplibs="$newdeplibs $i" + else + droppeddeps=yes + echo + echo "*** Warning: dynamic linker does not accept needed library $i." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which I believe you do not have" + echo "*** because a test_compile did reveal that the linker did not use it for" + echo "*** its dynamic dependency list that programs get resolved with at runtime." + fi + else + newdeplibs="$newdeplibs $i" + fi + done + else + # Error occured in the first compile. Let's try to salvage + # the situation: Compile a separate program for each library. + for i in $deplibs; do + name="`expr $i : '-l\(.*\)'`" + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then + $rm conftest + $CC -o conftest conftest.c $i + # Did it work? + if test $? -eq 0 ; then + ldd_output=`ldd conftest` libname=`eval \\$echo \"$libname_spec\"` deplib_matches=`eval \\$echo \"$library_names_spec\"` @@ -3407,62 +2593,19 @@ else droppeddeps=yes - $echo - $echo "*** Warning: dynamic linker does not accept needed library $i." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which I believe you do not have" - $echo "*** because a test_compile did reveal that the linker did not use it for" - $echo "*** its dynamic dependency list that programs get resolved with at runtime." - fi - fi - else - newdeplibs="$newdeplibs $i" - fi - done - else - # Error occurred in the first compile. Let's try to salvage - # the situation: Compile a separate program for each library. - for i in $deplibs; do - name="`expr $i : '-l\(.*\)'`" - # If $name is empty we are operating on a -L argument. - if test "$name" != "" && test "$name" != "0"; then - $rm conftest - $LTCC -o conftest conftest.c $i - # Did it work? - if test "$?" -eq 0 ; then - ldd_output=`ldd conftest` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $i "*) - newdeplibs="$newdeplibs $i" - i="" - ;; - esac - fi - if test -n "$i" ; then - libname=`eval \\$echo \"$libname_spec\"` - deplib_matches=`eval \\$echo \"$library_names_spec\"` - set dummy $deplib_matches - deplib_match=$2 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" - else - droppeddeps=yes - $echo - $echo "*** Warning: dynamic linker does not accept needed library $i." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because a test_compile did reveal that the linker did not use this one" - $echo "*** as a dynamic dependency that programs can get resolved with at runtime." - fi + echo + echo "*** Warning: dynamic linker does not accept needed library $i." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because a test_compile did reveal that the linker did not use this one" + echo "*** as a dynamic dependency that programs can get resolved with at runtime." fi else droppeddeps=yes - $echo - $echo "*** Warning! Library $i is needed by this library but I was not able to" - $echo "*** make it link in! You will probably need to install it or some" - $echo "*** library that it depends on before this library will be fully" - $echo "*** functional. Installing it before continuing would be even better." + echo + echo "*** Warning! Library $i is needed by this library but I was not able to" + echo "*** make it link in! You will probably need to install it or some" + echo "*** library that it depends on before this library will be fully" + echo "*** functional. Installing it before continuing would be even better." fi else @@ -3478,18 +2621,9 @@ name="`expr $a_deplib : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" && test "$name" != "0"; then - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - ;; - esac - fi - if test -n "$a_deplib" ; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do + if test -n "$name" && test "$name" != "0"; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null \ @@ -3512,25 +2646,24 @@ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ | ${SED} 10q \ - | $EGREP "$file_magic_regex" > /dev/null; then + | egrep "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi - done - done - fi + done + done if test -n "$a_deplib" ; then droppeddeps=yes - $echo - $echo "*** Warning: linker path does not have real file for library $a_deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because I did check the linker path looking for a file starting" + echo + echo "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then - $echo "*** with $libname but no candidates were found. (...for file magic test)" + echo "*** with $libname but no candidates were found. (...for file magic test)" else - $echo "*** with $libname and none of the candidates passed a file format test" - $echo "*** using a file magic. Last file checked: $potlib" + echo "*** with $libname and none of the candidates passed a file format test" + echo "*** using a file magic. Last file checked: $potlib" fi fi @@ -3548,41 +2681,31 @@ # If $name is empty we are operating on a -L argument. if test -n "$name" && test "$name" != "0"; then - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - ;; - esac - fi - if test -n "$a_deplib" ; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test - if eval $echo \"$potent_lib\" 2>/dev/null \ - | ${SED} 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check below in file_magic test + if eval echo \"$potent_lib\" 2>/dev/null \ + | ${SED} 10q \ + | egrep "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi done - fi + done if test -n "$a_deplib" ; then droppeddeps=yes - $echo - $echo "*** Warning: linker path does not have real file for library $a_deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because I did check the linker path looking for a file starting" + echo + echo "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then - $echo "*** with $libname but no candidates were found. (...for regex pattern test)" + echo "*** with $libname but no candidates were found. (...for regex pattern test)" else - $echo "*** with $libname and none of the candidates passed a file format test" - $echo "*** using a regex pattern. Last file checked: $potlib" + echo "*** with $libname and none of the candidates passed a file format test" + echo "*** using a regex pattern. Last file checked: $potlib" fi fi @@ -3595,21 +2718,14 @@ none | unknown | *) newdeplibs="" - tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g'` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - for i in $predeps $postdeps ; do - # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` - done - fi - if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ - | grep . >/dev/null; then - $echo + if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ + -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | + grep . >/dev/null; then + echo if test "X$deplibs_check_method" = "Xnone"; then - $echo "*** Warning: inter-library dependencies are not supported in this platform." + echo "*** Warning: inter-library dependencies are not supported in this platform." else - $echo "*** Warning: inter-library dependencies are not known to be supported." + echo "*** Warning: inter-library dependencies are not known to be supported." fi - $echo "*** All declared inter-library dependencies are being dropped." + echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi @@ -3631,15 +2747,15 @@ if test "$droppeddeps" = yes; then if test "$module" = yes; then - $echo - $echo "*** Warning: libtool could not satisfy all declared inter-library" - $echo "*** dependencies of module $libname. Therefore, libtool will create" - $echo "*** a static module, that should work as long as the dlopening" - $echo "*** application is linked with the -dlopen flag." + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + echo "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then - $echo - $echo "*** However, this would only work if libtool was able to extract symbol" - $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - $echo "*** not find such a program. So, this module is probably useless." - $echo "*** \`nm' from GNU binutils and a full rebuild may help." + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then @@ -3651,14 +2767,14 @@ fi else - $echo "*** The inter-library dependencies that have been dropped here will be" - $echo "*** automatically added whenever a program is linked with this library" - $echo "*** or is declared to -dlopen it." - - if test "$allow_undefined" = no; then - $echo - $echo "*** Since this library must not contain undefined symbols," - $echo "*** because either the platform does not support them or" - $echo "*** it was explicitly requested with -no-undefined," - $echo "*** libtool will only create a static version of it." + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + + if test $allow_undefined = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" @@ -3682,5 +2798,5 @@ # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then - if test "$hardcode_into_libs" = yes; then + if test $hardcode_into_libs = yes; then # Hardcode the library paths hardcode_libdirs= @@ -3718,9 +2834,5 @@ test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" - if test -n "$hardcode_libdir_flag_spec_ld"; then - eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" - else - eval dep_rpath=\"$hardcode_libdir_flag_spec\" - fi + eval dep_rpath=\"$hardcode_libdir_flag_spec\" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then @@ -3742,5 +2854,4 @@ # Get the real and link names of the library. - eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names @@ -3753,7 +2864,5 @@ soname="$realname" fi - if test -z "$dlname"; then - dlname=$soname - fi + test -z "$dlname" && dlname=$soname lib="$output_objdir/$realname" @@ -3761,4 +2870,21 @@ do linknames="$linknames $link" + done + + # Ensure that we have .o objects for linkers which dislike .lo + # (e.g. aix) in case we are running --disable-static + for obj in $libobjs; do + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` + if test ! -f $xdir/$oldobj; then + $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" + $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? + fi done @@ -3772,24 +2898,15 @@ export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols - cmds=$export_symbols_cmds + eval cmds=\"$export_symbols_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" - eval cmd=\"$cmd\" - if len=`expr "X$cmd" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - $show "$cmd" - $run eval "$cmd" || exit $? - skipped_export=false - else - # The command line is too long to execute in one step. - $show "using reloadable object file for export list..." - skipped_export=: - fi + $show "$cmd" + $run eval "$cmd" || exit $? done IFS="$save_ifs" if test -n "$export_symbols_regex"; then - $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" + $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' $show "$mv \"${export_symbols}T\" \"$export_symbols\"" $run eval '$mv "${export_symbols}T" "$export_symbols"' @@ -3802,28 +2919,44 @@ fi - tmp_deplibs= - for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - tmp_deplibs="$tmp_deplibs $test_deplib" - ;; - esac - done - deplibs="$tmp_deplibs" - if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" else gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "mkdir $gentop" + $run mkdir "$gentop" + status=$? + if test $status -ne 0 && test ! -d "$gentop"; then + exit $status + fi generated="$generated $gentop" - func_extract_archives $gentop $convenience - libobjs="$libobjs $func_extract_archives_result" - fi - fi - + for xlib in $convenience; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" + status=$? + if test $status -ne 0 && test ! -d "$xdir"; then + exit $status + fi + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + + libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` + done + fi + fi + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" @@ -3837,145 +2970,23 @@ # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - eval test_cmds=\"$module_expsym_cmds\" - cmds=$module_expsym_cmds - else - eval test_cmds=\"$module_cmds\" - cmds=$module_cmds - fi + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval cmds=\"$archive_expsym_cmds\" else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds - else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds - fi - fi - - if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # The command line is too long to link in one step, link piecewise. - $echo "creating reloadable object files..." - - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - delfiles= - last_robj= - k=1 - output=$output_objdir/$save_output-${k}.$objext - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - eval test_cmds=\"$reload_cmds $objlist $last_robj\" - if test "X$objlist" = X || - { len=`expr "X$test_cmds" : ".*"` && - test "$len" -le "$max_cmd_len"; }; then - objlist="$objlist $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else - # All subsequent reloadable object files will link in - # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + save_deplibs="$deplibs" + for conv in $convenience; do + tmp_deplibs= + for test_deplib in $deplibs; do + if test "$test_deplib" != "$conv"; then + tmp_deplibs="$tmp_deplibs $test_deplib" fi - last_robj=$output_objdir/$save_output-${k}.$objext - k=`expr $k + 1` - output=$output_objdir/$save_output-${k}.$objext - objlist=$obj - len=1 - fi + done + deplibs="$tmp_deplibs" done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" - - if ${skipped_export-false}; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - libobjs=$output - # Append the command to create the export file. - eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" - fi - - # Set up a command to remove the reloadale object files - # after they are used. - i=0 - while test "$i" -lt "$k" - do - i=`expr $i + 1` - delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" - done - - $echo "creating a temporary reloadable object file: $output" - - # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - libobjs=$output - # Restore the value of output. - output=$save_output - - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. - - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - cmds=$module_expsym_cmds - else - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds - fi - fi - - # Append the command to remove the reloadable object files - # to the just-reset $cmds. - eval cmds=\"\$cmds~\$rm $delfiles\" + eval cmds=\"$archive_cmds\" + deplibs="$save_deplibs" fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" - eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? @@ -3986,5 +2997,5 @@ if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? - exit $EXIT_SUCCESS + exit 0 fi @@ -4034,5 +3045,5 @@ if test -n "$objs$old_deplibs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit $EXIT_FAILURE + exit 1 fi libobj="$output" @@ -4063,8 +3074,36 @@ else gentop="$output_objdir/${obj}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "mkdir $gentop" + $run mkdir "$gentop" + status=$? + if test $status -ne 0 && test ! -d "$gentop"; then + exit $status + fi generated="$generated $gentop" - func_extract_archives $gentop $convenience - reload_conv_objs="$reload_objs $func_extract_archives_result" + for xlib in $convenience; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" + status=$? + if test $status -ne 0 && test ! -d "$xdir"; then + exit $status + fi + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + + reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` + done fi fi @@ -4074,9 +3113,8 @@ output="$obj" - cmds=$reload_cmds + eval cmds=\"$reload_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" - eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? @@ -4091,5 +3129,5 @@ fi - exit $EXIT_SUCCESS + exit 0 fi @@ -4102,7 +3140,7 @@ # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $run eval "echo timestamp > $libobj" || exit $? - exit $EXIT_SUCCESS + $show "echo timestamp > $libobj" + $run eval "echo timestamp > $libobj" || exit $? + exit 0 fi @@ -4111,13 +3149,26 @@ reload_objs="$libobjs $reload_conv_objs" output="$libobj" - cmds=$reload_cmds + eval cmds=\"$reload_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" - eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" + else + # Just create a symlink. + $show $rm $libobj + $run $rm $libobj + xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$libobj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` + oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` + $show "(cd $xdir && $LN_S $oldobj $baseobj)" + $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? fi @@ -4127,10 +3178,10 @@ fi - exit $EXIT_SUCCESS + exit 0 ;; prog) case $host in - *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; + *cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; esac if test -n "$vinfo"; then @@ -4154,15 +3205,12 @@ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - ;; - esac - - case $host in - *darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - if test "$tagname" = CXX ; then - compile_command="$compile_command ${wl}-bind_at_load" - finalize_command="$finalize_command ${wl}-bind_at_load" - fi - ;; + case $host in + *darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + ;; + esac + ;; esac @@ -4317,10 +3365,10 @@ if test -n "$exclude_expsyms"; then - $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi if test -n "$export_symbols_regex"; then - $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi @@ -4340,6 +3388,6 @@ for arg in $dlprefiles; do $show "extracting global C symbols from \`$arg'" - name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` - $run eval '$echo ": $name " >> "$nlist"' + name=`echo "$arg" | ${SED} -e 's%^.*/%%'` + $run eval 'echo ": $name " >> "$nlist"' $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done @@ -4350,5 +3398,5 @@ if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $mv "$nlist"T "$nlist" fi @@ -4370,5 +3418,5 @@ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' else - $echo '/* NONE */' >> "$output_objdir/$dlsyms" + echo '/* NONE */' >> "$output_objdir/$dlsyms" fi @@ -4422,16 +3470,16 @@ case "$compile_command " in *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; + *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; esac;; *-*-hpux*) case "$compile_command " in *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag";; + *) pic_flag_for_symtable=" $pic_flag -DPIC";; esac esac # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? # Clean up the generated files. @@ -4445,5 +3493,5 @@ *) $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac @@ -4458,5 +3506,5 @@ fi - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + if test $need_relink = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` @@ -4533,5 +3581,5 @@ $show "$link_command" $run eval "$link_command" || exit $? - exit $EXIT_SUCCESS + exit 0 fi @@ -4588,8 +3636,8 @@ # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then - case $progpath in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; - *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + if test "X$echo" = "X$SHELL $0 --fallback-echo"; then + case $0 in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; + *) qecho="$SHELL `pwd`/$0 --fallback-echo";; esac qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` @@ -4603,228 +3651,13 @@ # a .exe suffix, so we strip it off here. case $output in - *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; + *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in - *cygwin*) - exeext=.exe - outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; + *cygwin*) exeext=.exe ;; *) exeext= ;; esac - case $host in - *cygwin* | *mingw* ) - cwrappersource=`$echo ${objdir}/lt-${output}.c` - cwrapper=`$echo ${output}.exe` - $rm $cwrappersource $cwrapper - trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - cat > $cwrappersource <> $cwrappersource<<"EOF" -#include -#include -#include -#include -#include -#include - -#if defined(PATH_MAX) -# define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif - -#ifndef DIR_SEPARATOR -#define DIR_SEPARATOR '/' -#endif - -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) -#define HAVE_DOS_BASED_FILE_SYSTEM -#ifndef DIR_SEPARATOR_2 -#define DIR_SEPARATOR_2 '\\' -#endif -#endif - -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ - -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ -} while (0) - -const char *program_name = NULL; - -void * xmalloc (size_t num); -char * xstrdup (const char *string); -char * basename (const char *name); -char * fnqualify(const char *path); -char * strendzap(char *str, const char *pat); -void lt_fatal (const char *message, ...); - -int -main (int argc, char *argv[]) -{ - char **newargz; - int i; - - program_name = (char *) xstrdup ((char *) basename (argv[0])); - newargz = XMALLOC(char *, argc+2); -EOF - - cat >> $cwrappersource <> $cwrappersource <<"EOF" - newargz[1] = fnqualify(argv[0]); - /* we know the script has the same name, without the .exe */ - /* so make sure newargz[1] doesn't end in .exe */ - strendzap(newargz[1],".exe"); - for (i = 1; i < argc; i++) - newargz[i+1] = xstrdup(argv[i]); - newargz[argc+1] = NULL; -EOF - - cat >> $cwrappersource <> $cwrappersource <<"EOF" -} - -void * -xmalloc (size_t num) -{ - void * p = (void *) malloc (num); - if (!p) - lt_fatal ("Memory exhausted"); - - return p; -} - -char * -xstrdup (const char *string) -{ - return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL -; -} - -char * -basename (const char *name) -{ - const char *base; - -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - /* Skip over the disk name in MSDOS pathnames. */ - if (isalpha (name[0]) && name[1] == ':') - name += 2; -#endif - - for (base = name; *name; name++) - if (IS_DIR_SEPARATOR (*name)) - base = name + 1; - return (char *) base; -} - -char * -fnqualify(const char *path) -{ - size_t size; - char *p; - char tmp[LT_PATHMAX + 1]; - - assert(path != NULL); - - /* Is it qualified already? */ -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - if (isalpha (path[0]) && path[1] == ':') - return xstrdup (path); -#endif - if (IS_DIR_SEPARATOR (path[0])) - return xstrdup (path); - - /* prepend the current directory */ - /* doesn't handle '~' */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */ - p = XMALLOC(char, size); - sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path); - return p; -} - -char * -strendzap(char *str, const char *pat) -{ - size_t len, patlen; - - assert(str != NULL); - assert(pat != NULL); - - len = strlen(str); - patlen = strlen(pat); - - if (patlen <= len) - { - str += len - patlen; - if (strcmp(str, pat) == 0) - *str = '\0'; - } - return str; -} - -static void -lt_error_core (int exit_status, const char * mode, - const char * message, va_list ap) -{ - fprintf (stderr, "%s: %s: ", program_name, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - - if (exit_status >= 0) - exit (exit_status); -} - -void -lt_fatal (const char *message, ...) -{ - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, "FATAL", message, ap); - va_end (ap); -} -EOF - # we should really use a build-platform specific compiler - # here, but OTOH, the wrappers (shell script and this C one) - # are only useful if you want to execute the "real" binary. - # Since the "real" binary is built for $host, then this - # wrapper might as well be built for $host, too. - $run $LTCC -s -o $cwrapper $cwrappersource - ;; - esac $rm $output - trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 + trap "$rm $output; exit 1" 1 2 15 $echo > $output "\ @@ -4842,10 +3675,10 @@ # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed='${SED} -e 1s/^X//' +Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi relink_command=\"$relink_command\" @@ -4902,5 +3735,5 @@ if test "$fast_install" = yes; then - $echo >> $output "\ + echo >> $output "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" @@ -4918,5 +3751,5 @@ fi" - $echo >> $output "\ + echo >> $output "\ # relink executable if necessary @@ -4926,5 +3759,5 @@ $echo \"\$relink_command_output\" >&2 $rm \"\$progdir/\$file\" - exit $EXIT_FAILURE + exit 1 fi fi @@ -4936,5 +3769,5 @@ fi" else - $echo >> $output "\ + echo >> $output "\ program='$outputname' progdir=\"\$thisdir/$objdir\" @@ -4942,5 +3775,5 @@ fi - $echo >> $output "\ + echo >> $output "\ if test -f \"\$progdir/\$program\"; then" @@ -4953,5 +3786,5 @@ # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed + # The second colon is a workaround for a bug in BeOS R4 ${SED} $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` @@ -4973,4 +3806,12 @@ " case $host in + # win32 systems need to use the prog path for dll + # lookup to work + *-*-cygwin* | *-*-pw32*) + $echo >> $output "\ + exec \$progdir/\$program \${1+\"\$@\"} +" + ;; + # Backslashes separate directories on plain windows *-*-mingw | *-*-os2*) @@ -4982,5 +3823,9 @@ *) $echo >> $output "\ - exec \$progdir/\$program \${1+\"\$@\"} + # Export the path to the program. + PATH=\"\$progdir:\$PATH\" + export PATH + + exec \$program \${1+\"\$@\"} " ;; @@ -4988,5 +3833,5 @@ $echo >> $output "\ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit $EXIT_FAILURE + exit 1 fi else @@ -4994,6 +3839,6 @@ \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 \$echo \"This script is just a wrapper for \$program.\" 1>&2 - $echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit $EXIT_FAILURE + echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 fi fi\ @@ -5001,5 +3846,5 @@ chmod +x $output fi - exit $EXIT_SUCCESS + exit 0 ;; esac @@ -5017,5 +3862,5 @@ build_libtool_libs=no else - oldobjs="$old_deplibs $non_pic_objects" + oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` fi addlibs="$old_convenience" @@ -5024,77 +3869,65 @@ if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "mkdir $gentop" + $run mkdir "$gentop" + status=$? + if test $status -ne 0 && test ! -d "$gentop"; then + exit $status + fi generated="$generated $gentop" - func_extract_archives $gentop $addlibs - oldobjs="$oldobjs $func_extract_archives_result" + # Add in members from convenience archives. + for xlib in $addlibs; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" + status=$? + if test $status -ne 0 && test ! -d "$xdir"; then + exit $status + fi + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + + oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` + done fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - cmds=$old_archive_from_new_cmds + eval cmds=\"$old_archive_from_new_cmds\" else + # Ensure that we have .o objects in place in case we decided + # not to build a shared library, and have fallen back to building + # static libs even though --disable-static was passed! + for oldobj in $oldobjs; do + if test ! -f $oldobj; then + xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$oldobj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` + obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` + $show "(cd $xdir && ${LN_S} $obj $baseobj)" + $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? + fi + done + eval cmds=\"$old_archive_cmds\" - - if len=`expr "X$cmds" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - cmds=$old_archive_cmds - else - # the command line is too long to link in one step, link in parts - $echo "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs - # GNU ar 2.10+ was changed to match POSIX; thus no paths are - # encoded into archives. This makes 'ar r' malfunction in - # this piecewise linking case whenever conflicting object - # names appear in distinct ar calls; check, warn and compensate. - if (for obj in $save_oldobjs - do - $echo "X$obj" | $Xsed -e 's%^.*/%%' - done | sort | sort -uc >/dev/null 2>&1); then - : - else - $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2 - $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2 - AR_FLAGS=cq - fi - # Is there a better way of finding the last object in the list? - for obj in $save_oldobjs - do - last_oldobj=$obj - done - for obj in $save_oldobjs - do - oldobjs="$objlist $obj" - objlist="$objlist $obj" - eval test_cmds=\"$old_archive_cmds\" - if len=`expr "X$test_cmds" : ".*"` && - test "$len" -le "$max_cmd_len"; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - if test "$obj" = "$last_oldobj" ; then - RANLIB=$save_RANLIB - fi - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" - objlist= - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - if test "X$oldobjs" = "X" ; then - eval cmds=\"\$concat_cmds\" - else - eval cmds=\"\$concat_cmds~\$old_archive_cmds\" - fi - fi fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do - eval cmd=\"$cmd\" IFS="$save_ifs" $show "$cmd" @@ -5128,10 +3961,6 @@ done # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` - if test "$hardcode_automatic" = yes ; then - relink_command= - fi - # Only create the output if not a dry run. @@ -5152,5 +3981,5 @@ if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + exit 1 fi newdependency_libs="$newdependency_libs $libdir/$name" @@ -5166,5 +3995,5 @@ if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + exit 1 fi newdlfiles="$newdlfiles $libdir/$name" @@ -5177,28 +4006,9 @@ if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + exit 1 fi newdlprefiles="$newdlprefiles $libdir/$name" done dlprefiles="$newdlprefiles" - else - newdlfiles= - for lib in $dlfiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlfiles="$newdlfiles $abs" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlprefiles="$newdlprefiles $abs" - done - dlprefiles="$newdlprefiles" fi $rm $output @@ -5206,5 +4016,5 @@ tdlname=$dlname case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $echo > $output "\ @@ -5235,7 +4045,4 @@ installed=$installed -# Should we warn about portability when linking against -modules? -shouldnotlink=$module - # Files to dlopen/dlpreopen dlopen='$dlfiles' @@ -5244,5 +4051,5 @@ # Directory that this library needs to be installed in: libdir='$install_libdir'" - if test "$installed" = no && test "$need_relink" = yes; then + if test "$installed" = no && test $need_relink = yes; then $echo >> $output "\ relink_command=\"$relink_command\"" @@ -5257,5 +4064,5 @@ ;; esac - exit $EXIT_SUCCESS + exit 0 ;; @@ -5346,5 +4153,5 @@ $echo "$modename: you must specify an install program" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi @@ -5352,5 +4159,5 @@ $echo "$modename: the \`$prev' option requires an argument" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi @@ -5362,5 +4169,5 @@ fi $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi @@ -5380,8 +4187,8 @@ # Not a directory, so check to see that there is only one file specified. set dummy $files - if test "$#" -gt 2; then + if test $# -gt 2; then $echo "$modename: \`$dest' is not a directory" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi fi @@ -5395,5 +4202,5 @@ $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac @@ -5420,9 +4227,9 @@ *.la) # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi @@ -5456,22 +4263,19 @@ if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` + inst_prefix_dir=`$echo "$destdir" | sed "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. if test "$inst_prefix_dir" = "$destdir"; then $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 - exit $EXIT_FAILURE + exit 1 fi if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. - relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else - relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%%"` fi @@ -5481,5 +4285,5 @@ else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - exit $EXIT_FAILURE + exit 1 fi fi @@ -5503,5 +4307,5 @@ fi - if test "$#" -gt 0; then + if test $# -gt 0; then # Delete the old symlinks, and create new ones. for linkname @@ -5516,9 +4320,8 @@ # Do each command in the postinstall commands. lib="$destdir/$realname" - cmds=$postinstall_cmds + eval cmds=\"$postinstall_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" - eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? @@ -5560,5 +4363,5 @@ $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac @@ -5578,5 +4381,5 @@ $run eval "$install_prog \$staticobj \$staticdest" || exit $? fi - exit $EXIT_SUCCESS + exit 0 ;; @@ -5590,21 +4393,8 @@ fi - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext="" - case $file in - *.exe) - if test ! -f "$file"; then - file=`$echo $file|${SED} 's,.exe$,,'` - stripped_ext=".exe" - fi - ;; - esac - # Do a test to see if this is really a libtool program. case $host in *cygwin*|*mingw*) - wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` + wrapper=`echo $file | ${SED} -e 's,.exe$,,'` ;; *) @@ -5612,19 +4402,12 @@ ;; esac - if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then + if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then notinst_deplibs= relink_command= - # To insure that "foo" is sourced, and not "foo.exe", - # finese the cygwin/MSYS system by explicitly sourcing "foo." - # which disallows the automatic-append-.exe behavior. - case $build in - *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; - *) wrapperdot=${wrapper} ;; - esac # If there is no directory component, then add one. case $file in - */* | *\\*) . ${wrapperdot} ;; - *) . ./${wrapperdot} ;; + */* | *\\*) . $wrapper ;; + *) . ./$wrapper ;; esac @@ -5632,5 +4415,5 @@ if test -z "$notinst_deplibs"; then $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi @@ -5654,15 +4437,8 @@ relink_command= - # To insure that "foo" is sourced, and not "foo.exe", - # finese the cygwin/MSYS system by explicitly sourcing "foo." - # which disallows the automatic-append-.exe behavior. - case $build in - *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; - *) wrapperdot=${wrapper} ;; - esac # If there is no directory component, then add one. case $file in - */* | *\\*) . ${wrapperdot} ;; - *) . ./${wrapperdot} ;; + */* | *\\*) . $wrapper ;; + *) . ./$wrapper ;; esac @@ -5672,15 +4448,17 @@ tmpdir="/tmp" test -n "$TMPDIR" && tmpdir="$TMPDIR" - tmpdir="$tmpdir/libtool-$$" - save_umask=`umask` - umask 0077 - if $mkdir "$tmpdir"; then - umask $save_umask + tmpdir_mktemp=`mktemp -d $tmpdir/libtool-XXXXXX 2> /dev/null` + if test $? = 0 ; then + tmpdir="$tmpdir_mktemp" + unset tmpdir_mktemp + else + tmpdir="$tmpdir/libtool-$$" + fi + if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : else - umask $save_umask $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 continue fi - file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` + file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. @@ -5700,5 +4478,5 @@ else # Install the binary that we compiled earlier. - file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi @@ -5707,5 +4485,5 @@ # one anyways case $install_prog,$host in - */usr/bin/install*,*cygwin*) + /usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) @@ -5716,5 +4494,5 @@ ;; *:*.exe) - destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` + destfile=`echo $destfile | ${SED} -e 's,.exe$,,'` ;; esac @@ -5737,5 +4515,5 @@ $run eval "$install_prog \$file \$oldlib" || exit $? - if test -n "$stripme" && test -n "$old_striplib"; then + if test -n "$stripme" && test -n "$striplib"; then $show "$old_striplib $oldlib" $run eval "$old_striplib $oldlib" || exit $? @@ -5743,9 +4521,8 @@ # Do each command in the postinstall commands. - cmds=$old_postinstall_cmds + eval cmds=\"$old_postinstall_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" - eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? @@ -5761,7 +4538,7 @@ # Maybe just do a dry run. test -n "$run" && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + exec_cmd='$SHELL $0 --finish$current_libdirs' else - exit $EXIT_SUCCESS + exit 0 fi ;; @@ -5782,9 +4559,8 @@ if test -n "$finish_cmds"; then # Do each command in the finish commands. - cmds=$finish_cmds + eval cmds=\"$finish_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" - eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || admincmds="$admincmds @@ -5803,23 +4579,23 @@ # Exit here if they wanted silent mode. - test "$show" = : && exit $EXIT_SUCCESS - - $echo "----------------------------------------------------------------------" - $echo "Libraries have been installed in:" + test "$show" = ":" && exit 0 + + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" for libdir in $libdirs; do - $echo " $libdir" + echo " $libdir" done - $echo - $echo "If you ever happen to want to link against installed libraries" - $echo "in a given directory, LIBDIR, you must either use libtool, and" - $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - $echo "flag during linking and do at least one of the following:" + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then - $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - $echo " during execution" + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" fi if test -n "$runpath_var"; then - $echo " - add LIBDIR to the \`$runpath_var' environment variable" - $echo " during linking" + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then @@ -5827,17 +4603,17 @@ eval flag=\"$hardcode_libdir_flag_spec\" - $echo " - use the \`$flag' linker flag" + echo " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then - $echo " - have your system administrator run these commands:$admincmds" + echo " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then - $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi - $echo - $echo "See any operating system documentation about shared libraries for" - $echo "more information, such as the ld(1) and ld.so(8) manual pages." - $echo "----------------------------------------------------------------------" - exit $EXIT_SUCCESS + echo + echo "See any operating system documentation about shared libraries for" + echo "more information, such as the ld(1) and ld.so(8) manual pages." + echo "----------------------------------------------------------------------" + exit 0 ;; @@ -5851,5 +4627,5 @@ $echo "$modename: you must specify a COMMAND" 1>&2 $echo "$help" - exit $EXIT_FAILURE + exit 1 fi @@ -5859,5 +4635,5 @@ $echo "$modename: \`$file' is not a file" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi @@ -5866,9 +4642,9 @@ *.la) # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi @@ -5897,5 +4673,5 @@ else $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi ;; @@ -5937,5 +4713,5 @@ *) # Do a test to see if this is really a libtool program. - if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. case $file in @@ -5960,5 +4736,5 @@ fi - # Restore saved environment variables + # Restore saved enviroment variables if test "${save_LC_ALL+set}" = set; then LC_ALL="$save_LC_ALL"; export LC_ALL @@ -5969,5 +4745,5 @@ # Now prepare to actually exec the command. - exec_cmd="\"\$cmd\"$args" + exec_cmd="\$cmd$args" else # Display what would be done. @@ -5976,6 +4752,6 @@ $echo "export $shlibpath_var" fi - eval \$echo \"\$cmd\"$args - exit $EXIT_SUCCESS + $echo "$cmd$args" + exit 0 fi ;; @@ -6005,23 +4781,22 @@ $echo "$modename: you must specify an RM program" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi rmdirs= - origobjdir="$objdir" for file in $files; do dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` if test "X$dir" = "X$file"; then dir=. - objdir="$origobjdir" + objdir="$objdir" else - objdir="$dir/$origobjdir" + objdir="$dir/$objdir" fi name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - test "$mode" = uninstall && objdir="$dir" + test $mode = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates - if test "$mode" = clean; then + if test $mode = clean; then case " $rmdirs " in *" $objdir "*) ;; @@ -6047,5 +4822,5 @@ *.la) # Possibly a libtool archive, so verify it. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then . $dir/$name @@ -6055,17 +4830,16 @@ done test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - - if test "$mode" = uninstall; then + test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + + if test $mode = uninstall; then if test -n "$library_names"; then # Do each command in the postuninstall commands. - cmds=$postuninstall_cmds + eval cmds=\"$postuninstall_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" - eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then + if test $? != 0 && test "$rmforce" != yes; then exit_status=1 fi @@ -6076,12 +4850,11 @@ if test -n "$old_library"; then # Do each command in the old_postuninstall commands. - cmds=$old_postuninstall_cmds + eval cmds=\"$old_postuninstall_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" - eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then + if test $? != 0 && test "$rmforce" != yes; then exit_status=1 fi @@ -6095,50 +4868,20 @@ *.lo) - # Possibly a libtool object, so verify it. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - - # Read the .lo file - . $dir/$name - - # Add PIC object to the list of files to remove. - if test -n "$pic_object" \ - && test "$pic_object" != none; then - rmfiles="$rmfiles $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" \ - && test "$non_pic_object" != none; then - rmfiles="$rmfiles $dir/$non_pic_object" - fi + if test "$build_old_libs" = yes; then + oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` + rmfiles="$rmfiles $dir/$oldobj" fi ;; *) - if test "$mode" = clean ; then - noexename=$name - case $file in - *.exe) - file=`$echo $file|${SED} 's,.exe$,,'` - noexename=`$echo $name|${SED} 's,.exe$,,'` - # $file with .exe has already been added to rmfiles, - # add $file without .exe - rmfiles="$rmfiles $file" - ;; - esac - # Do a test to see if this is a libtool program. - if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - relink_command= - . $dir/$noexename - - # note $name still contains .exe if it was in $file originally - # as does the version of $file that was added into $rmfiles - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" - fi - if test "X$noexename" != "X$name" ; then - rmfiles="$rmfiles $objdir/lt-${noexename}.c" - fi + # Do a test to see if this is a libtool program. + if test $mode = clean && + (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$file + + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" fi fi @@ -6148,5 +4891,4 @@ $run $rm $rmfiles || exit_status=1 done - objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files @@ -6164,5 +4906,5 @@ $echo "$modename: you must specify a MODE" 1>&2 $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac @@ -6171,5 +4913,5 @@ $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi fi # test -z "$show_help" @@ -6177,5 +4919,5 @@ if test -n "$exec_cmd"; then eval exec $exec_cmd - exit $EXIT_FAILURE + exit 1 fi @@ -6196,5 +4938,4 @@ --quiet same as \`--silent' --silent don't print informational messages - --tag=TAG use configuration variables from tag TAG --version print version information @@ -6210,8 +4951,6 @@ MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE. - -Report bugs to ." - exit $EXIT_SUCCESS +a more detailed description of MODE." + exit 0 ;; @@ -6324,7 +5063,4 @@ -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects - -precious-files-regex REGEX - don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR @@ -6368,32 +5104,12 @@ $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac -$echo +echo $echo "Try \`$modename --help' for more information about other modes." -exit $EXIT_SUCCESS - -# The TAGs below are defined such that we never get into a situation -# in which we disable both kinds of libraries. Given conflicting -# choices, we go for a static library, that is the most portable, -# since we can't tell whether shared libraries were disabled because -# the user asked for that or because the platform doesn't support -# them. This is particularly important on AIX, because we don't -# support having both static and shared libraries enabled at the same -# time on that platform, so we default to a shared-only configuration. -# If a disable-shared tag is given, we'll fallback to a static-only -# configuration. But we'll never go from static-only to shared-only. - -# ### BEGIN LIBTOOL TAG CONFIG: disable-shared -build_libtool_libs=no -build_old_libs=yes -# ### END LIBTOOL TAG CONFIG: disable-shared - -# ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac` -# ### END LIBTOOL TAG CONFIG: disable-static +exit 0 # Local Variables: