Index: /branches/czw_branch/20130702/ippconfig/Makefile.am =================================================================== --- /branches/czw_branch/20130702/ippconfig/Makefile.am (revision 35882) +++ /branches/czw_branch/20130702/ippconfig/Makefile.am (revision 35883) @@ -20,5 +20,6 @@ lulin \ ssp \ - uh8k + uh8k \ + suprime install_files = \ Index: /branches/czw_branch/20130702/ippconfig/configure.ac =================================================================== --- /branches/czw_branch/20130702/ippconfig/configure.ac (revision 35882) +++ /branches/czw_branch/20130702/ippconfig/configure.ac (revision 35883) @@ -32,4 +32,5 @@ ssp/Makefile uh8k/Makefile + suprime/Makefile ]) AC_OUTPUT Index: /branches/czw_branch/20130702/ippconfig/suprime/Makefile =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/Makefile (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/Makefile (revision 35883) @@ -0,0 +1,331 @@ +# Makefile.in generated by automake 1.10.2 from Makefile.am. +# suprime/Makefile. Generated from Makefile.in by configure. + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + + + +pkgdatadir = $(datadir)/ippconfig +pkglibdir = $(libdir)/ippconfig +pkgincludedir = $(includedir)/ippconfig +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = suprime +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__installdirs = "$(DESTDIR)$(installdir)" +installDATA_INSTALL = $(INSTALL_DATA) +DATA = $(install_DATA) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = ${SHELL} /data/ippc18.0/home/watersc1/ipp/trunk/ippconfig/missing --run aclocal-1.10 +AMTAR = ${SHELL} /data/ippc18.0/home/watersc1/ipp/trunk/ippconfig/missing --run tar +AUTOCONF = ${SHELL} /data/ippc18.0/home/watersc1/ipp/trunk/ippconfig/missing --run autoconf +AUTOHEADER = ${SHELL} /data/ippc18.0/home/watersc1/ipp/trunk/ippconfig/missing --run autoheader +AUTOMAKE = ${SHELL} /data/ippc18.0/home/watersc1/ipp/trunk/ippconfig/missing --run automake-1.10 +AWK = gawk +CYGPATH_W = echo +DEFS = -DPACKAGE_NAME=\"ippConfig\" -DPACKAGE_TARNAME=\"ippconfig\" -DPACKAGE_VERSION=\"1.1.0\" -DPACKAGE_STRING=\"ippConfig\ 1.1.0\" -DPACKAGE_BUGREPORT=\"ipp-support@ifa.hawaii.edu\" -DPACKAGE=\"ippconfig\" -DVERSION=\"1.1.0\" +ECHO_C = +ECHO_N = -n +ECHO_T = +INSTALL = /usr/bin/install -c +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_PROGRAM = ${INSTALL} +INSTALL_SCRIPT = ${INSTALL} +INSTALL_STRIP_PROGRAM = $(install_sh) -c -s +LIBOBJS = +LIBS = +LTLIBOBJS = +MAINT = # +MAKEINFO = ${SHELL} /data/ippc18.0/home/watersc1/ipp/trunk/ippconfig/missing --run makeinfo +MKDIR_P = /usr/bin/mkdir -p +PACKAGE = ippconfig +PACKAGE_BUGREPORT = ipp-support@ifa.hawaii.edu +PACKAGE_NAME = ippConfig +PACKAGE_STRING = ippConfig 1.1.0 +PACKAGE_TARNAME = ippconfig +PACKAGE_VERSION = 1.1.0 +PATH_SEPARATOR = : +SET_MAKE = +SHELL = /bin/sh +STRIP = +VERSION = 1.1.0 +abs_builddir = /data/ippc18.0/home/watersc1/ipp/trunk/ippconfig/suprime +abs_srcdir = /data/ippc18.0/home/watersc1/ipp/trunk/ippconfig/suprime +abs_top_builddir = /data/ippc18.0/home/watersc1/ipp/trunk/ippconfig +abs_top_srcdir = /data/ippc18.0/home/watersc1/ipp/trunk/ippconfig +am__leading_dot = . +am__tar = ${AMTAR} chof - "$$tardir" +am__untar = ${AMTAR} xf - +bindir = /home/panstarrs/watersc1/ipp/install/default.lin64/bin +build_alias = +builddir = . +datadir = /home/panstarrs/watersc1/ipp/install/default.lin64/share +datarootdir = ${prefix}/share +docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} +dvidir = ${docdir} +exec_prefix = ${prefix} +host_alias = +htmldir = ${docdir} +includedir = /home/panstarrs/watersc1/ipp/install/default.lin64/include +infodir = ${datarootdir}/info +install_sh = $(SHELL) /data/ippc18.0/home/watersc1/ipp/trunk/ippconfig/install-sh +libdir = /home/panstarrs/watersc1/ipp/install/default.lin64/lib +libexecdir = ${exec_prefix}/libexec +localedir = ${datarootdir}/locale +localstatedir = ${prefix}/var +mandir = /home/panstarrs/watersc1/ipp/install/default.lin64/man +mkdir_p = /usr/bin/mkdir -p +oldincludedir = /usr/include +pdfdir = ${docdir} +prefix = /home/panstarrs/watersc1/ipp/install/default.lin64 +program_transform_name = s,x,x, +psdir = ${docdir} +sbindir = ${exec_prefix}/sbin +sharedstatedir = ${prefix}/com +srcdir = . +sysconfdir = /home/panstarrs/watersc1/ipp/install/default.lin64/etc +target_alias = +top_build_prefix = ../ +top_builddir = .. +top_srcdir = .. +installdir = $(datadir)/ippconfig/suprime +install_files = \ + dvo.config \ + dvo.layout \ + camera.config \ + format_raw.config \ + format_mef.config \ + format_split.config \ + ppImage.config \ + ppMerge.config \ + psastro.config \ + psphot.config \ + pswarp.config \ + ppStack.config \ + rejections.config + +install_DATA = $(install_files) +EXTRA_DIST = $(install_files) +ACLOCAL_AMFLAGS = -I m4 +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign suprime/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign suprime/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: # $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): # $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +install-installDATA: $(install_DATA) + @$(NORMAL_INSTALL) + test -z "$(installdir)" || $(MKDIR_P) "$(DESTDIR)$(installdir)" + @list='$(install_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ + echo " $(installDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(installdir)/$$f'"; \ + $(installDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(installdir)/$$f"; \ + done + +uninstall-installDATA: + @$(NORMAL_UNINSTALL) + @list='$(install_DATA)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(installdir)/$$f'"; \ + rm -f "$(DESTDIR)$(installdir)/$$f"; \ + done +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) +installdirs: + for dir in "$(DESTDIR)$(installdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +info: info-am + +info-am: + +install-data-am: install-installDATA + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-data-hook + +install-dvi: install-dvi-am + +install-exec-am: + +install-html: install-html-am + +install-info: install-info-am + +install-man: + +install-pdf: install-pdf-am + +install-ps: install-ps-am + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-installDATA + +.MAKE: install-am install-data-am install-strip + +.PHONY: all all-am check check-am clean clean-generic distclean \ + distclean-generic distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am \ + install-data-hook install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-installDATA install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am uninstall uninstall-am uninstall-installDATA + + +install-data-hook: + chmod 0755 $(installdir) +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: Index: /branches/czw_branch/20130702/ippconfig/suprime/Makefile.am =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/Makefile.am (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/Makefile.am (revision 35883) @@ -0,0 +1,26 @@ + +installdir = $(datadir)/ippconfig/suprime + +install_files = \ + dvo.config \ + dvo.layout \ + camera.config \ + format_raw.config \ + format_mef.config \ + format_split.config \ + ppImage.config \ + ppMerge.config \ + psastro.config \ + psphot.config \ + pswarp.config \ + ppStack.config \ + rejections.config + +install_DATA = $(install_files) + +install-data-hook: + chmod 0755 $(installdir) + +EXTRA_DIST = $(install_files) + +ACLOCAL_AMFLAGS = -I m4 Index: /branches/czw_branch/20130702/ippconfig/suprime/Makefile.in =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/Makefile.in (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/Makefile.in (revision 35883) @@ -0,0 +1,331 @@ +# Makefile.in generated by automake 1.10.2 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = suprime +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__installdirs = "$(DESTDIR)$(installdir)" +installDATA_INSTALL = $(INSTALL_DATA) +DATA = $(install_DATA) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +installdir = $(datadir)/ippconfig/suprime +install_files = \ + dvo.config \ + dvo.layout \ + camera.config \ + format_raw.config \ + format_mef.config \ + format_split.config \ + ppImage.config \ + ppMerge.config \ + psastro.config \ + psphot.config \ + pswarp.config \ + ppStack.config \ + rejections.config + +install_DATA = $(install_files) +EXTRA_DIST = $(install_files) +ACLOCAL_AMFLAGS = -I m4 +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign suprime/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign suprime/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +install-installDATA: $(install_DATA) + @$(NORMAL_INSTALL) + test -z "$(installdir)" || $(MKDIR_P) "$(DESTDIR)$(installdir)" + @list='$(install_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ + echo " $(installDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(installdir)/$$f'"; \ + $(installDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(installdir)/$$f"; \ + done + +uninstall-installDATA: + @$(NORMAL_UNINSTALL) + @list='$(install_DATA)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(installdir)/$$f'"; \ + rm -f "$(DESTDIR)$(installdir)/$$f"; \ + done +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) +installdirs: + for dir in "$(DESTDIR)$(installdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +info: info-am + +info-am: + +install-data-am: install-installDATA + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-data-hook + +install-dvi: install-dvi-am + +install-exec-am: + +install-html: install-html-am + +install-info: install-info-am + +install-man: + +install-pdf: install-pdf-am + +install-ps: install-ps-am + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-installDATA + +.MAKE: install-am install-data-am install-strip + +.PHONY: all all-am check check-am clean clean-generic distclean \ + distclean-generic distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am \ + install-data-hook install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-installDATA install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am uninstall uninstall-am uninstall-installDATA + + +install-data-hook: + chmod 0755 $(installdir) +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: Index: /branches/czw_branch/20130702/ippconfig/suprime/camera.config =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/camera.config (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/camera.config (revision 35883) @@ -0,0 +1,146 @@ +# Camera configuration file for MegaCam: describes the camera + +# File formats that we know about +FORMATS METADATA + RAW STR suprime/format_raw.config + MEF STR suprime/format_mef.config +END + +# Description of camera --- all the chips and the cells that comprise them +FPA METADATA + XY01 STR Cell + XY11 STR Cell + XY21 STR Cell + XY00 STR Cell + XY10 STR Cell + XY20 STR Cell + XY41 STR Cell + XY31 STR Cell + XY40 STR Cell + XY30 STR Cell +END + +# move this elsewhere? we need a lookup table to go from filter ID to abstract name +FILTER.ID METADATA + Rc STR W-C-RC + + u STR u.MP9301 + g STR g.MP9401 + r STR r.MP9601 + i MULTI + i STR i.MP9701 + i STR i.MP9702 + z MULTI + z STR z.MP9801 + z STR Zp + z STR Zprime + + Ha MULTI + Ha STR Ha.MP7605 + Ha STR Halpha + Ha STR Haalpha.on + HaOff STR HaOFF.MP7604 + + CN MULTI + CN STR CN.MP780 + CN STR cn.MP7803 + CN STR CN.MP7803 + + TiO MULTI + TiO STR TiO.MP77 + TiO STR tio.MP7701 + TiO STR TiO.MP7701 + NB920 STR NB920 + + B2F STR B2F + Bj STR Bj + Vj STR Vj + Rj STR Rj + Ij STR Ij + Hb STR Hb + HbOff STR HbOff +END + +# Table of strings to use for the class identifier (see ippdb) according to the file level. +CLASSID METADATA + FPA STR fpa + CHIP STR {CHIP.NAME} + CELL STR {CHIP.NAME}:{CELL.NAME} + fpa STR fpa + chip STR {CHIP.NAME} + cell STR {CHIP.NAME}:{CELL.NAME} +END + +DVO.CAMERADIR STR suprime # Camera directory for DVO + +# convert supplied FPA.OBSTYPE values to abstract exptype names +OBSTYPE.TABLE METADATA + bias STR BIAS + zero STR BIAS + dark STR DARK + flat STR SKYFLAT + skyflat STR SKYFLAT + domeflat STR DOMEFLAT + object STR OBJECT + science STR OBJECT +END + +# Recipe options +RECIPES METADATA + # Other recipes + PSPHOT STR suprime/psphot.config # psphot details + PSASTRO STR suprime/psastro.config # psastro details + PSWARP STR suprime/pswarp.config # pswarp details + PPIMAGE STR suprime/ppImage.config # ppImage recipe + REJECTIONS STR suprime/rejections.config # rejection recipe + PPMERGE STR suprime/ppMerge.config # ppMerge recipe + PPSTACK STR suprime/ppStack.config # ppStack recipe +END + +# reduction classes (recipes which are grouped together) +REDUCTION STR recipes/reductionClasses.mdc + +FITSTYPES STR recipes/fitstypes.mdc + +FILERULES STR recipes/filerules-mef.mdc # File rules appropriate for MEF format + +EXTNAME.RULES METADATA + CMF.HEAD STR {CHIP.NAME}.hdr + CMF.DATA STR {CHIP.NAME}.psf # use .PSF and .EXT? + CMF.XSRC STR {CHIP.NAME}.xsrc # use .PSF and .EXT? + CMF.XFIT STR {CHIP.NAME}.xfit # use .PSF and .EXT? + CMF.XRAD STR {CHIP.NAME}.xrad # use .PSF and .EXT? + CMF.DETEFF STR {CHIP.NAME}.deteff + + PSF.HEAD STR {CHIP.NAME}.hdr + PSF.TABLE STR {CHIP.NAME}.psf_model + PSF.RESID STR {CHIP.NAME}.psf_resid + + REF.ASTROM STR {CHIP.NAME}.ref_astrom +END + +BLANK.HEADERS METADATA + FPA.TIME STR MJD + FPA.EXPOSURE STR EXPTIME + FPA.AIRMASS STR AIRMASS + FPA.OBS STR EXP-ID +END + +PHOTCODE.RULE STR {DETECTOR}.{FILTER.ID}.{CHIP.N} # Rule for generating photcode + +BURNTOOL.STATE.GOOD S16 0 # Value for burntool_state with the most recent bt version. +BURNTOOL.STATE.GOOD.UPDATE S16 0 # for upddate processing accept earlier version + +FOV_REF F32 0 # Field of view of unvignetted region in FPA pixels. +FOV_MAX F32 0 +NPIX_REF S32 0 +NPIX_MAX S32 0 +NPIX_INTERCHIP S32 0 + +# This sets the maximum size for the fwhm_major. This is roughly 3", and 98.67% of all exposures in the database are less than this. +MAX_ALLOWED_FWHM F32 25 + +# don't censor any masked pixels +MASK.NO.CENSOR U32 4294967295 + +METADATA.COMPRESSION STR 7f # compression mode (nM): n = 1-9, M = f (filtered), h (Huffman), R (run-length) Index: /branches/czw_branch/20130702/ippconfig/suprime/dvo.config =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/dvo.config (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/dvo.config (revision 35883) @@ -0,0 +1,70 @@ + +# location of DVO database tables +CATDIR /data/alala.0/eugene/isp/catdir + +# word used to identify photcodes belonging to this camera +MOSAICNAME SUPRIMECAM + +# keywords used by DVO to interpret the headers + +# keyword abstractions: +#DATE-KEYWORD DATE-OBS +#DATE-MODE yyyy-mm-dd +#UT-KEYWORD UTC-OBS +JD-KEYWORD NONE +MJD-KEYWORD MJD + +# other keyword abstractions +EXPTIME-KEYWORD EXPTIME +AIRMASS-KEYWORD AIRMASS +CCDNUM-KEYWORD DET-ID +ST-KEYWORD NONE +OBSERVATORY-LATITUDE NONE +OBSERVATORY-LONGITUDE NONE +SUBPIX_DATAFILE NONE + +# instrumental magnitude range for calibration mode +CAL_INSTMAG_MAX 0 +CAL_INSTMAG_MIN 0 + +# exclude overscan region from the dB image boundaries +XOVERSCAN 0 +YOVERSCAN 0 + +# only upload stars within region; a value of 0 means ignore the limit +ADDSTAR_XMIN 0 +ADDSTAR_XMAX 0 +ADDSTAR_YMIN 0 +ADDSTAR_YMAX 0 + +# exclude stars with SN > SNLIMIT (ADDSTAR_SNLIMIT overrides old name MIN_SN_FSTAT) +ADDSTAR_SNLIMIT 0 + +# correlation radius (arcseconds) +ADDSTAR_RADIUS 1.0 + +# scaled correlation radius +ADDSTAR_NSIGMA 0 + +IMAGE_SCATTER 0.075 # mark images POOR if stdev(Mcal) > IMAGE_SCATTER +STAR_SCATTER 0.005 # mark stars POOR if stdev(Mrel) > STAR_SCATTER +IMAGE_OFFSET 0.100 # mark images POOR if abs(delta(Mcal)) > IMAGE_OFFSET +STAR_CHISQ 10.0 # mark stars POOR if Xm > STAR_CHISQ +STAR_TOOFEW 3 # mark star FEW if N(good) < STAR_TOOFEW +IMAGE_TOOFEW 10 # mark image FEW if N(good) < IMAGE_TOOFEW +IMAGE_GOOD_FRACTION 0.05 # mark image FEW if N(good) < IMAGE_GOOD_FRACTION * Nstars + +SCATTER_LIM 15.0 +MAG_LIM 20.0 # select stars brighter than this for relphot analysis +SIGMA_LIM 0.015 # select measurements with dM < SIGMA_LIM for relphot analysis +# INST_MAG_MIN -17 # optional constraints on magnitude ranges +# INST_MAG_MAX -13 # optional constraints on magnitude ranges + +RELPHOT_GRID_BINNING 256 +RELPHOT_GRID_X 6 +RELPHOT_GRID_Y 14 + +PM_DT_MIN 0.25 +PM_TOOFEW 4 +POS_TOOFEW 1 + Index: /branches/czw_branch/20130702/ippconfig/suprime/dvo.layout =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/dvo.layout (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/dvo.layout (revision 35883) @@ -0,0 +1,27 @@ +# this file defines the layout of the mosaic imager: + +# NCCD 40 # this needs work: sometimes 36, sometimes 40 +NCCD 10 +NAXIS1 2048 +NAXIS2 4225 + +MOSAIC_X 5 +MOSAIC_Y 2 + +# lines need to contain: + +CHIPID_KEYWORD EXTNAME + +# ID CHIPID xoffset yoffset xflip yflip datasec biassec Xo Yo theta +nausicaa XY01 23 3 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +kiki XY11 2121 2 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +fio XY21 4221 0 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +sophie XY00 0 4207 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +sheeta XY10 2095 4229 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +satsuki XY20 4208 4254 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +chihiro XY41 8429 65 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +clarisse XY31 6337 26 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +ponyo XY40 8405 4253 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +san XY30 6315 4252 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +# can we use header to find biassec +USE_BIASSEC 1 Index: /branches/czw_branch/20130702/ippconfig/suprime/format_mef.config =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/format_mef.config (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/format_mef.config (revision 35883) @@ -0,0 +1,175 @@ +# The spliced MecaCam data is stored in single extensions for each chip + +# How to recognise this type +RULE METADATA + TELESCOP STR Subaru +# DETECTOR STR MegaCam + INSTRUME STR SuprimeCam + NAXIS S32 2 + EXTEND BOOL T +#x HISTORY STR imsplice: Splicing results in all detectors as if read from A amplifier +END + +FILE METADATA + # How to read this data + PHU STR CHIP # The FITS file represents an entire FPA + EXTENSIONS STR NONE # The extensions represent chips + FPA.OBS STR EXP-ID # A PHU keyword for unique identifier + # CHIP.NAME STR EXTNAME # An extension keyword for unique identifie +END + +# What's in the FITS file? +CONTENTS METADATA + # Extension name, chipName:chipType + nausicaa STR XY01:spcam20080721 + kiki STR XY11:spcam20080721 + fio STR XY21:spcam20080721 + sophie STR XY00:spcam20080721 + sheeta STR XY10:spcam20080721 + satsuki STR XY20:spcam20080721 + chihiro STR XY41:spcam20080721 + clarisse STR XY31:spcam20080721 + ponyo STR XY40:spcam20080721 + san STR XY30:spcam20080721 +END + +# Specify the chips +CHIPS METADATA + # Chip type, cellName:cellType + spcam20080721 STR cell:cell +END + + +# Specify the cells +CELLS METADATA + # Cell type, concepts to use + cell METADATA + CELL.BIASSEC.SOURCE STR VALUE + CELL.TRIMSEC.SOURCE STR VALUE + CELL.BIASSEC STR [521:568,1:48] + CELL.TRIMSEC STR [520:2264,49:4225] + CELL.X0 S32 0 + CELL.GAIN.SOURCE STR HEADER + CELL.GAIN STR GAIN + END +END + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.OBS STR EXP-ID + FPA.AIRMASS STR AIRMASS + FPA.FILTERID STR FILTER01 + FPA.FILTER STR FILTER01 + FPA.OBSTYPE STR DATA-TYP + FPA.OBJECT STR OBJECT + FPA.TIME STR MJD + FPA.RA STR RA + FPA.DEC STR DEC + FPA.RADECSYS STR RADECSYS + FPA.POSANGLE STR INST-PA + FPA.FOCUS STR TELFOCUS # added at start of 03Am04 + FPA.ALT STR ALTITUDE + FPA.AZ STR AZIMUTH + FPA.TEMP STR DET-TMP + FPA.EXPOSURE STR EXPTIME + FPA.ZP STR ZPT_OBS + CHIP.TEMP STR DET-TMP + CELL.EXPOSURE STR EXPTIME + CELL.DARKTIME STR DARKTIME + CELL.READNOISE STR RDNOISE + CELL.TIME STR MJD + CELL.XBIN STR BIN-FCT1 + CELL.YBIN STR BIN-FCT2 +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA + FPA.TELESCOPE STR Subaru + FPA.INSTRUMENT STR SuprimeCam + FPA.DETECTOR STR kiki +# FPA.TIMESYS STR + CHIP.XSIZE S32 2048 + CHIP.YSIZE S32 4224 + CELL.XSIZE S32 2048 + CELL.YSIZE S32 4224 + CELL.XWINDOW S32 0 + CELL.YWINDOW S32 0 + CELL.READDIR S32 1 # Cell is read in x direction + CELL.SATURATION F32 50000.0 + CELL.BAD F32 0 + CELL.XPARITY S32 1 + CELL.YPARITY S32 1 + CELL.Y0 S32 0 +# CELL.TIMESYS STR UTC + CELL.TRIMSEC STR [1:2264,49:4225] + CHIP.X0.DEPEND STR CHIP.NAME + CHIP.X0 METADATA + XY01 S32 23 + XY11 S32 2121 + XY21 S32 4221 + XY00 S32 0 + XY10 S32 2095 + XY20 S32 4208 + XY41 S32 8429 + XY31 S32 6337 + XY40 S32 8405 + XY30 S32 6315 + END + + CHIP.Y0.DEPEND STR CHIP.NAME + CHIP.Y0 METADATA + XY01 S32 3 + XY11 S32 2 + XY21 S32 0 + XY00 S32 4207 + XY10 S32 4229 + XY20 S32 4254 + XY41 S32 65 + XY31 S32 26 + XY40 S32 4253 + XY30 S32 4252 + END + + CHIP.XPARITY.DEPEND STR CHIP.NAME + CHIP.XPARITY METADATA + XY01 S32 -1 + XY11 S32 -1 + XY21 S32 -1 + XY00 S32 -1 + XY10 S32 -1 + XY20 S32 -1 + XY41 S32 -1 + XY31 S32 -1 + XY40 S32 -1 + XY30 S32 -1 + END + + CHIP.YPARITY.DEPEND STR CHIP.NAME + CHIP.YPARITY METADATA + XY01 S32 1 + XY11 S32 1 + XY21 S32 1 + XY00 S32 1 + XY10 S32 1 + XY20 S32 1 + XY41 S32 1 + XY31 S32 1 + XY40 S32 1 + XY30 S32 1 + END +END + + +# How to translation PS concepts into database lookups +DATABASE METADATA +# CELL.GAIN STR SELECT gain FROM camera WHERE chip_id = '{CHIP.NAME}' AND cell_id = '{CELL.NAME}' +END + +# Where there might be some ambiguity, specify the format +FORMATS METADATA + FPA.RA STR HOURS + FPA.DEC STR DEGREES + FPA.TIME STR MJD + CELL.TIME STR MJD +END + Index: /branches/czw_branch/20130702/ippconfig/suprime/format_raw.config =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/format_raw.config (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/format_raw.config (revision 35883) @@ -0,0 +1,193 @@ +# The split MecaCam data is stored as single files for each chip, each a simple fits image + +# How to recognise this type +RULE METADATA + TELESCOP STR Subaru +# DETECTOR STR kiki + INSTRUME STR SuprimeCam + NAXIS S32 2 +END + +FILE METADATA + # How to read this data + PHU STR CHIP # The FITS file represents a chip + EXTENSIONS STR NONE # There are no extensions + FPA.OBS STR EXP-ID # A PHU keyword for unique identifier + CONTENT STR DETECTOR # Key to the CONTENTS menu + CHIP.NAME STR DETECTOR + CONTENT.RULE STR {CHIP.NAME} # How to derive the CONTENT when writing +END + +# What's in the FITS file? +CONTENTS METADATA + # Content name, chipType + nausicaa STR XY01:spcam20080721 + kiki STR XY11:spcam20080721 + fio STR XY21:spcam20080721 + sophie STR XY00:spcam20080721 + sheeta STR XY10:spcam20080721 + satsuki STR XY20:spcam20080721 + chihiro STR XY41:spcam20080721 + clarisse STR XY31:spcam20080721 + ponyo STR XY40:spcam20080721 + san STR XY30:spcam20080721 +END + +# Specify the chips +CHIPS METADATA + # Chip type, cellName:cellType + spcam20080721 STR Cell:cell +# spcam20080721 STR Cell:amplifier + +END + + +# Specify the cells +CELLS METADATA + # Cell type, concepts for this type + cell METADATA + CELL.BIASSEC.SOURCE STR VALUE + CELL.TRIMSEC.SOURCE STR VALUE + CELL.BIASSEC STR [521:568,1:48] + CELL.TRIMSEC STR [1:2264,1:4225] + CELL.X0 S32 0 + CELL.GAIN.SOURCE STR HEADER + CELL.GAIN STR GAIN + END +END + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.OBS STR EXP-ID + FPA.DETECTOR STR DETECTOR + FPA.AIRMASS STR AIRMASS + FPA.FILTER STR FILTER01 + FPA.FILTERID STR FILTER01 + FPA.POSANGLE STR INST-PA + FPA.RA STR RA + FPA.DEC STR DEC + FPA.RADECSYS STR RADECSYS + FPA.OBSTYPE STR DATA-TYP + FPA.OBJECT STR OBJECT + FPA.FOCUS STR TELFOCUS + FPA.TIME STR MJD + FPA.TIMESYS STR TIMESYS + FPA.ALT STR ALTITUDE + FPA.AZ STR AZIMUTH + FPA.TEMP STR DET-TMP + FPA.EXPOSURE STR EXPTIME + CHIP.TEMP STR DET-TMP + CELL.EXPOSURE STR EXPTIME + CELL.DARKTIME STR DARKTIME + CELL.READNOISE STR RDNOISE + CELL.TIME STR MJD + CELL.TIMESYS STR TIMESYS + CELL.XBIN STR BIN-FCT1 + CELL.YBIN STR BIN-FCT2 +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA + FPA.TELESCOPE STR Subaru + FPA.INSTRUMENT STR SuprimeCam + CHIP.XSIZE S32 2048 + CHIP.YSIZE S32 4224 + CELL.XSIZE S32 2048 + CELL.YSIZE S32 4224 + CELL.XWINDOW S32 0 + CELL.YWINDOW S32 0 + CELL.SATURATION S32 60000 + CELL.READDIR S32 1 # Cell is read in x direction + CELL.SATURATION F32 50000.0 + CELL.BAD F32 0 + CELL.XPARITY S32 1 + CELL.YPARITY S32 1 + CELL.Y0 S32 0 + CELL.TRIMSEC STR [1:2264,1:4225] + CHIP.X0.DEPEND STR CHIP.NAME +# nausicaa STR XY01:spcam20080721 +# kiki STR XY11:spcam20080721 +# fio STR XY21:spcam20080721 +# sophie STR XY00:spcam20080721 +# sheeta STR XY10:spcam20080721 +# satsuki STR XY20:spcam20080721 +# chihiro STR XY41:spcam20080721 +# clarisse STR XY31:spcam20080721 +# ponyo STR XY40:spcam20080721 +# san STR XY30:spcam20080721 + + CHIP.X0 METADATA + XY01 S32 23 + XY11 S32 2121 + XY21 S32 4221 + XY00 S32 0 + XY10 S32 2095 + XY20 S32 4208 + XY41 S32 8429 + XY31 S32 6337 + XY40 S32 8405 + XY30 S32 6315 + END + CHIP.Y0.DEPEND STR CHIP.NAME + CHIP.Y0 METADATA + XY01 S32 3 + XY11 S32 2 + XY21 S32 0 + XY00 S32 4207 + XY10 S32 4229 + XY20 S32 4254 + XY41 S32 65 + XY31 S32 26 + XY40 S32 4253 + XY30 S32 4252 + END + + CHIP.XPARITY.DEPEND STR CHIP.NAME + CHIP.XPARITY METADATA + XY01 S32 -1 + XY11 S32 -1 + XY21 S32 -1 + XY00 S32 -1 + XY10 S32 -1 + XY20 S32 -1 + XY41 S32 -1 + XY31 S32 -1 + XY40 S32 -1 + XY30 S32 -1 + END + CHIP.YPARITY.DEPEND STR CHIP.NAME + CHIP.YPARITY METADATA + XY01 S32 1 + XY11 S32 1 + XY21 S32 1 + XY00 S32 1 + XY10 S32 1 + XY20 S32 1 + XY41 S32 1 + XY31 S32 1 + XY40 S32 1 + XY30 S32 1 + END +END + + +# How to translation PS concepts into database lookups +DATABASE METADATA + TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS +# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME +# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME + +# A database entry refers to a particular column (COLUMN) in a +# particular table (TABLE), given certain PS concepts (GIVENPS) that +# match certain database columns (GIVENDBCOL). +END + + +# Where there might be some ambiguity, specify the format +FORMATS METADATA + FPA.RA STR HOURS + FPA.DEC STR DEGREES + FPA.TIME STR MJD + CELL.TIME STR MJD +END + Index: /branches/czw_branch/20130702/ippconfig/suprime/format_split.config =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/format_split.config (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/format_split.config (revision 35883) @@ -0,0 +1,189 @@ +# The split MecaCam data is stored as single files for each chip, each a simple fits image + +# How to recognise this type +RULE METADATA + TELESCOP STR Subaru +# DETECTOR STR kiki + INSTRUME STR SuprimeCam + NAXIS S32 2 +END + +FILE METADATA + # How to read this data + PHU STR CHIP # The FITS file represents an entire FPA + EXTENSIONS STR NONE # The extensions represent chips + FPA.OBS STR EXP-ID # A PHU keyword for unique identifier + CONTENT STR DETECTOR # Key to the CONTENTS menu + CONTENT.RULE STR {CHIP.NAME} # How to derive the CONTENT when writing +END + +# What's in the FITS file? +CONTENTS METADATA + # Content name, chipType + nausicaa STR XY01:spcam20080721 + kiki STR XY11:spcam20080721 + fio STR XY21:spcam20080721 + sophie STR XY00:spcam20080721 + sheeta STR XY10:spcam20080721 + satsuki STR XY20:spcam20080721 + chihiro STR XY41:spcam20080721 + clarisse STR XY31:spcam20080721 + ponyo STR XY40:spcam20080721 + san STR XY30:spcam20080721 +END + +# Specify the chips +CHIPS METADATA + # Chip type, cellName:cellType + spcam20080721 STR cell:cell +END + + +# Specify the cells +CELLS METADATA + # Cell type, concepts for this type + cell METADATA + CELL.BIASSEC.SOURCE STR VALUE + CELL.TRIMSEC.SOURCE STR VALUE + CELL.BIASSEC STR [521:568,1:48] + CELL.TRIMSEC STR [520:2264,49:4225] + CELL.X0 S32 0 + CELL.GAIN.SOURCE STR HEADER + CELL.GAIN STR GAIN + END +END + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.OBS STR EXP-ID + FPA.AIRMASS STR AIRMASS + FPA.FILTER STR FILTER01 + FPA.FILTERID STR FILTER01 + FPA.POSANGLE STR INST-PA + FPA.RA STR RA + FPA.DEC STR DEC + FPA.RADECSYS STR RADECSYS + FPA.OBSTYPE STR DATA-TYP + FPA.OBJECT STR OBJECT + FPA.FOCUS STR TELFOCUS + FPA.TIME STR MJD + FPA.TIMESYS STR TIMESYS + FPA.ALT STR ALTITUDE + FPA.AZ STR AZIMUTH + FPA.TEMP STR DET-TMP + FPA.EXPOSURE STR EXPTIME + CHIP.TEMP STR DET-TMP + CELL.EXPOSURE STR EXPTIME + CELL.DARKTIME STR DARKTIME + CELL.READNOISE STR RDNOISE + CELL.TIME STR MJD + CELL.TIMESYS STR TIMESYS + CELL.XBIN STR BIN-FCT1 + CELL.YBIN STR BIN-FCT2 +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA + FPA.TELESCOPE STR Subaru + FPA.INSTRUMENT STR SuprimeCam + FPA.DETECTOR STR kiki + CHIP.XSIZE S32 2048 + CHIP.YSIZE S32 4224 + CELL.XSIZE S32 2048 + CELL.YSIZE S32 4224 + CELL.XWINDOW S32 0 + CELL.YWINDOW S32 0 + CELL.SATURATION S32 60000 + CELL.READDIR S32 1 # Cell is read in x direction + CELL.SATURATION F32 50000.0 + CELL.BAD F32 0 + CELL.XPARITY S32 1 + CELL.YPARITY S32 1 + CELL.Y0 S32 0 + CHIP.X0.DEPEND STR CHIP.NAME +# nausicaa STR XY01:spcam20080721 +# kiki STR XY11:spcam20080721 +# fio STR XY21:spcam20080721 +# sophie STR XY00:spcam20080721 +# sheeta STR XY10:spcam20080721 +# satsuki STR XY20:spcam20080721 +# chihiro STR XY41:spcam20080721 +# clarisse STR XY31:spcam20080721 +# ponyo STR XY40:spcam20080721 +# san STR XY30:spcam20080721 + + CHIP.X0 METADATA + XY01 S32 23 + XY11 S32 2121 + XY21 S32 4221 + XY00 S32 0 + XY10 S32 2095 + XY20 S32 4208 + XY41 S32 8429 + XY31 S32 6337 + XY40 S32 8405 + XY30 S32 6315 + END + CHIP.Y0.DEPEND STR CHIP.NAME + CHIP.Y0 METADATA + XY01 S32 3 + XY11 S32 2 + XY21 S32 0 + XY00 S32 4207 + XY10 S32 4229 + XY20 S32 4254 + XY41 S32 65 + XY31 S32 26 + XY40 S32 4253 + XY30 S32 4252 + END + + CHIP.XPARITY.DEPEND STR CHIP.NAME + CHIP.XPARITY METADATA + XY01 S32 -1 + XY11 S32 -1 + XY21 S32 -1 + XY00 S32 -1 + XY10 S32 -1 + XY20 S32 -1 + XY41 S32 -1 + XY31 S32 -1 + XY40 S32 -1 + XY30 S32 -1 + END + CHIP.YPARITY.DEPEND STR CHIP.NAME + CHIP.YPARITY METADATA + XY01 S32 1 + XY11 S32 1 + XY21 S32 1 + XY00 S32 1 + XY10 S32 1 + XY20 S32 1 + XY41 S32 1 + XY31 S32 1 + XY40 S32 1 + XY30 S32 1 + END +END + + +# How to translation PS concepts into database lookups +DATABASE METADATA + TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS +# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME +# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME + +# A database entry refers to a particular column (COLUMN) in a +# particular table (TABLE), given certain PS concepts (GIVENPS) that +# match certain database columns (GIVENDBCOL). +END + + +# Where there might be some ambiguity, specify the format +FORMATS METADATA + FPA.RA STR HOURS + FPA.DEC STR DEGREES + FPA.TIME STR MJD + CELL.TIME STR MJD +END + Index: /branches/czw_branch/20130702/ippconfig/suprime/ppImage.config =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/ppImage.config (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/ppImage.config (revision 35883) @@ -0,0 +1,193 @@ +### ppImage recipe configuration file for Megacam + +# Overscan subtraction +OVERSCAN.SINGLE BOOL FALSE # Reduce overscan to a single value? +OVERSCAN.FIT STR NONE # NONE | POLYNOMIAL | SPLINE +OVERSCAN.ORDER S32 0 # Order of polynomial fit +OVERSCAN.STAT STR MEAN # MEAN | MEDIAN + +# for a test, turn off selected detrend types +OVERSCAN BOOL FALSE # Overscan subtraction +BIAS BOOL TRUE # Bias subtraction +DARK BOOL FALSE # Dark subtraction +FLAT BOOL TRUE # Flat-field normalisation + +# binned output image options +BIN1.XBIN S32 18 +BIN1.YBIN S32 18 +BIN2.XBIN S32 144 +BIN2.YBIN S32 144 + +# megacam needs fringe subtraction +FRINGE BOOL TRUE # Fringe subtraction + +USE.DEBURNED.IMAGE BOOL FALSE # Skip burntool + +# this table lists extra constraints which should be applied when +# selecting the detrend images. +# note: camera and time are always applied + +DETREND.CONSTRAINTS METADATA + BIAS METADATA + END + DARK METADATA +# EXPTIME STR FPA.EXPOSURE + END + FLAT METADATA + FILTER STR FPA.FILTERID +# DETTYPE STR DOMEFLAT.RAW +# VERSION STR SKYFLAT.RAW +# VERSION STR DOMEFLAT.CORR.XX +# VERSION STR SKYFLAT.CORR + END + FLAT_CORRECTION METADATA + FILTER STR FPA.FILTER + END + FRINGE METADATA + FILTER STR FPA.FILTER +# AIRMASS STR FPA.AIRMASS +# TWILIGHT STR FPA.TWILIGHT + END + SHUTTER METADATA + END + MASK METADATA + END +END + +# only apply the fringe for these filters +FRINGE.FILTERS MULTI +FRINGE.FILTERS STR i +FRINGE.FILTERS STR z + + +# Standard chip processing +CHIP METADATA + BASE.FITS BOOL FALSE # Save base detrended image? + BASE.MASK.FITS BOOL FALSE # Save base detrended image? + BASE.VARIANCE.FITS BOOL FALSE # Save base detrended image? + CHIP.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.VARIANCE.FITS BOOL TRUE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL TRUE # Flat-field normalisation + MASK BOOL FALSE # Mask bad pixels + FRINGE BOOL TRUE # Fringe subtraction + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? + PHOTOM BOOL TRUE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? +END + +# Overscan, bias, dark, shutter +PPIMAGE_OBDS METADATA + BASE.FITS BOOL TRUE # Save base detrended image? + BASE.MASK.FITS BOOL TRUE # Save base detrended image? + BASE.VARIANCE.FITS BOOL TRUE # Save base detrended image? + CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL FALSE # Save chip-mosaic-ed image? + CHIP.VARIANCE.FITS BOOL FALSE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL FALSE # Flat-field normalisation + MASK BOOL FALSE # Mask bad pixels + FRINGE BOOL FALSE # Fringe subtraction + PHOTOM BOOL FALSE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? +END + +# Overscan, bias, dark, shutter, flat-field +PPIMAGE_OBDSF METADATA + BASE.FITS BOOL TRUE # Save base detrended image? + BASE.MASK.FITS BOOL TRUE # Save base detrended image? + BASE.VARIANCE.FITS BOOL TRUE # Save base detrended image? + CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL FALSE # Save chip-mosaic-ed image? + CHIP.VARIANCE.FITS BOOL FALSE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL TRUE # Flat-field normalisation + MASK BOOL FALSE # Mask bad pixels + FRINGE BOOL FALSE # Fringe subtraction + PHOTOM BOOL FALSE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? +END + +# Overscan, bias, dark, shutter, flat-field, fringe +PPIMAGE_OBDSFR METADATA + BASE.FITS BOOL TRUE # Save base detrended image? + BASE.MASK.FITS BOOL TRUE # Save base detrended image? + BASE.VARIANCE.FITS BOOL TRUE # Save base detrended image? + CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL FALSE # Save chip-mosaic-ed image? + CHIP.VARIANCE.FITS BOOL FALSE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL TRUE # Flat-field normalisation + MASK BOOL FALSE # Mask bad pixels + FRINGE BOOL TRUE # Fringe subtraction + PHOTOM BOOL FALSE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? +END + +# Overscan, bias, dark, shutter, flat-field, fringe, photom +PPIMAGE_OBDSFRP METADATA + BASE.FITS BOOL FALSE # Save base detrended image? + BASE.MASK.FITS BOOL FALSE # Save base detrended image? + BASE.VARIANCE.FITS BOOL FALSE # Save base detrended image? + CHIP.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.VARIANCE.FITS BOOL TRUE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL TRUE # Flat-field normalisation + MASK BOOL TRUE # Mask bad pixels + FRINGE BOOL TRUE # Fringe subtraction + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? + PHOTOM BOOL TRUE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? +END + +# Overscan, bias, dark, shutter, flat-field, fringe, photom, astrom +PPIMAGE_OBDSFRA METADATA + BASE.FITS BOOL FALSE # Save base detrended image? + BASE.MASK.FITS BOOL FALSE # Save base detrended image? + BASE.VARIANCE.FITS BOOL FALSE # Save base detrended image? + CHIP.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.VARIANCE.FITS BOOL TRUE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL TRUE # Flat-field normalisation + MASK BOOL TRUE # Mask bad pixels + FRINGE BOOL TRUE # Fringe subtraction + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? + PHOTOM BOOL TRUE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? +END Index: /branches/czw_branch/20130702/ippconfig/suprime/ppMerge.config =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/ppMerge.config (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/ppMerge.config (revision 35883) @@ -0,0 +1,40 @@ + +# Bias combination --- don't want min/max rejection +PPMERGE_BIAS METADATA + REJ F32 3.0 # Rejection threshold (sigma) + ITER S32 2 # Number of rejection iterations + FRACHIGH F32 0.0 # Fraction of high pixels to reject immediately + FRACLOW F32 0.0 # Fraction of low pixels to reject immediately + WEIGHTS BOOL FALSE # Use image weights? + COMBINE STR CLIPPED # Statistic to use for combination: +END + +# Dark combination --- don't want min/max rejection +# More aggressive clipping than bias, so as to remove CRs +PPMERGE_DARK METADATA + REJ F32 2.0 # Rejection threshold (sigma) + ITER S32 4 # Number of rejection iterations + FRACHIGH F32 0.0 # Fraction of high pixels to reject immediately + FRACLOW F32 0.0 # Fraction of low pixels to reject immediately + WEIGHTS BOOL FALSE # Use image weights? + COMBINE STR CLIPPED # Statistic to use for combination: +END + +# Flat combination --- use min/max rejection +PPMERGE_FLAT METADATA + REJ F32 3.0 # Rejection threshold (sigma) + ITER S32 1 # Number of rejection iterations + FRACHIGH F32 0.3 # Fraction of high pixels to reject immediately + FRACLOW F32 0.1 # Fraction of low pixels to reject immediately + NKEEP S32 5 # Minimum number of pixels in stack to keep + WEIGHTS BOOL FALSE # Use image weights? + COMBINE STR MEAN # Statistic to use for combination: +END + + +# Fringe combination --- already included in default, above +PPMERGE_FRINGE METADATA + FRACHIGH F32 0.1 # Fraction of high pixels to reject immediately + WEIGHTS BOOL FALSE # Use image weights? +END + Index: /branches/czw_branch/20130702/ippconfig/suprime/ppStack.config =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/ppStack.config (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/ppStack.config (revision 35883) @@ -0,0 +1,2 @@ + CONVOLVE BOOL FALSE +# we don't need this for megacam Index: /branches/czw_branch/20130702/ippconfig/suprime/psastro.config =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/psastro.config (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/psastro.config (revision 35883) @@ -0,0 +1,177 @@ + +# save matched stars? +PSASTRO.SAVE.REFMATCH BOOL TRUE # save refstar matches as table in output smf file + +# astrometry matching parameters + +# nominal plate scale (microns / pixel) +PSASTRO.PIXEL.SCALE F32 1.0 + +# pmAstromGridAngle +# max grid offset in FP units (microns) +# use plate-scale to make this in pixels? +PSASTRO.GRID.OFFSET F32 2500. +PSASTRO.GRID.SCALE F32 50. + +# extra field for ref stars: +PSASTRO.FIELD.PADDING F32 0.25 + +# pmAstromGridMatch parameters +PSASTRO.GRID.MIN.ANGLE F32 -1.0 # start angle (degrees) +PSASTRO.GRID.MAX.ANGLE F32 +1.0 +PSASTRO.GRID.DEL.ANGLE F32 1.0 + +PSASTRO.GRID.MIN.SCALE F32 0.96 +PSASTRO.GRID.MAX.SCALE F32 1.04 +PSASTRO.GRID.DEL.SCALE F32 0.02 + +# these tweak are in FP units (pixels, currently) +PSASTRO.TWEAK.SCALE F32 1 +PSASTRO.TWEAK.RANGE F32 2 +PSASTRO.TWEAK.SMOOTH F32 2 +PSASTRO.TWEAK.NSIGMA F32 3 + +# single-chip radius match in pixels +PSASTRO.MATCH.FIT.NITER S32 3 +PSASTRO.MATCH.RADIUS F32 12.0 +PSASTRO.MATCH.RADIUS.N0 F32 15.0 +PSASTRO.MATCH.RADIUS.N1 F32 10.0 +PSASTRO.MATCH.RADIUS.N2 F32 5.0 + +PSASTRO.MAX.NRAW S32 1500 # max stars accepted for fitting (0 for all) +PSASTRO.MAX.NREF S32 1500 # max stars accepted for fitting (0 for all) + +PSASTRO.MIN.INST.MAG.RAW F32 -17.0 # min instrumental magnitude for stars accepted for fitting +PSASTRO.MAX.INST.MAG.RAW F32 -11.0 # max instrumental magnitude for stars accepted for fitting +PSASTRO.GRID.MIN.INST.MAG.RAW F32 -17.0 # min instrumental magnitude for stars accepted for grid search +PSASTRO.GRID.MAX.INST.MAG.RAW F32 -10.0 # max instrumental magnitude for stars accepted for grid search +PSASTRO.GRID.MIN.SIGMA F32 4.0 + +PSASTRO.MAX.ERROR F32 10.0 # max error in pixels +PSASTRO.MIN.NSTAR S32 10 # min fitted stars in solution + +PSASTRO.MAX.ALLOWED.FWHM F32 25 + +PSASTRO.MOSAIC.MODE BOOL TRUE + +# for iterations >= N, require a single match per reference +PSASTRO.MOSAIC.CHIP.NITER S32 4 # fit clipping iterations +PSASTRO.MOSAIC.CHIP.NSIGMA F32 3 # fit clipping sigmas +PSASTRO.MOSAIC.UNIQ.ITER S32 2 + +PSASTRO.MOSAIC.MAX.ERROR.N0 F32 0.00 # max allow error for valid solution (arcsec) +PSASTRO.MOSAIC.MAX.ERROR.N1 F32 0.00 # max allow error for valid solution (arcsec) +PSASTRO.MOSAIC.MAX.ERROR.N2 F32 0.00 # max allow error for valid solution (arcsec) +PSASTRO.MOSAIC.MAX.ERROR.N3 F32 0.00 # max allow error for valid solution (arcsec) +PSASTRO.MOSAIC.MAX.ERROR.N4 F32 2.00 # max allow error for valid solution (arcsec) + +PSASTRO.MOSAIC.RADIUS.N0 F32 15.0 +PSASTRO.MOSAIC.RADIUS.N1 F32 8.0 # do not refine the match +PSASTRO.MOSAIC.RADIUS.N2 F32 8.0 # do not refine the match +PSASTRO.MOSAIC.RADIUS.N3 F32 4.0 +PSASTRO.MOSAIC.RADIUS.N4 F32 4.0 + +PSASTRO.MOSAIC.CHIP.ORDER.N0 S32 0 # fit order (-1 means use default) +PSASTRO.MOSAIC.CHIP.ORDER.N1 S32 0 # fit order (-1 means use default) +PSASTRO.MOSAIC.CHIP.ORDER.N2 S32 1 # fit order (-1 means use default) +PSASTRO.MOSAIC.CHIP.ORDER.N3 S32 1 # fit order (-1 means use default) +PSASTRO.MOSAIC.CHIP.ORDER.N4 S32 3 # fit order (-1 means use default) + +PSASTRO.MOSAIC.GRADIENT.NX S32 2 # number of x-dir cells per chip +PSASTRO.MOSAIC.GRADIENT.NY S32 5 # number of y-dir cells per chip + +# use this recipe to set a tight constraint +PSASTRO.FINE METADATA + PSASTRO.MOSAIC.MAX.ERROR.N0 F32 1.50 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N1 F32 1.50 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N2 F32 0.90 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N3 F32 0.90 # max allow error for valid solution (arcsec) + + PSASTRO.MOSAIC.RADIUS.N0 F32 8.0 + PSASTRO.MOSAIC.RADIUS.N1 F32 0.0 + PSASTRO.MOSAIC.RADIUS.N2 F32 4.0 + PSASTRO.MOSAIC.RADIUS.N3 F32 4.0 + + PSASTRO.MOSAIC.CHIP.ORDER.N0 S32 0 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N1 S32 1 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N2 S32 1 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N3 S32 1 # fit order (-1 means use default) +END + +# use this recipe to set a tight constraint +PSASTRO_COARSE METADATA + PSASTRO.GRID.SCALE F32 50.0 + PSASTRO.TWEAK.RANGE F32 1.0 + + DVO.GETSTAR.MIN.MAG F32 10.0 + DVO.GETSTAR.MAX.RHO F32 12000.0 + + PSASTRO.MAX.INST.MAG.RAW F32 -9.0 # max instrumental magnitude for stars accepted for fitting + PSASTRO.GRID.MAX.INST.MAG.RAW F32 -9.0 # max instrumental magnitude for stars accepted for grid search + + PSASTRO.GRID.MIN.SIGMA F32 4.0 + + PSASTRO.MATCH.FIT.NITER S32 4 + PSASTRO.MATCH.RADIUS.N0 F32 60.0 + PSASTRO.MATCH.RADIUS.N1 F32 30.0 + PSASTRO.MATCH.RADIUS.N2 F32 15.0 + PSASTRO.MATCH.RADIUS.N3 F32 8.0 + + PSASTRO.MOSAIC.MAX.ERROR.N0 F32 0.0 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N1 F32 0.0 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N2 F32 0.0 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N3 F32 0.0 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N3 F32 2.0 # max allow error for valid solution (arcsec) + + PSASTRO.MOSAIC.RADIUS.N0 F32 60.0 + PSASTRO.MOSAIC.RADIUS.N1 F32 30.0 + PSASTRO.MOSAIC.RADIUS.N2 F32 15.0 + PSASTRO.MOSAIC.RADIUS.N3 F32 8.0 + PSASTRO.MOSAIC.RADIUS.N4 F32 4.0 + + PSASTRO.MOSAIC.CHIP.ORDER.N0 S32 0 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N1 S32 1 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N2 S32 1 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N3 S32 1 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N4 S32 1 # fit order (-1 means use default) +END + +PSASTRO.CATDIR STR SYNTH.GRIZY +DVO.GETSTAR.MAX.RHO F32 3000.0 +DVO.GETSTAR.MIN.MAG F32 12.0 +DVO.GETSTAR.MIN.MAG.INST F32 -15.0 + +# we match the FILTER.ID (corresponding to the FILTER, see camera.config) to the dvo db PHOTCODE +PHOTCODE.DATA MULTI +PHOTCODE.DATA METADATA + FILTER STR u + ZEROPT F32 23.6 + PHOTCODE STR g +END +PHOTCODE.DATA METADATA + FILTER STR g + ZEROPT F32 26.46 + PHOTCODE STR g +END +PHOTCODE.DATA METADATA + FILTER STR r + ZEROPT F32 25.98 + PHOTCODE STR r +END +PHOTCODE.DATA METADATA + FILTER STR i + ZEROPT F32 25.74 + PHOTCODE STR i +END +PHOTCODE.DATA METADATA + FILTER STR z + ZEROPT F32 24.80 + PHOTCODE STR z +END + +# plotting options +PSASTRO.PLOT.INST.MAG.MAX F32 -9.0 +PSASTRO.PLOT.INST.MAG.MIN F32 -17.0 +PSASTRO.PLOT.REF.MAG.MIN F32 +10.0 +PSASTRO.PLOT.REF.MAG.MAX F32 +25.0 + Index: /branches/czw_branch/20130702/ippconfig/suprime/psphot.config =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/psphot.config (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/psphot.config (revision 35883) @@ -0,0 +1,30 @@ + +# turn these on to see specific outputs +SAVE.PLOTS BOOL FALSE + +# PSF model parameters : choose the PSF model desired +# PSF_MODEL STR PS_MODEL_QGAUSS +PSF_MODEL STR PS_MODEL_PS1_V1 +# PSF_MODEL STR PS_MODEL_RGAUSS + +PSF.TREND.MODE STR MAP +PSF.TREND.NX S32 1 +PSF.TREND.NY S32 1 +PSF_SN_LIM F32 5 # minimum S/N for stars used for PSF model + +PEAKS_SMOOTH_SIGMA F32 2.5 # smoothing kernel sigma in pixels +PEAKS_NSIGMA_LIMIT F32 5.0 # peak significance threshold +MOMENTS_SCALE F32 0.1 # PSFs are generally small, avoid the CRs + +PSF_FIT_RADIUS_SCALE F32 10.0 # fitting radius for test PSF model + +PSPHOT.CRMASK.APPLY BOOL TRUE # TEST THIS before enabling. + +MOMENTS_SX_MIN F32 1.0 +MOMENTS_SY_MIN F32 1.0 + +BACKGROUND.XBIN S32 400 # size of background superpixels +BACKGROUND.YBIN S32 400 # size of background superpixels +BACKGROUND.XSAMPLE F32 2.0 # size of background superpixels +BACKGROUND.YSAMPLE F32 2.0 # size of background superpixels +IMSTATS_NPIX S32 40000 # number of pixels to use for sky estimate boxes: Index: /branches/czw_branch/20130702/ippconfig/suprime/pswarp.config =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/pswarp.config (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/pswarp.config (revision 35883) @@ -0,0 +1,3 @@ +### Megacam recipe for pswarp + +ASTROM.SOURCE STR PSASTRO.OUTPUT # Source file rule for astrometry, or NULL Index: /branches/czw_branch/20130702/ippconfig/suprime/rejections.config =================================================================== --- /branches/czw_branch/20130702/ippconfig/suprime/rejections.config (revision 35883) +++ /branches/czw_branch/20130702/ippconfig/suprime/rejections.config (revision 35883) @@ -0,0 +1,38 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 2.0 + IMFILE.STDEV F32 10.0 + IMFILE.MEANSTDEV F32 0.5 + IMFILE.SKEWNESS F32 0.0 + IMFILE.KURTOSIS F32 0.0 + IMFILE.SNR F32 0.0 + IMFILE.BIN.STDEV F32 0.5 + IMFILE.BIN.SNR F32 0.0 + IMFILE.FLUX F32 0.0 + EXP.MEAN F32 1.0 + EXP.STDEV F32 10.0 + EXP.MEANSTDEV F32 0.5 + EXP.SNR F32 0.0 + EXP.BIN.STDEV F32 0.0 + EXP.BIN.SNR F32 0.0 + EXP.FLUX F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 3.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SNR is the minimum permitted signal-to-noise for an imfile +# EXP.SNR is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /branches/czw_branch/20130702/ippconfig/system.config =================================================================== --- /branches/czw_branch/20130702/ippconfig/system.config (revision 35882) +++ /branches/czw_branch/20130702/ippconfig/system.config (revision 35883) @@ -19,4 +19,5 @@ VYSOS20 STR vysos20/camera.config # VYSOS 5in SSP STR ssp/camera.config # Pan-STARRS spectroscopic sky probe + SUPRIMECAM STR suprime/camera.config # Subaru Suprimecam SIMMOSAIC STR simmosaic/camera.config # Simulated mosaic, for testing SIMTEST STR simtest/camera.config # Simulation test camera