Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/Makefile.am =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/Makefile.am (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/Makefile.am (revision 37065) @@ -20,5 +20,6 @@ lulin \ ssp \ - uh8k + uh8k \ + suprime install_files = \ Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/configure.ac =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/configure.ac (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/configure.ac (revision 37065) @@ -32,4 +32,5 @@ ssp/Makefile uh8k/Makefile + suprime/Makefile ]) AC_OUTPUT Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/dvo.photcodes =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/dvo.photcodes (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/dvo.photcodes (revision 37065) @@ -903,4 +903,10 @@ 11400 GPC1.y.SkyChip dep 25.000 0.000 0.000 - - 0.0000 0 5 0.000 0.000 0.000 0.000 0x0000 0x0000 0x0000 0x0000 11500 GPC1.w.SkyChip dep 25.000 0.000 0.000 - - 0.0000 0 9 0.000 0.000 0.000 0.000 0x0000 0x0000 0x0000 0x0000 + 12000 GPC1.g.ForcedWarp dep 25.000 0.000 0.000 - - 0.0000 0 1 0.000 0.000 0.000 0.000 0x0000 0x0000 0x0000 0x0000 + 12100 GPC1.r.ForcedWarp dep 25.000 0.000 0.000 - - 0.0000 0 2 0.000 0.000 0.000 0.000 0x0000 0x0000 0x0000 0x0000 + 12200 GPC1.i.ForcedWarp dep 25.000 0.000 0.000 - - 0.0000 0 3 0.000 0.000 0.000 0.000 0x0000 0x0000 0x0000 0x0000 + 12300 GPC1.z.ForcedWarp dep 25.000 0.000 0.000 - - 0.0000 0 4 0.000 0.000 0.000 0.000 0x0000 0x0000 0x0000 0x0000 + 12400 GPC1.y.ForcedWarp dep 25.000 0.000 0.000 - - 0.0000 0 5 0.000 0.000 0.000 0.000 0x0000 0x0000 0x0000 0x0000 + 12500 GPC1.w.ForcedWarp dep 25.000 0.000 0.000 - - 0.0000 0 9 0.000 0.000 0.000 0.000 0x0000 0x0000 0x0000 0x0000 160 MOSAIC2.B.00 dep 25.107 0.000 0.000 - - 0.0000 0 1 0.000 0.000 1.000 0.000 0x0000 0x3888 0x0000 0x0000 161 MOSAIC2.B.01 dep 25.120 0.000 0.000 - - 0.0000 0 1 0.000 0.000 1.000 0.000 0x0000 0x3888 0x0000 0x0000 Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/camera.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/camera.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/camera.config (revision 37065) @@ -139,4 +139,5 @@ CMF.XRAD STR {CHIP.NAME}.xrad # use .PSF and .EXT? CMF.XFIT STR {CHIP.NAME}.xfit # use .PSF and .EXT? + CMF.XGAL STR {CHIP.NAME}.xgal # use .PSF and .EXT? CMF.DETEFF STR {CHIP.NAME}.deteff Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/dvo.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/dvo.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/dvo.config (revision 37065) @@ -71,2 +71,3 @@ POS_TOOFEW 1 RELASTRO_SIGMA_LIM 0.01 # select measurements with dM < SIGMA_LIM for relphot analysis +PAR_FACTOR_MIN 0.2 Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/format_orig.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/format_orig.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/format_orig.config (revision 37065) @@ -8,4 +8,5 @@ CONTROLR STR STARGRASP NAMPS S32 64 + MJD-OBS F64 54734.0 # OP: < END Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/ppImage.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/ppImage.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/ppImage.config (revision 37065) @@ -26,4 +26,9 @@ APPLY.BURNTOOL BOOL TRUE # apply burntool correction in ppImage + +PATTERN.CELL.SUBSET METADATA # Menu of chips and/or cells for cell pattern correction +# XXX TEST ONLY (I was trying to median-subtract each cell using PATTERN.CELL to generate laser flat samples) +# XY40 STR 0111111111111111111111111111111111111111111111111111111111111111 +END # Final detrending options Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/ppStack.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/ppStack.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/ppStack.config (revision 37065) @@ -79,4 +79,21 @@ MATCH.REJ F32 4.0 SAFE BOOL F + +END + +STACK_CNP METADATA ## Based on STACK_THREEPI and STACK_MD_DEEP_1DG + OUTPUT.NOCOMP BOOL FALSE + OUTPUT.LOGFLUX BOOL TRUE + STACK.TYPE STR DEEP_STACK + PSF.INPUT.CLIP.SIMPLE BOOL True + PSF.INPUT.MAX F32 10.0 # + PSF.INPUT.CLIP.NSIGMA F32 100.0 + PSF.INPUT.THRESH F32 NAN + PSF.INPUT.ASYMMETRY F32 NAN + + MATCH.REJ F32 4.0 + SAFE BOOL F + + PSF.TARGET.AS.MAX.EPSILON F32 0.1 END @@ -143,5 +160,5 @@ STACK.TYPE STR DEEP_STACK ## needed? PSF.INPUT.CLIP.SIMPLE BOOL True - PSF.INPUT.MAX F32 6.0 # never really want >6 pixels in refstack, even on edges + PSF.INPUT.MAX F32 7.0 # center/edge can vary 1-2 pix, prefer <6 pix but needs to be <7 pix for edges PSF.INPUT.CLIP.NSIGMA F32 1.0 # sample typically on rising side of distribution (set even smaller?) PSF.INPUT.THRESH F32 NAN @@ -151,4 +168,14 @@ PSF.TARGET.AS.MAX BOOL TRUE # Set the target PSF FWHM as the maximum of accepted input FWHM values. PSF.TARGET.AS.MAX.EPSILON F32 0.1 # Amount to set the target PSF FWHM larger than the maximum input. Target = eps + max(input) + THRESHOLD.MASK F32 0.1 # Threshold for mask deconvolution (0..1) + COMBINE.ITER F32 0.5 # Number of rejection iterations per input + COMBINE.REJ F32 3.0 # Rejection threshold in combination (sigma) + COMBINE.SYS F32 0.1 # Relative systematic error in combination + COMBINE.DISCARD F32 0.2 # Discard fraction for Olympic weighted mean + IMAGE.REJ F32 0.1 # Rejected pixel fraction threshold for rejecting entire image + NMINPIX S32 4 # Minimum input per pixel + MASK.VAL STR SUSPECT,MASK.VALUE,CONV.BAD,GHOST # Mask value of input bad pixels + MASK.BLANKBORDER S32 20 # Mask blank border in final stack output + BSCALEOFFSET BOOL TRUE # HACK for removing bscale offset from input warps because of compression (0.5*BSCALE) END @@ -167,4 +194,14 @@ PSF.TARGET.AS.MAX BOOL TRUE PSF.TARGET.AS.MAX.EPSILON F32 0.1 + THRESHOLD.MASK F32 0.1 # Threshold for mask deconvolution (0..1) + COMBINE.ITER F32 0.5 # Number of rejection iterations per input + COMBINE.REJ F32 3.0 # Rejection threshold in combination (sigma) + COMBINE.SYS F32 0.1 # Relative systematic error in combination + COMBINE.DISCARD F32 0.2 # Discard fraction for Olympic weighted mean + IMAGE.REJ F32 0.1 # Rejected pixel fraction threshold for rejecting entire image + NMINPIX S32 30 # Minimum input per pixel + MASK.VAL STR SUSPECT,MASK.VALUE,CONV.BAD,GHOST # Mask value of input bad pixels + MASK.BLANKBORDER S32 20 # Mask blank border in final stack output + BSCALEOFFSET BOOL TRUE # HACK for removing bscale offset from input warps because of compression (0.5*BSCALE) END @@ -183,4 +220,32 @@ PSF.TARGET.AS.MAX BOOL TRUE PSF.TARGET.AS.MAX.EPSILON F32 0.1 + THRESHOLD.MASK F32 0.5 # Threshold for mask deconvolution (0..1) + COMBINE.ITER F32 0.5 # Number of rejection iterations per input + COMBINE.REJ F32 3.5 # Rejection threshold in combination (sigma) + COMBINE.SYS F32 0.1 # Relative systematic error in combination + COMBINE.DISCARD F32 0.2 # Discard fraction for Olympic weighted mean + IMAGE.REJ F32 0.1 # Rejected pixel fraction threshold for rejecting entire image +END + +STACK_MDTHREEPI_DEEP_1DG METADATA ## revised config for MD+3PI + OUTPUT.NOCOMP BOOL TRUE + OUTPUT.LOGFLUX BOOL FALSE + OUTPUT.REPLICATE BOOL TRUE + STACK.TYPE STR DEEP_STACK + PSF.INPUT.CLIP.SIMPLE BOOL True + PSF.INPUT.MAX F32 10.0 # + PSF.INPUT.CLIP.NSIGMA F32 100.0 + PSF.INPUT.THRESH F32 NAN + PSF.INPUT.ASYMMETRY F32 NAN + MATCH.REJ F32 4.0 # need ot tune? + SAFE BOOL FALSE + PSF.TARGET.AS.MAX BOOL TRUE + PSF.TARGET.AS.MAX.EPSILON F32 0.1 + THRESHOLD.MASK F32 0.01 # Threshold for mask deconvolution (0..1) + COMBINE.ITER F32 0.5 # Number of rejection iterations per input + COMBINE.REJ F32 2.5 # Rejection threshold in combination (sigma) + COMBINE.SYS F32 0.1 # Relative systematic error in combination + COMBINE.DISCARD F32 0.2 # Discard fraction for Olympic weighted mean + IMAGE.REJ F32 0.1 # Rejected pixel fraction threshold for rejecting entire image END Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/psastro.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/psastro.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/psastro.config (revision 37065) @@ -66,4 +66,8 @@ PSASTRO.USE.MODEL BOOL TRUE +# apply Koppenhoefer Correction to this camera? +KH.CORRECT.APPLY BOOL TRUE +KH.CORRECT.ENDDATE STR 2011/05/11,00:00:00 + # PSASTRO.FIX.CHIPS BOOL TRUE PSASTRO.PIXEL.TOLERANCE F32 3.0 @@ -83,5 +87,5 @@ PSASTRO.MOSAIC.MAX.ERROR.N3 F32 0.00 # max allow error for valid solution (arcsec) PSASTRO.MOSAIC.MAX.ERROR.N4 F32 0.00 # max allow error for valid solution (arcsec) -PSASTRO.MOSAIC.MAX.ERROR.N5 F32 5.00 # max allow error for valid solution (arcsec) +PSASTRO.MOSAIC.MAX.ERROR.N5 F32 0.30 # max allow error for valid solution (arcsec) # mosaic radius match in pixels (do these make sense?) @@ -118,6 +122,7 @@ # PSASTRO.CATDIR STR SYNTH.GRIZY # PSASTRO.CATDIR STR PS1.REF.20120503 -PSASTRO.CATDIR STR PS1.REF.20120524 - +# PSASTRO.CATDIR STR PS1.REF.20120524 +# PSASTRO.CATDIR STR PS1.REF.20140605 +PSASTRO.CATDIR STR PS1.REF.20140713 DVO.GETSTAR.PHOTCODE STR i @@ -358,6 +363,7 @@ DEFAULT_RECIPE METADATA -# PSASTRO.CATDIR STR PS1.REF.20120503 - PSASTRO.CATDIR STR PS1.REF.20120524 +# PSASTRO.CATDIR STR PS1.REF.20120503 +# PSASTRO.CATDIR STR PS1.REF.20120524 + PSASTRO.CATDIR STR PS1.REF.20140605 ZERO.POINT.USE.MEAN BOOL TRUE END @@ -370,7 +376,8 @@ LAP_ASTRO METADATA # PSASTRO.CATDIR STR 3PI.20110505.REFCAT -# PSASTRO.CATDIR STR SYNTH.GRIZY -# PSASTRO.CATDIR STR PS1.REF.20120503 - PSASTRO.CATDIR STR PS1.REF.20120524 +# PSASTRO.CATDIR STR SYNTH.GRIZY +# PSASTRO.CATDIR STR PS1.REF.20120503 +# PSASTRO.CATDIR STR PS1.REF.20120524 + PSASTRO.CATDIR STR PS1.REF.20140605 ZERO.POINT.USE.MEAN BOOL TRUE END @@ -401,5 +408,6 @@ DVO.GETSTAR.FIXED.ZEROPT F32 25.0 - PSASTRO.CATDIR STR PS1.REF.20120524 + PSASTRO.CATDIR STR PS1.REF.20140605 +# PSASTRO.CATDIR STR PS1.REF.20120524 ZERO.POINT.USE.MEAN BOOL TRUE PSASTRO.MAX.NRAW S32 0 @@ -420,5 +428,6 @@ DVO.GETSTAR.FIXED.ZEROPT F32 25.0 DVO.GETSTAR.MIN.MAG.INST F32 -15.0 - PSASTRO.CATDIR STR PS1.REF.20120524 +# PSASTRO.CATDIR STR PS1.REF.20120524 + PSASTRO.CATDIR STR PS1.REF.20140605 ZERO.POINT.USE.MEAN BOOL TRUE @@ -439,5 +448,6 @@ # - similar to DEEPCAL except for MIN.NSTAR 5 to attemp more edge skycells if poorer STATICSKY_NIGHTCAL METADATA - PSASTRO.CATDIR STR PS1.REF.20120524 # reset here to ensure same catalog is used when reprocessing set uniformly +# PSASTRO.CATDIR STR PS1.REF.20120524 # reset here to ensure same catalog is used when reprocessing set uniformly + PSASTRO.CATDIR STR PS1.REF.20140605 REFSTAR_MASK BOOL FALSE PSASTRO.SAVE.REFMATCH BOOL FALSE @@ -475,5 +485,6 @@ # revised setup for DEEP/MDS stacks with range of inputs, should work for N~2(edges)--500 inputs with large MIN/MAX.INST.MAG.RAW STATICSKY_DEEPCAL METADATA - PSASTRO.CATDIR STR PS1.REF.20120524 # reset here to ensure same catalog is used when reprocessing set uniformly + #PSASTRO.CATDIR STR PS1.REF.20120524 # reset here to ensure same catalog is used when reprocessing set uniformly + PSASTRO.CATDIR STR PS1.REF.20140605 # ensure same catalog is used when reprocessing MD set uniformly REFSTAR_MASK BOOL FALSE PSASTRO.SAVE.REFMATCH BOOL FALSE @@ -483,6 +494,6 @@ ZERO.POINT.USE.MEAN BOOL TRUE PSASTRO.FIELD.PADDING F32 0.01 # skycells are well defined, don't need large padding. 1% of 6400 is 64 pixels - PSASTRO.MAX.NRAW S32 1000 # include more than MAX.NREF to account for extras like false-positives - PSASTRO.MAX.NREF S32 500 # if edge skycell ~10% then try ~50 to match + PSASTRO.MAX.NRAW S32 1500 # include more than MAX.NREF to account for extras like false-positives + PSASTRO.MAX.NREF S32 1000 # if edge skycell ~10% then try ~50 to match. increase to help odd bulk offsets PSASTRO.MIN.INST.MAG.RAW F32 -25.0 # PSASTRO.MAX.INST.MAG.RAW F32 -5.0 @@ -494,6 +505,6 @@ DVO.GETSTAR.MAX.RHO F32 6000.0 # N/sqdeg, slightly larger than MAX.NREF DVO.GETSTAR.MIN.MAG.INST F32 -25.0 # set absurd range to cover large range of exptime, then clamp... - DVO.GETSTAR.MIN.MAG F32 15.0 # only used if keyword problem so also using CLAMP_MAG_MIN - REFSTAR_CLAMP_MAG_MIN F32 15.0 # saturation in MD ~14 even in y-band, so toss out brighter in the list + DVO.GETSTAR.MIN.MAG F32 16.5 # only used if keyword problem so also using CLAMP_MAG_MIN + REFSTAR_CLAMP_MAG_MIN F32 16.5 # saturation in MD ~14 even in y-band, so toss out brighter in the list. seeing offset in brighter stars DVO.GETSTAR.FIXED.ZEROPT F32 0.0 # not really needed, exptime overly dominates Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/psphot.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/psphot.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/gpc1/psphot.config (revision 37065) @@ -28,11 +28,13 @@ PSPHOT.CR.AUTOSCALE BOOL FALSE -PSF.TREND.NX S32 3 -PSF.TREND.NY S32 3 +PSF.TREND.NX S32 6 +PSF.TREND.NY S32 6 + +PSF_MAX_NSTARS S32 2000 # limit number of stars used for PSF model # rename NONLINEAR_FIT_SN_LIM? FULL_FIT_SN_LIM F32 25.0 -APTREND.ORDER.MAX S32 3 +APTREND.ORDER.MAX S32 6 PSPHOT.CRMASK.APPLY BOOL TRUE # TEST THIS before enabling. @@ -53,4 +55,14 @@ PSPHOT.EXT.DIFF.ALTERNATE BOOL TRUE PSPHOT.EXT.DIFF.ALTERNATE.THRESH F32 1.25 + + # XXX enable these when MOPS is ready + # LMM_FIT_CHISQ_CONVERGENCE BOOL FALSE + # LMM_FIT_GAIN_FACTOR_MODE S32 2 + # PSF_FIT_MIN_TOL F32 0.2 + # EXT_FIT_MIN_TOL F32 0.2 + # PSF_FIT_ITER S32 20 + # EXT_FIT_ITER S32 20 + # FOOTPRINT_CULL_NSIGMA_DELTA F32 10 + # FOOTPRINT_CULL_NSIGMA_MIN F32 2 PSPHOT.EXT.FIT.ALL.SOURCES BOOL TRUE Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/filerules-mef.mdc =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/filerules-mef.mdc (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/filerules-mef.mdc (revision 37065) @@ -86,4 +86,5 @@ PSPHOT.PSF.LOAD INPUT @FILES CHIP PSF PSPHOT.INPUT.CMF INPUT @FILES CHIP CMF +PSPHOT.INPUT.CFF INPUT @FILES CHIP CFF PSPHOT.INPUT.TEXT INPUT @FILES CHIP SRCTEXT PSPHOT.EXPNUM INPUT @FILES CHIP MASK @@ -110,4 +111,5 @@ PSASTRO.WCS INPUT @FILES CHIP CMF PSASTRO.MODEL INPUT @DETDB FPA ASTROM +PSASTRO.KH.CORRECT INPUT @DETDB FPA KH.CORRECT PSASTRO.EXTRACT.ASTROM INPUT @FILES CHIP CMF @@ -181,4 +183,5 @@ PPBACKGROUND.PATTERN INPUT @FILES CHIP PATTERN PPBACKGROUND.BACKGROUND INPUT @FILES CHIP IMAGE +PPBACKGROUND.STACK INPUT @FILES FPA IMAGE ### output file definitions @@ -247,4 +250,5 @@ PSPHOT.OUT.CMF.SPL OUTPUT {OUTPUT}.{CHIP.NAME}.cmf CMF NONE CHIP TRUE SPLIT PSPHOT.OUT.CMF.MEF OUTPUT {OUTPUT}.cmf CMF NONE CHIP TRUE MEF +PSPHOT.OUTPUT.CFF OUTPUT {OUTPUT}.cff CFF NONE CHIP TRUE MEF PSPHOT.PSF.RAW.SAVE OUTPUT {OUTPUT}.psf PSF NONE CHIP TRUE MEF PSPHOT.PSF.SKY.SAVE OUTPUT {OUTPUT}.psf PSF NONE CHIP TRUE MEF @@ -390,4 +394,7 @@ TRACE.EXP.UPDATE OUTPUT {OUTPUT}.trace.update TEXT NONE FPA TRUE NONE +DBINFO.IMFILE OUTPUT {OUTPUT}.{CHIP.NAME}.dbinfo TEXT NONE CHIP TRUE NONE +DBINFO.EXP OUTPUT {OUTPUT}.dbinfo TEXT NONE CHIP TRUE NONE + PPNOISEMAP.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fits IMAGE NONE CHIP TRUE NONE @@ -409,2 +416,6 @@ PPBACKGROUND.CONFIG OUTPUT {OUTPUT}.{CHIP.NAME}.ppBackground.mdc TEXT NONE CHIP TRUE NONE PPBACKGROUND.STATS OUTPUT {OUTPUT}.{CHIP.NAME}.stats STATS NONE CHIP TRUE NONE + +PPBACKGROUND.STACK.OUTPUT OUTPUT {OUTPUT}.bkgrest.fits IMAGE COMP_IMG FPA TRUE NONE +PPBACKGROUND.STACK.MODEL OUTPUT {OUTPUT}.bkgmdl.fits IMAGE COMP_IMG FPA TRUE NONE +PPBACKGROUND.OTA.SOLUTION OUTPUT {OUTPUT}.{CHIP.NAME}.OTAS.fits IMAGE COMP_IMG CHIP TRUE NONE Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/filerules-simple.mdc =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/filerules-simple.mdc (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/filerules-simple.mdc (revision 37065) @@ -57,4 +57,5 @@ PSPHOT.PSF.LOAD INPUT @FILES CHIP PSF PSPHOT.INPUT.CMF INPUT @FILES CHIP CMF +PSPHOT.INPUT.CFF INPUT @FILES CHIP CFF PSPHOT.INPUT.TEXT INPUT @FILES CHIP SRCTEXT PSPHOT.EXPNUM INPUT @FILES CHIP MASK @@ -80,4 +81,5 @@ PSASTRO.WCS INPUT @FILES CHIP CMF PSASTRO.MODEL INPUT @DETDB FPA ASTROM +PSASTRO.KH.CORRECT INPUT @DETDB FPA KH.CORRECT PSASTRO.EXTRACT.ASTROM INPUT @FILES CHIP CMF @@ -153,4 +155,5 @@ PPBACKGROUND.PATTERN INPUT @FILES CHIP PATTERN PPBACKGROUND.BACKGROUND INPUT @FILES CHIP IMAGE +PPBACKGROUND.STACK INPUT @FILES FPA IMAGE ### output file definitions @@ -209,4 +212,5 @@ PSPHOT.OUTPUT.CMF OUTPUT {OUTPUT}.cmf CMF NONE CHIP TRUE NONE PSPHOT.OUT.CMF.MEF OUTPUT {OUTPUT}.cmf CMF NONE CHIP TRUE NONE +PSPHOT.OUTPUT.CFF OUTPUT {OUTPUT}.cff CFF NONE CHIP TRUE NONE PSPHOT.PSF.RAW.SAVE OUTPUT {OUTPUT}.psf PSF NONE FPA TRUE NONE PSPHOT.PSF.SKY.SAVE OUTPUT {OUTPUT}.psf PSF NONE FPA TRUE NONE @@ -347,4 +351,7 @@ TRACE.EXP.UPDATE OUTPUT {OUTPUT}.exp.trace.update TEXT NONE FPA TRUE NONE +DBINFO.IMFILE OUTPUT {OUTPUT}.{CHIP.NAME}.dbinfo TEXT NONE CHIP TRUE NONE +DBINFO.EXP OUTPUT {OUTPUT}.dbinfo TEXT NONE CHIP TRUE NONE + PPNOISEMAP.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fits IMAGE NONE CHIP TRUE NONE @@ -366,2 +373,6 @@ PPBACKGROUND.CONFIG OUTPUT {OUTPUT}.{CHIP.NAME}.ppBackground.mdc TEXT NONE CHIP TRUE NONE PPBACKGROUND.STATS OUTPUT {OUTPUT}.{CHIP.NAME}.stats STATS NONE CHIP TRUE NONE + +PPBACKGROUND.STACK.OUTPUT OUTPUT {OUTPUT}.bkgrest.fits IMAGE COMP_IMG FPA TRUE NONE +PPBACKGROUND.STACK.MODEL OUTPUT {OUTPUT}.bkgmdl.fits IMAGE COMP_IMG FPA TRUE NONE +PPBACKGROUND.OTA.SOLUTION OUTPUT {OUTPUT}.{CHIP.NAME}.OTAS.fits IMAGE COMP_IMG CHIP TRUE NONE Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/filerules-split.mdc =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/filerules-split.mdc (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/filerules-split.mdc (revision 37065) @@ -101,4 +101,5 @@ PSASTRO.WCS INPUT @FILES CHIP WCS PSASTRO.MODEL INPUT @DETDB FPA ASTROM +PSASTRO.KH.CORRECT INPUT @DETDB FPA KH.CORRECT PSASTRO.EXTRACT.ASTROM INPUT @FILES CHIP CMF @@ -177,4 +178,5 @@ PPBACKGROUND.PATTERN INPUT @FILES CHIP PATTERN PPBACKGROUND.BACKGROUND INPUT @FILES CHIP IMAGE +PPBACKGROUND.STACK INPUT @FILES FPA IMAGE ### output file definitions @@ -399,4 +401,7 @@ TRACE.EXP.UPDATE OUTPUT {OUTPUT}.trace.update TEXT NONE FPA TRUE NONE +DBINFO.IMFILE OUTPUT {OUTPUT}.{CHIP.NAME}.dbinfo TEXT NONE CHIP TRUE NONE +DBINFO.EXP OUTPUT {OUTPUT}.dbinfo TEXT NONE CHIP TRUE NONE + PPNOISEMAP.OUTPUT OUTPUT {OUTPUT}.{CHIP.NAME}.fits IMAGE NONE CHIP TRUE NONE @@ -430,4 +435,8 @@ PPBACKGROUND.CONFIG OUTPUT {OUTPUT}.{CHIP.NAME}.ppBackground.mdc TEXT NONE CHIP TRUE NONE PPBACKGROUND.STATS OUTPUT {OUTPUT}.{CHIP.NAME}.stats STATS NONE CHIP TRUE NONE + +PPBACKGROUND.STACK.OUTPUT OUTPUT {OUTPUT}.bkgrest.fits IMAGE COMP_IMG FPA TRUE NONE +PPBACKGROUND.STACK.MODEL OUTPUT {OUTPUT}.bkgmdl.fits IMAGE COMP_IMG FPA TRUE NONE +PPBACKGROUND.OTA.SOLUTION OUTPUT {OUTPUT}.{CHIP.NAME}.OTAS.fits IMAGE COMP_IMG CHIP TRUE NONE Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/ppSim.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/ppSim.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/ppSim.config (revision 37065) @@ -61,4 +61,5 @@ PSF.THETA F32 0.0 PSF.CONVOLVE BOOL FALSE # generate fake stars with PSF (F), or smooth with PSF (T)? +CONVOLVE.NSIGMA F32 5.0 # smooth image out to NSIGMA * sigma STARS.GRID BOOL FALSE # Add grid of fake stars with constant flux Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/ppStack.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/ppStack.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/ppStack.config (revision 37065) @@ -13,4 +13,5 @@ MASK.BAD STR BLANK # Mask value to give bad pixels MASK.POOR STR CONV.POOR # Mask value to give poor pixels +MASK.BLANKBORDER S32 0 # Mask blank border in final stack output (may want to set KERNEL.SIZE) # we are in some danger of inconsistency in the definition of a 'bad' vs a 'suspect' pixel @@ -32,4 +33,6 @@ TARGET.FRAC F32 0.1 # Minimum flux fraction for target PSF TARGET.MINMAG F32 3.0 # Minimum magnitude difference to tolerate in stamp +NMINPIX S32 1 # Minimum input per pixel +BSCALEOFFSET BOOL FALSE # HACK for removing offset from input warps because of compression (0.5*BSCALE) BACKGROUND.MODEL BOOL FALSE # Construct a stacked version of the warp stage background @@ -166,4 +169,6 @@ STACK_THREEPI_ALT METADATA END +STACK_CNP METADATA +END STACK_MD_REF METADATA @@ -187,4 +192,7 @@ STACK_NIGHTLY_1DG METADATA STACK.TYPE STR NIGHTLY_STACK +END + +STACK_MDTHREEPI_DEEP_1DG METADATA END Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/ppStats.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/ppStats.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/ppStats.config (revision 37065) @@ -116,4 +116,5 @@ HEADER STR DT_ASTR # elapsed time in astrometry processing HEADER STR NASTRO + HEADER STR ASTROM_CHIPS HEADER STR ZPT_OBS Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/ppStatsFromMetadata.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/ppStatsFromMetadata.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/ppStatsFromMetadata.config (revision 37065) @@ -274,4 +274,5 @@ ENTRY VAL DT_ASTR F32 SUM -dtime_astrom ENTRY VAL NASTRO S32 SUM -n_astrom + ENTRY VAL ASTROM_CHIPS U64 BITWISEOR -astrom_chips ENTRY VAL ZPT_OBS F32 SAMPLE_MEAN -zpt_obs Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/psastro.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/psastro.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/psastro.config (revision 37065) @@ -3,4 +3,5 @@ PSASTRO.ONLY.REFSTARS BOOL FALSE # skip all but refstar matches PSASTRO.SAVE.REFMATCH BOOL FALSE # save refstar matches as table in output smf file +PSASTRO.SAVE.CFF BOOL FALSE # save a cff file (input for psphotFullForce) # select which WCS style to use on output images. @@ -229,4 +230,8 @@ PSASTRO.USE.MODEL BOOL FALSE +# apply Koppenhoefer Correction to this camera? +KH.CORRECT.APPLY BOOL FALSE +KH.CORRECT.ENDDATE STR NONE + PSASTRO.PIXEL.TOLERANCE F32 3.0 PSASTRO.ANGLE.TOLERANCE F32 1.0 @@ -279,4 +284,5 @@ STATICSKY_CAL METADATA + PSASTRO.SAVE.CFF BOOL TRUE # save a cff file (input for psphotFullForce) END Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/psphot.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/psphot.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/psphot.config (revision 37065) @@ -1,3 +1,2 @@ - # these options turn on different inputs and/or outputs SAVE.OUTPUT BOOL TRUE @@ -16,5 +15,5 @@ # format for output CMF files -OUTPUT.FORMAT STR PS1_V3 +OUTPUT.FORMAT STR PS1_V5 # the zero point is used to set a basic scale for DVO @@ -41,5 +40,5 @@ # allowed values for SKY_STAT: -# SAMPLE_MEAN, SAMPLE_MEDIAN, CLIPPED_MEAN, ROBUST_MEAN, ROBUST_QUARTILE, FITTED_MEAN +# SAMPLE_MEAN, SAMPLE_MEDIAN, CLIPPED_MEAN, ROBUST_MEDIAN, ROBUST_QUARTILE, FITTED_MEAN # masking parameters (XXX EAM : rework this to use psRegion like ANALYSIS_REGION) @@ -181,4 +180,5 @@ EXT_FIT_MIN_TOL F32 0.01 # Fit tolerance for EXT EXT_FIT_MAX_TOL F32 2.00 # Fit tolerance for EXT +EXT_FIT_NSIGMA_CONV F32 9.00 # Number of sigma for PSF convolved fits # the following is used to require a minimum quality of fit before @@ -189,12 +189,39 @@ # extended source aperture-like measurements -EXTENDED_SOURCE_ANALYSIS BOOL FALSE # perform any of the aperture-like measurements? +EXTENDED_SOURCE_PETROSIAN BOOL FALSE +EXTENDED_SOURCE_ANNULI BOOL FALSE +EXTENDED_SOURCE_RAW_RADIUS BOOL FALSE # use circular (T) or elliptical (F) contours for petrosians? EXTENDED_SOURCE_SN_LIM F32 20.0 -EXTENDED_SOURCE_RAW_RADIUS BOOL FALSE -EXTENDED_SOURCE_PETROSIAN BOOL FALSE -EXTENDED_SOURCE_ISOPHOTAL BOOL FALSE -EXTENDED_SOURCE_ANNULI BOOL FALSE -EXTENDED_SOURCE_KRON BOOL FALSE -PETROSIAN_FOR_STARS BOOL FALSE + +EXT.NSIGMA.LIMIT.USE BOOL TRUE + +# Extended Model to use for forced photometry in full force +# In addtion to PS_MODEL_SERSIC, PS_MODEL_DEV, and PS_MODEL_EXP the values BEST and ALL may be selected +# This specifies what gets saved in cff file output by psastro +EXT_MODEL_TYPE_FOR_CFF STR ALL +# this model is forced +EXT_MODEL_TYPE_FORCE STR PS_MODEL_SERSIC + +# if the sersic model is selected, the dev model will also be forced for sources with sersic index above this limit +# (Note: this is not used if BEST was selected) +EXT_MODEL_FORCE_DEV_SERSIC_MIN F32 3.0 + +# to avoid forcing extended models for likely stars +# only force sources with kron mag - psf mag less than this value ... +EXT_MODEL_FORCE_MAGDIFF_MAX F32 0.0 +# ... unless SN is less than this value +EXT_MODEL_FORCE_CUT_SN_MIN F32 10.0 + +# Limits on extended source fits by galactic coordinates +EXT.FIT.MIN.GAL.LIMIT.USE BOOL FALSE # if true apply the galactic latitude cut +# objects are skipped for extended source fits if they have a abs(galactic latitude) larger than +# a limit value which is a function of galactic longitude. +# The galactic latitude limit is the sum of the following constant value ... +EXT.FIT.MIN.GAL.LIMIT F32 20.0 +# ... and a gaussian function of galactic longitude centered at b = 0 with this magnitude +EXT.FIT.MIN.GAL.LIMIT.BULGE F32 15.0 +# ... and this sigma +EXT.FIT.MIN.GAL.LIMIT.BULGE.SIGMA F32 50.0 # with this sigma value + KRON_ITERATIONS S32 2 @@ -207,6 +234,10 @@ # these models are used for high-quality shape analysis after all sources have been removed EXTENDED_SOURCE_FITS BOOL FALSE # perform the detailed extended sourc fits? +EXTENDED_SOURCE_FITS_INTERACTIVE BOOL FALSE # perform the detailed extended sourc fits? +EXTENDED_SOURCE_FITS_POISSON BOOL FALSE # use poisson errors for extended source models EXTENDED_SOURCE_MODELS_SELECTION STR ALL + +LENSING_PARAMETERS BOOL FALSE # extended source models applied to sources @@ -221,7 +252,7 @@ #QGAUSS_PSF EXTENDED_SOURCE_MODEL PS_MODEL_QGAUSS 20.0 TRUE # TRAIL_RAW EXTENDED_SOURCE_MODEL PS_MODEL_TRAIL 10.0 FALSE - EXP_PCM EXTENDED_SOURCE_MODEL PS_MODEL_EXP 10.0 TRUE - DEV_PCM EXTENDED_SOURCE_MODEL PS_MODEL_DEV 10.0 TRUE - SER_PCM EXTENDED_SOURCE_MODEL PS_MODEL_SERSIC 10.0 TRUE + EXP_PCM EXTENDED_SOURCE_MODEL PS_MODEL_EXP 0.0 TRUE + DEV_PCM EXTENDED_SOURCE_MODEL PS_MODEL_DEV 0.0 TRUE + SER_PCM EXTENDED_SOURCE_MODEL PS_MODEL_SERSIC 0.0 TRUE END @@ -257,10 +288,6 @@ # Extended source fit parameters EXTENDED_TEST METADATA - EXTENDED_SOURCE_ANALYSIS BOOL TRUE # perform any of the aperture-like measurements? EXTENDED_SOURCE_SN_LIM F32 20.0 EXTENDED_SOURCE_PETROSIAN BOOL TRUE - EXTENDED_SOURCE_ISOPHOTAL BOOL TRUE - EXTENDED_SOURCE_ANNULI BOOL TRUE - EXTENDED_SOURCE_KRON BOOL FALSE END @@ -292,5 +319,5 @@ INTERPOLATE_AP BOOL TRUE -POISSON.ERRORS.PHOT.LMM BOOL TRUE +POISSON.ERRORS.PHOT.LMM BOOL TRUE POISSON.ERRORS.PHOT.LIN BOOL FALSE POISSON.ERRORS.PARAMS BOOL TRUE @@ -407,4 +434,15 @@ END +EXT.ANALYSIS.MAG.LIMITS METADATA + TYPE DATA FILTER.ID MAG.LIMIT.PETRO MAG.LIMIT.EXTFIT + gband DATA g 25 21.5 + rband DATA r 25 21.5 + iband DATA i 25 21.5 + zband DATA z 25 20.5 + yband DATA y 25 19.5 + wband DATA w 25 21.5 + other DATA any 25 21.5 +END + # if true keep all matched sources, even if we get a non-finite aperture flux measurement PSPHOT.STACK.KEEP.BAD.MATCHES BOOL F @@ -413,11 +451,38 @@ RADIAL_APERTURES_SN_LIM F32 0.0 # S/N limit for radial aperture calculation +# zero point and exposure time to which fullForceSummary scales fluxes to +PSPHOT.FULLFORCE.EXPTIME F32 1.00 +PSPHOT.FULLFORCE.ZERO_PT F32 25.00 + + +GALAXY_SHAPES BOOL F +GALAXY_SHAPES_STYLE STR R_MAJ_R_MIN + +# new recipe values which set paramter spacing based on signal to noise +# DELTA = Q / SN +# F_MIN = 1 - NSIGMA * DELTA +# F_MAX = 1 + NSIGMA * DELTA +GALAXY_SHAPES_Q F32 1.5 # these values result in +GALAXY_SHAPES_NSIGMA F32 2.0 # a 5 x 5 grid +GALAXY_SHAPES_CLAMP_SN F32 50. # with minimum delta .03 pixels + +# These recipe values are no longer used +GALAXY_SHAPES_FR_MAJOR_MIN F32 0.8 +GALAXY_SHAPES_FR_MAJOR_MAX F32 1.60 +GALAXY_SHAPES_FR_MAJOR_DEL F32 0.2 +GALAXY_SHAPES_FR_MINOR_MIN F32 0.8 +GALAXY_SHAPES_FR_MINOR_MAX F32 1.60 +GALAXY_SHAPES_FR_MINOR_DEL F32 0.2 + + # Extended source fit parameters STACKPHOT METADATA EXTENDED_SOURCE_FITS BOOL TRUE # perform any of the aperture-like measurements? - EXTENDED_SOURCE_ANALYSIS BOOL TRUE # perform any of the aperture-like measurements? EXTENDED_SOURCE_SN_LIM F32 10.0 EXTENDED_SOURCE_PETROSIAN BOOL TRUE EXTENDED_SOURCE_ANNULI BOOL TRUE + EXT.NSIGMA.LIMIT.USE BOOL FALSE + EXT.FIT.MIN.GAL.LIMIT.USE BOOL TRUE # limit extended source fits by galactic coordinates + PSPHOT.STACK.MATCH.PSF.SOURCE STR AUTO # which inputs to convolve? (RAW, CNV, AUTO) PSPHOT.STACK.TARGET.PSF.AUTO BOOL F # automatically determine target PSF size? @@ -429,6 +494,5 @@ RADIAL_APERTURES BOOL T # calculate flux in circular radial apertures? RADIAL_APERTURES_SN_LIM F32 0.0 # S/N limit for radial aperture calculation - OUTPUT.FORMAT STR PS1_SV1 - PETROSIAN_FOR_STARS BOOL FALSE + OUTPUT.FORMAT STR PS1_SV3 # subtract radial profiles for extremely bright stars? @@ -438,8 +502,14 @@ POISSON.ERRORS.PHOT.LMM BOOL TRUE + LMM_FIT_CHISQ_CONVERGENCE BOOL FALSE # use the (old) chisq convergence or the new parameter one + LMM_FIT_GAIN_FACTOR_MODE S32 2 # there are 3 options to determine the gain factor (0,1,2) + EXT_FIT_MIN_TOL F32 0.1 # Fit tolerance for EXT + EXT_FIT_MAX_RADIUS F32 50.0 PSF_MODEL STR PS_MODEL_PS1_V1 EXT_MODEL STR PS_MODEL_QGAUSS PEAKS_NMAX_TOTAL S32 0 # set this to limit the allowed number of peaks - Yields fault instead of avoid memory explosion + + SAVE.RESID BOOL FALSE END @@ -447,8 +517,7 @@ STACKPHOT_TEST METADATA EXTENDED_SOURCE_FITS BOOL F # perform any of the aperture-like measurements? - EXTENDED_SOURCE_ANALYSIS BOOL F # perform any of the aperture-like measurements? EXTENDED_SOURCE_SN_LIM F32 10.0 EXTENDED_SOURCE_PETROSIAN BOOL F - EXTENDED_SOURCE_ANNULI BOOL F + PSPHOT.STACK.MATCH.PSF.SOURCE STR AUTO # which inputs to convolve? (RAW, CNV, AUTO) PSPHOT.STACK.TARGET.PSF.AUTO BOOL F # automatically determine target PSF size? @@ -457,5 +526,5 @@ RADIAL_APERTURES BOOL F # calculate flux in circular radial apertures? RADIAL_APERTURES_SN_LIM F32 0.0 # S/N limit for radial aperture calculation - OUTPUT.FORMAT STR PS1_SV1 + OUTPUT.FORMAT STR PS1_SV3 EXT_FIT_MAX_RADIUS F32 50.0 @@ -467,8 +536,7 @@ STACKPHOT_TEST_V1 METADATA EXTENDED_SOURCE_FITS BOOL F # perform any of the aperture-like measurements? - EXTENDED_SOURCE_ANALYSIS BOOL F # perform any of the aperture-like measurements? EXTENDED_SOURCE_SN_LIM F32 20.0 EXTENDED_SOURCE_PETROSIAN BOOL TRUE - EXTENDED_SOURCE_ANNULI BOOL TRUE + PSPHOT.STACK.MATCH.PSF.SOURCE STR AUTO # which inputs to convolve? (RAW, CNV, AUTO) PSPHOT.STACK.TARGET.PSF.AUTO BOOL F # automatically determine target PSF size? @@ -492,8 +560,7 @@ SINGLE_TEST_V1 METADATA EXTENDED_SOURCE_FITS BOOL F # perform any of the aperture-like measurements? - EXTENDED_SOURCE_ANALYSIS BOOL F # perform any of the aperture-like measurements? EXTENDED_SOURCE_SN_LIM F32 20.0 EXTENDED_SOURCE_PETROSIAN BOOL TRUE - EXTENDED_SOURCE_ANNULI BOOL TRUE + PSPHOT.STACK.MATCH.PSF.SOURCE STR AUTO # which inputs to convolve? (RAW, CNV, AUTO) PSPHOT.STACK.TARGET.PSF.AUTO BOOL F # automatically determine target PSF size? @@ -502,9 +569,6 @@ RADIAL_APERTURES BOOL F # calculate flux in circular radial apertures? RADIAL_APERTURES_SN_LIM F32 0.0 # S/N limit for radial aperture calculation -# OUTPUT.FORMAT STR PS1_SV1 OUTPUT.FORMAT STR PS1_V3 - # CONSTANT_PHOTOMETRIC_WEIGHTS BOOL TRUE - # POISSON.ERRORS.PHOT.LMM BOOL FALSE CONSTANT_PHOTOMETRIC_WEIGHTS BOOL FALSE POISSON.ERRORS.PHOT.LMM BOOL TRUE @@ -621,6 +685,18 @@ # Extended source fit parameters # these models are used for high-quality shape analysis after all sources have been removed + SAVE.RESID BOOL T + EXTENDED_SOURCE_FITS BOOL TRUE # perform the detailed extended sourc fits? - EXT_MODEL STR PS_MODEL_EXP + EXT_MODEL STR PS_MODEL_QGAUSS + PSF_MODEL STR PS_MODEL_PS1_V1 + + LMM_FIT_CHISQ_CONVERGENCE BOOL FALSE # use the (old) chisq convergence or the new parameter one + LMM_FIT_GAIN_FACTOR_MODE S32 2 # there are 3 options to determine the gain factor (0,1,2) + EXT_FIT_MIN_TOL F32 0.1 # Fit tolerance for EXT + + # XXX these are only needed if we want to get perfect fits of the synthetic data + PSF_FIT_RADIUS_SCALE F32 3.75 + EXT_FIT_NSIGMA_CONV F32 11 + PSF.RESIDUALS BOOL F # if this is defined, it gives a list of the model names to fit below (ALL or NONE are also valid) @@ -647,2 +723,15 @@ END END + +FULLFORCE_WARP METADATA + GALAXY_SHAPES BOOL TRUE + RADIAL_APERTURES BOOL TRUE + EXTENDED_SOURCE_FITS BOOL TRUE # this casues the xfit extension to be written out + EXTENDED_SOURCE_PETROSIAN BOOL TRUE # To measure petrosian magnitudes + EXTENDED_SOURCE_ANNULI BOOL TRUE + LENSING_PARAMETERS BOOL TRUE + SAVE.PSF BOOL FALSE + SAVE.BACKMDL BOOL FALSE + SAVE.RESID BOOL FALSE + OUTPUT.FORMAT STR PS1_V5 +END Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/reductionClasses.mdc =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/reductionClasses.mdc (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/recipes/reductionClasses.mdc (revision 37065) @@ -615,4 +615,10 @@ THREEPI_STACK_1DG METADATA STACK_PPSTACK STR STACK_THREEPI + STACK_PPSUB STR STACK_1DG + STACK_PSPHOT STR STACK +END + +CNP_STACK_1DG METADATA + STACK_PPSTACK STR STACK_CNP STACK_PPSUB STR STACK_1DG STACK_PSPHOT STR STACK @@ -663,4 +669,15 @@ STACKPHOT_SINGLE_PSPHOT STR STACKPHOT_SINGLE STATICSKY_CALIBRATION STR STATICSKY_DEEPCAL +END + +MDTHREEPI_DEEP_STACK_1DG METADATA + STACK_PPSTACK STR STACK_MDTHREEPI_DEEP_1DG + STACK_PPSUB STR STACK_1DG + STACK_PSPHOT STR STACK + STACKPHOT_PSPHOT STR STACKPHOT + STACKPHOT_PPSUB STR STACKPHOT_1DG + STACKPHOT_PPSTACK STR STACKPHOT + STACKPHOT_SINGLE_PSPHOT STR STACKPHOT_SINGLE + STATICSKY_CALIBRATION STR STATICSKY_DEEPCAL END Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/simple/camera.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/simple/camera.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/simple/camera.config (revision 37065) @@ -61,4 +61,5 @@ CMF.XFIT STR xfit CMF.DETEFF STR deteff + CMF.XGAL STR xgal PSF.HEAD STR hdr Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/simtest/format.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/simtest/format.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/simtest/format.config (revision 37065) @@ -60,5 +60,5 @@ FPA.LATITUDE F64 20.7070999146 # North Latitude in Degrees FPA.ELEVATION F32 3048.0 # altitude in meters - CELL.SATURATION F32 65535 + CELL.SATURATION F32 1000000 CELL.BAD F32 0 CELL.READDIR S32 1 Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/Makefile.am =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/Makefile.am (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/Makefile.am (revision 37065) @@ -0,0 +1,26 @@ + +installdir = $(datadir)/ippconfig/suprime + +install_files = \ + dvo.config \ + dvo.layout \ + camera.config \ + format_raw.config \ + format_mef.config \ + format_split.config \ + ppImage.config \ + ppMerge.config \ + psastro.config \ + psphot.config \ + pswarp.config \ + ppStack.config \ + rejections.config + +install_DATA = $(install_files) + +install-data-hook: + chmod 0755 $(installdir) + +EXTRA_DIST = $(install_files) + +ACLOCAL_AMFLAGS = -I m4 Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/camera.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/camera.config (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/camera.config (revision 37065) @@ -0,0 +1,133 @@ +# Camera configuration file for MegaCam: describes the camera + +# File formats that we know about +FORMATS METADATA + MEF STR suprime/format_mef.config + RAW STR suprime/format_raw.config + SPLIT STR suprime/format_split.config +END + +# Description of camera --- all the chips and the cells that comprise them +FPA METADATA + XY01 STR Cell + XY11 STR Cell + XY21 STR Cell + XY00 STR Cell + XY10 STR Cell + XY20 STR Cell + XY41 STR Cell + XY31 STR Cell + XY40 STR Cell + XY30 STR Cell + XY01_raw STR ch1 ch2 ch3 ch4 + XY11_raw STR ch1 ch2 ch3 ch4 + XY21_raw STR ch1 ch2 ch3 ch4 + XY00_raw STR ch1 ch2 ch3 ch4 + XY10_raw STR ch1 ch2 ch3 ch4 + XY20_raw STR ch1 ch2 ch3 ch4 + XY41_raw STR ch1 ch2 ch3 ch4 + XY31_raw STR ch1 ch2 ch3 ch4 + XY40_raw STR ch1 ch2 ch3 ch4 + XY30_raw STR ch1 ch2 ch3 ch4 +END + +# move this elsewhere? we need a lookup table to go from filter ID to abstract name +FILTER.ID METADATA + Rc STR W-C-RC + Vr STR W-J-VR + + B STR W-J-B + V STR W-J-V + R STR W-C-RC + I STR W-C-IC + g STR W-S-G+ + r STR W-S-R+ + i STR W-S-I+ + z STR W-S-Z+ + + Y STR W-J-Y +END + +# Table of strings to use for the class identifier (see ippdb) according to the file level. +CLASSID METADATA + FPA STR fpa + CHIP STR {CHIP.NAME} + CELL STR {CHIP.NAME}:{CELL.NAME} + fpa STR fpa + chip STR {CHIP.NAME} + cell STR {CHIP.NAME}:{CELL.NAME} +END + +DVO.CAMERADIR STR suprime # Camera directory for DVO + +# convert supplied FPA.OBSTYPE values to abstract exptype names +OBSTYPE.TABLE METADATA + bias STR BIAS + zero STR BIAS + dark STR DARK + flat STR SKYFLAT + skyflat STR SKYFLAT + domeflat STR DOMEFLAT + object STR OBJECT + science STR OBJECT +END + +# Recipe options +RECIPES METADATA + # Other recipes + PSPHOT STR suprime/psphot.config # psphot details + PSASTRO STR suprime/psastro.config # psastro details + PSWARP STR suprime/pswarp.config # pswarp details + PPIMAGE STR suprime/ppImage.config # ppImage recipe + REJECTIONS STR suprime/rejections.config # rejection recipe + PPMERGE STR suprime/ppMerge.config # ppMerge recipe + PPSTACK STR suprime/ppStack.config # ppStack recipe +END + +# reduction classes (recipes which are grouped together) +REDUCTION STR recipes/reductionClasses.mdc + +FITSTYPES STR recipes/fitstypes.mdc + +FILERULES STR recipes/filerules-split.mdc # File rules appropriate for MEF format + +EXTNAME.RULES METADATA + CMF.HEAD STR {CHIP.NAME}.hdr + CMF.DATA STR {CHIP.NAME}.psf # use .PSF and .EXT? + CMF.XSRC STR {CHIP.NAME}.xsrc # use .PSF and .EXT? + CMF.XFIT STR {CHIP.NAME}.xfit # use .PSF and .EXT? + CMF.XRAD STR {CHIP.NAME}.xrad # use .PSF and .EXT? + CMF.DETEFF STR {CHIP.NAME}.deteff + + PSF.HEAD STR {CHIP.NAME}.hdr + PSF.TABLE STR {CHIP.NAME}.psf_model + PSF.RESID STR {CHIP.NAME}.psf_resid + + REF.ASTROM STR {CHIP.NAME}.ref_astrom +END + +BLANK.HEADERS METADATA + FPA.TIME STR MJD + FPA.EXPOSURE STR EXPTIME + FPA.AIRMASS STR AIRMASS + FPA.OBS STR EXP-ID +END + +PHOTCODE.RULE STR {DETECTOR}.{FILTER.ID}.{CHIP.N} # Rule for generating photcode + +BURNTOOL.STATE.GOOD S16 0 # Value for burntool_state with the most recent bt version. +BURNTOOL.STATE.GOOD.UPDATE S16 0 # for upddate processing accept earlier version + +FOV_REF F32 0 # Field of view of unvignetted region in FPA pixels. +FOV_MAX F32 0 +NPIX_REF S32 0 +NPIX_MAX S32 0 +NPIX_INTERCHIP S32 0 + +# This sets the maximum size for the fwhm_major. This is roughly 3", and 98.67% of all exposures in the database are less than this. +MAX_ALLOWED_FWHM F32 25 + +# don't censor any masked pixels +MASK.NO.CENSOR U32 4294967295 + +METADATA.COMPRESSION STR 7f # compression mode (nM): n = 1-9, M = f (filtered), h (Huffman), R (run-length) Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/dvo.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/dvo.config (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/dvo.config (revision 37065) @@ -0,0 +1,70 @@ + +# location of DVO database tables +CATDIR /data/alala.0/eugene/isp/catdir + +# word used to identify photcodes belonging to this camera +MOSAICNAME SUPRIMECAM + +# keywords used by DVO to interpret the headers + +# keyword abstractions: +#DATE-KEYWORD DATE-OBS +#DATE-MODE yyyy-mm-dd +#UT-KEYWORD UTC-OBS +JD-KEYWORD NONE +MJD-KEYWORD MJD + +# other keyword abstractions +EXPTIME-KEYWORD EXPTIME +AIRMASS-KEYWORD AIRMASS +CCDNUM-KEYWORD DET-ID +ST-KEYWORD NONE +OBSERVATORY-LATITUDE NONE +OBSERVATORY-LONGITUDE NONE +SUBPIX_DATAFILE NONE + +# instrumental magnitude range for calibration mode +CAL_INSTMAG_MAX 0 +CAL_INSTMAG_MIN 0 + +# exclude overscan region from the dB image boundaries +XOVERSCAN 0 +YOVERSCAN 0 + +# only upload stars within region; a value of 0 means ignore the limit +ADDSTAR_XMIN 0 +ADDSTAR_XMAX 0 +ADDSTAR_YMIN 0 +ADDSTAR_YMAX 0 + +# exclude stars with SN > SNLIMIT (ADDSTAR_SNLIMIT overrides old name MIN_SN_FSTAT) +ADDSTAR_SNLIMIT 0 + +# correlation radius (arcseconds) +ADDSTAR_RADIUS 1.0 + +# scaled correlation radius +ADDSTAR_NSIGMA 0 + +IMAGE_SCATTER 0.075 # mark images POOR if stdev(Mcal) > IMAGE_SCATTER +STAR_SCATTER 0.005 # mark stars POOR if stdev(Mrel) > STAR_SCATTER +IMAGE_OFFSET 0.100 # mark images POOR if abs(delta(Mcal)) > IMAGE_OFFSET +STAR_CHISQ 10.0 # mark stars POOR if Xm > STAR_CHISQ +STAR_TOOFEW 3 # mark star FEW if N(good) < STAR_TOOFEW +IMAGE_TOOFEW 10 # mark image FEW if N(good) < IMAGE_TOOFEW +IMAGE_GOOD_FRACTION 0.05 # mark image FEW if N(good) < IMAGE_GOOD_FRACTION * Nstars + +SCATTER_LIM 15.0 +MAG_LIM 20.0 # select stars brighter than this for relphot analysis +SIGMA_LIM 0.015 # select measurements with dM < SIGMA_LIM for relphot analysis +# INST_MAG_MIN -17 # optional constraints on magnitude ranges +# INST_MAG_MAX -13 # optional constraints on magnitude ranges + +RELPHOT_GRID_BINNING 256 +RELPHOT_GRID_X 6 +RELPHOT_GRID_Y 14 + +PM_DT_MIN 0.25 +PM_TOOFEW 4 +POS_TOOFEW 1 + Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/dvo.layout =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/dvo.layout (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/dvo.layout (revision 37065) @@ -0,0 +1,27 @@ +# this file defines the layout of the mosaic imager: + +# NCCD 40 # this needs work: sometimes 36, sometimes 40 +NCCD 10 +NAXIS1 2048 +NAXIS2 4225 + +MOSAIC_X 5 +MOSAIC_Y 2 + +# lines need to contain: + +CHIPID_KEYWORD EXTNAME + +# ID CHIPID xoffset yoffset xflip yflip datasec biassec Xo Yo theta +nausicaa XY01 23 3 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +kiki XY11 2121 2 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +fio XY21 4221 0 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +sophie XY00 0 4207 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +sheeta XY10 2095 4229 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +satsuki XY20 4208 4254 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +chihiro XY41 8429 65 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +clarisse XY31 6337 26 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +ponyo XY40 8405 4253 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +san XY30 6315 4252 1 0 [520:2264,49:4225] [521:568,1:48] 0 0 0 +# can we use header to find biassec +USE_BIASSEC 1 Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/format_mef.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/format_mef.config (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/format_mef.config (revision 37065) @@ -0,0 +1,190 @@ +# The spliced MecaCam data is stored in single extensions for each chip + +# How to recognise this type +RULE METADATA + TELESCOP STR Subaru +# DETECTOR STR MegaCam + INSTRUME STR SuprimeCam +# NAXIS S32 2 + EXTEND BOOL T + PSMOSIAC STR CHIP +# HISTORY STR imsplice: Splicing results in all detectors as if read from A amplifier +END + +FILE METADATA + # How to read this data + PHU STR FPA # The FITS file represents an entire FPA + EXTENSIONS STR CHIP # The extensions represent chips + FPA.OBS STR EXP-ID # A PHU keyword for unique identifier +# CONTENT STR DETECTOR # Key to the CONTENTS menu +# CHIP.NAME STR DETECTOR +# CONTENT.RULE STR {CHIP.NAME} # How to derive the CONTENT when writing +END + +# What's in the FITS file? +CONTENTS METADATA + # Extension name, chipName:chipType + nausicaa STR XY01:spcam20080721 + kiki STR XY11:spcam20080721 + fio STR XY21:spcam20080721 + sophie STR XY00:spcam20080721 + sheeta STR XY10:spcam20080721 + satsuki STR XY20:spcam20080721 + chihiro STR XY41:spcam20080721 + clarisse STR XY31:spcam20080721 + ponyo STR XY40:spcam20080721 + san STR XY30:spcam20080721 + + XY01 STR XY01:spcam20080721 + XY11 STR XY11:spcam20080721 + XY21 STR XY21:spcam20080721 + XY00 STR XY00:spcam20080721 + XY10 STR XY10:spcam20080721 + XY20 STR XY20:spcam20080721 + XY41 STR XY41:spcam20080721 + XY31 STR XY31:spcam20080721 + XY40 STR XY40:spcam20080721 + XY30 STR XY30:spcam20080721 + +END + +# Specify the chips +CHIPS METADATA + # Chip type, cellName:cellType + spcam20080721 STR cell:cell +END + + +# Specify the cells +CELLS METADATA + # Cell type, concepts to use + cell METADATA + CELL.BIASSEC.SOURCE STR VALUE + CELL.TRIMSEC.SOURCE STR VALUE + CELL.BIASSEC STR [521:568,1:48] + CELL.TRIMSEC STR [520:2264,49:4225] + CELL.X0 S32 0 + CELL.GAIN.SOURCE STR HEADER + CELL.GAIN STR GAIN + END +END + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.OBS STR EXP-ID + FPA.AIRMASS STR AIRMASS + FPA.FILTERID STR FILTER01 + FPA.FILTER STR FILTER01 + FPA.OBSTYPE STR DATA-TYP + FPA.OBJECT STR OBJECT + FPA.TIME STR MJD + FPA.RA STR RA + FPA.DEC STR DEC + FPA.RADECSYS STR RADECSYS + FPA.POSANGLE STR INST-PA + FPA.FOCUS STR TELFOCUS # added at start of 03Am04 + FPA.ALT STR ALTITUDE + FPA.AZ STR AZIMUTH + FPA.TEMP STR DET-TMP + FPA.EXPOSURE STR EXPTIME + FPA.ZP STR ZPT_OBS + CHIP.TEMP STR DET-TMP + CELL.EXPOSURE STR EXPTIME + CELL.DARKTIME STR DARKTIME + CELL.READNOISE STR RDNOISE + CELL.TIME STR MJD + CELL.XBIN STR BIN-FCT1 + CELL.YBIN STR BIN-FCT2 +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA + FPA.TELESCOPE STR Subaru + FPA.INSTRUMENT STR SuprimeCam + FPA.DETECTOR STR kiki +# FPA.TIMESYS STR + CHIP.XSIZE S32 2048 + CHIP.YSIZE S32 4224 + CELL.XSIZE S32 2048 + CELL.YSIZE S32 4224 + CELL.XWINDOW S32 0 + CELL.YWINDOW S32 0 + CELL.READDIR S32 1 # Cell is read in x direction + CELL.SATURATION F32 50000.0 + CELL.BAD F32 0 + CELL.XPARITY S32 1 + CELL.YPARITY S32 1 + CELL.Y0 S32 0 +# CELL.TIMESYS STR UTC + CELL.TRIMSEC STR [1:2264,49:4225] + CHIP.X0.DEPEND STR CHIP.NAME + CHIP.X0 METADATA + XY01 S32 23 + XY11 S32 2121 + XY21 S32 4221 + XY00 S32 0 + XY10 S32 2095 + XY20 S32 4208 + XY41 S32 8429 + XY31 S32 6337 + XY40 S32 8405 + XY30 S32 6315 + END + + CHIP.Y0.DEPEND STR CHIP.NAME + CHIP.Y0 METADATA + XY01 S32 3 + XY11 S32 2 + XY21 S32 0 + XY00 S32 4207 + XY10 S32 4229 + XY20 S32 4254 + XY41 S32 65 + XY31 S32 26 + XY40 S32 4253 + XY30 S32 4252 + END + + CHIP.XPARITY.DEPEND STR CHIP.NAME + CHIP.XPARITY METADATA + XY01 S32 -1 + XY11 S32 -1 + XY21 S32 -1 + XY00 S32 -1 + XY10 S32 -1 + XY20 S32 -1 + XY41 S32 -1 + XY31 S32 -1 + XY40 S32 -1 + XY30 S32 -1 + END + + CHIP.YPARITY.DEPEND STR CHIP.NAME + CHIP.YPARITY METADATA + XY01 S32 1 + XY11 S32 1 + XY21 S32 1 + XY00 S32 1 + XY10 S32 1 + XY20 S32 1 + XY41 S32 1 + XY31 S32 1 + XY40 S32 1 + XY30 S32 1 + END +END + + +# How to translation PS concepts into database lookups +DATABASE METADATA +# CELL.GAIN STR SELECT gain FROM camera WHERE chip_id = '{CHIP.NAME}' AND cell_id = '{CELL.NAME}' +END + +# Where there might be some ambiguity, specify the format +FORMATS METADATA + FPA.RA STR HOURS + FPA.DEC STR DEGREES + FPA.TIME STR MJD + CELL.TIME STR MJD +END + Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/format_raw.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/format_raw.config (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/format_raw.config (revision 37065) @@ -0,0 +1,223 @@ +# The split MecaCam data is stored as single files for each chip, each a simple fits image + +# How to recognise this type +RULE METADATA + TELESCOP STR Subaru + INSTRUME STR SuprimeCam + NAXIS S32 2 + NAXIS1 S32 2272 + NAXIS2 S32 4273 +END + +FILE METADATA + # How to read this data + PHU STR CHIP # The FITS file represents a chip + EXTENSIONS STR NONE # There are no extensions + FPA.OBS STR EXP-ID # A PHU keyword for unique identifier + CONTENT STR DETECTOR # Key to the CONTENTS menu + CONTENT.RULE STR {CHIP.NAME} # How to derive the CONTENT when writing +END + +# What's in the FITS file? +CONTENTS METADATA + # Content name, chipType + nausicaa STR XY01_raw:spcam20080721 + kiki STR XY11_raw:spcam20080721 + fio STR XY21_raw:spcam20080721 + sophie STR XY00_raw:spcam20080721 + sheeta STR XY10_raw:spcam20080721 + satsuki STR XY20_raw:spcam20080721 + chihiro STR XY41_raw:spcam20080721 + clarisse STR XY31_raw:spcam20080721 + ponyo STR XY40_raw:spcam20080721 + san STR XY30_raw:spcam20080721 +END + +# Specify the chips +CHIPS METADATA + # Chip type, cellName:cellType + spcam20080721 METADATA + ch1 STR ch1:ch1 + ch2 STR ch2:ch2 + ch3 STR ch4:ch3 + ch4 STR ch4:ch4 + END +END + + +# Specify the cells +CELLS METADATA + # Cell type, concepts for this type + ch1 METADATA + CELL.BIASSEC.SOURCE STR VALUE + CELL.TRIMSEC.SOURCE STR VALUE + CELL.BIASSEC STR [521:568,1:48] + CELL.TRIMSEC STR [9:520:49,4225] + CELL.X0 S32 0 + CELL.GAIN.SOURCE STR HEADER + CELL.GAIN STR GAIN + END + # Cell type, concepts for this type + ch2 METADATA + CELL.BIASSEC.SOURCE STR VALUE + CELL.TRIMSEC.SOURCE STR VALUE + CELL.BIASSEC STR [569:616,1:48] + CELL.TRIMSEC STR [617:1128,49:4225] + CELL.X0 S32 0 + CELL.GAIN.SOURCE STR HEADER + CELL.GAIN STR GAIN + END + # Cell type, concepts for this type + ch3 METADATA + CELL.BIASSEC.SOURCE STR VALUE + CELL.TRIMSEC.SOURCE STR VALUE + CELL.BIASSEC STR [1657:1704,1:48] + CELL.TRIMSEC STR [1145:1656,49:4225] + CELL.X0 S32 0 + CELL.GAIN.SOURCE STR HEADER + CELL.GAIN STR GAIN + END + # Cell type, concepts for this type + ch4 METADATA + CELL.BIASSEC.SOURCE STR VALUE + CELL.TRIMSEC.SOURCE STR VALUE + CELL.BIASSEC STR [1705:1752,1:48] + CELL.TRIMSEC STR [1753:2264,49:4225] + CELL.X0 S32 0 + CELL.GAIN.SOURCE STR HEADER + CELL.GAIN STR GAIN + END +END + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.OBS STR EXP-ID + FPA.DETECTOR STR DETECTOR + FPA.AIRMASS STR AIRMASS + FPA.FILTER STR FILTER01 + FPA.FILTERID STR FILTER01 + FPA.POSANGLE STR INST-PA + FPA.RA STR RA + FPA.DEC STR DEC + FPA.RADECSYS STR RADECSYS + FPA.OBSTYPE STR DATA-TYP + FPA.OBJECT STR OBJECT + FPA.FOCUS STR FOC-VAL + FPA.TIME STR MJD + FPA.TIMESYS STR TIMESYS + FPA.ALT STR ALTITUDE + FPA.AZ STR AZIMUTH + FPA.TEMP STR DET-TMP + FPA.EXPOSURE STR EXPTIME + CHIP.TEMP STR DET-TMP + CELL.EXPOSURE STR EXPTIME + CELL.DARKTIME STR DARKTIME +# CELL.READNOISE STR RDNOISE + CELL.TIME STR MJD + CELL.TIMESYS STR TIMESYS + CELL.XBIN STR BIN-FCT1 + CELL.YBIN STR BIN-FCT2 + + # FPA.TELTEMP.M1 STR TELTEMM1 # Primary mirror temps (C) + # FPA.TELTEMP.M1CELL STR TELTEMMS # Primary mirror support temps (C) + # FPA.TELTEMP.M2 STR TELTEMM2 # Secondary mirror temps (C + # FPA.TELTEMP.SPIDER STR TELTEMSP # Spider temperatures (C) + FPA.TELTEMP.TRUSS STR DOM-TMP # Mid truss temperatures (C + FPA.TELTEMP.EXTRA STR OUT-TMP # Miscellaneous temperatures (C) +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA + FPA.TELESCOPE STR Subaru + FPA.INSTRUMENT STR SuprimeCam + CHIP.XSIZE S32 2048 + CHIP.YSIZE S32 4224 + CELL.XSIZE S32 2048 + CELL.YSIZE S32 4224 + CELL.XWINDOW S32 0 + CELL.YWINDOW S32 0 + CELL.SATURATION S32 60000 + CELL.READDIR S32 1 # Cell is read in x direction + CELL.SATURATION F32 50000.0 + CELL.READNOISE F32 5.0 # XXX wild guess + CELL.BAD F32 0 + CELL.XPARITY S32 1 + CELL.YPARITY S32 1 + CELL.Y0 S32 0 + CHIP.X0.DEPEND STR CHIP.NAME + + CHIP.X0 METADATA + XY01 S32 23 + XY11 S32 2121 + XY21 S32 4221 + XY00 S32 0 + XY10 S32 2095 + XY20 S32 4208 + XY41 S32 8429 + XY31 S32 6337 + XY40 S32 8405 + XY30 S32 6315 + END + CHIP.Y0.DEPEND STR CHIP.NAME + CHIP.Y0 METADATA + XY01 S32 3 + XY11 S32 2 + XY21 S32 0 + XY00 S32 4207 + XY10 S32 4229 + XY20 S32 4254 + XY41 S32 65 + XY31 S32 26 + XY40 S32 4253 + XY30 S32 4252 + END + + CHIP.XPARITY.DEPEND STR CHIP.NAME + CHIP.XPARITY METADATA + XY01 S32 -1 + XY11 S32 -1 + XY21 S32 -1 + XY00 S32 -1 + XY10 S32 -1 + XY20 S32 -1 + XY41 S32 -1 + XY31 S32 -1 + XY40 S32 -1 + XY30 S32 -1 + END + CHIP.YPARITY.DEPEND STR CHIP.NAME + CHIP.YPARITY METADATA + XY01 S32 1 + XY11 S32 1 + XY21 S32 1 + XY00 S32 1 + XY10 S32 1 + XY20 S32 1 + XY41 S32 1 + XY31 S32 1 + XY40 S32 1 + XY30 S32 1 + END +END + + +# How to translation PS concepts into database lookups +DATABASE METADATA + TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS +# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME +# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME + +# A database entry refers to a particular column (COLUMN) in a +# particular table (TABLE), given certain PS concepts (GIVENPS) that +# match certain database columns (GIVENDBCOL). +END + + +# Where there might be some ambiguity, specify the format +FORMATS METADATA + FPA.RA STR HOURS + FPA.DEC STR DEGREES + FPA.TIME STR MJD + CELL.TIME STR MJD +END + Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/format_split.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/format_split.config (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/format_split.config (revision 37065) @@ -0,0 +1,199 @@ +# The split MecaCam data is stored as single files for each chip, each a simple fits image + +# How to recognise this type +RULE METADATA + TELESCOP STR Subaru + INSTRUME STR SuprimeCam + OBSERVAT STR NAOJ +# NAXIS S32 2 +END + +FILE METADATA + # How to read this data + PHU STR CHIP # The FITS file represents a chip + EXTENSIONS STR NONE # There are no extensions + FPA.OBS STR EXP-ID # A PHU keyword for unique identifier + CONTENT STR DETECTOR # Key to the CONTENTS menu + CONTENT.RULE STR {CHIP.NAME} # How to derive the CONTENT when writing +END + +# What's in the FITS file? +CONTENTS METADATA + # Content name, chipType + nausicaa STR XY01:spcam20080721 + kiki STR XY11:spcam20080721 + fio STR XY21:spcam20080721 + sophie STR XY00:spcam20080721 + sheeta STR XY10:spcam20080721 + satsuki STR XY20:spcam20080721 + chihiro STR XY41:spcam20080721 + clarisse STR XY31:spcam20080721 + ponyo STR XY40:spcam20080721 + san STR XY30:spcam20080721 + + XY01 STR XY01:spcam20080721 + XY11 STR XY11:spcam20080721 + XY21 STR XY21:spcam20080721 + XY00 STR XY00:spcam20080721 + XY10 STR XY10:spcam20080721 + XY20 STR XY20:spcam20080721 + XY41 STR XY41:spcam20080721 + XY31 STR XY31:spcam20080721 + XY40 STR XY40:spcam20080721 + XY30 STR XY30:spcam20080721 +END + +# Specify the chips +CHIPS METADATA + # Chip type, cellName:cellType + spcam20080721 STR Cell:cell +END + + +# Specify the cells +CELLS METADATA + # Cell type, concepts for this type + cell METADATA + CELL.BIASSEC.SOURCE STR VALUE + CELL.TRIMSEC.SOURCE STR VALUE + CELL.BIASSEC STR [0:0,0:0] +# CELL.TRIMSEC STR [1:2048,1:4225] + CELL.TRIMSEC STR [1:2048,1:4177] + CELL.X0 S32 0 + CELL.GAIN.SOURCE STR HEADER + CELL.GAIN STR GAIN + END +END + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.OBS STR EXP-ID + FPA.DETECTOR STR DETECTOR + FPA.AIRMASS STR AIRMASS + FPA.FILTER STR FILTER01 + FPA.FILTERID STR FILTER01 + FPA.POSANGLE STR INST-PA + FPA.RA STR RA + FPA.DEC STR DEC + FPA.RADECSYS STR RADECSYS + FPA.OBSTYPE STR DATA-TYP + FPA.OBJECT STR OBJECT + FPA.FOCUS STR FOC-VAL + FPA.TIME STR MJD + FPA.TIMESYS STR TIMESYS + FPA.ALT STR ALTITUDE + FPA.AZ STR AZIMUTH + FPA.TEMP STR DET-TMP + FPA.EXPOSURE STR EXPTIME + CHIP.TEMP STR DET-TMP + CELL.EXPOSURE STR EXPTIME + CELL.DARKTIME STR DARKTIME +# CELL.READNOISE STR RDNOISE + CELL.TIME STR MJD + CELL.TIMESYS STR TIMESYS + CELL.XBIN STR BIN-FCT1 + CELL.YBIN STR BIN-FCT2 + + # FPA.TELTEMP.M1 STR TELTEMM1 # Primary mirror temps (C) + # FPA.TELTEMP.M1CELL STR TELTEMMS # Primary mirror support temps (C) + # FPA.TELTEMP.M2 STR TELTEMM2 # Secondary mirror temps (C + # FPA.TELTEMP.SPIDER STR TELTEMSP # Spider temperatures (C) + FPA.TELTEMP.TRUSS STR DOM-TMP # Mid truss temperatures (C + FPA.TELTEMP.EXTRA STR OUT-TMP # Miscellaneous temperatures (C) +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA + FPA.TELESCOPE STR Subaru + FPA.INSTRUMENT STR SuprimeCam + CHIP.XSIZE S32 2048 + CHIP.YSIZE S32 4224 + CELL.XSIZE S32 2048 + CELL.YSIZE S32 4224 + CELL.XWINDOW S32 0 + CELL.YWINDOW S32 0 + CELL.SATURATION S32 60000 + CELL.READDIR S32 1 # Cell is read in x direction + CELL.SATURATION F32 50000.0 + CELL.READNOISE F32 5.0 # XXX wild guess + CELL.BAD F32 0 + CELL.XPARITY S32 1 + CELL.YPARITY S32 1 + CELL.Y0 S32 0 + CHIP.X0.DEPEND STR CHIP.NAME + + CHIP.X0 METADATA + XY01 S32 23 + XY11 S32 2121 + XY21 S32 4221 + XY00 S32 0 + XY10 S32 2095 + XY20 S32 4208 + XY41 S32 8429 + XY31 S32 6337 + XY40 S32 8405 + XY30 S32 6315 + END + CHIP.Y0.DEPEND STR CHIP.NAME + CHIP.Y0 METADATA + XY01 S32 3 + XY11 S32 2 + XY21 S32 0 + XY00 S32 4207 + XY10 S32 4229 + XY20 S32 4254 + XY41 S32 65 + XY31 S32 26 + XY40 S32 4253 + XY30 S32 4252 + END + + CHIP.XPARITY.DEPEND STR CHIP.NAME + CHIP.XPARITY METADATA + XY01 S32 -1 + XY11 S32 -1 + XY21 S32 -1 + XY00 S32 -1 + XY10 S32 -1 + XY20 S32 -1 + XY41 S32 -1 + XY31 S32 -1 + XY40 S32 -1 + XY30 S32 -1 + END + CHIP.YPARITY.DEPEND STR CHIP.NAME + CHIP.YPARITY METADATA + XY01 S32 1 + XY11 S32 1 + XY21 S32 1 + XY00 S32 1 + XY10 S32 1 + XY20 S32 1 + XY41 S32 1 + XY31 S32 1 + XY40 S32 1 + XY30 S32 1 + END +END + + +# How to translation PS concepts into database lookups +DATABASE METADATA + TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS +# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME +# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME + +# A database entry refers to a particular column (COLUMN) in a +# particular table (TABLE), given certain PS concepts (GIVENPS) that +# match certain database columns (GIVENDBCOL). +END + + +# Where there might be some ambiguity, specify the format +FORMATS METADATA + FPA.RA STR HOURS + FPA.DEC STR DEGREES + FPA.TIME STR MJD + CELL.TIME STR MJD +END + Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/ppImage.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/ppImage.config (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/ppImage.config (revision 37065) @@ -0,0 +1,193 @@ +### ppImage recipe configuration file for Megacam + +# Overscan subtraction +OVERSCAN.SINGLE BOOL FALSE # Reduce overscan to a single value? +OVERSCAN.FIT STR NONE # NONE | POLYNOMIAL | SPLINE +OVERSCAN.ORDER S32 0 # Order of polynomial fit +OVERSCAN.STAT STR MEAN # MEAN | MEDIAN + +# for a test, turn off selected detrend types +OVERSCAN BOOL FALSE # Overscan subtraction +BIAS BOOL TRUE # Bias subtraction +DARK BOOL FALSE # Dark subtraction +FLAT BOOL TRUE # Flat-field normalisation + +# binned output image options +BIN1.XBIN S32 18 +BIN1.YBIN S32 18 +BIN2.XBIN S32 144 +BIN2.YBIN S32 144 + +# megacam needs fringe subtraction +FRINGE BOOL TRUE # Fringe subtraction + +USE.DEBURNED.IMAGE BOOL FALSE # Skip burntool + +# this table lists extra constraints which should be applied when +# selecting the detrend images. +# note: camera and time are always applied + +DETREND.CONSTRAINTS METADATA + BIAS METADATA + END + DARK METADATA +# EXPTIME STR FPA.EXPOSURE + END + FLAT METADATA + FILTER STR FPA.FILTERID +# DETTYPE STR DOMEFLAT.RAW +# VERSION STR SKYFLAT.RAW +# VERSION STR DOMEFLAT.CORR.XX +# VERSION STR SKYFLAT.CORR + END + FLAT_CORRECTION METADATA + FILTER STR FPA.FILTER + END + FRINGE METADATA + FILTER STR FPA.FILTER +# AIRMASS STR FPA.AIRMASS +# TWILIGHT STR FPA.TWILIGHT + END + SHUTTER METADATA + END + MASK METADATA + END +END + +# only apply the fringe for these filters +FRINGE.FILTERS MULTI +FRINGE.FILTERS STR i +FRINGE.FILTERS STR z + + +# Standard chip processing +CHIP METADATA + BASE.FITS BOOL FALSE # Save base detrended image? + BASE.MASK.FITS BOOL FALSE # Save base detrended image? + BASE.VARIANCE.FITS BOOL FALSE # Save base detrended image? + CHIP.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.VARIANCE.FITS BOOL TRUE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL TRUE # Flat-field normalisation + MASK BOOL FALSE # Mask bad pixels + FRINGE BOOL TRUE # Fringe subtraction + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? + PHOTOM BOOL TRUE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? +END + +# Overscan, bias, dark, shutter +PPIMAGE_OBDS METADATA + BASE.FITS BOOL TRUE # Save base detrended image? + BASE.MASK.FITS BOOL TRUE # Save base detrended image? + BASE.VARIANCE.FITS BOOL TRUE # Save base detrended image? + CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL FALSE # Save chip-mosaic-ed image? + CHIP.VARIANCE.FITS BOOL FALSE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL FALSE # Flat-field normalisation + MASK BOOL FALSE # Mask bad pixels + FRINGE BOOL FALSE # Fringe subtraction + PHOTOM BOOL FALSE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? +END + +# Overscan, bias, dark, shutter, flat-field +PPIMAGE_OBDSF METADATA + BASE.FITS BOOL TRUE # Save base detrended image? + BASE.MASK.FITS BOOL TRUE # Save base detrended image? + BASE.VARIANCE.FITS BOOL TRUE # Save base detrended image? + CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL FALSE # Save chip-mosaic-ed image? + CHIP.VARIANCE.FITS BOOL FALSE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL TRUE # Flat-field normalisation + MASK BOOL FALSE # Mask bad pixels + FRINGE BOOL FALSE # Fringe subtraction + PHOTOM BOOL FALSE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? +END + +# Overscan, bias, dark, shutter, flat-field, fringe +PPIMAGE_OBDSFR METADATA + BASE.FITS BOOL TRUE # Save base detrended image? + BASE.MASK.FITS BOOL TRUE # Save base detrended image? + BASE.VARIANCE.FITS BOOL TRUE # Save base detrended image? + CHIP.FITS BOOL FALSE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL FALSE # Save chip-mosaic-ed image? + CHIP.VARIANCE.FITS BOOL FALSE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL TRUE # Flat-field normalisation + MASK BOOL FALSE # Mask bad pixels + FRINGE BOOL TRUE # Fringe subtraction + PHOTOM BOOL FALSE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? +END + +# Overscan, bias, dark, shutter, flat-field, fringe, photom +PPIMAGE_OBDSFRP METADATA + BASE.FITS BOOL FALSE # Save base detrended image? + BASE.MASK.FITS BOOL FALSE # Save base detrended image? + BASE.VARIANCE.FITS BOOL FALSE # Save base detrended image? + CHIP.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.VARIANCE.FITS BOOL TRUE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL TRUE # Flat-field normalisation + MASK BOOL TRUE # Mask bad pixels + FRINGE BOOL TRUE # Fringe subtraction + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? + PHOTOM BOOL TRUE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? +END + +# Overscan, bias, dark, shutter, flat-field, fringe, photom, astrom +PPIMAGE_OBDSFRA METADATA + BASE.FITS BOOL FALSE # Save base detrended image? + BASE.MASK.FITS BOOL FALSE # Save base detrended image? + BASE.VARIANCE.FITS BOOL FALSE # Save base detrended image? + CHIP.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.MASK.FITS BOOL TRUE # Save chip-mosaic-ed image? + CHIP.VARIANCE.FITS BOOL TRUE # Save chip-mosaic-ed image? + OVERSCAN BOOL TRUE # Overscan subtraction + BIAS BOOL TRUE # Bias subtraction + DARK BOOL FALSE # Dark subtraction + SHUTTER BOOL FALSE # Shutter correction + FLAT BOOL TRUE # Flat-field normalisation + MASK BOOL TRUE # Mask bad pixels + FRINGE BOOL TRUE # Fringe subtraction + BIN1.FITS BOOL TRUE # Save 1st binned chip image? + BIN2.FITS BOOL TRUE # Save 2nd binned chip image? + PHOTOM BOOL TRUE # Source identification and photometry + ASTROM.CHIP BOOL FALSE # Astrometry per chip? + ASTROM.MOSAIC BOOL FALSE # Astrometry for mosaic? +END Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/ppMerge.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/ppMerge.config (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/ppMerge.config (revision 37065) @@ -0,0 +1,40 @@ + +# Bias combination --- don't want min/max rejection +PPMERGE_BIAS METADATA + REJ F32 3.0 # Rejection threshold (sigma) + ITER S32 2 # Number of rejection iterations + FRACHIGH F32 0.0 # Fraction of high pixels to reject immediately + FRACLOW F32 0.0 # Fraction of low pixels to reject immediately + WEIGHTS BOOL FALSE # Use image weights? + COMBINE STR CLIPPED # Statistic to use for combination: +END + +# Dark combination --- don't want min/max rejection +# More aggressive clipping than bias, so as to remove CRs +PPMERGE_DARK METADATA + REJ F32 2.0 # Rejection threshold (sigma) + ITER S32 4 # Number of rejection iterations + FRACHIGH F32 0.0 # Fraction of high pixels to reject immediately + FRACLOW F32 0.0 # Fraction of low pixels to reject immediately + WEIGHTS BOOL FALSE # Use image weights? + COMBINE STR CLIPPED # Statistic to use for combination: +END + +# Flat combination --- use min/max rejection +PPMERGE_FLAT METADATA + REJ F32 3.0 # Rejection threshold (sigma) + ITER S32 1 # Number of rejection iterations + FRACHIGH F32 0.3 # Fraction of high pixels to reject immediately + FRACLOW F32 0.1 # Fraction of low pixels to reject immediately + NKEEP S32 5 # Minimum number of pixels in stack to keep + WEIGHTS BOOL FALSE # Use image weights? + COMBINE STR MEAN # Statistic to use for combination: +END + + +# Fringe combination --- already included in default, above +PPMERGE_FRINGE METADATA + FRACHIGH F32 0.1 # Fraction of high pixels to reject immediately + WEIGHTS BOOL FALSE # Use image weights? +END + Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/ppStack.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/ppStack.config (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/ppStack.config (revision 37065) @@ -0,0 +1,2 @@ + CONVOLVE BOOL FALSE +# we don't need this for megacam Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/psastro.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/psastro.config (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/psastro.config (revision 37065) @@ -0,0 +1,195 @@ + +# save matched stars? +PSASTRO.SAVE.REFMATCH BOOL TRUE # save refstar matches as table in output smf file + +# astrometry matching parameters + +# nominal plate scale (microns / pixel) +PSASTRO.PIXEL.SCALE F32 1.0 + +# pmAstromGridAngle +# max grid offset in FP units (microns) +# use plate-scale to make this in pixels? +PSASTRO.GRID.OFFSET F32 750. +PSASTRO.GRID.SCALE F32 50. + +# extra field for ref stars: +PSASTRO.FIELD.PADDING F32 0.25 + +# pmAstromGridMatch parameters +PSASTRO.GRID.MIN.ANGLE F32 -0.5 # start angle (degrees) +PSASTRO.GRID.MAX.ANGLE F32 +0.5 +PSASTRO.GRID.DEL.ANGLE F32 0.25 + +PSASTRO.GRID.MIN.SCALE F32 0.96 +PSASTRO.GRID.MAX.SCALE F32 1.04 +PSASTRO.GRID.DEL.SCALE F32 0.02 + +# these tweak are in FP units (pixels, currently) +PSASTRO.TWEAK.SCALE F32 1 +PSASTRO.TWEAK.RANGE F32 150 +PSASTRO.TWEAK.SMOOTH F32 2 +PSASTRO.TWEAK.NSIGMA F32 3 + +# single-chip radius match in pixels +PSASTRO.MATCH.FIT.NITER S32 5 +PSASTRO.MATCH.RADIUS F32 100.0 +PSASTRO.MATCH.RADIUS.N0 F32 100.0 +PSASTRO.MATCH.RADIUS.N1 F32 60.0 +PSASTRO.MATCH.RADIUS.N2 F32 40.0 +PSASTRO.MATCH.RADIUS.N3 F32 30.0 +PSASTRO.MATCH.RADIUS.N4 F32 20.0 +PSASTRO.MATCH.UNIQ.ITER S32 4 +PSASTRO.CHIP.ORDER S32 1 + +PSASTRO.MAX.NRAW S32 1500 # max stars accepted for fitting (0 for all) +PSASTRO.MAX.NREF S32 1500 # max stars accepted for fitting (0 for all) + +PSASTRO.MIN.INST.MAG.RAW F32 -20.0 # min instrumental magnitude for stars accepted for fitting +PSASTRO.MAX.INST.MAG.RAW F32 -11.5 # max instrumental magnitude for stars accepted for fitting +PSASTRO.GRID.MIN.INST.MAG.RAW F32 -20.0 # min instrumental magnitude for stars accepted for grid search +PSASTRO.GRID.MAX.INST.MAG.RAW F32 -11.5 # max instrumental magnitude for stars accepted for grid search +PSASTRO.GRID.MIN.SIGMA F32 1.0 + +PSASTRO.MAX.ERROR F32 10.0 # max error in pixels +PSASTRO.MIN.NSTAR S32 5 # min fitted stars in solution + +PSASTRO.MAX.ALLOWED.FWHM F32 25 + +PSASTRO.MOSAIC.MODE BOOL TRUE + +# for iterations >= N, require a single match per reference +PSASTRO.MOSAIC.CHIP.NITER S32 5 # fit clipping iterations +PSASTRO.MOSAIC.CHIP.NSIGMA F32 3 # fit clipping sigmas +PSASTRO.MOSAIC.UNIQ.ITER S32 3 + +PSASTRO.MOSAIC.MAX.ERROR.N0 F32 1.00 # max allow error for valid solution (arcsec) +PSASTRO.MOSAIC.MAX.ERROR.N1 F32 1.00 # max allow error for valid solution (arcsec) +PSASTRO.MOSAIC.MAX.ERROR.N2 F32 1.00 # max allow error for valid solution (arcsec) +PSASTRO.MOSAIC.MAX.ERROR.N3 F32 1.00 # max allow error for valid solution (arcsec) +PSASTRO.MOSAIC.MAX.ERROR.N4 F32 2.00 # max allow error for valid solution (arcsec) +PSASTRO.MOSAIC.MAX.ERROR.N5 F32 5.00 # max allow error for valid solution (arcsec) + +PSASTRO.MOSAIC.RADIUS.N0 F32 40.0 +PSASTRO.MOSAIC.RADIUS.N1 F32 35.0 # do not refine the match +PSASTRO.MOSAIC.RADIUS.N2 F32 30.0 # do not refine the match +PSASTRO.MOSAIC.RADIUS.N3 F32 25.0 +PSASTRO.MOSAIC.RADIUS.N4 F32 20.0 +PSASTRO.MOSAIC.RADIUS.N5 F32 10.0 + +PSASTRO.MOSAIC.CHIP.ORDER S32 1 +PSASTRO.MOSAIC.CHIP.ORDER.N0 S32 1 # fit order (-1 means use default) +PSASTRO.MOSAIC.CHIP.ORDER.N1 S32 2 # fit order (-1 means use default) +PSASTRO.MOSAIC.CHIP.ORDER.N2 S32 2 # fit order (-1 means use default) +PSASTRO.MOSAIC.CHIP.ORDER.N3 S32 2 # fit order (-1 means use default) +PSASTRO.MOSAIC.CHIP.ORDER.N4 S32 2 # fit order (-1 means use default) +PSASTRO.MOSAIC.CHIP.ORDER.N5 S32 2 # fit order (-1 means use default) + +PSASTRO.MOSAIC.GRADIENT.NX S32 5 # number of x-dir cells per chip +PSASTRO.MOSAIC.GRADIENT.NY S32 5 # number of y-dir cells per chip + +# use this recipe to set a tight constraint +PSASTRO.FINE METADATA + PSASTRO.MOSAIC.MAX.ERROR.N0 F32 1.50 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N1 F32 1.50 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N2 F32 0.90 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N3 F32 0.90 # max allow error for valid solution (arcsec) + + PSASTRO.MOSAIC.RADIUS.N0 F32 8.0 + PSASTRO.MOSAIC.RADIUS.N1 F32 0.0 + PSASTRO.MOSAIC.RADIUS.N2 F32 4.0 + PSASTRO.MOSAIC.RADIUS.N3 F32 4.0 + + PSASTRO.MOSAIC.CHIP.ORDER.N0 S32 0 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N1 S32 1 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N2 S32 1 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N3 S32 1 # fit order (-1 means use default) +END + +# use this recipe to set a tight constraint +PSASTRO_COARSE METADATA + PSASTRO.GRID.SCALE F32 50.0 + PSASTRO.TWEAK.RANGE F32 1.0 + + DVO.GETSTAR.MIN.MAG F32 10.0 + DVO.GETSTAR.MAX.RHO F32 12000.0 + + PSASTRO.MAX.INST.MAG.RAW F32 -9.0 # max instrumental magnitude for stars accepted for fitting + PSASTRO.GRID.MAX.INST.MAG.RAW F32 -9.0 # max instrumental magnitude for stars accepted for grid search + + PSASTRO.GRID.MIN.SIGMA F32 4.0 + + PSASTRO.MATCH.FIT.NITER S32 4 + PSASTRO.MATCH.RADIUS.N0 F32 60.0 + PSASTRO.MATCH.RADIUS.N1 F32 30.0 + PSASTRO.MATCH.RADIUS.N2 F32 15.0 + PSASTRO.MATCH.RADIUS.N3 F32 8.0 + + PSASTRO.MOSAIC.MAX.ERROR.N0 F32 0.0 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N1 F32 0.0 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N2 F32 0.0 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N3 F32 0.0 # max allow error for valid solution (arcsec) + PSASTRO.MOSAIC.MAX.ERROR.N3 F32 2.0 # max allow error for valid solution (arcsec) + + PSASTRO.MOSAIC.RADIUS.N0 F32 60.0 + PSASTRO.MOSAIC.RADIUS.N1 F32 30.0 + PSASTRO.MOSAIC.RADIUS.N2 F32 15.0 + PSASTRO.MOSAIC.RADIUS.N3 F32 8.0 + PSASTRO.MOSAIC.RADIUS.N4 F32 4.0 + + PSASTRO.MOSAIC.CHIP.ORDER.N0 S32 0 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N1 S32 1 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N2 S32 1 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N3 S32 1 # fit order (-1 means use default) + PSASTRO.MOSAIC.CHIP.ORDER.N4 S32 1 # fit order (-1 means use default) +END + +PSASTRO.CATDIR STR PS1.REF.20120524 +DVO.GETSTAR.MAX.RHO F32 30000.0 +DVO.GETSTAR.MIN.MAG F32 -10.0 +DVO.GETSTAR.MIN.MAG.INST F32 -40.0 + +# we match the FILTER.ID (corresponding to the FILTER, see camera.config) to the dvo db PHOTCODE +PHOTCODE.DATA MULTI +PHOTCODE.DATA METADATA + FILTER STR u + ZEROPT F32 23.6 + PHOTCODE STR g +END +PHOTCODE.DATA METADATA + FILTER STR g + ZEROPT F32 26.46 + PHOTCODE STR g +END +PHOTCODE.DATA METADATA + FILTER STR r + ZEROPT F32 25.98 + PHOTCODE STR r +END +PHOTCODE.DATA METADATA + FILTER STR i + ZEROPT F32 25.74 + PHOTCODE STR i +END +PHOTCODE.DATA METADATA + FILTER STR z + ZEROPT F32 24.80 + PHOTCODE STR z +END +PHOTCODE.DATA METADATA + FILTER STR Vr + ZEROPT F32 25.0 + PHOTCODE STR g +END +PHOTCODE.DATA METADATA + FILTER STR Rc + ZEROPT F32 25.0 + PHOTCODE STR r +END + +# plotting options +PSASTRO.PLOT.INST.MAG.MAX F32 -9.0 +PSASTRO.PLOT.INST.MAG.MIN F32 -17.0 +PSASTRO.PLOT.REF.MAG.MIN F32 +10.0 +PSASTRO.PLOT.REF.MAG.MAX F32 +25.0 + Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/psphot.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/psphot.config (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/psphot.config (revision 37065) @@ -0,0 +1,30 @@ + +# turn these on to see specific outputs +SAVE.PLOTS BOOL FALSE + +# PSF model parameters : choose the PSF model desired +# PSF_MODEL STR PS_MODEL_QGAUSS +PSF_MODEL STR PS_MODEL_PS1_V1 +# PSF_MODEL STR PS_MODEL_RGAUSS + +PSF.TREND.MODE STR MAP +PSF.TREND.NX S32 1 +PSF.TREND.NY S32 1 +PSF_SN_LIM F32 5 # minimum S/N for stars used for PSF model + +PEAKS_SMOOTH_SIGMA F32 2.5 # smoothing kernel sigma in pixels +PEAKS_NSIGMA_LIMIT F32 5.0 # peak significance threshold +MOMENTS_SCALE F32 0.1 # PSFs are generally small, avoid the CRs + +PSF_FIT_RADIUS_SCALE F32 10.0 # fitting radius for test PSF model + +PSPHOT.CRMASK.APPLY BOOL TRUE # TEST THIS before enabling. + +MOMENTS_SX_MIN F32 1.0 +MOMENTS_SY_MIN F32 1.0 + +BACKGROUND.XBIN S32 400 # size of background superpixels +BACKGROUND.YBIN S32 400 # size of background superpixels +BACKGROUND.XSAMPLE F32 2.0 # size of background superpixels +BACKGROUND.YSAMPLE F32 2.0 # size of background superpixels +IMSTATS_NPIX S32 40000 # number of pixels to use for sky estimate boxes: Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/pswarp.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/pswarp.config (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/pswarp.config (revision 37065) @@ -0,0 +1,3 @@ +### Megacam recipe for pswarp + +ASTROM.SOURCE STR PSASTRO.OUTPUT # Source file rule for astrometry, or NULL Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/rejections.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/rejections.config (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/suprime/rejections.config (revision 37065) @@ -0,0 +1,38 @@ + +BIAS METADATA + FILTER STR * + EXPECTED F32 0.0 + IMFILE.MEAN F32 2.0 + IMFILE.STDEV F32 10.0 + IMFILE.MEANSTDEV F32 0.5 + IMFILE.SKEWNESS F32 0.0 + IMFILE.KURTOSIS F32 0.0 + IMFILE.SNR F32 0.0 + IMFILE.BIN.STDEV F32 0.5 + IMFILE.BIN.SNR F32 0.0 + IMFILE.FLUX F32 0.0 + EXP.MEAN F32 1.0 + EXP.STDEV F32 10.0 + EXP.MEANSTDEV F32 0.5 + EXP.SNR F32 0.0 + EXP.BIN.STDEV F32 0.0 + EXP.BIN.SNR F32 0.0 + EXP.FLUX F32 0.0 + ENSEMBLE.MEAN F32 3.0 + ENSEMBLE.STDEV F32 3.0 + ENSEMBLE.MEANSTDEV F32 0.0 +END + +# FILTER is an additional qualifier, and may be "*" (or absent!), in which case it matches everything +# EXPECTED is the expected mean value +# IMFILE.MEAN is the maximum permitted mean value for an imfile, relative to the standard deviation +# IMFILE.STDEV is the maximum permitted standard deviation for an imfile +# EXP.MEAN is the maximum permitted mean value for an exposure, relative to the standard deviation +# EXP.STDEV is the maximum permitted standard deviation for an exposure +# EXP.MEANSTDEV is the maximum permitted mean standard deviation for an exposure relative to the mean +# ENSEMBLE.MEAN is the maximum permitted mean for an ensemble of exposures +# ENSEMBLE.STDEV is the maximum permitted standard deviation for an ensemble of exposures +# ENSEMBLE.MEANSTDEV is the maximum permitted mean standard deviation for an ensemble of exposures +# IMFILE.SNR is the minimum permitted signal-to-noise for an imfile +# EXP.SNR is the minimum permitted signal-to-noise for an exposure +# These values (all except FILTER) may be zero, in which case no clipping is applied. Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/system.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/system.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/system.config (revision 37065) @@ -11,4 +11,5 @@ GPC1 STR gpc1/camera.config # Pan-STARRS GPC1 GPC1-TDI STR gpc1-tdi/camera.config # Pan-STARRS GPC1 with TDI guiding + TC3 STR tc3/camera.config # Pan-STARRS Test Camera III ESOWFI STR esowfi/camera.config # ESO Wide-Field Imager LBCRED STR lbc_red/camera.config # Large Binocular Camera Red @@ -18,4 +19,5 @@ VYSOS20 STR vysos20/camera.config # VYSOS 5in SSP STR ssp/camera.config # Pan-STARRS spectroscopic sky probe + SUPRIMECAM STR suprime/camera.config # Subaru Suprimecam SIMMOSAIC STR simmosaic/camera.config # Simulated mosaic, for testing SIMTEST STR simtest/camera.config # Simulation test camera @@ -26,5 +28,4 @@ # UCAM STR ucam/camera.config # LRIS_BLUE STR lris_blue/camera.config -# TC3 STR tc3/camera.config # Pan-STARRS Test Camera III # LRIS_RED STR lris_red/camera.config Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/tc3/Makefile.am =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/tc3/Makefile.am (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/tc3/Makefile.am (revision 37065) @@ -6,4 +6,5 @@ camera.config \ format.config \ + format_ps2.config \ ppImage.config Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/tc3/camera.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/tc3/camera.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/tc3/camera.config (revision 37065) @@ -4,4 +4,5 @@ FORMATS METADATA RAW STR tc3/format.config + PS2 STR tc3/format_ps2.config END @@ -16,4 +17,21 @@ CCID45-1-05A STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 CCID45-1-19A STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + + XY00 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY01 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY02 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY03 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY10 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY11 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY12 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY13 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY20 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY21 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY22 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY23 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY30 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY31 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY32 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 + XY33 STR xy00 xy01 xy02 xy03 xy04 xy05 xy06 xy07 xy10 xy11 xy12 xy13 xy14 xy15 xy16 xy17 xy20 xy21 xy22 xy23 xy24 xy25 xy26 xy27 xy30 xy31 xy32 xy33 xy34 xy35 xy36 xy37 xy40 xy41 xy42 xy43 xy44 xy45 xy46 xy47 xy50 xy51 xy52 xy53 xy54 xy55 xy56 xy57 xy60 xy61 xy62 xy63 xy64 xy65 xy66 xy67 xy70 xy71 xy72 xy73 xy74 xy75 xy76 xy77 END Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/tc3/format.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/tc3/format.config (revision 37064) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/tc3/format.config (revision 37065) @@ -6,4 +6,5 @@ ORIGIN STR PS1 CONTROLR STR STARGRASP + INSTRUME STR tc3 EXTEND BOOL T END Index: /branches/eam_branches/ipp-ops-20130712/ippconfig/tc3/format_ps2.config =================================================================== --- /branches/eam_branches/ipp-ops-20130712/ippconfig/tc3/format_ps2.config (revision 37065) +++ /branches/eam_branches/ipp-ops-20130712/ippconfig/tc3/format_ps2.config (revision 37065) @@ -0,0 +1,315 @@ +# Camera format configuration for Pan-STARRS Test Camera 3 + +# How to recognise this type +RULE METADATA +# IMAGESWV STR GPC DaqCom v2.05 (Mar 08 2007) + ORIGIN STR PS2 + CONTROLR STR STARGRASP + INSTRUME STR tc3 + EXTEND BOOL T +END + +FILE METADATA + # How to read this data + PHU STR CHIP # The FITS file represents a chip + EXTENSIONS STR CELL # The extensions represent cells + FPA.OBS STR OBSTYPE # A PHU keyword for unique identifier + CONTENT STR DETECTOR # How to determine content of FITS file + CONTENT.RULE STR {CHIP.NAME} # How to derive the CONTENT when writing +END + +# What's in the FITS file? +CONTENTS METADATA + # File identifier with corresponding file layout name + CCID58-1-09a2 STR XY00:CCD_10u + CCID58-1-18a1 STR XY01:CCD_10u + CCID58-2-18b2 STR XY02:CCD_10u + CCID58-2-16a2 STR XY03:CCD_10u + CCID58-2-17a2 STR XY10:CCD_10u + CCID58-2-16a1 STR XY11:CCD_10u + CCID58-2-10b2 STR XY12:CCD_10u + CCID58-1-12a1 STR XY13:CCD_10u + CCID58-2-07a2 STR XY20:CCD_10u + CCID58-2-07a1 STR XY21:CCD_10u + CCID58-1-06b2 STR XY22:CCD_10u + CCID58-2-14a1 STR XY23:CCD_10u + CCID58-1-13a1 STR XY30:CCD_10u + CCID58-3-14a2 STR XY31:CCD_10u + CCID58-1-04b2 STR XY32:CCD_10u + CCID58-1-14a2 STR XY33:CCD_10u +END + +# Specify the layout +CHIPS METADATA + CCD_10u METADATA + # Extension name, cellName:cellType + xy00 STR xy00:pitch10u + xy01 STR xy01:pitch10u + xy02 STR xy02:pitch10u + xy03 STR xy03:pitch10u + xy04 STR xy04:pitch10u + xy05 STR xy05:pitch10u + xy06 STR xy06:pitch10u + xy07 STR xy07:pitch10u + xy10 STR xy10:pitch10u + xy11 STR xy11:pitch10u + xy12 STR xy12:pitch10u + xy13 STR xy13:pitch10u + xy14 STR xy14:pitch10u + xy15 STR xy15:pitch10u + xy16 STR xy16:pitch10u + xy17 STR xy17:pitch10u + xy20 STR xy20:pitch10u + xy21 STR xy21:pitch10u + xy22 STR xy22:pitch10u + xy23 STR xy23:pitch10u + xy24 STR xy24:pitch10u + xy25 STR xy25:pitch10u + xy26 STR xy26:pitch10u + xy27 STR xy27:pitch10u + xy30 STR xy30:pitch10u + xy31 STR xy31:pitch10u + xy32 STR xy32:pitch10u + xy33 STR xy33:pitch10u + xy34 STR xy34:pitch10u + xy35 STR xy35:pitch10u + xy36 STR xy36:pitch10u + xy37 STR xy37:pitch10u + xy40 STR xy40:pitch10u + xy41 STR xy41:pitch10u + xy42 STR xy42:pitch10u + xy43 STR xy43:pitch10u + xy44 STR xy44:pitch10u + xy45 STR xy45:pitch10u + xy46 STR xy46:pitch10u + xy47 STR xy47:pitch10u + xy50 STR xy50:pitch10u + xy51 STR xy51:pitch10u + xy52 STR xy52:pitch10u + xy53 STR xy53:pitch10u + xy54 STR xy54:pitch10u + xy55 STR xy55:pitch10u + xy56 STR xy56:pitch10u + xy57 STR xy57:pitch10u + xy60 STR xy60:pitch10u + xy61 STR xy61:pitch10u + xy62 STR xy62:pitch10u + xy63 STR xy63:pitch10u + xy64 STR xy64:pitch10u + xy65 STR xy65:pitch10u + xy66 STR xy66:pitch10u + xy67 STR xy67:pitch10u + xy70 STR xy70:pitch10u + xy71 STR xy71:pitch10u + xy72 STR xy72:pitch10u + xy73 STR xy73:pitch10u + xy74 STR xy74:pitch10u + xy75 STR xy75:pitch10u + xy76 STR xy76:pitch10u + xy77 STR xy77:pitch10u + END +END + +# Specify the cell data +CELLS METADATA + pitch10u METADATA + CELL.BIASSEC.SOURCE STR HEADER + CELL.TRIMSEC.SOURCE STR HEADER + CELL.BIASSEC STR BIASSEC + CELL.TRIMSEC STR DATASEC + END +END + +# How to translate PS concepts into FITS headers +TRANSLATION METADATA + FPA.FILTERID STR FILTERID + FPA.FILTER STR FILTERID + FPA.RA STR RA + FPA.DEC STR DEC + FPA.RADECSYS STR EQUINOX + FPA.OBSTYPE STR OBSTYPE + FPA.OBJECT STR OBJECT + FPA.OBS.MODE STR OBS_MODE + FPA.COMMENT STR CMMTOBS + FPA.AIRMASS STR AIRMASS + FPA.POSANGLE STR POSANGLE + FPA.ROTANGLE STR ROT + FPA.FOCUS STR M2Z + FPA.TIME STR SHUTOUTC + FPA.EXPOSURE STR EXPREQ # Requested exposure time, presumably camera exposure time + FPA.ALT STR ALT + FPA.AZ STR AZ + FPA.TEMP STR DETTEM + FPA.M1X STR M1X + FPA.M1Y STR M1Y + FPA.M1Z STR M1Z + FPA.M1TIP STR M1TIP + FPA.M1TILT STR M1TILT + FPA.M2X STR M2X + FPA.M2Y STR M2Y + FPA.M2Z STR M2Z + FPA.M2TIP STR M2TIP + FPA.M2TILT STR M2TILT + FPA.ENV.TEMP STR ENVTEM + FPA.ENV.HUMID STR ENVHUM + FPA.ENV.WIND STR ENVWIN + FPA.ENV.DIR STR ENVDIR + FPA.PON.TIME STR PONTIME +# FPA.TELESCOPE STR TELESCOP -- hardwired for format +# FPA.INSTRUMENT STR INSTRUME -- hardwired for format +# FPA.DETECTOR STR DETECTOR -- hardwired for format + + FPA.TELTEMP.M1 STR TELTEMM1 # Primary mirror temps (C) + FPA.TELTEMP.M1CELL STR TELTEMMS # Primary mirror support temps (C) + FPA.TELTEMP.M2 STR TELTEMM2 # Secondary mirror temps (C + FPA.TELTEMP.SPIDER STR TELTEMSP # Spider temperatures (C) + FPA.TELTEMP.TRUSS STR TELTEMTR # Mid truss temperatures (C + FPA.TELTEMP.EXTRA STR TELTEMEX # Miscellaneous temperatures (C) + + FPA.BURNTOOL.APPLIED STR BTOOLAPP + + CHIP.ID STR DETECTOR + CELL.XBIN STR CCDSUM + CELL.YBIN STR CCDSUM + CELL.X0 STR IMNPIX1 + CELL.Y0 STR IMNPIX2 + CELL.XPARITY STR ATM1_1 + CELL.YPARITY STR ATM2_2 + CHIP.TEMP STR CDETTEM + CHIP.TEMPERATURE STR DETTEM + CHIP.VIDEOCELL STR CELLMODE + + CELL.EXPOSURE STR EXPTIME # Exposure time measured by shutter + CELL.DARKTIME STR DARKTIME # Exposure time for camera + CELL.TIME STR SHUTOUTC # Observation time + # XXX CELL.GAIN STR GAIN # Cell gain (e/ADU) + CELL.READNOISE STR RDNOISE # Cell read noise (ADU) + # XXX CELL.SATURATION STR MAXLIN # Saturation point (ADU) + +END + +# Default PS concepts that may be specified by value +DEFAULTS METADATA + FPA.TELESCOPE STR PS2 + FPA.INSTRUMENT STR TC3 + FPA.LONGITUDE STR 10:25:01.417 # West Longitude in Hours 10.4170608521 XXX need to fix... + FPA.LATITUDE STR 20:42:25.558 # North Latitude in Degrees 20.7070999146 XXX need to fix... + FPA.ELEVATION F32 3048.0 # altitude in meters XXX need to fix... + FPA.DETECTOR STR TC3 + FPA.TIMESYS STR UTC + + CHIP.XSIZE S32 4846 + CHIP.YSIZE S32 4868 + CHIP.XPARITY S32 1 + CHIP.YPARITY S32 1 + + CELL.TIMESYS STR UTC + CELL.READDIR S32 1 # Cell is read in x direction + CELL.BAD S32 0 + + # XXX these should come from the header, but not for now + CELL.GAIN F32 1.0 # Cell gain (e/ADU) + CELL.SATURATION F32 40000 # Saturation point (ADU) + + ### How to get FPA coordinates from chip coordinates + CHIP.X0.DEPEND STR CHIP.NAME + CHIP.X0 METADATA + XY00 S32 4971 + XY01 S32 4971 + XY02 S32 4971 + XY03 S32 4971 + XY10 S32 9942 + XY11 S32 9942 + XY12 S32 9942 + XY13 S32 9942 + XY20 S32 14913 + XY21 S32 14913 + XY22 S32 14913 + XY23 S32 14913 + XY30 S32 19884 + XY31 S32 19884 + XY32 S32 19884 + XY33 S32 19884 + END + CHIP.Y0.DEPEND STR CHIP.NAME + CHIP.Y0 METADATA + XY00 S32 5143 + XY01 S32 10286 + XY02 S32 15429 + XY03 S32 20572 + XY10 S32 5143 + XY11 S32 10286 + XY12 S32 15429 + XY13 S32 20572 + XY20 S32 5143 + XY21 S32 10286 + XY22 S32 15429 + XY23 S32 20572 + XY30 S32 5143 + XY31 S32 10286 + XY32 S32 15429 + XY33 S32 20572 + END + CHIP.XPARITY.DEPEND STR CHIP.NAME + CHIP.XPARITY METADATA + XY00 S32 -1 + XY01 S32 -1 + XY02 S32 -1 + XY03 S32 -1 + XY10 S32 -1 + XY11 S32 -1 + XY12 S32 -1 + XY13 S32 -1 + XY20 S32 -1 + XY21 S32 -1 + XY22 S32 -1 + XY23 S32 -1 + XY30 S32 -1 + XY31 S32 -1 + XY32 S32 -1 + XY33 S32 -1 + END + CHIP.YPARITY.DEPEND STR CHIP.NAME + CHIP.YPARITY METADATA + XY00 S32 -1 + XY01 S32 -1 + XY02 S32 -1 + XY03 S32 -1 + XY10 S32 -1 + XY11 S32 -1 + XY12 S32 -1 + XY13 S32 -1 + XY20 S32 -1 + XY21 S32 -1 + XY22 S32 -1 + XY23 S32 -1 + XY30 S32 -1 + XY31 S32 -1 + XY32 S32 -1 + XY33 S32 -1 + END +END + +# How to translation PS concepts into database lookups +DATABASE METADATA + TYPE dbEntry TABLE COLUMN GIVENDBCOL GIVENPS +# CELL.GAIN dbEntry Camera gain chipId,cellId CHIP.NAME,CELL.NAME +# CELL.READNOISE dbEntry Camera readNoise chipId,cellId CHIP.NAME,CELL.NAME + +# A database entry refers to a particular column (COLUMN) in a +# particular table (TABLE), given certain PS concepts (GIVENPS) that +# match certain database columns (GIVENDBCOL). +END + +# Where there might be some ambiguity, specify the format +FORMATS METADATA + FPA.RA STR HOURS + FPA.DEC STR DEGREES + FPA.LONGITUDE STR HOURS + FPA.LATITUDE STR DEGREES + FPA.TIME STR MJD + CELL.TIME STR MJD + CELL.BINNING STR TOGETHER + CELL.READNOISE STR ADU +END +