Index: /branches/eam_branches/ipp-20140717/ippToPsps/config/tables.ST.vot
===================================================================
--- /branches/eam_branches/ipp-20140717/ippToPsps/config/tables.ST.vot	(revision 37160)
+++ /branches/eam_branches/ipp-20140717/ippToPsps/config/tables.ST.vot	(revision 37161)
@@ -1861,44 +1861,44 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="gexpRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="gExpRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>Exponential fit radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="gexpRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="gExpRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in Exponential fit radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="gexpFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>Exponential fit flux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gexpFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in expFlux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gexpAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="gExpMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>Exponential fit mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gExpMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in expMag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gExpAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="gexpAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="gExpAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Exponential fit axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="gexpPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="gExpPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated phi of Exponential axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="gexpPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="gExpPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated error of phi of Exponential axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="graExpOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in RA of Exponential fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gdecExpOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in DEC of Exponential fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="graExpOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in raExpOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gdecExpOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in decExpOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gexpCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="gExpRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of Exponential fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gExpDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of Exponential fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gExpRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in ExpRa</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gExpDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in ExpDec</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gExpCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit coverage factor</DESCRIPTION>
       </FIELD>
-      <FIELD name="gexpLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="gExpLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit likelihood factor</DESCRIPTION>
       </FIELD>
@@ -1914,44 +1914,44 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="rexpRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="rExpRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>Exponential fit radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="rexpRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="rExpRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in Exponential fit radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="rexpFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>Exponential fit flux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rexpFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in expFlux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rexpAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="rExpMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>Exponential fit mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rExpMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in ExpMag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rExpAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="rexpAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="rExpAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Exponential fit axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="rexpPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="rExpPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated phi of Exponential axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="rexpPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="rExpPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated error of phi of Exponential axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="rraExpOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in RA of Exponential fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rdecExpOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in DEC of Exponential fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rraExpOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in raExpOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rdecExpOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in decExpOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rexpCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="rExpRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of Exponential fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rExpDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of Exponential fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rExpRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in ExpRa</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rExpDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in ExpDec</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rExpCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit coverage factor</DESCRIPTION>
       </FIELD>
-      <FIELD name="rexpLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="rExpLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit likelihood factor</DESCRIPTION>
       </FIELD>
@@ -1967,44 +1967,44 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="iexpRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="iExpRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>Exponential fit radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="iexpRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="iExpRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in Exponential fit radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="iexpFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>Exponential fit flux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="iexpFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in expFlux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="iexpAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="iExpMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>Exponential fit mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iExpMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in ExpMag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iExpAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="iexpAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="iExpAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Exponential fit axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="iexpPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="iExpPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated phi of Exponential axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="iexpPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="iExpPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated error of phi of Exponential axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="iraExpOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in RA of Exponential fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="idecExpOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in DEC of Exponential fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="iraExpOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in raExpOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="idecExpOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in decExpOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="iexpCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="iExpRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of Exponential fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iExpDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of Exponential fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iExpRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in ExpRa</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iExpDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in ExpDec</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iExpCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit coverage factor</DESCRIPTION>
       </FIELD>
-      <FIELD name="iexpLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="iExpLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit likelihood factor</DESCRIPTION>
       </FIELD>
@@ -2020,44 +2020,44 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="zexpRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="zExpRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>Exponential fit radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="zexpRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="zExpRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in Exponential fit radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="zexpFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>Exponential fit flux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zexpFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in expFlux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zexpAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="zExpMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>Exponential fit mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zExpMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in ExpMag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zExpAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="zexpAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="zExpAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Exponential fit axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="zexpPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="zExpPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated phi of Exponential axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="zexpPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="zExpPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated error of phi of Exponential axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="zraExpOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in RA of Exponential fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zdecExpOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in DEC of Exponential fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zraExpOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in raExpOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zdecExpOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in decExpOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zexpCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="zExpRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of Exponential fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zExpDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of Exponential fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zExpRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in ExpRa</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zExpDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in ExpDec</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zExpCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit coverage factor</DESCRIPTION>
       </FIELD>
-      <FIELD name="zexpLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="zExpLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit likelihood factor</DESCRIPTION>
       </FIELD>
@@ -2073,44 +2073,44 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="yexpRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="yExpRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>Exponential fit radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="yexpRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="yExpRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in Exponential fit radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="yexpFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>Exponential fit flux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="yexpFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in expFlux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="yexpAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="yExpMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>Exponential fit mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yExpMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in ExpMag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yExpAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="yexpAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="yExpAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Exponential fit axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="yexpPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="yExpPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated phi of Exponential axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="yexpPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="yExpPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated error of phi of Exponential axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="yraExpOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in RA of Exponential fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ydecExpOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in DEC of Exponential fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="yraExpOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in raExpOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ydecExpOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in decExpOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="yexpCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="yExpRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of Exponential fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yExpDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of Exponential fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yExpRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in ExpRa</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yExpDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in ExpDec</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yExpCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit coverage factor</DESCRIPTION>
       </FIELD>
-      <FIELD name="yexpLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="yExpLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Exponential fit likelihood factor</DESCRIPTION>
       </FIELD>
@@ -2169,45 +2169,45 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="gdeVRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>deVaucouleurs radius</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gdeVRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>estimated error in deVaucouleurs radius</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gdeVFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>deVaucouleurs magntiude</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gdeVFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in deV_mag</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gdeVAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucoulerus axis ratio</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gdeVAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in deVaucoulerus axis ratio</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gdeVPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
-        <DESCRIPTION>estmated phi of deVaucouleurs axis</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gdeVPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
-        <DESCRIPTION>estmated error of phi of deVaucouleurs axis</DESCRIPTION>
-      </FIELD>
-      <FIELD name="graDeVOff" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>Offset in RA of deVaucouleurs fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gdecDeVOff" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>Offset in DEC of deVaucouleurs fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="graDeVOffErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="gDeVRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>DeVaucouleurs radius</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gDeVRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in DeVaucouleurs radius</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gDeVMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>DeVaucouleurs magntiude</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gDeVMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in DeV_mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gDeVAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucoulerus axis ratio</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gDeVAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>estimated error in DeVaucoulerus axis ratio</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gDeVPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+        <DESCRIPTION>estmated phi of DeVaucouleurs axis</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gDeVPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+        <DESCRIPTION>estmated error of phi of DeVaucouleurs axis</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gDeVRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of DeVaucouleurs fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gDeVDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of DeVaucouleurs fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gDeVRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in ra offset</DESCRIPTION>
       </FIELD>
-      <FIELD name="gdecDeVOffErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="gDeVDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in dec offset</DESCRIPTION>
       </FIELD>
-      <FIELD name="gdeVCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucouleurs fit coverage factor</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gdeVLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucouleurs fit likelihood factor</DESCRIPTION>
+      <FIELD name="gDeVCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucouleurs fit coverage factor</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gDeVLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucouleurs fit likelihood factor</DESCRIPTION>
       </FIELD>
 
@@ -2222,45 +2222,45 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="rdeVRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>deVaucouleurs radius</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rdeVRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>estimated error in deVaucouleurs radius</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rdeVFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>deVaucouleurs magntiude</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rdeVFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in deV_mag</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rdeVAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucoulerus axis ratio</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rdeVAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in deVaucoulerus axis ratio</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rdeVPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
-        <DESCRIPTION>estmated phi of deVaucouleurs axis</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rdeVPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
-        <DESCRIPTION>estmated error of phi of deVaucouleurs axis</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rraDeVOff" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>Offset in RA of deVaucouleurs fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rdecDeVOff" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>Offset in DEC of deVaucouleurs fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rraDeVOffErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="rDeVRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>DeVaucouleurs radius</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rDeVRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in DeVaucouleurs radius</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rDeVMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>DeVaucouleurs magntiude</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rDeVMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in DeV_mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rDeVAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucoulerus axis ratio</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rDeVAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>estimated error in DeVaucoulerus axis ratio</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rDeVPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+        <DESCRIPTION>estmated phi of DeVaucouleurs axis</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rDeVPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+        <DESCRIPTION>estmated error of phi of DeVaucouleurs axis</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rDeVRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of DeVaucouleurs fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rDeVDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of DeVaucouleurs fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rDeVRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in ra offset</DESCRIPTION>
       </FIELD>
-      <FIELD name="rdecDeVOffErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="rDeVDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in dec offset</DESCRIPTION>
       </FIELD>
-      <FIELD name="rdeVCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucouleurs fit coverage factor</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rdeVLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucouleurs fit likelihood factor</DESCRIPTION>
+      <FIELD name="rDeVCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucouleurs fit coverage factor</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rDeVLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucouleurs fit likelihood factor</DESCRIPTION>
       </FIELD>
 
@@ -2275,45 +2275,45 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="ideVRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>deVaucouleurs radius</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ideVRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>estimated error in deVaucouleurs radius</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ideVFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>deVaucouleurs magntiude</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ideVFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in deV_mag</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ideVAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucoulerus axis ratio</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ideVAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in deVaucoulerus axis ratio</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ideVPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
-        <DESCRIPTION>estmated phi of deVaucouleurs axis</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ideVPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
-        <DESCRIPTION>estmated error of phi of deVaucouleurs axis</DESCRIPTION>
-      </FIELD>
-      <FIELD name="iraDeVOff" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>Offset in RA of deVaucouleurs fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="idecDeVOff" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>Offset in DEC of deVaucouleurs fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="iraDeVOffErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="iDeVRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>DeVaucouleurs radius</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iDeVRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in DeVaucouleurs radius</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iDeVMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>DeVaucouleurs magntiude</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iDeVMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in DeV_mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iDeVAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucoulerus axis ratio</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iDeVAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>estimated error in DeVaucoulerus axis ratio</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iDeVPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+        <DESCRIPTION>estmated phi of DeVaucouleurs axis</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iDeVPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+        <DESCRIPTION>estmated error of phi of DeVaucouleurs axis</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iDeVRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of DeVaucouleurs fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iDeVDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of DeVaucouleurs fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iDeVRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in ra offset</DESCRIPTION>
       </FIELD>
-      <FIELD name="idecDeVOffErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="iDeVDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in dec offset</DESCRIPTION>
       </FIELD>
-      <FIELD name="ideVCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucouleurs fit coverage factor</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ideVLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucouleurs fit likelihood factor</DESCRIPTION>
+      <FIELD name="iDeVCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucouleurs fit coverage factor</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iDeVLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucouleurs fit likelihood factor</DESCRIPTION>
       </FIELD>
 
@@ -2328,45 +2328,45 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="zdeVRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>deVaucouleurs radius</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zdeVRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>estimated error in deVaucouleurs radius</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zdeVFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>deVaucouleurs magntiude</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zdeVFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in deV_mag</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zdeVAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucoulerus axis ratio</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zdeVAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in deVaucoulerus axis ratio</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zdeVPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
-        <DESCRIPTION>estmated phi of deVaucouleurs axis</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zdeVPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
-        <DESCRIPTION>estmated error of phi of deVaucouleurs axis</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zraDeVOff" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>Offset in RA of deVaucouleurs fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zdecDeVOff" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>Offset in DEC of deVaucouleurs fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zraDeVOffErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="zDeVRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>DeVaucouleurs radius</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zDeVRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in DeVaucouleurs radius</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zDeVMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>DeVaucouleurs magntiude</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zDeVMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in DeV_mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zDeVAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucoulerus axis ratio</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zDeVAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>estimated error in DeVaucoulerus axis ratio</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zDeVPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+        <DESCRIPTION>estmated phi of DeVaucouleurs axis</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zDeVPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+        <DESCRIPTION>estmated error of phi of DeVaucouleurs axis</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zDeVRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of DeVaucouleurs fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zDeVDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of DeVaucouleurs fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zDeVRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in ra offset</DESCRIPTION>
       </FIELD>
-      <FIELD name="zdecDeVOffErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="zDeVDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in dec offset</DESCRIPTION>
       </FIELD>
-      <FIELD name="zdeVCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucouleurs fit coverage factor</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zdeVLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucouleurs fit likelihood factor</DESCRIPTION>
+      <FIELD name="zDeVCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucouleurs fit coverage factor</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zDeVLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucouleurs fit likelihood factor</DESCRIPTION>
       </FIELD>
 
@@ -2381,45 +2381,45 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="ydeVRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>deVaucouleurs radius</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ydeVRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>estimated error in deVaucouleurs radius</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ydeVFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>deVaucouleurs magntiude</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ydeVFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in deV_mag</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ydeVAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucoulerus axis ratio</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ydeVAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in deVaucoulerus axis ratio</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ydeVPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
-        <DESCRIPTION>estmated phi of deVaucouleurs axis</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ydeVPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
-        <DESCRIPTION>estmated error of phi of deVaucouleurs axis</DESCRIPTION>
-      </FIELD>
-      <FIELD name="yraDeVOff" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>Offset in RA of deVaucouleurs fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ydecDeVOff" arraysize="1" datatype="float" unit="arcsec" default="-999">
-        <DESCRIPTION>Offset in DEC of deVaucouleurs fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="yraDeVOffErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="yDeVRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>DeVaucouleurs radius</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yDeVRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in DeVaucouleurs radius</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yDeVMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>DeVaucouleurs magntiude</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yDeVMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in DeV_mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yDeVAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucoulerus axis ratio</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yDeVAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>estimated error in DeVaucoulerus axis ratio</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yDeVPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+        <DESCRIPTION>estmated phi of DeVaucouleurs axis</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yDeVPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+        <DESCRIPTION>estmated error of phi of DeVaucouleurs axis</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yDeVRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of DeVaucouleurs fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yDeVDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of DeVaucouleurs fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yDeVRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in ra offset</DESCRIPTION>
       </FIELD>
-      <FIELD name="ydecDeVOffErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="yDeVDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in dec offset</DESCRIPTION>
       </FIELD>
-      <FIELD name="ydeVCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucouleurs fit coverage factor</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ydeVLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>deVaucouleurs fit likelihood factor</DESCRIPTION>
+      <FIELD name="yDeVCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucouleurs fit coverage factor</DESCRIPTION>
+      </FIELD>
+      <FIELD name="yDeVLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+        <DESCRIPTION>DeVaucouleurs fit likelihood factor</DESCRIPTION>
       </FIELD>
 
@@ -2477,50 +2477,50 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="gserRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="gSerRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>Sersic radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="gserRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="gSerRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in Sersic radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="gserFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>Sersic Flux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gserFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in serFlux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gserAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="gSerMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>Sersic Mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gSerMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in SerMag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gSerAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="gserAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="gSerAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Sersic axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="gserNu" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="gSerNu" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic index</DESCRIPTION>
       </FIELD>
-      <FIELD name="gserNuErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="gSerNuErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Sersic index</DESCRIPTION>
       </FIELD>
-      <FIELD name="gserPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="gSerPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated phi of Sersic axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="gserPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="gSerPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated error of phi of Sersic axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="graSerOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in RA of Sersic fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gdecSerOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in DEC of Sersic fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="graSerOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in raSerOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gdecSerOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in decSerOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="gserCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="gSerRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of Sersic fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gSerDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of Sersic fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gSerRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in SerRa</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gSerDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in SerDec</DESCRIPTION>
+      </FIELD>
+      <FIELD name="gSerCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic fit coverage factor</DESCRIPTION>
       </FIELD>
-      <FIELD name="gserLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="gSerLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic fit likelihood factor</DESCRIPTION>
       </FIELD>
@@ -2536,50 +2536,50 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="rserRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="rSerRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>Sersic radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="rserRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="rSerRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in Sersic radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="rserFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>Sersic Flux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rserFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in serFlux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rserAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="rSerMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>Sersic Mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rSerMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in SerMag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rSerAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="rserAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="rSerAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Sersic axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="rserNu" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="rSerNu" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic index</DESCRIPTION>
       </FIELD>
-      <FIELD name="rserNuErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="rSerNuErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Sersic index</DESCRIPTION>
       </FIELD>
-      <FIELD name="rserPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="rSerPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated phi of Sersic axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="rserPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="rSerPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated error of phi of Sersic axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="rraSerOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in RA of Sersic fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rdecSerOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in DEC of Sersic fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rraSerOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in raSerOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rdecSerOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in decSerOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="rserCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="rSerRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of Sersic fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rSerDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of Sersic fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rSerRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in SerRa</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rSerDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in SerDec</DESCRIPTION>
+      </FIELD>
+      <FIELD name="rSerCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic fit coverage factor</DESCRIPTION>
       </FIELD>
-      <FIELD name="rserLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="rSerLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic fit likelihood factor</DESCRIPTION>
       </FIELD>
@@ -2595,50 +2595,50 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="iserRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="iSerRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>Sersic radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="iserRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="iSerRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in Sersic radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="iserFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>Sersic Flux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="iserFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in serFlux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="iserAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="iSerMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>Sersic Mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iSerMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in SerMag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iSerAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="iserAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="iSerAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Sersic axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="iserNu" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="iSerNu" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic index</DESCRIPTION>
       </FIELD>
-      <FIELD name="iserNuErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="iSerNuErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Sersic index</DESCRIPTION>
       </FIELD>
-      <FIELD name="iserPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="iSerPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated phi of Sersic axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="iserPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="iSerPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated error of phi of Sersic axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="iraSerOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in RA of Sersic fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="idecSerOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in DEC of Sersic fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="iraSerOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in raSerOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="idecSerOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in decSerOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="iserCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="iSerRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of Sersic fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iSerDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of Sersic fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iSerRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in SerRa</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iSerDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in SerDec</DESCRIPTION>
+      </FIELD>
+      <FIELD name="iSerCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic fit coverage factor</DESCRIPTION>
       </FIELD>
-      <FIELD name="iserLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="iSerLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic fit likelihood factor</DESCRIPTION>
       </FIELD>
@@ -2654,50 +2654,50 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="zserRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="zSerRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>Sersic radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="zserRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="zSerRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in Sersic radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="zserFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>Sersic Flux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zserFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in serFlux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zserAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="zSerMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>Sersic Mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zSerMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in SerMag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zSerAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="zserAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="zSerAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Sersic axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="zserNu" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="zSerNu" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic index</DESCRIPTION>
       </FIELD>
-      <FIELD name="zserNuErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="zSerNuErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Sersic index</DESCRIPTION>
       </FIELD>
-      <FIELD name="zserPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="zSerPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated phi of Sersic axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="zserPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="zSerPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated error of phi of Sersic axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="zraSerOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in RA of Sersic fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zdecSerOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in DEC of Sersic fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zraSerOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in raSerOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zdecSerOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in decSerOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="zserCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="zSerRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of Sersic fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zSerDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of Sersic fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zSerRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in SerRa</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zSerDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in SerDec</DESCRIPTION>
+      </FIELD>
+      <FIELD name="zSerCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic fit coverage factor</DESCRIPTION>
       </FIELD>
-      <FIELD name="zserLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="zSerLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic fit likelihood factor</DESCRIPTION>
       </FIELD>
@@ -2713,50 +2713,50 @@
         <DESCRIPTION>stack identifier</DESCRIPTION>
       </FIELD>
-      <FIELD name="yserRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="ySerRadius" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>Sersic radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="yserRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+      <FIELD name="ySerRadiusErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
         <DESCRIPTION>estimated error in Sersic radius</DESCRIPTION>
       </FIELD>
-      <FIELD name="yserFlux" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>Sersic Flux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="yserFluxErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
-        <DESCRIPTION>estimated error in serFlux</DESCRIPTION>
-      </FIELD>
-      <FIELD name="yserAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="ySerMag" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>Sersic Mag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="ySerMagErr" arraysize="1" datatype="float" unit="adu/seconds" default="-999">
+        <DESCRIPTION>estimated error in SerMag</DESCRIPTION>
+      </FIELD>
+      <FIELD name="ySerAb" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="yserAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="ySerAbErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Sersic axis ratio</DESCRIPTION>
       </FIELD>
-      <FIELD name="yserNu" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="ySerNu" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic index</DESCRIPTION>
       </FIELD>
-      <FIELD name="yserNuErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="ySerNuErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>estimated error in Sersic index</DESCRIPTION>
       </FIELD>
-      <FIELD name="yserPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="ySerPhi" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated phi of Sersic axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="yserPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
+      <FIELD name="ySerPhiErr" arraysize="1" datatype="float" unit="degrees" default="-999">
         <DESCRIPTION>estmated error of phi of Sersic axis</DESCRIPTION>
       </FIELD>
-      <FIELD name="yraSerOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in RA of Sersic fit from PSF RA</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ydecSerOff" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>Offset in DEC of Sersic fit from PSF DEC</DESCRIPTION>
-      </FIELD>
-      <FIELD name="yraSerOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in raSerOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="ydecSerOffErr" arraysize="1" datatype="float" unit="dimensionless" default="-999">
-        <DESCRIPTION>estimated error in decSerOff</DESCRIPTION>
-      </FIELD>
-      <FIELD name="yserCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="ySerRa" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>RA of Sersic fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="ySerDec" arraysize="1" datatype="double" unit="degrees" default="-999">
+        <DESCRIPTION>DEC of Sersic fit</DESCRIPTION>
+      </FIELD>
+      <FIELD name="ySerRaErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in SerRa</DESCRIPTION>
+      </FIELD>
+      <FIELD name="ySerDecErr" arraysize="1" datatype="float" unit="arcsec" default="-999">
+        <DESCRIPTION>estimated error in SerDec</DESCRIPTION>
+      </FIELD>
+      <FIELD name="ySerCf" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic fit coverage factor</DESCRIPTION>
       </FIELD>
-      <FIELD name="yserLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
+      <FIELD name="ySerLikelihood" arraysize="1" datatype="float" unit="dimensionless" default="-999">
         <DESCRIPTION>Sersic fit likelihood factor</DESCRIPTION>
       </FIELD>