Index: trunk/tools/eam/reprocess/SAS.2014/00_chips.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.2014/00_chips.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.2014/00_chips.cmd (revision 40818) @@ -0,0 +1,33 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 00_chips.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -obs_mode SAS2" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_end_stage warp" +set common_opts = "$common_opts -set_tess_id RINGS.V3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -simple -set_dist_group SAS" + +set common_opts = "$common_opts -dateobs_begin 2011-07-03T00:00:00" +set common_opts = "$common_opts -dateobs_end 2011-07-06T23:59:59" + +chiptool $pretend $common_opts -filter g.00000 +chiptool $pretend $common_opts -filter i.00000 +chiptool $pretend $common_opts -filter r.00000 +chiptool $pretend $common_opts -filter y.00000 +chiptool $pretend $common_opts -filter z.00000 Index: trunk/tools/eam/reprocess/SAS.2014/01_stacks.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.2014/01_stacks.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.2014/01_stacks.cmd (revision 40818) @@ -0,0 +1,32 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 01_stacks.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" +set common_opts = "$common_opts -min_num 4" + +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" + +set common_opts = "$common_opts -set_reduction THREEPI_STACK_1DG" + +stacktool $pretend $common_opts -select_filter g.00000 +stacktool $pretend $common_opts -select_filter r.00000 +stacktool $pretend $common_opts -select_filter i.00000 +stacktool $pretend $common_opts -select_filter z.00000 +stacktool $pretend $common_opts -select_filter y.00000 Index: trunk/tools/eam/reprocess/SAS.2014/02_ssky.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.2014/02_ssky.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.2014/02_ssky.cmd (revision 40818) @@ -0,0 +1,58 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 02_ssky.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -ra_min 320" +set common_opts = "$common_opts -ra_max 340" +set common_opts = "$common_opts -simple" + +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 +staticskytool $pretend $common_opts -select_filter r.00000 +staticskytool $pretend $common_opts -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter y.00000 Index: trunk/tools/eam/reprocess/SAS.2014/03_skycal.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.2014/03_skycal.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.2014/03_skycal.cmd (revision 40818) @@ -0,0 +1,26 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 03_skycal.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -defineskycalrun" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -simple" + +staticskytool $pretend $common_opts Index: trunk/tools/eam/reprocess/SAS.2014/04_dist.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.2014/04_dist.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.2014/04_dist.cmd (revision 40818) @@ -0,0 +1,17 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 04_dist.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "--pretend" +endif + +set today = `date +%Y%m%d` + +dist_defineruns.pl --verbose --no_magic --dbname gpc1 $pretend --label $label --workdir neb://@HOST@.0/gpc1/dist/$label/$today Index: trunk/tools/eam/reprocess/SAS.2014/05_fforce.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.2014/05_fforce.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.2014/05_fforce.cmd (revision 40818) @@ -0,0 +1,29 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 03_skycal.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -select_warp_label $label" +set common_opts = "$common_opts -select_skycal_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_good_frac_min 0.05" + +set common_opts = "$common_opts -simple" + +fftool $pretend $common_opts Index: trunk/tools/eam/reprocess/SAS.2014/06_diff.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.2014/06_diff.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.2014/06_diff.cmd (revision 40818) @@ -0,0 +1,31 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 06_diff.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definewarpstack" +set common_opts = "$common_opts -available" +set common_opts = "$common_opts -set_reduction WARPSTACK" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -warp_label $label" +set common_opts = "$common_opts -stack_label LAP.ThreePi.20120706" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" +set common_opts = "$common_opts -good_frac 0.2" +set common_opts = "$common_opts -simple" + +echo $common_opts + +difftool $pretend $common_opts Index: trunk/tools/eam/reprocess/SAS.2014/dist.txt =================================================================== --- trunk/tools/eam/reprocess/SAS.2014/dist.txt (revision 40818) +++ trunk/tools/eam/reprocess/SAS.2014/dist.txt (revision 40818) @@ -0,0 +1,24 @@ + +SELECT DISTINCT + 'chip' as stage, + chipRun.chip_id as stage_id, + chipRun.magicked, + rawExp.exp_name as run_tag, + chipRun.label, + chipRun.data_group, + chipRun.dist_group, + distTarget.target_id, + distTarget.clean +FROM chipRun +JOIN rawExp USING(exp_id) +JOIN distTarget ON distTarget.stage = 'chip' + AND chipRun.dist_group = distTarget.dist_group + AND rawExp.filter = distTarget.filter +JOIN rcInterest USING(target_id) +LEFT JOIN distRun ON distRun.stage_id = chipRun.chip_id + AND distRun.target_id = distTarget.target_id +WHERE distTarget.state = 'enabled' + AND rcInterest.state = 'enabled' + AND rcInterest.state = 'enabled' + AND ((chipRun.state = 'full') OR (distTarget.clean AND chipRun.state = 'cleaned')) + AND (chipRun.label = 'SAS.20140614.pv3cr') AND (distRun.dist_id IS NULL) Index: trunk/tools/eam/reprocess/SAS.40/00_chips.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.40/00_chips.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.40/00_chips.cmd (revision 40818) @@ -0,0 +1,33 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 00_chips.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -obs_mode SAS2" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_end_stage warp" +set common_opts = "$common_opts -set_tess_id RINGS.V3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -simple -set_dist_group SAS" + +set common_opts = "$common_opts -dateobs_begin 2011-07-03T00:00:00" +set common_opts = "$common_opts -dateobs_end 2011-07-06T23:59:59" + +chiptool $pretend $common_opts -filter g.00000 +chiptool $pretend $common_opts -filter i.00000 +chiptool $pretend $common_opts -filter r.00000 +chiptool $pretend $common_opts -filter y.00000 +chiptool $pretend $common_opts -filter z.00000 Index: trunk/tools/eam/reprocess/SAS.40/01_stacks.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.40/01_stacks.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.40/01_stacks.cmd (revision 40818) @@ -0,0 +1,32 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 01_stacks.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" +set common_opts = "$common_opts -min_num 4" + +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" + +set common_opts = "$common_opts -set_reduction THREEPI_STACK_1DG" + +stacktool $pretend $common_opts -select_filter g.00000 +stacktool $pretend $common_opts -select_filter r.00000 +stacktool $pretend $common_opts -select_filter i.00000 +stacktool $pretend $common_opts -select_filter z.00000 +stacktool $pretend $common_opts -select_filter y.00000 Index: trunk/tools/eam/reprocess/SAS.40/02_ssky.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.40/02_ssky.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.40/02_ssky.cmd (revision 40818) @@ -0,0 +1,58 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 02_ssky.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -ra_min 320" +set common_opts = "$common_opts -ra_max 340" +set common_opts = "$common_opts -simple" + +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 +staticskytool $pretend $common_opts -select_filter r.00000 +staticskytool $pretend $common_opts -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter y.00000 Index: trunk/tools/eam/reprocess/SAS.40/03_skycal.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.40/03_skycal.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.40/03_skycal.cmd (revision 40818) @@ -0,0 +1,26 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 03_skycal.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -defineskycalrun" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -simple" + +staticskytool $pretend $common_opts Index: trunk/tools/eam/reprocess/SAS.40/04_dist.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.40/04_dist.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.40/04_dist.cmd (revision 40818) @@ -0,0 +1,17 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 04_dist.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "--pretend" +endif + +set today = `date +%Y%m%d` + +dist_defineruns.pl --verbose --no_magic --dbname gpc1 $pretend --label $label --workdir neb://@HOST@.0/gpc1/dist/$label/$today Index: trunk/tools/eam/reprocess/SAS.40/05_fforce.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.40/05_fforce.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.40/05_fforce.cmd (revision 40818) @@ -0,0 +1,29 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 03_skycal.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -select_warp_label $label" +set common_opts = "$common_opts -select_skycal_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_good_frac_min 0.05" + +set common_opts = "$common_opts -simple" + +fftool $pretend $common_opts Index: trunk/tools/eam/reprocess/SAS.40/06_diff.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.40/06_diff.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.40/06_diff.cmd (revision 40818) @@ -0,0 +1,31 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 06_diff.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definewarpstack" +set common_opts = "$common_opts -available" +set common_opts = "$common_opts -set_reduction WARPSTACK" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -warp_label $label" +set common_opts = "$common_opts -stack_label LAP.ThreePi.20120706" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" +set common_opts = "$common_opts -good_frac 0.2" +set common_opts = "$common_opts -simple" + +echo $common_opts + +difftool $pretend $common_opts Index: trunk/tools/eam/reprocess/SAS.40/06_diff2.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.40/06_diff2.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.40/06_diff2.cmd (revision 40818) @@ -0,0 +1,31 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 06_diff.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definewarpstack" +set common_opts = "$common_opts -available" +set common_opts = "$common_opts -set_reduction WARPSTACK_PV3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -warp_label SAS.20151104" +set common_opts = "$common_opts -stack_label LAP.PV3.20140730.final" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" +set common_opts = "$common_opts -good_frac 0.2" +set common_opts = "$common_opts -simple" + +echo $common_opts + +difftool $pretend $common_opts Index: trunk/tools/eam/reprocess/SAS.40/dist.txt =================================================================== --- trunk/tools/eam/reprocess/SAS.40/dist.txt (revision 40818) +++ trunk/tools/eam/reprocess/SAS.40/dist.txt (revision 40818) @@ -0,0 +1,24 @@ + +SELECT DISTINCT + 'chip' as stage, + chipRun.chip_id as stage_id, + chipRun.magicked, + rawExp.exp_name as run_tag, + chipRun.label, + chipRun.data_group, + chipRun.dist_group, + distTarget.target_id, + distTarget.clean +FROM chipRun +JOIN rawExp USING(exp_id) +JOIN distTarget ON distTarget.stage = 'chip' + AND chipRun.dist_group = distTarget.dist_group + AND rawExp.filter = distTarget.filter +JOIN rcInterest USING(target_id) +LEFT JOIN distRun ON distRun.stage_id = chipRun.chip_id + AND distRun.target_id = distTarget.target_id +WHERE distTarget.state = 'enabled' + AND rcInterest.state = 'enabled' + AND rcInterest.state = 'enabled' + AND ((chipRun.state = 'full') OR (distTarget.clean AND chipRun.state = 'cleaned')) + AND (chipRun.label = 'SAS.20140614.pv3cr') AND (distRun.dist_id IS NULL) Index: trunk/tools/eam/reprocess/SAS.41/00_chips.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.41/00_chips.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.41/00_chips.cmd (revision 40818) @@ -0,0 +1,35 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 00_chips.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -obs_mode SAS2" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_end_stage warp" +set common_opts = "$common_opts -set_tess_id RINGS.V3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -simple -set_dist_group SAS" + +set common_opts = "$common_opts -dateobs_begin 2011-07-03T00:00:00" +set common_opts = "$common_opts -dateobs_end 2011-07-06T23:59:59" + +set common_opts = "$common_opts -set_reduction LAP_SCIENCE" + +chiptool $pretend $common_opts -filter g.00000 +chiptool $pretend $common_opts -filter i.00000 +chiptool $pretend $common_opts -filter r.00000 +chiptool $pretend $common_opts -filter y.00000 +chiptool $pretend $common_opts -filter z.00000 Index: trunk/tools/eam/reprocess/SAS.41/01_stacks.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.41/01_stacks.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.41/01_stacks.cmd (revision 40818) @@ -0,0 +1,32 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 01_stacks.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" +set common_opts = "$common_opts -min_num 4" + +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" + +set common_opts = "$common_opts -set_reduction THREEPI_STACK_1DG" + +stacktool $pretend $common_opts -select_filter g.00000 +stacktool $pretend $common_opts -select_filter r.00000 +stacktool $pretend $common_opts -select_filter i.00000 +stacktool $pretend $common_opts -select_filter z.00000 +stacktool $pretend $common_opts -select_filter y.00000 Index: trunk/tools/eam/reprocess/SAS.41/02_ssky.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.41/02_ssky.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.41/02_ssky.cmd (revision 40818) @@ -0,0 +1,58 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 02_ssky.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -ra_min 320" +set common_opts = "$common_opts -ra_max 340" +set common_opts = "$common_opts -simple" + +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 +staticskytool $pretend $common_opts -select_filter r.00000 +staticskytool $pretend $common_opts -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter y.00000 Index: trunk/tools/eam/reprocess/SAS.41/03_skycal.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.41/03_skycal.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.41/03_skycal.cmd (revision 40818) @@ -0,0 +1,26 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 03_skycal.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -defineskycalrun" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -simple" + +staticskytool $pretend $common_opts Index: trunk/tools/eam/reprocess/SAS.41/04_dist.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.41/04_dist.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.41/04_dist.cmd (revision 40818) @@ -0,0 +1,17 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 04_dist.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "--pretend" +endif + +set today = `date +%Y%m%d` + +dist_defineruns.pl --verbose --no_magic --dbname gpc1 $pretend --label $label --workdir neb://@HOST@.0/gpc1/dist/$label/$today Index: trunk/tools/eam/reprocess/SAS.41/05_fforce.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.41/05_fforce.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.41/05_fforce.cmd (revision 40818) @@ -0,0 +1,29 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 03_skycal.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -select_warp_label $label" +set common_opts = "$common_opts -select_skycal_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_good_frac_min 0.05" + +set common_opts = "$common_opts -simple" + +fftool $pretend $common_opts Index: trunk/tools/eam/reprocess/SAS.41/06_diff.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.41/06_diff.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.41/06_diff.cmd (revision 40818) @@ -0,0 +1,31 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 06_diff.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definewarpstack" +set common_opts = "$common_opts -available" +set common_opts = "$common_opts -set_reduction WARPSTACK_PV3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -warp_label $label" +set common_opts = "$common_opts -stack_label LAP.PV3.20140730.final" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" +set common_opts = "$common_opts -good_frac 0.2" +set common_opts = "$common_opts -simple" + +echo $common_opts + +difftool $pretend $common_opts Index: trunk/tools/eam/reprocess/SAS.41/06a_diff_internal.cmd =================================================================== --- trunk/tools/eam/reprocess/SAS.41/06a_diff_internal.cmd (revision 40818) +++ trunk/tools/eam/reprocess/SAS.41/06a_diff_internal.cmd (revision 40818) @@ -0,0 +1,31 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 06_diff.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definewarpstack" +set common_opts = "$common_opts -available" +set common_opts = "$common_opts -set_reduction WARPSTACK_PV3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/SAS.20151208.internal" +set common_opts = "$common_opts -set_label SAS.20151208.internal" +set common_opts = "$common_opts -warp_label $label" +set common_opts = "$common_opts -stack_label $label" +set common_opts = "$common_opts -set_data_group SAS.20151208.20160119" +set common_opts = "$common_opts -set_dist_group SAS" +set common_opts = "$common_opts -good_frac 0.2" +set common_opts = "$common_opts -simple" + +echo $common_opts + +difftool $pretend $common_opts Index: trunk/tools/eam/reprocess/SAS.41/README =================================================================== --- trunk/tools/eam/reprocess/SAS.41/README (revision 40818) +++ trunk/tools/eam/reprocess/SAS.41/README (revision 40818) @@ -0,0 +1,45 @@ +README for run SAS41 -- + +-- check reduction in scripts + +-- need to match processing user w/ tag used for LAP.PV3 +--> ch/cam/wrp -- ipplanl/psconfig/ipp-pv3-20140717.lin64 +--> stk -- ipplanl/psconfig/ipp-pv3-20140717.lin64 +--> ss/sc -- ippsky/psconfig/ipp-trunk-20150624.lin64 +--> ff -- ippsky/psconfig/ipp-20150329.lin64 +--> diff -- ipptest/psconfig/ipp-20150312.lin64 + +-- manually add label to ippMonitor and restart czarPoll +~ipp/src/ippMonitor/czartool/czartool/CzarDb.pm + +-- chip/cam/warp -- ~ipplanl/stdsas + +./00_chips.cmd SAS.20151208 commit + +-- stack -- ~ipplanl/stdsas + +./01_stacks.cmd SAS.20151208 commit + +-- ss -- ~ippsky/ss_sc_ffsas -- want new pantasks for logs + +./02_ssky.cmd SAS.20151208 commit + +-- skycal ~ippsky/ss_sc_ffsas + +./03_skycal.cmd SAS.20151208 commit + +-- fforce -- ~ippsky/ss_sc_ffsas + +./05_fforce.cmd SAS.20151208 commit + +-- diff -- ~ipptest/diffsas + +./06_diff.cmd SAS.20151208 commit + + + + + + + + Index: trunk/tools/eam/reprocess/euclid.md.20180925/run.addtool =================================================================== --- trunk/tools/eam/reprocess/euclid.md.20180925/run.addtool (revision 40818) +++ trunk/tools/eam/reprocess/euclid.md.20180925/run.addtool (revision 40818) @@ -0,0 +1,102 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: run.addtool (field) [commit]" + exit 2 +endif + +set field = $1 + +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set in_label = "EUCLID.$field.PV0.FF1.V1" +set outlabel = "EUCLID.$field.PV0.FFW.V3" +set outdvo = "EUCLID.$field.PV0.FFW.V3" + +# V1 failed due to not closing the file handles +# V2 failed due to too many inputs (?) + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/euclid/$field/$outlabel" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" + +set common_opts = "$common_opts -stage fullforce" +set common_opts = "$common_opts -uncensored" + +set common_opts = "$common_opts -set_dvodb $outdvo" + +set common_opts = "$common_opts -set_minidvodb_name $outlabel" +set common_opts = "$common_opts -set_minidvodb_group $outlabel" + +set common_opts = "$common_opts -label $in_label" + +set common_opts = "$common_opts -simple" + +# set common_opts = "$common_opts -trace db 10" + +if (0) then + # first: + # addtool -addminidvodbrun + addtool -dbname gpc1 -addminidvodbrun -set_minidvodb_group $outlabel -set_minidvodb_name $outlabel -set_minidvodb_path /data/ipp121.0/ipptest/euclid.20181118.$field.ffw +endif + +if (1) then + addtool $pretend $common_opts + + # the below concept failed; needed to push the limits into addstar_multi_run.pl + + # addstar loads the N exposures worth of data for a given skycell. + # Within addstar, the stars are matched using the same algorithm + # used by DVO. This match process gets slower and slower as the number + # of input exposures increases. It is more efficient to limit the + # input exposures and rely on the match within DVO (I think). Here, + # I am trying groups of 30 for i & z and 50 for g & r + + ## # g-band : 266 exposures; 45 each -> need 6 passes + ## addtool $pretend $common_opts -filter g.00000 -limit 45 + ## addtool $pretend $common_opts -filter g.00000 -limit 45 + ## addtool $pretend $common_opts -filter g.00000 -limit 45 + ## addtool $pretend $common_opts -filter g.00000 -limit 45 + ## addtool $pretend $common_opts -filter g.00000 -limit 45 + ## addtool $pretend $common_opts -filter g.00000 -limit 45 + ## + ## # r-band : 133 exposures; 45 each -> need 3 passes + ## addtool $pretend $common_opts -filter r.00000 -limit 45 + ## addtool $pretend $common_opts -filter r.00000 -limit 45 + ## addtool $pretend $common_opts -filter r.00000 -limit 45 + ## + ## # i-band : 52 exposures; 26 each -> need 2 passes + ## addtool $pretend $common_opts -filter i.00000 -limit 26 + ## addtool $pretend $common_opts -filter i.00000 -limit 26 + + # z-band : 52 exposures; 26 each -> need 2 passes + # addtool $pretend $common_opts -filter z.00000 -limit 26 + # addtool $pretend $common_opts -filter z.00000 -limit 26 + + # for a test limit to skycell.187.268 (MD03) + # -select_skycell_id skycell.187.268 + # XXX : not allowed by addtool +endif + +# example addtool command from HAF: +# addtool +# -pretend +# -definebyquery +# -label LAP.ThreePi.20120706 +# -set_dvodb LAP.20120706 +# -set_minidvodb_group LAP.slice06.cam +# -set_minidvodb +## -set_label LAP.slice06.cam +# -stage cam +# -uncensored +# -ra_min 90 -ra_max 120 -decl_min 20 -decl_max 75 +# -dbname gpc1 +# -simple Index: trunk/tools/eam/reprocess/euclid.md.20180925/run.addtool.fgal =================================================================== --- trunk/tools/eam/reprocess/euclid.md.20180925/run.addtool.fgal (revision 40818) +++ trunk/tools/eam/reprocess/euclid.md.20180925/run.addtool.fgal (revision 40818) @@ -0,0 +1,65 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: run.addtool.fgal (field) [commit]" + exit 2 +endif + +set field = $1 + +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set in_label = "EUCLID.$field.PV0.FF1.V1" +set outlabel = "EUCLID.$field.PV0.FFG.V3" +set outdvo = "EUCLID.$field.PV0.FFG.V3" + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/euclid/$field/$outlabel" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" + +set common_opts = "$common_opts -stage fullforce_summary" +set common_opts = "$common_opts -uncensored" + +set common_opts = "$common_opts -set_dvodb $outdvo" + +set common_opts = "$common_opts -set_minidvodb_name $outlabel" +set common_opts = "$common_opts -set_minidvodb_group $outlabel" + +set common_opts = "$common_opts -label $in_label" + +set common_opts = "$common_opts -simple" + +# set common_opts = "$common_opts -trace db 10" + +if (0) then + # first: + # addtool -addminidvodbrun + addtool -dbname gpc1 -addminidvodbrun -set_minidvodb_group $outlabel -set_minidvodb_name $outlabel -set_minidvodb_path /data/ipp121.0/ipptest/euclid.20181118.$field.ffg +endif + +if (1) then + addtool $pretend $common_opts +endif + +# example addtool command from HAF: +# addtool +# -pretend +# -definebyquery +# -label LAP.ThreePi.20120706 +# -set_dvodb LAP.20120706 +# -set_minidvodb_group LAP.slice06.cam +# -set_minidvodb +## -set_label LAP.slice06.cam +# -stage cam +# -uncensored +# -ra_min 90 -ra_max 120 -decl_min 20 -decl_max 75 +# -dbname gpc1 +# -simple Index: trunk/tools/eam/reprocess/euclid.md.20180925/run.addtool.skycal =================================================================== --- trunk/tools/eam/reprocess/euclid.md.20180925/run.addtool.skycal (revision 40818) +++ trunk/tools/eam/reprocess/euclid.md.20180925/run.addtool.skycal (revision 40818) @@ -0,0 +1,65 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: run.addtool.skycal (field) [commit]" + exit 2 +endif + +set field = $1 + +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set in_label = "EUCLID.$field.PV0.SC1.V1" +set outlabel = "EUCLID.$field.PV0.SKY.V3" +set outdvo = "EUCLID.$field.PV0.SKY.V3" + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/euclid/$field/$outlabel" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" + +set common_opts = "$common_opts -stage skycal" +set common_opts = "$common_opts -uncensored" + +set common_opts = "$common_opts -set_dvodb $outdvo" + +set common_opts = "$common_opts -set_minidvodb_name $outlabel" +set common_opts = "$common_opts -set_minidvodb_group $outlabel" + +set common_opts = "$common_opts -label $in_label" + +set common_opts = "$common_opts -simple" + +# set common_opts = "$common_opts -trace db 10" + +if (0) then + # first: + # addtool -addminidvodbrun + addtool -dbname gpc1 -addminidvodbrun -set_minidvodb_group $outlabel -set_minidvodb_name $outlabel -set_minidvodb_path /data/ipp121.0/ipptest/euclid.20181118.$field.sky +endif + +if (1) then + addtool $pretend $common_opts +endif + +# example addtool command from HAF: +# addtool +# -pretend +# -definebyquery +# -label LAP.ThreePi.20120706 +# -set_dvodb LAP.20120706 +# -set_minidvodb_group LAP.slice06.cam +# -set_minidvodb +## -set_label LAP.slice06.cam +# -stage cam +# -uncensored +# -ra_min 90 -ra_max 120 -decl_min 20 -decl_max 75 +# -dbname gpc1 +# -simple Index: trunk/tools/eam/reprocess/euclid.md.20180925/run.chiptest =================================================================== --- trunk/tools/eam/reprocess/euclid.md.20180925/run.chiptest (revision 40818) +++ trunk/tools/eam/reprocess/euclid.md.20180925/run.chiptest (revision 40818) @@ -0,0 +1,23 @@ +#!/bin/csh + +set options = "" + +# set options = "$options -dbname gpc1" +set options = "$options -dbname gpc2" + +set options = "$options -definebyquery" +set options = "$options -random" +set options = "$options -simple" +# set options = "$options -pretend" + +set options = "$options -set_label eam.formattest.20180928" +set options = "$options -set_workdir neb:///gpc1/eamtest/formattest.20180928" + +set options = "$options -set_reduction MD_DEFAULT" +set options = "$options -set_tess_id CFIS.V0" + +# gpc1 image: +# chiptool $options -exp_name o8352g0613o + +# gpc2 image: +chiptool $options -exp_name o8386h0196o Index: trunk/tools/eam/reprocess/euclid.md.20180925/run.chiptool =================================================================== --- trunk/tools/eam/reprocess/euclid.md.20180925/run.chiptool (revision 40818) +++ trunk/tools/eam/reprocess/euclid.md.20180925/run.chiptool (revision 40818) @@ -0,0 +1,60 @@ +#!/bin/csh + +## caution with this script : it is not itempotent because of the -random option. +## Each time it is run it will generate another set of the requested exposures (until +## there are no more matching. + +if ($#argv != 1) then + echo "USAGE: run.chiptool [commit]" + exit 2 +endif + +if ("$1" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +# nominal exposures times required to reach Euclid goals +# g : 30,000s = 266 x 113s (we have 604 @ 113s, 80 @ 120s, 70 @ 240s) +# r : 15,000s = 133 x 113s (we have 579 @ 113s, 81 @ 120s, 64 @ 240s) +# i : 12,500s = 52 x 240s (we have 988 @ 240s) +# z : 12,500s = 52 x 240s (we have 1262 @ 240s, 32 @ 60s) + +# I need to process MD03, MD05, MD06, MD07, MD08: + +# set field = MD03 -- done +# set field = MD05 -- done +# set field = MD06 -- done +# set field = MD07 -- done +# set field = MD08 -- done + +set options = "" +set options = "$options -dbname gpc1" +set options = "$options -definebyquery" +set options = "$options -random" +set options = "$options -simple" + +set options = "$options $pretend" + +set options = "$options -dateobs_begin 2010/01/01" +set options = "$options -obs_mode MD" +set options = "$options -comment %$field%" + +set options = "$options -set_label EUCLID.$field.PV0.T1" +set options = "$options -set_workdir neb:///gpc1/euclid/$field/pv0.t1" + +set options = "$options -set_reduction MD_DEFAULT" +set options = "$options -set_tess_id CFIS.V0" + +# g-band: +chiptool $options -limit 266 -filter g.00000 -exp_time_min 110 -exp_time_max 115 + +# r-band: +chiptool $options -limit 133 -filter r.00000 -exp_time_min 110 -exp_time_max 115 + +# i-band: +chiptool $options -limit 52 -filter i.00000 -exp_time_min 230 -exp_time_max 250 + +# z-band: +chiptool $options -limit 52 -filter z.00000 -exp_time_min 230 -exp_time_max 250 Index: trunk/tools/eam/reprocess/euclid.md.20180925/run.fforce =================================================================== --- trunk/tools/eam/reprocess/euclid.md.20180925/run.fforce (revision 40818) +++ trunk/tools/eam/reprocess/euclid.md.20180925/run.fforce (revision 40818) @@ -0,0 +1,39 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: run.fforce (field) [commit]" + exit 2 +endif + +set field = $1 + +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set warp_label = "EUCLID.$field.PV0.T1" +set skycal_label = "EUCLID.$field.PV0.SC1.V1" + +set outlabel = "EUCLID.$field.PV0.FF1.V1" + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/euclid/$field/$outlabel" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" +set common_opts = "$common_opts -set_reduction STACKPHOT_EUCLID" + +set common_opts = "$common_opts -select_good_frac_min 0.05" + +set common_opts = "$common_opts -select_warp_label $warp_label" +set common_opts = "$common_opts -select_skycal_label $skycal_label" + +set common_opts = "$common_opts -simple" + +# set common_opts = "$common_opts -trace db 10" + +fftool $pretend $common_opts Index: trunk/tools/eam/reprocess/euclid.md.20180925/run.skycal =================================================================== --- trunk/tools/eam/reprocess/euclid.md.20180925/run.skycal (revision 40818) +++ trunk/tools/eam/reprocess/euclid.md.20180925/run.skycal (revision 40818) @@ -0,0 +1,30 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: run.skycal (field) [commit]" + exit 2 +endif + +set field = $1 + +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set inlabel = "EUCLID.$field.PV0.SS1.V1" +set outlabel = "EUCLID.$field.PV0.SC1.V1" + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -defineskycalrun" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/euclid/$field/$outlabel" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" + +set common_opts = "$common_opts -select_label $inlabel" +set common_opts = "$common_opts -simple" + +staticskytool $pretend $common_opts Index: trunk/tools/eam/reprocess/euclid.md.20180925/run.stacktool =================================================================== --- trunk/tools/eam/reprocess/euclid.md.20180925/run.stacktool (revision 40818) +++ trunk/tools/eam/reprocess/euclid.md.20180925/run.stacktool (revision 40818) @@ -0,0 +1,52 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: run.stacktool (field) [commit]" + exit 2 +endif + +set field = $1 + +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +# T0 : initial test run +# T1 : full run for all Euclid / MD fields (03, 05 - 08) +# T2 : test run using GAUSS kernel + +set inlabel = "EUCLID.$field.PV0.T1" +set outlabel = "EUCLID.$field.PV0.ST1" + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -select_label $inlabel" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" +set common_opts = "$common_opts -min_num 4" + +# other filter options: +# set common_opts = "$common_opts -select_astrom" +# set common_opts = "$common_opts -select_zpt_obs_max" +# set common_opts = "$common_opts -select_bg_max" +# set common_opts = "$common_opts -select_bg_stdev_max" + +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/euclid/$field/pv0.st1" + +# set common_opts = "$common_opts -set_reduction THREEPI_STACK_1DG" +# set common_opts = "$common_opts -set_reduction MD_REF_STACK_1DG" -- this requires PSF FWHM < 7.0 +set common_opts = "$common_opts -set_reduction MD_IQ_STACK_1DG" + +stacktool $pretend $common_opts -select_filter g.00000 -select_fwhm_major_max 9.0 -select_zpt_obs_min 24.1 +stacktool $pretend $common_opts -select_filter r.00000 -select_fwhm_major_max 9.0 -select_zpt_obs_min 24.3 +stacktool $pretend $common_opts -select_filter i.00000 -select_fwhm_major_max 9.0 -select_zpt_obs_min 24.4 +stacktool $pretend $common_opts -select_filter z.00000 -select_fwhm_major_max 9.0 -select_zpt_obs_min 24.2 +# stacktool $pretend $common_opts -select_filter y.00000 -select_fwhm_major_max 9.0 + +# skycell_id skycell.187.268 is roughly in the center +#echo stacktool $pretend $common_opts -select_filter i.00000 -select_zpt_obs_min 24.4 -select_fwhm_major_max 9.0 -select_skycell_id skycell.187.268 +# stacktool $pretend $common_opts -select_filter i.00000 -select_zpt_obs_min 24.4 -select_fwhm_major_max 9.0 -select_skycell_id skycell.187.268 Index: trunk/tools/eam/reprocess/euclid.md.20180925/run.staticskytool =================================================================== --- trunk/tools/eam/reprocess/euclid.md.20180925/run.staticskytool (revision 40818) +++ trunk/tools/eam/reprocess/euclid.md.20180925/run.staticskytool (revision 40818) @@ -0,0 +1,67 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: run.staticskytool (field) [commit]" + exit 2 +endif + +set field = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set inlabel = "EUCLID.$field.PV0.ST1" +set outlabel = "EUCLID.$field.PV0.SS1.V1" + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/euclid/$field/$outlabel" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" +set common_opts = "$common_opts -set_reduction STACKPHOT_EUCLID" + +set common_opts = "$common_opts -select_label $inlabel" +# set common_opts = "$common_opts -ra_min 320" +# set common_opts = "$common_opts -ra_max 340" +set common_opts = "$common_opts -simple" + +# set common_opts = "$common_opts -trace db 10" + +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 +staticskytool $pretend $common_opts -select_filter r.00000 +staticskytool $pretend $common_opts -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter y.00000 + +# echo staticskytool $pretend $common_opts -select_filter i.00000 +# staticskytool $pretend $common_opts -select_filter i.00000 Index: trunk/tools/eam/reprocess/euclid.md.20180925/run.warptool =================================================================== --- trunk/tools/eam/reprocess/euclid.md.20180925/run.warptool (revision 40818) +++ trunk/tools/eam/reprocess/euclid.md.20180925/run.warptool (revision 40818) @@ -0,0 +1,64 @@ +#!/bin/csh + +## this script was used to re-queue exposures for warp using GAUSS +## interpolation instead of the LANCZOS3 interpolation already run. + +if ($#argv != 1) then + echo "USAGE: run.warptool [commit]" + exit 2 +endif + +if ("$1" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +# nominal exposures times required to reach Euclid goals +# g : 30,000s = 266 x 113s (we have 604 @ 113s, 80 @ 120s, 70 @ 240s) +# r : 15,000s = 133 x 113s (we have 579 @ 113s, 81 @ 120s, 64 @ 240s) +# i : 12,500s = 52 x 240s (we have 988 @ 240s) +# z : 12,500s = 52 x 240s (we have 1262 @ 240s, 32 @ 60s) + +# I need to process MD03, MD05, MD06, MD07, MD08: + +set field = MD03 +# set field = MD05 -- done +# set field = MD06 -- done +# set field = MD07 -- done +# set field = MD08 -- done + +set options = "" +set options = "$options -dbname gpc1" +set options = "$options -definebyquery" +set options = "$options -set_mode warp" +set options = "$options -simple" + +set options = "$options $pretend" + +# set options = "$options -dateobs_begin 2010/01/01" +# set options = "$options -obs_mode MD" +# set options = "$options -comment %$field%" + +# we are re-running exposures which were previousl processed with LANCZOS3 +# using the following label +set options = "$options -label EUCLID.$field.PV0.T1" + +# T2 : warp test using GAUSS interpolation +set options = "$options -set_label EUCLID.$field.PV0.T2" +set options = "$options -set_workdir neb:///gpc1/euclid/$field/pv0.t2" + +set options = "$options -set_reduction MD_WARP_TEST" +set options = "$options -set_tess_id CFIS.V0" + +# g-band: +# warptool $options -filter g.00000 + +# r-band: +# warptool $options -filter r.00000 + +# i-band: +warptool $options -filter i.00000 + +# z-band: +# warptool $options -filter z.00000 Index: trunk/tools/eam/reprocess/pole.reprocess.20180427/00_chips.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20180427/00_chips.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20180427/00_chips.cmd (revision 40818) @@ -0,0 +1,46 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 00_chips.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +#set common_opts = "$common_opts -obs_mode 3PI" +set common_opts = "$common_opts -obs_mode OSS" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_end_stage warp" +set common_opts = "$common_opts -set_tess_id RINGS.V3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/POLE/$label" +set common_opts = "$common_opts -simple -set_dist_group SAS" + +set common_opts = "$common_opts -ra_min 0.0" +set common_opts = "$common_opts -ra_max 362.0" +# set common_opts = "$common_opts -ra_min 359.99995" -- used for edge exposures missed initially +set common_opts = "$common_opts -decl_min 75.0" +set common_opts = "$common_opts -decl_max 90.0" + +set common_opts = "$common_opts -dateobs_begin 2010-01-01T00:00:00" +set common_opts = "$common_opts -dateobs_end 2015-02-28T00:00:00" + +# I initially used 2015.01.01, but the original PV3.LAP used a later date +# set common_opts = "$common_opts -dateobs_end 2015-01-01T00:00:00" + +set common_opts = "$common_opts -set_reduction LAP_SCIENCE" + +chiptool $pretend $common_opts -filter g.00000 +chiptool $pretend $common_opts -filter r.00000 +chiptool $pretend $common_opts -filter i.00000 +chiptool $pretend $common_opts -filter z.00000 + +#chiptool $pretend $common_opts -filter y.00000 Index: trunk/tools/eam/reprocess/pole.reprocess.20180427/00_chips_extra.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20180427/00_chips_extra.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20180427/00_chips_extra.cmd (revision 40818) @@ -0,0 +1,61 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 00_chips.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_end_stage warp" +set common_opts = "$common_opts -set_tess_id RINGS.V3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/POLE/$label" +set common_opts = "$common_opts -simple -set_dist_group SAS" + +# I initially used 2015.01.01, but the original PV3.LAP used a later date +# set common_opts = "$common_opts -dateobs_end 2015-01-01T00:00:00" + +set common_opts = "$common_opts -set_reduction LAP_SCIENCE" + +# I put these in the label PV3.Pole.Reprocess.20180510.extra +# chiptool $pretend $common_opts -exp_name o5078g0145o +# chiptool $pretend $common_opts -exp_name o5078g0156o +# chiptool $pretend $common_opts -exp_name o4992g0280o +# chiptool $pretend $common_opts -exp_name o4995g0257o +# chiptool $pretend $common_opts -exp_name o4995g0275o +# chiptool $pretend $common_opts -exp_name o4997g0277o +# chiptool $pretend $common_opts -exp_name o4985g0060o +# chiptool $pretend $common_opts -exp_name o4985g0066o +# chiptool $pretend $common_opts -exp_name o4985g0046o +# chiptool $pretend $common_opts -exp_name o5077g0226o +# chiptool $pretend $common_opts -exp_name o5077g0243o +# chiptool $pretend $common_opts -exp_name o5078g0232o +# chiptool $pretend $common_opts -exp_name o5078g0249o +# chiptool $pretend $common_opts -exp_name o5078g0224o +# chiptool $pretend $common_opts -exp_name o5078g0241o +# chiptool $pretend $common_opts -exp_name o5194g0570o +# chiptool $pretend $common_opts -exp_name o5194g0583o +# chiptool $pretend $common_opts -exp_name o4988g0361o +# chiptool $pretend $common_opts -exp_name o4988g0378o +# chiptool $pretend $common_opts -exp_name o5078g0160o +# chiptool $pretend $common_opts -exp_name o5078g0149o +# chiptool $pretend $common_opts -exp_name o4999g0273o +# chiptool $pretend $common_opts -exp_name o4999g0286o +# chiptool $pretend $common_opts -exp_name o5076g0278o +# chiptool $pretend $common_opts -exp_name o5076g0295o + +# I put these in the label PV3.Pole.Reprocess.20180510 +chiptool $pretend $common_opts -exp_name o7049g0085o +chiptool $pretend $common_opts -exp_name o7049g0086o +chiptool $pretend $common_opts -exp_name o7050g0081o +chiptool $pretend $common_opts -exp_name o7050g0082o Index: trunk/tools/eam/reprocess/pole.reprocess.20180427/01_stacks.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20180427/01_stacks.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20180427/01_stacks.cmd (revision 40818) @@ -0,0 +1,33 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 01_stacks.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group $label" +set common_opts = "$common_opts -min_num 4" +set common_opts = "$common_opts -simple" + +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/POLE/$label" + +set common_opts = "$common_opts -set_reduction THREEPI_STACK_1DG" + +stacktool $pretend $common_opts -select_filter g.00000 +stacktool $pretend $common_opts -select_filter r.00000 +stacktool $pretend $common_opts -select_filter i.00000 +stacktool $pretend $common_opts -select_filter z.00000 +stacktool $pretend $common_opts -select_filter y.00000 Index: trunk/tools/eam/reprocess/pole.reprocess.20180427/02_ssky.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20180427/02_ssky.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20180427/02_ssky.cmd (revision 40818) @@ -0,0 +1,58 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 02_ssky.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -ra_min 320" +set common_opts = "$common_opts -ra_max 340" +set common_opts = "$common_opts -simple" + +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 +staticskytool $pretend $common_opts -select_filter r.00000 +staticskytool $pretend $common_opts -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter y.00000 Index: trunk/tools/eam/reprocess/pole.reprocess.20180427/03_skycal.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20180427/03_skycal.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20180427/03_skycal.cmd (revision 40818) @@ -0,0 +1,26 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 03_skycal.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -defineskycalrun" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -simple" + +staticskytool $pretend $common_opts Index: trunk/tools/eam/reprocess/pole.reprocess.20180427/04_dist.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20180427/04_dist.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20180427/04_dist.cmd (revision 40818) @@ -0,0 +1,17 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 04_dist.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "--pretend" +endif + +set today = `date +%Y%m%d` + +dist_defineruns.pl --verbose --no_magic --dbname gpc1 $pretend --label $label --workdir neb://@HOST@.0/gpc1/dist/$label/$today Index: trunk/tools/eam/reprocess/pole.reprocess.20180427/05_fforce.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20180427/05_fforce.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20180427/05_fforce.cmd (revision 40818) @@ -0,0 +1,29 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 03_skycal.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -select_warp_label $label" +set common_opts = "$common_opts -select_skycal_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_good_frac_min 0.05" + +set common_opts = "$common_opts -simple" + +fftool $pretend $common_opts Index: trunk/tools/eam/reprocess/pole.reprocess.20180427/06_diff.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20180427/06_diff.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20180427/06_diff.cmd (revision 40818) @@ -0,0 +1,31 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 06_diff.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definewarpstack" +set common_opts = "$common_opts -available" +set common_opts = "$common_opts -set_reduction WARPSTACK_PV3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -warp_label $label" +set common_opts = "$common_opts -stack_label LAP.PV3.20140730.final" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" +set common_opts = "$common_opts -good_frac 0.2" +set common_opts = "$common_opts -simple" + +echo $common_opts + +difftool $pretend $common_opts Index: trunk/tools/eam/reprocess/pole.reprocess.20180427/06a_diff_internal.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20180427/06a_diff_internal.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20180427/06a_diff_internal.cmd (revision 40818) @@ -0,0 +1,31 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 06_diff.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definewarpstack" +set common_opts = "$common_opts -available" +set common_opts = "$common_opts -set_reduction WARPSTACK_PV3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/SAS.20151208.internal" +set common_opts = "$common_opts -set_label SAS.20151208.internal" +set common_opts = "$common_opts -warp_label $label" +set common_opts = "$common_opts -stack_label $label" +set common_opts = "$common_opts -set_data_group SAS.20151208.20160119" +set common_opts = "$common_opts -set_dist_group SAS" +set common_opts = "$common_opts -good_frac 0.2" +set common_opts = "$common_opts -simple" + +echo $common_opts + +difftool $pretend $common_opts Index: trunk/tools/eam/reprocess/pole.reprocess.20190619/00_chips.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20190619/00_chips.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20190619/00_chips.cmd (revision 40818) @@ -0,0 +1,48 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 00_chips.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +#set common_opts = "$common_opts -obs_mode 3PI" +set common_opts = "$common_opts -obs_mode OSS" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_end_stage warp" +set common_opts = "$common_opts -set_tess_id RINGS.V3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/POLE/$label" +set common_opts = "$common_opts -simple -set_dist_group SAS" + +## set common_opts = "$common_opts -ra_min 0.0" +## set common_opts = "$common_opts -ra_max 362.0" ; # need to go beyond 360 to get all exposures. +## set common_opts = "$common_opts -decl_min 75.0" +## set common_opts = "$common_opts -decl_max 90.0" + +## test set: +set common_opts = "$common_opts -ra_min 130.0" +set common_opts = "$common_opts -ra_max 190.0" ; # need to go beyond 360 to get all exposures. +set common_opts = "$common_opts -decl_min 86.0" +set common_opts = "$common_opts -decl_max 90.0" + +set common_opts = "$common_opts -dateobs_begin 2010-01-01T00:00:00" +set common_opts = "$common_opts -dateobs_end 2015-02-28T00:00:00" + +set common_opts = "$common_opts -set_reduction LAP_POLE" + +## for test set, just run i-band: +#chiptool $pretend $common_opts -filter g.00000 +#chiptool $pretend $common_opts -filter r.00000 + chiptool $pretend $common_opts -filter i.00000 +#chiptool $pretend $common_opts -filter z.00000 +#chiptool $pretend $common_opts -filter y.00000 Index: trunk/tools/eam/reprocess/pole.reprocess.20190619/00_chips_extra.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20190619/00_chips_extra.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20190619/00_chips_extra.cmd (revision 40818) @@ -0,0 +1,61 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 00_chips.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_end_stage warp" +set common_opts = "$common_opts -set_tess_id RINGS.V3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/POLE/$label" +set common_opts = "$common_opts -simple -set_dist_group SAS" + +# I initially used 2015.01.01, but the original PV3.LAP used a later date +# set common_opts = "$common_opts -dateobs_end 2015-01-01T00:00:00" + +set common_opts = "$common_opts -set_reduction LAP_POLE" + +# I put these in the label PV3.Pole.Reprocess.20180510.extra +# chiptool $pretend $common_opts -exp_name o5078g0145o +# chiptool $pretend $common_opts -exp_name o5078g0156o +# chiptool $pretend $common_opts -exp_name o4992g0280o +# chiptool $pretend $common_opts -exp_name o4995g0257o +# chiptool $pretend $common_opts -exp_name o4995g0275o +# chiptool $pretend $common_opts -exp_name o4997g0277o +# chiptool $pretend $common_opts -exp_name o4985g0060o +# chiptool $pretend $common_opts -exp_name o4985g0066o +# chiptool $pretend $common_opts -exp_name o4985g0046o +# chiptool $pretend $common_opts -exp_name o5077g0226o +# chiptool $pretend $common_opts -exp_name o5077g0243o +# chiptool $pretend $common_opts -exp_name o5078g0232o +# chiptool $pretend $common_opts -exp_name o5078g0249o +# chiptool $pretend $common_opts -exp_name o5078g0224o +# chiptool $pretend $common_opts -exp_name o5078g0241o +# chiptool $pretend $common_opts -exp_name o5194g0570o +# chiptool $pretend $common_opts -exp_name o5194g0583o +# chiptool $pretend $common_opts -exp_name o4988g0361o +# chiptool $pretend $common_opts -exp_name o4988g0378o +# chiptool $pretend $common_opts -exp_name o5078g0160o +# chiptool $pretend $common_opts -exp_name o5078g0149o +# chiptool $pretend $common_opts -exp_name o4999g0273o +# chiptool $pretend $common_opts -exp_name o4999g0286o +# chiptool $pretend $common_opts -exp_name o5076g0278o +# chiptool $pretend $common_opts -exp_name o5076g0295o + +# I put these in the label PV3.Pole.Reprocess.20180510 +chiptool $pretend $common_opts -exp_name o7049g0085o +chiptool $pretend $common_opts -exp_name o7049g0086o +chiptool $pretend $common_opts -exp_name o7050g0081o +chiptool $pretend $common_opts -exp_name o7050g0082o Index: trunk/tools/eam/reprocess/pole.reprocess.20190619/01_stacks.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20190619/01_stacks.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20190619/01_stacks.cmd (revision 40818) @@ -0,0 +1,33 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 01_stacks.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group $label" +set common_opts = "$common_opts -min_num 4" +set common_opts = "$common_opts -simple" + +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/POLE/$label" + +set common_opts = "$common_opts -set_reduction THREEPI_STACK_1DG" + +stacktool $pretend $common_opts -select_filter g.00000 +stacktool $pretend $common_opts -select_filter r.00000 +stacktool $pretend $common_opts -select_filter i.00000 +stacktool $pretend $common_opts -select_filter z.00000 +stacktool $pretend $common_opts -select_filter y.00000 Index: trunk/tools/eam/reprocess/pole.reprocess.20190619/02_ssky.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20190619/02_ssky.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20190619/02_ssky.cmd (revision 40818) @@ -0,0 +1,58 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 02_ssky.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -ra_min 320" +set common_opts = "$common_opts -ra_max 340" +set common_opts = "$common_opts -simple" + +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter g.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter r.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter z.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter g.00000 +staticskytool $pretend $common_opts -select_filter r.00000 +staticskytool $pretend $common_opts -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter z.00000 +staticskytool $pretend $common_opts -select_filter y.00000 Index: trunk/tools/eam/reprocess/pole.reprocess.20190619/03_skycal.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20190619/03_skycal.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20190619/03_skycal.cmd (revision 40818) @@ -0,0 +1,26 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 03_skycal.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -defineskycalrun" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_label $label" +set common_opts = "$common_opts -simple" + +staticskytool $pretend $common_opts Index: trunk/tools/eam/reprocess/pole.reprocess.20190619/04_dist.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20190619/04_dist.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20190619/04_dist.cmd (revision 40818) @@ -0,0 +1,17 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 04_dist.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "--pretend" +endif + +set today = `date +%Y%m%d` + +dist_defineruns.pl --verbose --no_magic --dbname gpc1 $pretend --label $label --workdir neb://@HOST@.0/gpc1/dist/$label/$today Index: trunk/tools/eam/reprocess/pole.reprocess.20190619/05_fforce.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20190619/05_fforce.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20190619/05_fforce.cmd (revision 40818) @@ -0,0 +1,29 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 03_skycal.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -select_warp_label $label" +set common_opts = "$common_opts -select_skycal_label $label" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" + +set common_opts = "$common_opts -select_good_frac_min 0.05" + +set common_opts = "$common_opts -simple" + +fftool $pretend $common_opts Index: trunk/tools/eam/reprocess/pole.reprocess.20190619/06_diff.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20190619/06_diff.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20190619/06_diff.cmd (revision 40818) @@ -0,0 +1,31 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 06_diff.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definewarpstack" +set common_opts = "$common_opts -available" +set common_opts = "$common_opts -set_reduction WARPSTACK_PV3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/$label" +set common_opts = "$common_opts -set_label $label" +set common_opts = "$common_opts -warp_label $label" +set common_opts = "$common_opts -stack_label LAP.PV3.20140730.final" +set common_opts = "$common_opts -set_data_group $label" +set common_opts = "$common_opts -set_dist_group SAS" +set common_opts = "$common_opts -good_frac 0.2" +set common_opts = "$common_opts -simple" + +echo $common_opts + +difftool $pretend $common_opts Index: trunk/tools/eam/reprocess/pole.reprocess.20190619/06a_diff_internal.cmd =================================================================== --- trunk/tools/eam/reprocess/pole.reprocess.20190619/06a_diff_internal.cmd (revision 40818) +++ trunk/tools/eam/reprocess/pole.reprocess.20190619/06a_diff_internal.cmd (revision 40818) @@ -0,0 +1,31 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: 06_diff.cmd (label) [commit]" + exit 2 +endif + +set label = $1 +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definewarpstack" +set common_opts = "$common_opts -available" +set common_opts = "$common_opts -set_reduction WARPSTACK_PV3" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/SAS2/SAS.20151208.internal" +set common_opts = "$common_opts -set_label SAS.20151208.internal" +set common_opts = "$common_opts -warp_label $label" +set common_opts = "$common_opts -stack_label $label" +set common_opts = "$common_opts -set_data_group SAS.20151208.20160119" +set common_opts = "$common_opts -set_dist_group SAS" +set common_opts = "$common_opts -good_frac 0.2" +set common_opts = "$common_opts -simple" + +echo $common_opts + +difftool $pretend $common_opts Index: trunk/tools/eam/reprocess/unions.dr2.20190430/run.addtool.ffwarp =================================================================== --- trunk/tools/eam/reprocess/unions.dr2.20190430/run.addtool.ffwarp (revision 40818) +++ trunk/tools/eam/reprocess/unions.dr2.20190430/run.addtool.ffwarp (revision 40818) @@ -0,0 +1,73 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: run.addtool.ffwarp (mode) [commit/test]" + echo " mode = minidvo or queue" + exit 2 +endif + +set mode = $1 + +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set in_label = "UNIONS.DR2.20190430" +set outlabel = "UNIONS.DR2.20190430.FFW.V0" +set outdvo = "UNIONS.DR2.20190430.FFW.V0" + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/UNIONS.DR2.20190430.FFORCE" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" + +set common_opts = "$common_opts -stage fullforce" +set common_opts = "$common_opts -uncensored" + +set common_opts = "$common_opts -limit 50000" +# set common_opts = "$common_opts -limit 5" + +set common_opts = "$common_opts -set_dvodb $outdvo" + +set common_opts = "$common_opts -set_minidvodb_name $outlabel" +set common_opts = "$common_opts -set_minidvodb_group $outlabel" + +set common_opts = "$common_opts -label $in_label" + +set common_opts = "$common_opts -simple" + +# set common_opts = "$common_opts -trace db 10" + +# generate the addminidvodbrun first +if ("$mode" == "minidvo") then + addtool -dbname gpc1 -addminidvodbrun -set_minidvodb_group $outlabel -set_minidvodb_name $outlabel -set_minidvodb_path /data/ipp139.0/ipptest/$outdvo + exit 0 +endif + +if ("$mode" == "queue") then + addtool $pretend $common_opts + exit 0 +endif + +echo "unknown mode $mode" +exit 2 + +# example addtool command from HAF: +# addtool +# -pretend +# -definebyquery +# -label LAP.ThreePi.20120706 +# -set_dvodb LAP.20120706 +# -set_minidvodb_group LAP.slice06.cam +# -set_minidvodb +## -set_label LAP.slice06.cam +# -stage cam +# -uncensored +# -ra_min 90 -ra_max 120 -decl_min 20 -decl_max 75 +# -dbname gpc1 +# -simple Index: trunk/tools/eam/reprocess/unions.dr2.20190430/run.addtool.fgal =================================================================== --- trunk/tools/eam/reprocess/unions.dr2.20190430/run.addtool.fgal (revision 40818) +++ trunk/tools/eam/reprocess/unions.dr2.20190430/run.addtool.fgal (revision 40818) @@ -0,0 +1,65 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: run.addtool.fgal (field) [commit]" + exit 2 +endif + +set field = $1 + +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set in_label = "EUCLID.$field.PV0.FF1.V1" +set outlabel = "EUCLID.$field.PV0.FFG.V3" +set outdvo = "EUCLID.$field.PV0.FFG.V3" + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/euclid/$field/$outlabel" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" + +set common_opts = "$common_opts -stage fullforce_summary" +set common_opts = "$common_opts -uncensored" + +set common_opts = "$common_opts -set_dvodb $outdvo" + +set common_opts = "$common_opts -set_minidvodb_name $outlabel" +set common_opts = "$common_opts -set_minidvodb_group $outlabel" + +set common_opts = "$common_opts -label $in_label" + +set common_opts = "$common_opts -simple" + +# set common_opts = "$common_opts -trace db 10" + +if (0) then + # first: + # addtool -addminidvodbrun + addtool -dbname gpc1 -addminidvodbrun -set_minidvodb_group $outlabel -set_minidvodb_name $outlabel -set_minidvodb_path /data/ipp121.0/ipptest/euclid.20181118.$field.ffg +endif + +if (1) then + addtool $pretend $common_opts +endif + +# example addtool command from HAF: +# addtool +# -pretend +# -definebyquery +# -label LAP.ThreePi.20120706 +# -set_dvodb LAP.20120706 +# -set_minidvodb_group LAP.slice06.cam +# -set_minidvodb +## -set_label LAP.slice06.cam +# -stage cam +# -uncensored +# -ra_min 90 -ra_max 120 -decl_min 20 -decl_max 75 +# -dbname gpc1 +# -simple Index: trunk/tools/eam/reprocess/unions.dr2.20190430/run.addtool.skycal =================================================================== --- trunk/tools/eam/reprocess/unions.dr2.20190430/run.addtool.skycal (revision 40818) +++ trunk/tools/eam/reprocess/unions.dr2.20190430/run.addtool.skycal (revision 40818) @@ -0,0 +1,70 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: run.addtool.skycal (mode) [commit/test]" + echo " mode = minidvo or queue" + exit 2 +endif + +set mode = $1 + +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set in_label = "UNIONS.DR2.20190430" +set outlabel = "UNIONS.DR2.20190430.SKY.V0" +set outdvo = "UNIONS.DR2.20190430.SKY.V0" + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/UNIONS.DR2.20190430.SKYCAL" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" + +set common_opts = "$common_opts -stage skycal" +set common_opts = "$common_opts -uncensored" + +set common_opts = "$common_opts -set_dvodb $outdvo" + +set common_opts = "$common_opts -set_minidvodb_name $outlabel" +set common_opts = "$common_opts -set_minidvodb_group $outlabel" + +set common_opts = "$common_opts -label $in_label" + +set common_opts = "$common_opts -simple" + +# set common_opts = "$common_opts -trace db 10" + +# generate the addminidvodbrun first +if ("$mode" == "minidvo") then + addtool -dbname gpc1 -addminidvodbrun -set_minidvodb_group $outlabel -set_minidvodb_name $outlabel -set_minidvodb_path /data/ipp139.0/ipptest/$outdvo + exit 0 +endif + +if ("$mode" == "queue") then + addtool $pretend $common_opts + exit 0 +endif + +echo "unknown mode $mode" +exit 2 + +# example addtool command from HAF: +# addtool +# -pretend +# -definebyquery +# -label LAP.ThreePi.20120706 +# -set_dvodb LAP.20120706 +# -set_minidvodb_group LAP.slice06.cam +# -set_minidvodb +## -set_label LAP.slice06.cam +# -stage cam +# -uncensored +# -ra_min 90 -ra_max 120 -decl_min 20 -decl_max 75 +# -dbname gpc1 +# -simple Index: trunk/tools/eam/reprocess/unions.dr2.20190430/run.chiptool =================================================================== --- trunk/tools/eam/reprocess/unions.dr2.20190430/run.chiptool (revision 40818) +++ trunk/tools/eam/reprocess/unions.dr2.20190430/run.chiptool (revision 40818) @@ -0,0 +1,74 @@ +#!/bin/csh + +if ($#argv != 1) then + echo "USAGE: run.chiptool [commit]" + exit 2 +endif + +if ("$1" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +# areas to process: +# north cap 1: 10h - 12h, 30d - 40d + +set options = "" +set options = "$options -dbname gpc1" +set options = "$options -definebyquery" +set options = "$options -simple" + +# set options = "$options -random" + +set options = "$options $pretend" + +set options = "$options -dateobs_begin 2010/01/01" + +set options = "$options -set_label UNIONS.DR2.20190430" +set options = "$options -set_workdir neb:///gpc1/UNIONS.DR2.20190430" + +set options = "$options -set_reduction DEFAULT" +set options = "$options -set_tess_id CFIS.V0" + +# north cap r2: +set region = "-ra_min 120 -ra_max 150 -decl_min 30 -decl_max 40" +echo chiptool $options -filter i.00000 $region -obs_mode 3pi ; chiptool $options -filter i.00000 $region -obs_mode 3pi | wc -l +echo chiptool $options -filter i.00000 $region -obs_mode OSS ; chiptool $options -filter i.00000 $region -obs_mode OSS | wc -l +echo chiptool $options -filter i.00000 $region -obs_mode QUB ; chiptool $options -filter i.00000 $region -obs_mode QUB | wc -l +echo chiptool $options -filter i.00000 $region -obs_mode SNIa ; chiptool $options -filter i.00000 $region -obs_mode SNIa | wc -l +echo chiptool $options -filter z.00000 $region -obs_mode 3pi ; chiptool $options -filter z.00000 $region -obs_mode 3pi | wc -l +echo chiptool $options -filter z.00000 $region -obs_mode Bright ; chiptool $options -filter z.00000 $region -obs_mode Bright | wc -l +echo chiptool $options -filter z.00000 $region -obs_mode SNIa ; chiptool $options -filter z.00000 $region -obs_mode SNIa | wc -l +exit + +# north cap r1: +set region = "-ra_min 150 -ra_max 180 -decl_min 30 -decl_max 40" +echo chiptool $options -filter i.00000 $region -obs_mode 3pi ; chiptool $options -filter i.00000 $region -obs_mode 3pi | wc -l +echo chiptool $options -filter i.00000 $region -obs_mode OSS ; chiptool $options -filter i.00000 $region -obs_mode OSS | wc -l +echo chiptool $options -filter i.00000 $region -obs_mode QUB ; chiptool $options -filter i.00000 $region -obs_mode QUB | wc -l +echo chiptool $options -filter i.00000 $region -obs_mode SNIa ; chiptool $options -filter i.00000 $region -obs_mode SNIa | wc -l +echo chiptool $options -filter z.00000 $region -obs_mode 3pi ; chiptool $options -filter z.00000 $region -obs_mode 3pi | wc -l +echo chiptool $options -filter z.00000 $region -obs_mode Bright ; chiptool $options -filter z.00000 $region -obs_mode Bright | wc -l +echo chiptool $options -filter z.00000 $region -obs_mode SNIa ; chiptool $options -filter z.00000 $region -obs_mode SNIa | wc -l + +# south cap, r1: +set region = "-ra_min 0 -ra_max 45 -decl_min 30 -decl_max 40" +echo chiptool $options -filter i.00000 $region -obs_mode 3pi ; chiptool $options -filter i.00000 $region -obs_mode 3pi | wc -l +echo chiptool $options -filter i.00000 $region -obs_mode OSS ; chiptool $options -filter i.00000 $region -obs_mode OSS | wc -l +echo chiptool $options -filter i.00000 $region -obs_mode QUB ; chiptool $options -filter i.00000 $region -obs_mode QUB | wc -l +echo chiptool $options -filter i.00000 $region -obs_mode SNIa ; chiptool $options -filter i.00000 $region -obs_mode SNIa | wc -l +echo chiptool $options -filter z.00000 $region -obs_mode 3pi ; chiptool $options -filter z.00000 $region -obs_mode 3pi | wc -l +echo chiptool $options -filter z.00000 $region -obs_mode Bright ; chiptool $options -filter z.00000 $region -obs_mode Bright | wc -l +echo chiptool $options -filter z.00000 $region -obs_mode QUB ; chiptool $options -filter z.00000 $region -obs_mode QUB | wc -l +echo chiptool $options -filter z.00000 $region -obs_mode SNIa ; chiptool $options -filter z.00000 $region -obs_mode SNIa | wc -l + +# south cap, r2: +set region = "-ra_min 345 -ra_max 360 -decl_min 30 -decl_max 40" +echo chiptool $options -filter i.00000 $region -obs_mode 3pi ; chiptool $options -filter i.00000 $region -obs_mode 3pi | wc -l +echo chiptool $options -filter i.00000 $region -obs_mode OSS ; chiptool $options -filter i.00000 $region -obs_mode OSS | wc -l +echo chiptool $options -filter i.00000 $region -obs_mode SNIa ; chiptool $options -filter i.00000 $region -obs_mode SNIa | wc -l +echo chiptool $options -filter z.00000 $region -obs_mode 3pi ; chiptool $options -filter z.00000 $region -obs_mode 3pi | wc -l +echo chiptool $options -filter z.00000 $region -obs_mode Bright ; chiptool $options -filter z.00000 $region -obs_mode Bright | wc -l +echo chiptool $options -filter z.00000 $region -obs_mode SNIa ; chiptool $options -filter z.00000 $region -obs_mode SNIa | wc -l + Index: trunk/tools/eam/reprocess/unions.dr2.20190430/run.fforce =================================================================== --- trunk/tools/eam/reprocess/unions.dr2.20190430/run.fforce (revision 40818) +++ trunk/tools/eam/reprocess/unions.dr2.20190430/run.fforce (revision 40818) @@ -0,0 +1,37 @@ +#!/bin/csh -f + +if ($#argv != 1) then + echo "USAGE: run.fforce [commit]" + exit 2 +endif + +if ("$1" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set warp_label = "UNIONS.DR2.20190430" +set skycal_label = "UNIONS.DR2.20190430" + +set outlabel = "UNIONS.DR2.20190430" + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/UNIONS.DR2.20190430.FFORCE" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" +set common_opts = "$common_opts -set_reduction STACKPHOT_EUCLID" + +set common_opts = "$common_opts -select_good_frac_min 0.05" + +set common_opts = "$common_opts -select_warp_label $warp_label" +set common_opts = "$common_opts -select_skycal_label $skycal_label" + +set common_opts = "$common_opts -simple" + +# set common_opts = "$common_opts -trace db 10" + +fftool $pretend $common_opts Index: trunk/tools/eam/reprocess/unions.dr2.20190430/run.skycal =================================================================== --- trunk/tools/eam/reprocess/unions.dr2.20190430/run.skycal (revision 40818) +++ trunk/tools/eam/reprocess/unions.dr2.20190430/run.skycal (revision 40818) @@ -0,0 +1,28 @@ +#!/bin/csh -f + +if ($#argv != 1) then + echo "USAGE: run.skycal [commit]" + exit 2 +endif + +if ("$1" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set inlabel = "UNIONS.DR2.20190430" +set outlabel = "UNIONS.DR2.20190430" + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -defineskycalrun" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/UNIONS.DR2.20190430.SKYCAL" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" + +set common_opts = "$common_opts -select_label $inlabel" +set common_opts = "$common_opts -simple" + +staticskytool $pretend $common_opts Index: trunk/tools/eam/reprocess/unions.dr2.20190430/run.stack =================================================================== --- trunk/tools/eam/reprocess/unions.dr2.20190430/run.stack (revision 40818) +++ trunk/tools/eam/reprocess/unions.dr2.20190430/run.stack (revision 40818) @@ -0,0 +1,7 @@ +#!/bin/csh + +# neb://any/gpc1/UNIONS.DR2.20190430.STACK/CFIS.V0/skycell.000.245/CFIS.V0.skycell.000.245.stk.5408473 + +stack_skycell.pl --threads 4 --stack_id 5408473 --outroot stacktest.t1 --run-state new --reduction THREEPI_STACK_1DG --dbname gpc1 --verbose --no-update --save-temps + +# -input /tmp/CFIS.V0.skycell.000.245.stk.5408473.list.7Lt7 stacktest.t1 -stats stacktest.t1.stats -recipe PPSTACK STACK_THREEPI -recipe PPSUB STACK_1DG -recipe PSPHOT STACK -recipe PPSTATS STACKSTATS -stack-type DEEP_STACK -F PSPHOT.PSF.SAVE PSPHOT.PSF.SKY.SAVE -F PSPHOT.OUTPUT PSPHOT.OUT.CMF.MEF -F PSPHOT.BACKMDL PSPHOT.BACKMDL.MEF -F SOURCE.PLOT.MOMENTS SOURCE.PLOT.SKY.MOMENTS -F SOURCE.PLOT.PSFMODEL SOURCE.PLOT.SKY.PSFMODEL -F SOURCE.PLOT.APRESID SOURCE.PLOT.SKY.APRESID -R PPSTACK.OUTPUT FITS.TYPE COMP_STACK -R PPSTACK.OUTPUT.VARIANCE FITS.TYPE COMP_STACK -R PPSTACK.UNCONV FITS.TYPE COMP_STACK -R PPSTACK.UNCONV.VARIANCE FITS.TYPE COMP_STACK -threads 4 -dbname gpc1 -image_id 5408473 -source_id 35 -stack_id 5408473 -skycell_id skycell.000.245 -tess_id CFIS.V0 Index: trunk/tools/eam/reprocess/unions.dr2.20190430/run.stacktool =================================================================== --- trunk/tools/eam/reprocess/unions.dr2.20190430/run.stacktool (revision 40818) +++ trunk/tools/eam/reprocess/unions.dr2.20190430/run.stacktool (revision 40818) @@ -0,0 +1,56 @@ +#!/bin/csh -f + +if ($#argv != 2) then + echo "USAGE: run.stacktool (filter) [commit]" + exit 2 +endif + +if ("$2" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set inlabel = "UNIONS.DR2.20190430" +set outlabel = "UNIONS.DR2.20190430" + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -select_label $inlabel" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" +set common_opts = "$common_opts -min_num 4" +set common_opts = "$common_opts -simple" + +# other filter options: +# set common_opts = "$common_opts -select_astrom" +# set common_opts = "$common_opts -select_zpt_obs_max" +# set common_opts = "$common_opts -select_bg_max" +# set common_opts = "$common_opts -select_bg_stdev_max" + +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/UNIONS.DR2.20190430.STACK" + +set common_opts = "$common_opts -set_reduction THREEPI_STACK_1DG" +# set common_opts = "$common_opts -set_reduction MD_REF_STACK_1DG" -- this requires PSF FWHM < 7.0 +# set common_opts = "$common_opts -set_reduction MD_IQ_STACK_1DG" + +if ("$1" == "i") then + # this cuts ~ 9.5% + stacktool $pretend $common_opts -select_filter i.00000 -select_fwhm_major_max 9.0 -select_zpt_obs_min 24.4 + exit 0 +endif + +if ("$1" == "z") then + # this cuts ~ 20% + stacktool $pretend $common_opts -select_filter z.00000 -select_fwhm_major_max 9.0 -select_zpt_obs_min 24.2 + exit 0 +endif + +echo "unknown filter $1" +exit 2 + +# skycell_id skycell.187.268 is roughly in the center +#echo stacktool $pretend $common_opts -select_filter i.00000 -select_zpt_obs_min 24.4 -select_fwhm_major_max 9.0 -select_skycell_id skycell.187.268 +# stacktool $pretend $common_opts -select_filter i.00000 -select_zpt_obs_min 24.4 -select_fwhm_major_max 9.0 -select_skycell_id skycell.187.268 Index: trunk/tools/eam/reprocess/unions.dr2.20190430/run.staticskytool =================================================================== --- trunk/tools/eam/reprocess/unions.dr2.20190430/run.staticskytool (revision 40818) +++ trunk/tools/eam/reprocess/unions.dr2.20190430/run.staticskytool (revision 40818) @@ -0,0 +1,62 @@ +#!/bin/csh -f + +if ($#argv != 1) then + echo "USAGE: run.staticskytool [commit]" + exit 2 +endif + +if ("$1" == "commit") then + set pretend = "" +else + set pretend = "-pretend" +endif + +set inlabel = "UNIONS.DR2.20190430" +set outlabel = "UNIONS.DR2.20190430" + +set common_opts = "" +set common_opts = "$common_opts -dbname gpc1" +set common_opts = "$common_opts -definebyquery" +set common_opts = "$common_opts -set_workdir neb://@HOST@.0/gpc1/UNIONS.DR2.20190430.STATICSKY" +set common_opts = "$common_opts -set_label $outlabel" +set common_opts = "$common_opts -set_data_group $outlabel" +set common_opts = "$common_opts -set_dist_group $outlabel" +set common_opts = "$common_opts -set_reduction STACKPHOT_EUCLID" + +set common_opts = "$common_opts -select_label $inlabel" +# set common_opts = "$common_opts -ra_min 320" +# set common_opts = "$common_opts -ra_max 340" +set common_opts = "$common_opts -simple" + +# for UNIONS DR2, we only have i and z filters: +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter i.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter z.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter z.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter z.00000 +# staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter r.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter i.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter z.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter r.00000 -select_filter i.00000 +# staticskytool $pretend $common_opts -select_filter r.00000 -select_filter z.00000 +# staticskytool $pretend $common_opts -select_filter r.00000 -select_filter y.00000 +staticskytool $pretend $common_opts -select_filter i.00000 -select_filter z.00000 +# staticskytool $pretend $common_opts -select_filter i.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter z.00000 -select_filter y.00000 +# staticskytool $pretend $common_opts -select_filter g.00000 +# staticskytool $pretend $common_opts -select_filter r.00000 +staticskytool $pretend $common_opts -select_filter i.00000 +staticskytool $pretend $common_opts -select_filter z.00000 +# staticskytool $pretend $common_opts -select_filter y.00000