Index: /trunk/ppImage/test/ipprc.config
===================================================================
--- /trunk/ppImage/test/ipprc.config	(revision 6088)
+++ /trunk/ppImage/test/ipprc.config	(revision 6089)
@@ -21,10 +21,8 @@
 LOGDEST	STR	STDOUT				# Log destination
 TRACE		METADATA			# Trace levels
-	mosaicChip		S32	10
-	p_pmImageMosaic		S32	10
-	ppImageLoop		S32	10
-	ppImageLoadPixels	S32	10
-	pmSubtractBias		S32	10
-	pmFPAPrint		S32	10
+#	ppImageLoop		S32	10
+#	ppImageLoadPixels	S32	10
+#	pmSubtractBias		S32	10
+#	pmFPAPrint		S32	10
 #	psModule.concepts	S32	10
 #	pmFPAWrite		S32	10
Index: /trunk/ppImage/test/megacam_splice.config
===================================================================
--- /trunk/ppImage/test/megacam_splice.config	(revision 6089)
+++ /trunk/ppImage/test/megacam_splice.config	(revision 6089)
@@ -0,0 +1,137 @@
+# The spliced MecaCam data is stored in single extensions for each chip
+
+# How to recognise this type
+RULE	METADATA
+	TELESCOP	STR	CFHT 3.6m
+	DETECTOR	STR	MegaCam
+	EXTEND		BOOL	T
+	NEXTEND		S32	36
+END
+
+# How to read this data
+PHU		STR	FPA	# The FITS file represents an entire FPA
+EXTENSIONS	STR	CHIP	# The extensions represent chips
+
+# What's in the FITS file?
+CONTENTS	METADATA
+	# Extension name, components
+	ccd00		STR	left right
+	ccd01		STR	left right
+	ccd02		STR	left right
+	ccd03		STR	left right
+	ccd04		STR	left right
+	ccd05		STR	left right
+	ccd06		STR	left right
+	ccd07		STR	left right
+	ccd08		STR	left right
+	ccd09		STR	left right
+	ccd10		STR	left right
+	ccd11		STR	left right
+	ccd12		STR	left right
+	ccd13		STR	left right
+	ccd14		STR	left right
+	ccd15		STR	left right
+	ccd16		STR	left right
+	ccd17		STR	left right
+	ccd18		STR	left right
+	ccd19		STR	left right
+	ccd20		STR	left right
+	ccd21		STR	left right
+	ccd22		STR	left right
+	ccd23		STR	left right
+	ccd24		STR	left right
+	ccd25		STR	left right
+	ccd26		STR	left right
+	ccd27		STR	left right
+	ccd28		STR	left right
+	ccd29		STR	left right
+	ccd30		STR	left right
+	ccd31		STR	left right
+	ccd32		STR	left right
+	ccd33		STR	left right
+	ccd34		STR	left right
+	ccd35		STR	left right
+END
+
+# Specify the cells
+CELLS		METADATA
+	left		METADATA
+		CELL.BIASSEC.SOURCE	STR	HEADER
+		CELL.TRIMSEC.SOURCE	STR	HEADER
+		CELL.BIASSEC		STR	BSECA
+		CELL.TRIMSEC		STR	TSECA
+		CELL.X0			S32	0
+	END
+
+	right		METADATA
+		CELL.BIASSEC.SOURCE	STR	HEADER
+		CELL.TRIMSEC.SOURCE	STR	HEADER
+		CELL.BIASSEC		STR	BSECB
+		CELL.TRIMSEC		STR	TSECB
+		CELL.X0			S32	1024
+	END
+END
+
+# How to translate PS concepts into FITS headers
+TRANSLATION	METADATA
+        FPA.NAME        STR     EXPNUM
+        FPA.AIRMASS     STR     AIRMASS
+        FPA.FILTER      STR     FILTER
+        FPA.POSANGLE    STR     ROTANGLE
+        FPA.RA          STR     RA
+        FPA.DEC         STR     DEC
+        FPA.RADECSYS    STR     RADECSYS
+        CELL.EXPOSURE   STR     EXPTIME
+        CELL.DARKTIME   STR     DARKTIME
+        CELL.GAIN       STR     GAIN
+        CELL.READNOISE  STR     RDNOISE
+        CELL.SATURATION STR     SATURATE
+	CELL.TIME	STR	MJD-OBS
+        CELL.XBIN       STR     CCDBIN1
+        CELL.YBIN       STR     CCDBIN2
+END
+
+# Default PS concepts that may be specified by value
+DEFAULTS        METADATA
+	CELL.READDIR		S32	1		# Cell is read in x direction
+        CELL.BAD                S32     0
+	CELL.TIMESYS		STR	UTC
+	CELL.XPARITY		S32	1
+	CELL.YPARITY		S32	1
+	CELL.Y0			S32	0
+END
+
+
+# How to translation PS concepts into database lookups
+DATABASE	METADATA
+	TYPE		dbEntry		TABLE		COLUMN		GIVENDBCOL	GIVENPS
+#	CELL.GAIN	dbEntry		Camera		gain		chipId,cellId	CHIP.NAME,CELL.NAME
+#	CELL.READNOISE	dbEntry		Camera		readNoise	chipId,cellId	CHIP.NAME,CELL.NAME
+
+# A database entry refers to a particular column (COLUMN) in a
+# particular table (TABLE), given certain PS concepts (GIVENPS) that
+# match certain database columns (GIVENDBCOL).
+END		
+
+
+# Where there might be some ambiguity, specify the format
+FORMATS		METADATA
+	FPA.RA		STR	HOURS
+	FPA.DEC		STR	DEGREES
+	CELL.TIME	STR	MJD
+END
+ 
+# Recipe options
+RECIPES		METADATA
+	PHASE2		STR	phase2.config		# Phase 2 recipe details
+END
+ 
+
+# How to get the supplementary stuff: mask and weight
+SUPPLEMENTARY	METADATA
+	MASK.SOURCE	STR	FILE		# Source type for mask: EXT | FILE
+	MASK.NAME	STR	%a_mask.fits	# Name for mask extension or filename
+	WEIGHT.SOURCE	STR	FILE		# Source type for weight: EXT | FILE
+	WEIGHT.NAME	STR	%a_weight.fits	# Name for weight extension or filename
+END
+
Index: /trunk/ppImage/test/phase2.config
===================================================================
--- /trunk/ppImage/test/phase2.config	(revision 6088)
+++ /trunk/ppImage/test/phase2.config	(revision 6089)
@@ -4,7 +4,7 @@
 MASK		BOOL	FALSE		# Mask bad pixels
 NONLIN		BOOL	FALSE		# Non-linearity correction
-BIAS		BOOL	FALSE		# Bias subtraction
+OVERSCAN	BOOL	TRUE		# Overscan subtraction
+BIAS		BOOL	TRUE		# Bias subtraction
 DARK		BOOL	FALSE		# Dark subtraction
-OVERSCAN	BOOL	TRUE		# Overscan subtraction
 FLAT		BOOL	TRUE		# Flat-field normalisation
 FRINGE		BOOL	FALSE		# Fringe subtraction