= These are Heather's notes (and status) for SAS37 / ipptopsps =

== build of minis ==

 This was done with minimal problems.  Addstar ff/ sky had problems initially, Gene put in fixes for that.  The faults that I have in the minis (only a handful of faults) are related to cluster / gpc1 problems. Rather than sort them out, I left those few exposures out. It's not complete (to ~10 exposures).

The labels and associated minis:

|| stage  || label || mini ||
|| cam   || SAS.20141118 || SAS.20141118.cam ||
||sky     || SAS.20141118.rerun.V3 || SAS.20141118.sky.rerun.V3 ||
||fullforce || SAS.20141118.rerun.V3 || SAS.20141118.ff.rerun.V3 ||
||diff ||SAS.20141118 || SAS.20141118.diff || 

== merge of SAS ==

Merge had problems, I retried 3 time with parallel then hacked it to not be parallel (and then it worked). The merged dvodb names have .V5 because that's the 5th total attempt to do this.

||Name  || minis  || order ||
||SAS.20141118.diff.V5||SAS.20141118.diff || 1||
||SAS.20141118.V5 ||SAS.20141118.sky.rerun.V3 || 1 ||
||SAS.20141118.V5 ||SAS.20141118.cam || 2 ||
||SAS.20141118.V5 ||SAS.20141118.ff.rerun.V3 || 3||

== calibration of SAS ==

See SAS37 calibration wiki

SAS37CalibrationHeatherNotes

== creation of datastores ==

SAS37

{{{
dsprodtool --add PSPS_SAS37_IN --type IPP-PSPS --description 'PSPS SAS37 IN'
dsprodtool --add PSPS_SAS37_OB --type IPP-PSPS --description 'PSPS SAS37 OB'
dsprodtool --add PSPS_SAS37_P2 --type IPP-PSPS --description 'PSPS SAS37 P2'
dsprodtool --add PSPS_SAS37_ST --type IPP-PSPS --description 'PSPS SAS37 ST'
dsprodtool --add PSPS_SAS37_FO --type IPP-PSPS --description 'PSPS SAS37 FO'
dsprodtool --add PSPS_SAS37_FW --type IPP-PSPS --description 'PSPS SAS37 FW'

}}}


SAS37Diff

{{{
dsprodtool --add PSPS_SAS37_DIFF_IN --type IPP-PSPS --description 'PSPS SAS37 Diff IN'
dsprodtool --add PSPS_SAS37_DIFF_DO --type IPP-PSPS --description 'PSPS SAS37 Diff DO'
dsprodtool --add PSPS_SAS37_DIFF_DF --type IPP-PSPS --description 'PSPS SAS37 Diff DF'
}}}

== status of SAS37 ready for psps ==

||dvodb || datastore || batches || comments ||
||SAS37 / SAS.20141118.V5 || PSPS_SAS37_IN || 1    || IN batch ||
||SAS37 / SAS.20141118.V5 || PSPS_SAS37_OB ||     || currently loading||
||SAS37 / SAS.20141118.V5 || PSPS_SAS37_P2 ||     || ||
||SAS37 / SAS.20141118.V5|| PSPS_SAS37_FW ||    ||  ||
||SAS37 / SAS.20141118.V5 || PSPS_SAS37_FO ||     || ||
||SAS37 / SAS.20141118.V5|| PSPS_SAS37_ST ||     ||  ||
||SAS37Diff / SAS.20141118.diff.V5 || PSPS_SAS37_DIFF_IN || 1    || IN Batch ||
||SAS37Diff  / SAS.20141118.diff.V5 || PSPS_SAS37_DIFF_DO ||     ||  ||
||SAS37Diff  / SAS.20141118.diff.V5 || PSPS_SAS37_DIFF_DF ||     ||  ||

== queue of SAS37 ==

located in '~heather/queueLoaders/SAS.loaders.newschema/createSAS37.pl', I have queued up the following:

* 851 OB
* 620 P2
* 612 ST
* 206 (??) DO
* 23224 DF
== ipptopsps progress ==

I am nearly done with FW/FO stuff, the other batches have been done and tested. 

Example batches that I tested:

 * 9196 --> DO Batch 
 * 9200 --> DF Batch 
 * 9065 --> ST Batch 
 * 9067 --> P2 Batch 
 * 9192 --> OB Batch 

I opened each batch in topcat and checked that the columns were mostly sensible and investigated 0's or -999s as necessary

=== DO Batch ===
* DiffObject
  * skycellID = -1 (not sure what it should be)
  * ra/dec err = -999
  * qfPerfect not by filter (H: need to fix)
  * ng/nr/ni/nz/ny = 0 (H: need to investigate)

=== DF Batch ===
 * DiffMeta
   * magSat = 0. (???)
 * DiffToImage 
   * has 60 chips... (H: needs to select only the chips , see how Stacks do this)
 * DiffDetection
   * telluricExt = 0 (this is in the dvo)
   * momentM3*/M4* = -999 (not in cmf)
   * appFillF = -999 (not in cmf)
   
=== P2 Batch ===
 * FrameMeta (ok!)
 * ImageMeta 
    * magSat =0
    * completMag =0
    * psfModelID = -999
 * Detection
    * posAngle = -999
    * extNSigma = -999 (H: I put this in here, but do we calculate it for camera?)
    * zp changes in a funny pattern (it looks like each chip is cut into 4 quarters, each quarter a different zp)
   * psfMajorFWHM = -999
   * psfMinorFWHM = -999
   * psfCore = -999
   * apFlux/apFluxErr/appFillF = 0

=== OB Batch ===
 * ObjectThin
  * nStackObjectRows = 0 (not sure if this is just for this batch or for all)
 * MeanObject (ok!)

=== ST Batch ===
(this batch was a lucky batch that only had one filter (near the edge) - so I only checked z filter)
 * StackMeta
   * magSat, completMag, astroScat,photoScat, nAstro, nPhoRef, calibmodnum = -999
 * StackObjectThin
   * bestDetection = -999
 * StackObjectAttributes
   * bestDetection = -999
   * zExtNSigma = -999 
 * StackModelFitExp
  * stackDetectRowID = -999
  * bestDetection = -999
  * zexpRadiusErr, zExpAbErr, zExpPhiErr, zExpCf = -999
 * StackModelFitDev
  * stackDetectRowID = -999
  * bestDetection = -999
  * zDevRadiusErr, zDevAbErr, zDevPhiErr, zDevCf = -999
 * StackModelFitSer
  * stackDetectRowID = -999
  * bestDetection = -999
  * zSerRadiusErr, zSerAbErr, zSerPhiErr, zSerCf = -999
 * StackPetrosian 
  * stackDetectRowID = -999
  * bestDetection = -999
 * StackApFlx
  * stackDetectRowID = -999
  * bestDetection = -999
 * StackApFlxEGUnc
  * stackDetectRowID = -999
  * bestDetection = -999
  * apertures 6-10 unfilled
 * StackApFlxEGCon6
  * stackDetectRowID = -999
  * bestDetection = -999
  * apertures 6-10 unfilled
 * StackApFlxEGCon8
  * stackDetectRowID = -999
  * bestDetection = -999
  * apertures 6-10 unfilled

stackDetectRowID is clearly something I missed, that's easy to fix.  

best Detection, is it set?

apertures 6-10 unfilled strikes me as odd (I need to investigate)
 
the errors in the models - are these set?
== Things I still need to fix ==
 * stacks
  * number of apertures (from 10 to 9)
  * aperture metadata
 * fullforce detections
 * fullforce objects