| Version 60 (modified by , 14 years ago) ( diff ) |
|---|
Hardware bugs
- #1298 Suspect bad memory
- #1299 Verify that MCE is enabled in the BIOS of all wave #2 nodes
- #1300 Configure the firewall services module in IPP core
- #1301 Figure out why alala can't rebuild it's raid set
- #1302 Test bonding on master.ipp
- #1303 Figure out why ippdb02 crashes when the array verification runs
- #1304 ipp000 has a dead CPU socket
- #1305 Security issue: the kernel on all nodes needs to be upgraded to 2.6.30.x
- #1306 2nd PDU in cab3 needs to be installed
- #1307 Where is ippdb00?
- #1308 Fix dead disk bays
- #1309 Update kernel + OS image on all MHPCC nodes
- #1310 Find fan modules for ipp037
- Production Cluster Status
- Production Cluster Logs
- Nebulous Volume Logs
- Production Cluster Device Map
- Production Cluster Ganglia (performance monitor)
- Development Cluster Status
- Development Cluster Logs
- Development Cluster Device Map
- Development Cluster Ganglia (performance monitor)
- Development Cluster Uses
- IPP Host Port Forward Table : SSH Config entries to simplify access to IPP machines with private IP addresses
- HowTo: Clearing NFS Hang-ups
- Wave4 Task List
- Alala disk sled -> RAID port map
- Poma disk sled -> RAID port map
- Gentoo Image Update Profile 10.0
- Gentoo Image Update
- Spare Disk Stockpile @ MHPCC
- HowTo: Areca Array Verification
- HowTo: Install console utility
- Linux sysctl's for GigE TCP/IP
- Install 3Ware 9690SA RAID card from a Linux 2.6.22 boot cd
- Gentoo Stage 4 build
- The IPP Gentoo portage configuration and overlay
- The IPP nodes configuration file management system
- nebdiskd alert emails
- Catalyst ISOs
- HowTo: Check raid status
Useful docs
- 802.3ad (LACP) ethernet link aggregation
- textex -> texlive migration http://www.gentoo.org/proj/en/tex/texlive-migration-guide.xml
MHPCC Address and Phone Numbers
Maui High Performance Computing Center 550 Lipoa Parkway Kihei, Maui, HI 96753
Telephone: (808) 879-5077 Fax: (808) 879-5018
MHPCC Computer Room: (808) 879-5077 ext. 318
Email: mhpcc-help@mhpcc.hpc.mil * Primary point of contact is Brad Thomas brad.thomas.ctr@mhpcc.hpc.mil * Secondary POC is Eddie Domingo eddie.domingo.ctr@mhpcc.hpc.mil * OLD From 2009-08-1 -> -10, POC is Steve Gima gima@mhpcc.hpc.mil * Manager is Lance Terada lancer@mhpcc.hpc.mil
Vendors
ASA Computers http://www.asaservers.com/showpages.asp?pid=1268
Point of sales contact is: Alok K Srivastav <alok@…>
ASA Computers Inc. 645 National Ave Mountain View, CA 94043 Phone: 650-230-8000 Toll Free: 1-800-REAL-PCS FAX: 650-230-8090 Sales E-mail: sales@asacomputers.com tech support: tech1@asacomputers.com 6-9 AM PST Tech support number: 650-230-8050 8-5 PM PST Tech support number: 650-230-8020 Customer Service: cs@asacomputers.com
IPP Wave #2 YMI/Rackmountpro http://www.rackmountpro.com/contactus.aspx
Sales point of contact is Patrick Lam <patrick@…>.
Sales/Product/Order Inquiry Hours: M-F 8:30AM - 5:30PM PST Tel: (800) 526-8650 Fax: (626) 956-0098 sales@rackmountpro.com Technical Support Hours: M-F 8:30AM - 5:30PM PST Tel: (800) 526-8650 support@rackmountpro.com
IPP wave #3 DB machines
Mike Martin - Senior Account Executive Aberdeen LLC 562-699-6998 or 800-552-6868 ext 142 / 562-695-5570 Fax mikem@aberdeeninc.com / http://www.aberdeeninc.com
IPP Production Cluster Hardware
Note: Wave1 of the cluster has been upgraded. The following describes the current configuration.
The IPP Production Cluster currently has 66 storage nodes, 3 database nodes, 69 compute nodes (138 total) with the following configuration:
Storage Nodes
- 18 ASA 5U Chenbro RM5U51924B Chassis (wave1 - refurbished)
- Dual Quad-core Intel(R) Xeon(R) CPU E5620 @ 2.40GHz
- 12M L3 cache
- 24GB DDR3-1333 RAM
- 40TB RAID6 ext3 root partition and xfs local storage /export/ippXXX.0
- Areca 1280ML SATAII Raid Controller
- Gentoo Base System release 1.12.11.1 (IPP 2008.0 release)
- Linux 2.6.28-rc7-00105-gfeaf384
- 15 YMI 5U Chenbro RM5U51924B Chassis (wave2)
- Dual Quad-Core Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
- 2 x 6MB L2 cache
- 32GB DDR2-800 RAM
- 20TB RAID6 ext3 root partition and xfs local storage /export/ippXXX.0
- Areca 1280ML SATAII Raid Controller
- Gentoo Base System release 1.12.11.1 (IPP 2008.0 release)
- Linux 2.6.28-rc7-00105-gfeaf384
- 16 ASA 5U Chenbro RM5U51924B Chassis (wave3)
- Dual Quad-Core Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
- 2 x 6MB L2 cache
- 32GB DDR2-800 RAM
- 20TB RAID6 ext3 root partition and xfs local storage /export/ippXXX.0
- 3ware 9650SE-24 SATAII Raid Controller
- Gentoo Base System release 1.12.11.1 (IPP 2008.0 release)
- Linux 2.6.28-rc7-00105-gfeaf384
- 13 YMI 5U Chenbro RM5U51924B (YM5U52624) (wave4)
- Dual Six-core Intel(R) Xeon(R) CPU X5650 @ 2.67GHz
- 12M L3 cache
- 48GB DDR3-1333 RAM
- 40TB RAID6 ext3 root partition and xfs local storage /export/ippXXX.0
- LSI MegaRAID 9280-24i4e SATAIII Raid Controller
- Gentoo Base System release 1.12.11.1 (IPP 2008.0 release)
- Linux 2.6.34.4
- 10 Aspen 2U + 4U JBOD Supermicro (wave6 - STScI) deployment scheduled for June (6th) - (8th), 2012
- Dual Six-core Intel(R) Xeon(R) CPU E5645 @ 2.40GHz
- 12M L3 cache
- 48GB DDR3-1333 RAM
- 4 x 120GB RAID5 (2 + 1) + 1 hot spare ext3 system
- 3 x 33TB RAID6 (12 + 2) + 3 hot spares ext4 local storage /export/stsciXX.0, stsciXX.1, stsciXX.2 (total storage: 99TB)
- LSI MegaRAID 9260-4i and 9280-8e SATA/SAS Raid Controller
- Gentoo Base System release 1.12.11.1 (IPP 2008.0 release)
- Linux 2.6.34.4
- 4 YMI 8U Chenbro RM8U8074 Chassis (storage archive @ ATRC)
- Dual Six-core Intel(R) Xeon(R) CPU X5650 @ 2.67GHz
- 12M L3 cache
- 24GB DDR3-1333 RAM
- 2TB ext3 root partition
- 3 x 40TB RAID6 xfs local storage /export/ippdbXX.[0,1,2]
- 3ware 9650SE-2LP SATAII Raid Controller
- Gentoo Base System release 2.0.1 (IPP 2010.0 release)
- Linux 2.6.34.4
Database Nodes
- 3 Aberdeen 3U Chenbro RM3U Chassis (wave3)
- Dual Quad-Core Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
- 2 x 6MB L2 cache
- 32GB DDR2-800 RAM
- 1.9TB RAID6 ext3 root partition and xfs local storage /export/ippdbXX.0
- 3ware 9690SA-8I SAS/SATAII Raid Controller
- Gentoo Base System release 1.12.11.1 (IPP 2008.0 release)
- Linux 2.6.28-rc7-00105-gfeaf384
Compute Nodes
- 20 ASA 1U Chenbro RM1U1426 Chassis (wave3)
- Dual Quad-Core Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
- 2 x 6MB L2 cache
- 32GB DDR2-800 RAM
- 500GB SW RAID1 ext3 root partition and local storage /export/ippcXX.0
- Gentoo Base System release 1.12.11.1 (IPP 2008.0 release)
- Linux 2.6.28-rc7-00105-gfeaf384
- 15 YMI 1U Chenbro RM1U1426 Chassis (wave4)
- Dual Six-core Intel(R) Xeon(R) CPU X5650 @ 2.67GHz
- 12M L3 cache
- 24GB DDR3-1333 RAM
- 1TB RAID1 ext3 root partition and local storage /export/ippcXX.0
- Gentoo Base System release 1.12.11.1 (IPP 2008.0 release)
- Linux 2.6.28-rc7-00105-gfeaf384
- 34 YMI 1U Chenbro RM1U1426 Chassis (wave5)
- Dual Six-core Intel(R) Xeon(R) CPU X5650 @ 2.67GHz
- 12M L3 cache
- 48GB DDR3-1333 RAM
- 4 x 3TB HDD's
- 2 x 3TB RAID1 ext3 root partition and local storage /export/ippcXX.0
- 2 x 3TB RAID0 ext3 (additional) local storage /export/ippcXX.1
- Gentoo Base System release 1.12.11.1 (IPP 2008.0 release)
- Linux 2.6.28-rc7-00105-gfeaf384
Note:
See TracWiki
for help on using the wiki.
