Changes between Version 35 and Version 36 of PS1_IPP_Czarlog_20120716

Timestamp:

Jul 19, 2012, 10:11:01 PM (14 years ago)

Author:

Mark Huber

Comment:

--

PS1_IPP_Czarlog_20120716

@@ -83 +83 @@
  * 12:40 turning up processing on LAP diffs (all to run in stdscience, set.poll 500 -2x compute3 -2x stare) and SAS+LAP stacking (adding 1x compute3, -1x stare overloaded, +1x wave3, -1x compute2 to accomodate ecliptic pantasks)
   * LAP diffs moving through and triggering more chips. turning chip.revert off since processing balance manually setup to move stacks+diffs through
-
  * 21:10 ippc17 high load, restarting pstamp and update
-
- * xx:xx stdscience and stack will need to be restarted once SAS stacks and LAP diffs are finished (~19:00).
- * xx:xx Chris suspects the warp stage/stsci load trouble is due to the ecliptic not having @HOST@ in the workdir.  LAP runs do have this defined so once chips are turned back on will be able to verify.
- * xx:xx watch out for when the ecliptic chips finish and all nodes go to warp in ecliptic pantasks (~20:00)
+ * 19:30 stdscience and stack restarted once SAS stacks and LAP diffs finished. Tried boosting stack processing but chip/warp processing irregular so restarting stdscience+stack.
+ * 22:00 Chris suspects the warp stage/stsci load trouble is due to the ecliptic not having @HOST@ in the workdir.  LAP runs do have this defined, with 300 warps running only see some load spikes, rarely >20-30 and clear quickly. 
+ * xx:xx watch out for when the ecliptic chips finish and all nodes go to warp in ecliptic pantasks (~23:00)
 === Friday : 2012.07.20 ===