| | 19 | * nominal Temp to monitor -- |
| | 20 | {{{ |
| | 21 | -- ipp002 -- |
| | 22 | Core0 Temp: |
| | 23 | +44 C |
| | 24 | Core1 Temp: |
| | 25 | +47 C |
| | 26 | temp1: +41 C (high = +4 C, hyst = +16 C) sensor = thermistor ALARM |
| | 27 | temp2: +43.5 C (high = +80 C, hyst = +75 C) sensor = thermistor |
| | 28 | temp3: +43.0 C (high = +80 C, hyst = +75 C) sensor = thermistor |
| | 29 | |
| | 30 | -- ippops1 -- |
| | 31 | temp1: +36.8 C (high = +100.0 C, hyst = +95.0 C) sensor = Intel PECI |
| | 32 | temp2: -128.0 C (high = +100.0 C, hyst = +95.0 C) sensor = thermal diode |
| | 33 | temp5: +40.0 C (high = +100.0 C, hyst = +95.0 C) sensor = thermistor |
| | 34 | temp6: +41.0 C (high = +100.0 C, hyst = +95.0 C) sensor = thermistor |
| | 35 | |
| | 36 | -- ippops2 -- |
| | 37 | temp1: +35.8 C (high = +100.0 C, hyst = +95.0 C) sensor = Intel PECI |
| | 38 | temp2: -128.0 C (high = +100.0 C, hyst = +95.0 C) sensor = thermal diode |
| | 39 | temp5: +39.0 C (high = +100.0 C, hyst = +95.0 C) sensor = thermistor |
| | 40 | temp6: +40.0 C (high = +100.0 C, hyst = +95.0 C) sensor = thermistor |
| | 41 | }}} |
| | 42 | |
| | 45 | * the ones doing this need to monitor the level of nebulous replication slippage (looks like ~1700,3900/hr) and adjust it accordingly if gets behind during nightly processing |
| | 46 | * MEH: Haydn work at ITC |
| | 47 | * ipp081 back up again -- leave neb-host down for day or so and then put into repair only until have remote power access |
| | 48 | * ipp090,091 rebooted to report number of CPU properly (12 not 24) -- ipp091 raid card is dead, new ones ordered and will arrive in week or two |
| | 49 | * ippdb05 needs new BBU -- wait until Monday |
| | 50 | * ipp085,086,089 also need BBU but wait until db05 replaced next week |
| | 51 | * MEH: ipp116.0 has gpc1 DB replication and <1TB free space.. -- should have been put into repair a while ago... |