IPP Software Navigation Tools IPP Links Communication Pan-STARRS Links

Changes between Version 1 and Version 2 of PS1_IPP_Czarlog_20190524


Ignore:
Timestamp:
May 24, 2019, 3:25:01 PM (7 years ago)
Author:
fairlamb
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • PS1_IPP_Czarlog_20190524

    v1 v2  
    1414
    1515Go to  the following to check the status of the PDUs in i06, the cabient with most of the xnodes:
    16 https://itc-i06-con.ifa.hawaii.edu/
     16**SEE EMAIL FROM 20190515 FOR URL**
    1717Then : Applications -> IPDU Power Mgmt -> View IPDUs Info
    1818
     
    180180
    181181'''Updates'''
     182Updates still need doing, so far the last label is: {{{LAP.PV3.20140730.20150%}}}.
    182183
    183184'''wait cleaning '''
    184 
    185 ''' general cleaning '''
     185See last weeks handover notes
     186
     187''' general update cleaning '''
     188We've hit around 20k, so now would be a good time to clean up some chips. See last weeks handover notes
    186189
    187190''' ippx node power draw'''
     191As mentioned today there are still some power draw issues, choices are:
     192 * monitor ippx node power usage while nightly processing is going on -> remove nodes from stdscience processing if the load is too high (the nodes appear to correspond to the PDU circuits descending on the page and descending on the ITC cabinet sheet -- I'll get Haydn to clarify).
     193
    188194
    189195''' PS1 pointing '''
     196Keep an eye on the pointing using the commands listed in last weeks czarlog (under misaligned visits heading).
     197If they look bad tell ps-obs and Ken, as they should be better than a week ago due to a new pointing model.
    190198
    191199''' PS2 pointing '''
     200Watch out for very poor pointing, worth mentioning to people too and it may cause WSdiff issues in the morning (WSdiffs are currently only processed in the morning now).
     201
     202
     203''' Euclid Bright Twi reprocess '''
     204There are some Euclid observations that have not been processed as they have a comment string with a different format (the config has now been changed so they should process automatically). The Euclid observations under the new format, and before the config change, will need to be reprocessed. See last weeks czar log for the command, and make sure the date in the chiptool command is the date are of the observation (compare with the previous Euclid bright twi observations that have been done before the comment change).
    192205
    193206