Changes between Version 3 and Version 4 of PS1_IPP_Czarlog_20190524
- Timestamp:
- May 24, 2019, 3:27:40 PM (7 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
PS1_IPP_Czarlog_20190524
v3 v4 6 6 7 7 8 == Czar Handover == from JRF -> CCL 9 10 '''Updates''' 8 === Friday : 2019.05.24 === 9 10 '''Czar Handover''' from JRF -> CCL 11 12 '''Updates''' 11 13 Updates still need doing, so far the last label is: {{{LAP.PV3.20140730.20150%}}}. 12 14 13 '''wait cleaning '''15 '''wait cleaning ''' 14 16 See last weeks handover notes 15 17 16 ''' general update cleaning '''18 ''' general update cleaning ''' 17 19 We've hit around 20k, so now would be a good time to clean up some chips. See last weeks handover notes 18 20 19 ''' ippx node power draw'''21 ''' ippx node power draw''' 20 22 As mentioned today there are still some power draw issues, choices are: 21 23 * monitor ippx node power usage while nightly processing is going on -> remove nodes from stdscience processing if the load is too high (the nodes appear to correspond to the PDU circuits descending on the page and descending on the ITC cabinet sheet -- I'll get Haydn to clarify). 22 24 23 25 24 ''' PS1 pointing '''26 ''' PS1 pointing ''' 25 27 Keep an eye on the pointing using the commands listed in last weeks czarlog (under misaligned visits heading). 26 28 If they look bad tell ps-obs and Ken, as they should be better than a week ago due to a new pointing model. 27 29 28 ''' PS2 pointing '''30 ''' PS2 pointing ''' 29 31 Watch out for very poor pointing, worth mentioning to people too and it may cause WSdiff issues in the morning (WSdiffs are currently only processed in the morning now). 30 32 31 33 32 ''' Euclid Bright Twi reprocess '''34 ''' Euclid Bright Twi reprocess ''' 33 35 There are some Euclid observations that have not been processed as they have a comment string with a different format (the config has now been changed so they should process automatically). The Euclid observations under the new format, and before the config change, will need to be reprocessed. See last weeks czar log for the command, and make sure the date in the chiptool command is the date are of the observation (compare with the previous Euclid bright twi observations that have been done before the comment change). 34 36 35 37 36 === Friday : 2019.05.24 === 37 38 39 '''ippx nodes power draw'''by JRF 38 39 40 '''ippx nodes power draw'''by JRF 40 41 41 42 Last week the xnodes were redistributed so that they could handle the heat better (a gap was left between each one). This helped the heat issue but we uncovered an issue with too much power being used by the machines.
