| | 1 | = 2010 Production Node Work = |
| | 2 | |
| | 3 | == April 1 == |
| | 4 | |
| | 5 | * ipp008 |
| | 6 | * Put back into rack |
| | 7 | * Still missing single HD array fan |
| | 8 | |
| | 9 | * ipp018 |
| | 10 | * New motherboard; 2 new CPU fans (Sunon) |
| | 11 | * Put back in rack |
| | 12 | |
| | 13 | * ipp037 |
| | 14 | * New motherboard; 2 new CPU fans (Sunon) |
| | 15 | * Put back in rack |
| | 16 | * Array cables not mapped to RAID card correctly |
| | 17 | |
| | 18 | * ipp014 |
| | 19 | * Unsuccessfully attempted to get one of the HD array duo fans working |
| | 20 | * Appears to be an issue with the connector |
| | 21 | |
| | 22 | == March 22 == |
| | 23 | |
| | 24 | * ipp018 |
| | 25 | * Boots but goes to A:\> |
| | 26 | * Pulled CMOS battery; reset MB w/ jumper; no help |
| | 27 | |
| | 28 | * ipp008 |
| | 29 | * No boot |
| | 30 | * Rapid beeps |
| | 31 | * One pwr supply dead |
| | 32 | * Swapped in new MB |
| | 33 | * Replaced CPU fans with those taken from ipp037 |
| | 34 | * Single HD array fan not working (appears to be module connector) |
| | 35 | |
| | 36 | |
| | 37 | == February 22 == |
| | 38 | |
| | 39 | * Confirmed light on ippc17 drive |
| | 40 | * Installed additional fan in ippc18 (small fan on right side) |
| | 41 | |
| | 42 | == February 16 == |
| | 43 | |
| | 44 | * ipp008 |
| | 45 | * No boot |
| | 46 | * rapid beeps -> then 1 sec beep |
| | 47 | |
| | 48 | * ipp018 |
| | 49 | * No boot |
| | 50 | * Both CPU fans not working - one has broken wire |
| | 51 | * No codes on MB |
| | 52 | * No lights on power supplies |
| | 53 | |
| | 54 | * ipp037 |
| | 55 | * No RAID card |
| | 56 | * CPUs installed w/o paste |
| | 57 | |
| | 58 | == February 11 == |
| | 59 | |
| | 60 | * Installed an additional fan in ippc19 (small fan on right side) |
| | 61 | * Swapped CPUs |
| | 62 | * ipp018 -> ipp005 |
| | 63 | * ipp037 -> ipp008 |
| | 64 | * Notes: ipp018 had excessive paste, bent pins on CPU2 (on MB), and an apparently scorched heatsink |
