Changes between Version 71 and Version 72 of Production_Work_Log

Timestamp:

Apr 17, 2013, 12:48:15 PM (13 years ago)

Author:

rmattson

Comment:

--

Production_Work_Log

@@ -3 +3 @@
 = 2013 Production Node Work =
 
-== Apr 16 (Rita & Haydn)
+== Apr 17 (Rita) ==
+
+ - ippc07 wasn't working at 1GB as the other servers on the new 48 port switch. It was working at 100MB.  Discovered that the cable C7N2S0 was bad.  Labeled the cable as bad and swapped with the C7N2S1 cable, which is now in ethernet port 0.
+ - ippc13 -checked on the memory check that Haydn had started 4/16/13.  Looked as if the memory check ran without errors but I couldn't reboot from the monitor.  Tried to power cycle the server many times but it wouldn't start up.  Strangely it seemed to power up on it's own?! Gavin was then able to see it on the serial console and  configured it to boot from the RAID disk. Haydn to do more checking on this server to see if the new memory just added could be faulty.
+
+
+== Apr 16 (Rita & Haydn) ==
  - ipp064 - Replaced the LSI RAID BBU.  Now write-thru caching is working again.
  - ipp057 - Replaced failed drive 19.
@@ -19 +25 @@
  - Rita to box up all equipment for IU and mail back to IU from ATRC, ASAP
 
+== Apr 10 (Rita) ==
+
  - Worked on ippdb00 and swapped out the 300GB disks for new 600GB disks.  Reconfigured the RAID array, and handed over the OS rebuild to Gavin and Haydn to perform remotely.  All came up fine and IPP team was notified that afternoon that they could proceed.
  - While there, Gene and team updated stsci06 with ver 3.6.7 of kernel remotely and reboot.  From what I could see manually all seemed fine when system came back online.