Changes between Version 8 and Version 9 of STS.refstack.20120510

Timestamp:

May 31, 2012, 11:02:17 AM (14 years ago)

Author:

Mark Huber

Comment:

--

STS.refstack.20120510

@@ -50 +50 @@
 = Refstack = 
 
-Reference stack using data from 2011 only, a balance of N input warps versus best seeing, excluding exposures with large background, low zeropoints. 
+Reference stack using data from 2011 only, a balance of N input warps versus best seeing, excluding exposures with large background, low zeropoints, large elongation. 
 
 Chip->Warp processing: doing selected sample to use in the refstack only
@@ -94 +94 @@
   * STS.reftest.201204xx.2011.<FWHM cut> where 2011 means 2011 data only, <FWHM cut>=cut <fwhm_major from camProcessedExp
 
+{{{
+stacktool -definebyquery -dbname gpc1 -set_dist_group NULL -set_data_group STS.reftest.20120510.c1f39 -set_label STS.reftest.20120510 -set_workdir neb://@HOST@.0/gpc1/STS.reftest.20120510 -select_data_group STS.refstack.20120510 -select_good_frac_min 0.05 -min_num 2 -select_fwhm_major_max 3.9 -select_elong_max 1.2 -set_reduction PS1_REFERENCE -simple -select_skycell_id skycell.1.03  >& stacktool.sts_reftest.20120510.fwhm39_elong12_skycell103.log
+}}}
+
+
+gpc1/STS.reftest.20120510/STS.V4/skycell.1.03/STS.V4.skycell.1.03.stk.899917.unconv.num.fits -- c1f39 (max 36)
+gpc1/STS.reftest.20120510/STS.V4/skycell.1.03/STS.V4.skycell.1.03.stk.899918.unconv.num.fits -- c1f38 (max 23)
+gpc1/STS.reftest.20120510/STS.V4/skycell.1.03/STS.V4.skycell.1.03.stk.899919.unconv.num.fits -- c1f37 (max 12)
+gpc1/STS.reftest.20120510/STS.V4/skycell.1.03/STS.V4.skycell.1.03.stk.899920.unconv.num.fits -- c0f45 (max 44)
+
+SELECT exp_id,exp_time,dateobs,zpt_obs,zpt_stdev,fwhm_major,format(fwhm_major/fwhm_minor,3) as elong,format(iq_fwhm_major/iq_fwhm_minor,3) as iq_elong,format(fwhm_major-iq_fwhm_major,2) as fwhm_iq_maj,format(camProcessedExp.bg,2) as bg,format(camProcessedExp.bg_stdev,2) as bg_stdev,format(fwhm_major_uq,2) as uq,format(fwhm_major_lq,2) as lq,n_stars,comment FROM rawExp join chipRun using (exp_id) join camRun using (chip_id) join camProcessedExp using (cam_id) join fakeRun using (cam_id) join warpRun using (fake_id) join stackInputSkyfile using (warp_id) join stackRun using (stack_id) WHERE stackRun.data_group like "STS.reftest.20120510.c1f38" group by exp_id;
+
+-- psphot on samples - run_psphot_single.csh on unconv+conv -- 
+*** faults because of modified psphot config/code to limit things -- too many peaks and faults..
+--> config setting? tag must be different than trunk at 40000 rather than 50000 -- -Di PEAKS_NMAX_TOTAL 60000
+--> unconv images still faulting.. so do pass1 only.. conv ones are poor as well, FWHM_MAJ~9-10.. 
+
+gethead -auhc *fpa.cmf FWHM_MAJ IQ_FW1
+STS.V4.skycell.1.03.stk.899917.fpa.cmf        4.405078 3.746344
+STS.V4.skycell.1.03.stk.899917.unconv.fpa.cmf 3.921824 3.04026
+STS.V4.skycell.1.03.stk.899918.fpa.cmf        4.359843 3.701267
+STS.V4.skycell.1.03.stk.899918.unconv.fpa.cmf 3.788124 2.973968
+STS.V4.skycell.1.03.stk.899919.fpa.cmf        4.184109 3.576873
+STS.V4.skycell.1.03.stk.899919.unconv.fpa.cmf 3.835106 2.939088
+STS.V4.skycell.1.03.stk.899920.fpa.cmf        4.54595 3.812682
+STS.V4.skycell.1.03.stk.899920.unconv.fpa.cmf 3.862908 3.048509
+
+
+
+-- look at stacks - bottom line, more inputs would help, but maybe this is sufficient
+--> 4.17 odd bright cell print through 
+--> 2.02 odd faint chunk print through
+--> 2.39 gap faint print through
+--> 5.06 missed burntool?
+--> 1.09,1.17 large unfilled gap
+--> 1.24 long unfilled gap
+--> 1.25,1.35 long and large unfilled gap
+--> 1.12 large unfilled cell
+--> 1.40 unfilled masking corner multi-cell
+--> 1.55 rounded edge + corner adds other exp
+--> 1.44,5.14 odd bright orphan diffspike-like unmasked
+--> 1.11 nice cluster
+--> 1.32 faint flux print through from brighter cell 
+
+
+
 
 || || || || ||
@@ -102 +148 @@
 || old STS.refstack.2011 V3  || i || 78 (4) || 1.45" ||
 
+
+
+
+-- look at Target seeing to see if any odd inputs driving 
+mysql -hippdb01 -uippuser -pippuser gpc1 -B -e 'select path_base from stackRun join stackSumSkyfile using (stack_id) where stackRun.label like "STS.refstack.20120510" and  stackRun.skycell_id like "%.1.%";' | grep -v path_base | awk '{print "/home/panstarrs/ipp/psconfig//ipp-20120404.lin64/bin/neb-ls -l -p "$1"%.log"}' | tcsh | awk '{print " cat "$9}' | tcsh | grep "Target seeing"
+--> couple with 8-9 -- #3,7 = 
+gpc1/STS.refstack.20120510/STS.V4/skycell.1.02/STS.V4.skycell.1.02.stk.902904.log -- 83 Nin, largest ~5.7 so wacky shapes then, even 2.89
+gpc1/STS.refstack.20120510/STS.V4/skycell.1.06/STS.V4.skycell.1.06.stk.902908.log -- 78 Nun, largest ~4.5 so wacky shapes..
+
+
+
+mysql -hippdb01 -uippuser -pippuser gpc1 -B -e 'select path_base from stackRun join stackSumSkyfile using (stack_id) where stackRun.label like "STS.refstack.20120510" and  stackRun.skycell_id like "%";' | grep -v path_base | awk '{print "/home/panstarrs/ipp/psconfig//ipp-20120404.lin64/bin/neb-ls -l -p "$1"%.log"}' | tcsh | awk '{print "echo "$9"; grep  -e \" Input \" -e \"Target seeing\" -e \"fwhm (psf)\" "$9" ;echo \" \""}' | tcsh  > STS.refstack.20120510_input_target_output_fwhm_inputlong.log
+
+
+
+
 ----
 = Test Diffim samples =