Changes between Version 4 and Version 5 of glga_manual

Timestamp:

Aug 19, 2016, 6:38:53 PM (10 years ago)

Author:

ehsan

Comment:

--

glga_manual

@@ +1 @@
+[[PageOutline]]
+
 
 [[Image(stv_preview2.jpg)]]
 
-== SET-UP ==
+= SETUP =
 
 Before launching the program in IDL:
@@ -65 +67 @@
 }}}
 
+
+= Manual =
+
+== Control Panel ==
+
+=== Filter ===
+
+  1. Filter: You can change the image band. If the JPG file does not exist but the fits file exists, GUI asks the user to generate the JPG file and displays it.
+  2. If the JPG file cannot be found anyway, TV does not change to the switched band.
+
+=== Buttons ===
+
+For all the buttons, you have a counterpart on the menu bar, but the opposite is not true. The letter in the parenthesis shows the short key to the same action, once you click on the image. A full set of all actions is also available on the terminal. 
+
+ 1. Change Mask: Generally, when drawing a new region to mask the image, it would be applied on all band, and its easier to look at the composite image (however you can still choose to look at other band and edit the common mask file). If a band is selected (and not a composite image), then you will have an opportunity to generate masks for the chosen band. The file that contains each band mask is stored separately. Under this button, you will see the status of the masking. 
+{{{
+ Current: All Bands: the generated mask would be used for all bands and it is displayed with Green color.
+ Current: '_band_' : the mask is generated for the specified band, and it is displayed with Pink color.
+}}}
+
+ 2. Add Region: Adding a new mask, based on the status of the label above. To choose a region, left click on the images to specify the region vertices, (or simply drag your mouse while the left mouse button is pressed). Once you are done press right mouse button to enclose the region.
+
+ 3. Undo Region: Removing the last added region. Currently this only works for common regions, i.e. green masks.
+ 
+ 4. Remove a region: After clicking on this button you need to lick inside a region to remove it. This works for both band-masks and common-mask (i.e. Green and Pink regions). If the regions does not exist (in case of any mistake), the action would be ignored. 
+
+ 5. Clean all regions: After user verification, it removes all the region. This works for both band-masks and common-mask (i.e. Green and Pink regions).
+  
+ 6. Save region: Normally all common-regions (Green reg.) would be saved after doing the measurement. However, once can save any change before doing the measurement. This is helpful when working with big galaxies. One should note that all band-masks are stored instantly and users should not be worried about saving their pink masks. This is because, we don not expect to have a lot of masking for each individual mask.
+
+ 7. 
+