IPP Software Navigation Tools IPP Links Communication Pan-STARRS Links

source: trunk

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @20966   18 years jhoblitt update
(edit) @20965   18 years jhoblitt first attempt at supporting multiple databases
(edit) @20963   18 years Paul Price Soften errors during iteration. Without this, it gets the wrong solution.
(edit) @20961   18 years Paul Price Adding diffraction spike rotatory angle zero point. Calibrated from a …
(edit) @20960   18 years Paul Price Sense of Theta wrt ROTANGLE was wrong.
(edit) @20953   18 years Paul Price Added photometric determination and measurement clipping for relphot. …
(edit) @20952   18 years bills remove unneeded line
(edit) @20951   18 years Paul Price Adding rotator angle concept.
(edit) @20950   18 years eugene convert ROSANGLE to ROTANGLE
(edit) @20949   18 years Paul Price Adding iteration on relative photometry. Still need to add rejection …
(edit) @20948   18 years Paul Price First cut at relphot. Still needs work, but basics look OK.
(edit) @20947   18 years Paul Price Forgot to allocate mag, magERr.
(edit) @20946   18 years Paul Price Adding first cut at code to match sources, in preparation of doing …
(edit) @20945   18 years Paul Price Adding required headers
(edit) @20944   18 years Paul Price Fixing cut/paste error
(edit) @20943   18 years bills add some timers
(edit) @20942   18 years bills Run magic.destreak.load once a minute because it is expensive. Set …
(edit) @20941   18 years bills fixed error in filename. If output directories don't exist do mkdir -p
(edit) @20940   18 years Paul Price More detail in debugging output.
(edit) @20938   18 years eugene do not fit known CRs in FitSourcesLinear; defined a new CR masking …
(edit) @20937   18 years eugene changing pmPeaks to contain a pointer to pmFootprints, which just …
(edit) @20936   18 years eugene big update from eam_branch_20081124 with updates to Opihi math
(edit) @20935   18 years eugene adding IMAGEID and SOURCEID to dvo.config
(edit) @20934   18 years eugene adding dummy values for chip_imfile_id, warp_skyfile_id, diff_skyfile_id
(edit) @20933   18 years eugene adding auto_incr fields for table ids; adding upgrade mode
(edit) @20932   18 years eugene adding chip_imfile_id, warp_skyfile_id, diff_skyfile_id
(edit) @20931   18 years eugene adding ippdb.pl
(edit) @20930   18 years eugene adding warp_skyfile_id argument; get source_id from ipprc->source_id
(edit) @20929   18 years eugene get source_id from ipprc->source_id
(edit) @20928   18 years eugene adding diff_skyfile_id argument; get source_id from ipprc->source_id
(edit) @20927   18 years eugene adding chip_imfile_id argument; get source_id from ipprc->source_id
(edit) @20926   18 years eugene add source_id method to lookup database id from ippadmin and merge …
(edit) @20911   18 years Paul Price Must have thought I was writing python..…
(edit) @20910   18 years Paul Price Adding mode to allow creation of large holes (attempting to simulate …
(edit) @20909   18 years Paul Price Turning off automatic queuing of magic: not ready yet.
(edit) @20889   18 years bills updating some config files for simmosaic camera
(edit) @20888   18 years Paul Price Fixing definition of RMS.
(edit) @20887   18 years Paul Price Need to read the headers when opening, so we can have the concepts …
(edit) @20886   18 years bills Change simmosaic to use split format
(edit) @20885   18 years Paul Price Adding stats file.
(edit) @20884   18 years Paul Price Whoops, wrong type.
(edit) @20883   18 years Paul Price Fix for when there are no pixels to inspect (e.g., threshold set …
(edit) @20882   18 years eugene kapa should not use X here
(edit) @20881   18 years Paul Price Need to quote skycell.
(edit) @20880   18 years eugene added CR NSIGMA softening parameter
(edit) @20879   18 years Paul Price Turn off automatic diff for simtest.stack. Didn't have the exposure …
(edit) @20878   18 years eugene soften by adding to the variance, not the error
(edit) @20877   18 years Paul Price Correcting "mis-match in filter and exptime lists"
(edit) @20876   18 years Paul Price Adding setup for testing stacking: short/long exposures, dark/bright …
(edit) @20875   18 years Paul Price No need to run magic just yet
(edit) @20874   18 years Paul Price Adding 'large' simtest: using a large area.
(edit) @20868   18 years Paul Price Removing apparent debugging statement.
(edit) @20867   18 years Paul Price Fixing variable names.
(edit) @20866   18 years Paul Price Adding softening parameter for weights.
(edit) @20865   18 years Paul Price Add softening parameter to weights when calculating crNsigma.
(edit) @20864   18 years Paul Price Removing debugging statement from production.
(edit) @20863   18 years Paul Price Don't destroy information in pixels that are masked --- just subtract …
(edit) @20858   18 years eugene need to have the mosaicname
(edit) @20855   18 years bills add missing semicolon
(edit) @20854   18 years eugene distinguish server busy messages…
(edit) @20853   18 years Paul Price Changing rule for simtest photcode so that detector and sky are …
(edit) @20852   18 years Paul Price Adding simtest skycell photcodes
(edit) @20851   18 years Paul Price Allowing use of filenames other than Nebulous.
(edit) @20850   18 years Paul Price I'll get it right eventually.
(edit) @20849   18 years Paul Price Whoops.
(edit) @20848   18 years Paul Price %ld does not always correspond to S64.
(edit) @20847   18 years Paul Price Setting stage_id, cam_id to avoid compiler warning "may be used …
(edit) @20846   18 years bills forgot to add this file
(edit) @20845   18 years bills set extname
(edit) @20844   18 years bills correct handling of compression parameters when it's turned on or off
(edit) @20843   18 years bills progress
(edit) @20842   18 years bills forgot to init the chip level astrometry when bilevelAstrometry
(edit) @20841   18 years bills Add the stage_id and cam_id to magicDSRun. This vastly reduces the …
(edit) @20838   18 years Paul Price Ensure thread jobs have the expected type when harvesting.
(edit) @20837   18 years Paul Price Ensure thread jobs have the expected type. Harvest the INSPECT jobs.
(edit) @20836   18 years bills add magicdstool
(edit) @20835   18 years Paul Price Ensure everything is harvested, even if threads are off.
(edit) @20834   18 years Paul Price Ensure all jobs are harvested before returning.
(edit) @20833   18 years Paul Price Moving annoying trace to higher level.
(edit) @20832   18 years Paul Price Turn psImageConvolveMask threads on/off as required, and set back when …
(edit) @20831   18 years Paul Price Fixing function name
(edit) @20830   18 years Paul Price Return old threading status so it can be restored.
(edit) @20829   18 years Paul Price psphotInit should not turn on threading for psImageConvolveMask …
(edit) @20828   18 years Paul Price Turn off mask application (setting value of masked pixels to NAN).
(edit) @20827   18 years eugene working on double vectors, other additions
(edit) @20826   18 years Paul Price Wasn't setting IMNAXIS[12], just working out what the values were …
(edit) @20825   18 years uid1587 Add PSASTRO.OUTPUT.MASK
(edit) @20824   18 years Paul Price Adding helpful comment.
(edit) @20823   18 years bills allow queueing of magic runs by label
(edit) @20822   18 years bills re-enable de-streaking of mask and weight images if output …
(edit) @20821   18 years eugene fixed equiv photcode values
(edit) @20819   18 years eugene handle errors in dbCheckStack
(edit) @20818   18 years eugene handle named photcodes, error handling
(edit) @20817   18 years bills added usage
(edit) @20816   18 years bills Added a program to replace streaks and to compare two image files …
(edit) @20815   18 years Paul Price Need to quote string.
(edit) @20814   18 years Paul Price Adding restriction on class_id.
(edit) @20813   18 years bills change error for empty filesets to one that doesn't get cleared by …
(edit) @20812   18 years Sebastian Jester Add zeropoint for new average u filter
(edit) @20811   18 years Paul Price Allow products to be specified.
Note: See TracRevisionLog for help on using the revision log.